WIndows 8 App - HP Scan and Capture

HP has released a cool new app for scanning on Windows 8.  If you have a copy of WIndows 8, you can download HP Scan and Capture from the Microsoft Store or by clicking on this link:
http://apps.microsoft.com/webpdp/en-US/app/hp-scan​-and-capture/94fffdd0-bb3b-4adc-96ca-24c1d79e16c6
The official list of supported devices is:
HP Color LaserJet CM1410
HP Color MFP 100
HP Deskjet 3050 J610 series
HP Deskjet 3050A J611 series
HP Deskjet 3070 B611 series
HP Deskjet 3520 series
HP Deskjet 4620 series
HP Deskjet 5520 series
HP ENVY 100 D410 series
HP ENVY 110 series
HP LaserJet 200 color MFP M275
HP LaserJet 200 color MFP M276
HP LaserJet 400 MFP M425
HP LaserJet M1530
HP LJ300-400 color MFP M375-M475
HP Officejet 4620 series
HP Officejet 6500 E710a-f
HP Officejet 6500 E710n-z
HP Officejet 6600
HP Officejet 6700
HP Officejet 7500 E910
HP Officejet Pro 8500 A910
HP Officejet Pro 8600
HP Photosmart 5510 series
HP Photosmart 5510d series
HP Photosmart 5520 series
HP Photosmart 6510 series
HP Photosmart 7510 series
HP Photosmart Plus B210 series
Please try it out if you have one of the supported devices and let us know what you think!
Although I am an HP employee, I am speaking for myself and not for HP.
This question was solved.
View Solution.

Could it be that the App isn't there for me - I am in the UK, and I don't get any chance to install from the Store (or from your link).
Best regards,
Jeff

Similar Messages

  • Officejet Pro 8600 e. Problem scanning from Scan and Capture App in Win 8.1

    Officejet Pro 8600 e.  New.
    Installed on HP Envy 23 Touch. Running Windows 8.1.  
    Wireless set up. Prints fine.  Problem is scanning from the HP Scan and Capture Software App in Win 8.1  
    Using Scan and Capture App I can scan photos fine.  They come out clear.  Scanning documents in GRAY has multiple bands/lines in gray over the entire page running vertically.  Scanning documents in COLOR are fine.
    Also, if I scan from the printer directly using the touch screen on the printer, the scan output is fine.
     I did the Scan utilty to discover any errors and it did not show any.  I think it's a software error.  I am going to uninstall the HP Scan App and then reinstall.  So, I will do the uninstall/reinstall and report back.
    Also, I would like to know if there is a desktop program for scanning?  I would prefer to use that instead of the Modern HP Scan and Capture App.
    Thanks....
    This question was solved.
    View Solution.

    Hi artrum,
    I understand you've been experiencing issues scanning from your Officejet 8600 using the Windows Scan and Capture program. I will certainly do my best to help you with this!
    From what you've explained, I believe you're correct, it does seem like it's an issue just with the Windows Scan and Capture program and as you've been able to scan from the front panel of the printer you definitely have the HP software installed. What I'd like to do is have you use the HP Scan software, where you should no longer run into issues.
    To access the HP Scan software and be able to access it easily from your desktop I'd like you to follow the steps below:
    1. Go to your start screen and just start typing File Explorer. You should be able to then open it to access your computer's files.
    2. Then open Local Disk (C: ), followed by Program Files (x86), followed by HP, then HP Officejet Pro 8600, followed finally by bin.
    3. In the bin folder you should see HPScan. You will want to right click on HPScan and go to Send To and then select Desktop.
    Now you should see HP Scan on your desktop and be able to open it and scan through that application.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Scan and Capture minimizes to taskbar immediately and does not allow scan selection

    Scan and Capture was working great prior to upgrade to Windows 8.1 and (I think) and upgrade to V1.4.  I vaguely recall using some app from HP to uninstall the previous version... 
    Current symptoms are that the app will fire up, briefly show the splash screen, and then immediately minimize to the task bar.  Clicking on the app in the task bar will bring the splash screen back up briefly, followed by minimization again to the task bar.  The app can be closed by right clicking the app on the task bar.
    I have uninstalled the app and reinstalled to no avail.  My guess is that there is some registry junk left behind during the uninstall that needs to be scrubbed.  Probably a function of the uninstall of the previous version?
    App works just fine on another Win8.1 PC with the same printer, so I doubt it is a hardware or network issue, however, for completeness, the scanner is an HP CM1312nfi MFP and the PC is an HP Pavillion, [email protected], 8GB RAM, running 64 bit Win8.1 Pro with Media Center.
    Thanks for any pointers.

