Windows 8 Boot Camp on MBP early 2011
Hello,
I'm on a MacBook Pro 13" early 2011, and I've just upgraded to OS X Mountain Lion 10.8.3, which should support Windows 8 via the new Boot Camp software. However, I've tried to download the new Boot Camp drivers using "Boot Camp Assistant" but the utility says that on my Mac only Windows 7 is supported. Is this true, or there is a work-around to upgrade the existing Boot Camp utility?
I also have a MacBook Pro 13-inch, Early 2011, and have upgraded to OS X 10.8.3. I attempted to install Windows 8 via the "Boot Camp Assistant" utility application, and received the "Your Mac only supports Windows 7" message when attempting to "download the latest Window support software from Apple."
According to this Apple support article, the early 2011 13-inch MacBook Pro should be capable of running Windows 8 (64-bit) with Boot Camp 5: http://support.apple.com/kb/HT5634
Apparently this is a glitch in the Boot Camp Assistant, as I've read of it affecting even newer MacBooks. With the "Your Mac only supports Windows 7" message, I was uncertain that Boot Camp Assistant would download the correct set of drivers for use with Windows 8. Instead I went to this page: http://support.apple.com/kb/DL1638 and downloaded the Boot Camp Support Software there. I followed the directions to copy the contents of the downloaded .zip file to the USB flash drive. Then I used Boot Camp Assistant to install Windows 8 after deselecting the "Download the latest Window support software from Apple" option. After Windows 8 was installed and opened then I opened the Boot Camp folder on the USB drive and double clicked on "setup.exe". Windows 8 has since performed flawlessly on my MacBook Pro, so I believe this to be a suitable work around. Hopefully Apple will soon correct the flaw in the Boot Camp Assistant.
Similar Messages
-
Can't re-install windows 7 64-bit on MBP early 2011 after Mavericks
I have an early 2011 Macbook Pro 13 inch which I used to have Mac OS X 10.8 and Windows 7 64-bit prior to installing Mavericks. After the update, my windows partition, which i resized to a larger space using Disk Utility and then a third party software on the windows side; was gone. It was shown in the disk utility as an unmountable partition.
After several failed attempts to get my files back, I decided to start from scratch. But when I went on Bootcamp 5, the "Create a Windows 7 or later version install disk" option was gone. After about searching for a way to re-enable that option by adding lines on Boot Camp Assistant's info.plist file, and signing it from terminal, the option was there again. It let me create a windows install disk from an ISO, and partition my harddrive. But when I reboot my computer and pressing alt, the usb stick doesnt appear as a bootable drive. So I Installed rEFIt. I could locate my usb drive from it but when I click on the corresponding button (it was something like boot windows from WININSTALL), it says bootmgr is missing.
The next day I got blank DVD-R's so I could burn the ISO on a disc. It successfully booted from the CD. To intall it on the bootcamp partition, I had to format it to NTFS using the windows 7 installation software. But when it comes to intallation, while expanding the installation files, I get an error from the Windows side saying that the files could not be expanded.
I tried to run the USB stick on a mid 2012 macbook pro which worked. I have no idea what has happened with my macbook HDD since the Mavericks update. Does it have something to do with the partition table? I am usually a non-participant user of the support communities and this is my first post. I hope to come up with a solution as soon as possible.
-OrkunHey there, it sounds like the trouble you are having is related to what is called 'non-standard boot camp partitioning' (resizing of the partition and all that). Do you notice that when launching Boot Camp Assistant you have the option to remove the current boot camp partition? If so I would say remove the partition and reinstall Windows using BCA (any other way of installing Windows on a Mac may cause you grief in the future).
Also I believe installing from an ISO is unsupported on some models - ultimately the difficulty you are having is related to partitioning. If Boot Camp *will not install* with the current partitioning the best thing to do would be to create a full Time Machine backup, repartition the disk from original install media (from 'current' to '1', reinstall the original OS and perform Mavericks upgrade via the Mac App Store, migrate from Time Machine backup and reattempt running Boot Camp Assistant (which will work this time). Maybe someone else has a quicker/hackier method but you can always expect difficulty with OS upgrade installs and Boot Camp while the partitioning is in the current state. -
I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,
Not sure if this will help anyone, but I had trouble installing on 10.8.
I then found this particular support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
I use the printer through usb but my wife uses wireless from her PC laptop.
Andre Francis -
Hello,
I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting. I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
Thank you and please ask any questions!Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.
-
GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx -
New Retina MBP + Windows 7 boot camp = no nVidia GPU
I'm hoping someone will correct me wrong on this...
I have a brand new 15" Retina MBP 2.6GHz 16GB RAM 500 SSD.
After finally getting Windows 7 SP1 installed (along with countless updates ) and boot camp 4.0, I have noticed some display problems. My only reslution options are: 1600x1200 (which looks stretched), 1280x1024 (reallly stretched), and lesser resolutions with which I didn't bother. This didn't seem to make sense given the nVidia 650M.