    To follow on...
    I reinstalled the Complete Package.  Subsequent to this install, the legacy HP Laserjet Scan (with UI from 2009) and the legacy Windows Scan and Fax applications connect and scan from this MFP just fine.
    The Metro apps (Windows Scan and HP Scan and Capture) do not.  The Window Scan (Metro) gives a "Problem Connecting to Scanner" error. 
    The HP Scan and Capture has the same behavior as before -- splash screen for a second and then minimized to the task bar.  I have also tried to launch HP Scan and Capture from the HP AiO Metro app with the same results.
    To sum up, the WinXP applications work.  The Win8 applications do not.
    Junk in registry?  Or driver issue?

  • HP Scan and Capture collate

    I'm using the HP Scan and Capture app on an HP Envy desktop using Windows 8.1 and an HP Officejet 6500A Plus multi-function scanner.
    When I do a two-sided scan using Scan and Capture it doesn't collate the pages.  For example, if I have a four-page document the page order will come out as 1-3-4-2.  I then need to isolate p. 2 and drag it to the proper spot. 
    This is a nuisance for a four-page document, and it is unworkable for a 25-page document.
    The work-around is to use the printer's native software, which does properly collate two-sided documents.  However, the native software is not as user-friendly as Scan and Capture.
    I thought the new HP app working with a new HP Envy with an HP scanner should be able to handle the collate function.  Am I missing something here?

    Hello Aprun,
    Welcome to the HP Support Forums!
    I have tried this on my lab equipment and came up with the same results. It would appear that you have found out the best work about for this issue. If anything changes with this, I will let you know.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Scan and Capture Can't change the location that scanned documents go to

    I just upgraded to Windows 8.1.  I scanned a word document using HP Scan and Capture and the default location to save files is now "This PC".  I can see the folders under "This PC" and can save the document to one of the folders, but I can no longer browse to anything else.  If I click on This PC, I have the option to go to OneDrive, This PC or Network.  
    If I click on Network - I can type in \\mycomputer but it just let's me select a folder.  I'm trying to get to an external hard drive and I've tried typing \\external drive,  \\f, \\f:, \\f:\
    Anyone have any suggestions? I've gone to the preference section of HP Scan and Capture and when I select that I want to change the default location where I save the files, it puts me back to the This PC area.

    Hello mnmjackson, and welcome to the HP Forums.
    I see you are running into issues with your scans save location.  I would like to try and assist.
    I would recommend creating a new destination folder, and manually type out the full file path.
    Please let me know if you have any questions.  Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Windows 8.1 Deploy and Capture stops with no error

    I have a standard deploy and capture TS for Windows 8.1 using the volume media 'install.wim' file.
    The only modification I have made is to add a few applications into the TS.
    Once started from WinPE, the TS goes smoothly, deploying the OS and the applications. It then restarts and just goes to the login prompt. The TS doesn't continue as expected, rebooting to WinPE and running the capture.
    I've checked the smsts.log file and I cant see any obvious errors or anything that could cause this behaviour. The only warning I can see is 'Active reqeust handle is empty, registering with new active request handle' though I'm not sure if this is even
    related.
    So the process I see is:
    Boot to PXE WinPE
    Select build and capture TS for windows 8.1
    Install OS
    Install Apps
    Restart
    Login screen
    Anyone have any ideas?
    SCCM 2012 R2
    Windows 8.1 Professional

    Found the solution.
    Was due to one of the apps I was installing requiring .NET 3.5. 

  • Windows App developer account and .aetx file, Unknown error while generating AET

    Hi Everyone,
    firstly, sorry for my not perfect english, but I hope that somehow understand what i  want to say.
    So, I am a student (I do not know if it makes a difference but inform you), and I wanted to write a universal windows app for company (This would be the first application WP and Windows this company, previously did app on Android and IOS, and websites).
    I wrote a little bit and I wanted to throw the first version on hockeyapp.net to the head of the company and the customers can test it and i have problem. I upload .appx file bu i have problem with generate .aetx file. When I run this command AETGenerator.exe
    PFXFilepath PFXFilePassword it gives me an error in command prompt
    Unknown error while generating AET
    startIndex cannot be larger than length of string.
    Parameter name: startIndex
    I've read about these certificates but did not find a specific answer (a very specific answer). So what I need to do, What do I need,  what to buy and etc.
    What are my solutions?
    What should I do?
    Is it enough that I register and I buy individual developer account?
    I hope someone answer me, 
    thank you :)

    Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
    Another member has same question.
    https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
    If you want to test your app, you can also send to beta store and you can get response from the testers.

  • WINDOWS wants to scan and fix IPOD Shuffle

    My Shuffle worked flawlessly on my old laptop running Windows XP but now on my new laptop running Vista, a window keeps coming up asking me if I want to scan and fix my IPOD. I click continue without scanning and the IPOD usually works OK with Itunes but that window comes up everytime I sync the IPOD with Itunes.
    Occasionally, the IPOD will have trouble syncing with Itunes. I restored the unit but that didn't eliminate the problem. I haven't reset the unit yet - not sure if that will help given that a full restore didn't help....
    I believe that WINDOWS may think that the IPOD is a USB drive rather than a IPOD.....
    Ideas?
    Message was edited by: mark069

    the fix here worked for me: http://www.futureofrealestatetechnology.com/general-real-estate-technology/resol ve-vista-scan-and-fix-error-when-plugging-in-ipod-or-other-devices/comment-page- 2/
    in short open a command prompt and type "chkdsk g: /f"
    replace the "g:" with the drive letter of your ipod.
    this worked for me.

  • Windows 7 64bit Build and Capture Task Sequence keeps failing. Need to Offline Patch

    Hi All,
    I have been having problems running my SCCM 2007 R3 Build and Capture Task Sequence for Windows 7 64bit since MS released the October 2014 patches. (Having problems described in KB2894518, but can't get workaround to work)
    So my next step is to try to apply the patches directly to the install.wim file using dism and "Offline Servicing". I'm hoping this will allow my TS to finish, and also adds the benifit of making my TS much faster to run every month. So I followed
    the steps in
    this post, and injected 165 updates into the install.wim file (extracted from Win7 ISO). Now, I've copied the updated WIM into my Operating System install package and updated the distribution point. But the Install Software Updates step still installs 160
    updates (same as before the Offline patch injection). The only thing that seems faster is that the download of the updates is instantaneous. So it seems like the Offline patch injection just copied the patch installer files to the WIM, but did not actually
    install them.
    I remember reading a post by Niall C. Brady or Jason Sandys about exactly how they inject patches into a WIM, but have been unable to re-locate the post. Does anybody out there have a tried and true method for offline injection of patches into install.wim
    for use with SCCM Build and Capture task sequence? thanks!

    My recommendation would be to use MDT to build your images instead:
    http://technet.microsoft.com/en-us/library/dn744290.aspx
    This will make your life much easier with the patching of the image :)
    You can use Nickolaj's great MDT Factory tool to set up an MDT Build machine from scratch:
    https://gallery.technet.microsoft.com/MDT-Factory-Tool-100-8e68123b
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • Microsoft Surface Windows 8.1 Sysprep and Capture

    SO I have a peculiar issue. I am trying to Sysprep and Capture and MS Surface Running Windows 8.1 (Pro or Enterprise). I am able to DEPLOY images but I am unable to capture. The problem is I get no errors. I select the task sequence and it starts running
    and then it gets to the configure phase and the next phase is Copy Sysprep Files. It appears to be skipping that, but it jumps right to the end and then says, Completed successfully and there are zero errors. Clearly it didn't do anything, but I don't know
    how to trouble shoot it with no errors.
    Any ideas? Thanks

    From another TechNet post -
    [Settings]
    Priority=TaskSequenceID,
    Default
    Properties=MyCustomProperty
    [Default]
    _SMSTSORGNAME=Running %TaskSequenceID%
    OSInstall=Y
    TimeZoneName=Eastern Standard
    Time
    SkipAdminPassword=YES
    SkipDomainMembership=YES
    SkipLocaleSelection=YES
    SkipProductKey=YES
    SkipTimeZone=YES
    SkipUserData=YES
    ApplyGPOPack=NO
    [MYTASKID]
    _SMSTSORGNAME=Image Creator
    DoCapture=YES
    BackupFile=Reference.wim
    BackupLocation=NETWORK
    BackupShare=\\MDTSERVER\Reference$
    BackupDir=Captures
    Where [Default] would have your domain join information and [MyTaskID] is your TSID for your capture sequence.  Then when you select the capture sequence, it will instead select the non domain join option and capture your image.  Good luck.

  • Windows Apps Not Launching and Store Not Functioning (with logs).. to do with "Local AppData"

    I keep my "Local AppData" folder along with a handful of other settings folders on a separate SSD so I can format monthly without losing a beat.
    I notice that each time my Local AppData folder is located anywhere other than it's normal location, Windows Apps do not launch and the store produces the "Your purchase couldn't be completed" error.
    Two of my friends do the same thing that I do and have the exact same result.
    Event Viewer Logs (on launch of App):
    "Activation of app Microsoft.XboxLIVEGames_8wekyb3d8bbwe!Microsoft.XboxLIVEGames failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational log for additional information."
    "Faulting application name: wwahost.exe, version: 6.2.9200.16384, time stamp: 0x50107c6e
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
    Exception code: 0x00000004
    Fault offset: 0x00000000000189cc
    Faulting process id: 0xc8c
    Faulting application start time: 0x01cda64746053be3
    Faulting application path: C:\Windows\system32\wwahost.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 83b3360f-123a-11e2-beb4-485b394307b9
    Faulting package full name: Microsoft.XboxLIVEGames_1.0.928.0_x64__8wekyb3d8bbwe
    Faulting package-relative application ID: Microsoft.XboxLIVEGames"
    "The App Host could not start because the web module 1::Windowing::Initialize failed with 0x0x80070005."
    Any ideas?  Anyone else with this problem?

    Hi,
    This is by design, seems Windows App cannot allow to change the location of Local Appdata.
    Juke Chou
    TechNet Community Support

  • Windows asking for "scan and fix" on iTunes synch

    I just installed a Shuffle (3rd gen) and everytime I hit "synch" I get Windows7 asking can it run scan and fix errors on it. The one time I said yes, it "fixed" files which caused half of my capacity to be unusable "other". I had to reset.
    Anyone know what to do?

    the fix here worked for me: http://www.futureofrealestatetechnology.com/general-real-estate-technology/resol ve-vista-scan-and-fix-error-when-plugging-in-ipod-or-other-devices/comment-page- 2/
    in short open a command prompt and type "chkdsk g: /f"
    replace the "g:" with the drive letter of your ipod.
    this worked for me.

  • Need to have pop up window in selection screen and capture the user action.

    Hello Friends,
                         I have a requirement, that need to show a pop up window after execution, and to get the action from user using a Push button.
    I create a selection screen and a sub screen as window.
    After user execute from the selection screen, I am popping up this window.
    Window contains some input values to be entered and push button to identify the user action.
    I try to capture the user action using sy-ucomm, but it does not hold any value when user press the button.
    How to overcome this issue.
    Here is the definition of the window.
    Pop Up Window for getting values
    SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW TITLE title .
    PARAMETER : p_vdate LIKE t9aa01-validfrom,
                p_dcggt LIKE t9aa01-hkont,
                p_dcgst1 LIKE t9aa01-hkont,
                p_dcgst2 LIKE t9aa01-hkont,
                p_na LIKE t9aa01-hkont.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 20.
    SELECTION-SCREEN PUSHBUTTON 2(10) text-001 USER-COMMAND SVE.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF SCREEN 500.
    Cheers,
    Senthil
    Edited by: Senthil on Jan 7, 2008 11:03 AM

    Hi,
    Try using the below code.
           data : w_var type string.
           CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
             EXPORTING
              DEFAULTOPTION        = 'Y'
               textline1            = 'test '
             TEXTLINE2            = ' '
               titel                = 'check'
             START_COLUMN         = 25
             START_ROW            = 6
             CANCEL_DISPLAY       = 'X'
            IMPORTING
              ANSWER               = w_var.
                     if w_var = 'J'.
                     else.
                     endif.
    Comments : J indicates Yes and N indicates No
    Regards,
    Jeswanth

  • Apple vs Windows - print quality, scanning, and print preview

    I use an old Epson A3 Photo (1290) to produce very high quality prints as artists' limited edition cards. From Windows the print quality is fantastic, but printing the same page from the Apple (to the same printer) the print quality is terrible. Anyone have any idea what the problem is?
    Also the Epson and my two Canon printers offer a print preview from the printer driver, which has saved me many a duff printout. I can't find the same option from Apple (for the same printers). Is there a solution?
    Finally - I have a high-quality Epson Scanner, the 4870 Epson Perfection. It came with EpsonScan, a very nice program I've used for many years. The Apple image capture is pretty pathetic in comparison. Anyone have a better suggestion? Surely there must be one with good functionality and flexibility. (I tried installing EpsonScan to the Apple but for some reason it can't see the scanner, even though it is plugged in.)

    I'm using Apple's Epson print utility for the Epson which I downloaded as a software update when I connected the printer, and the Canon ditto. I have finally managed to find the paper types and print options, though not a print preview atm - the problem may be the software I'm using (QuarkXpress), as there was definitely a print preview from Open Office. I'll continue looking into it.
    Thanks for pointing me at Vuescan - it looks great.

  • Windows antivirus software scanning and OS X partition

    Do the the various Windows antivirus software programs (Security Essentials in particular) scan or muck around with the OS X partition at all?

    No

Maybe you are looking for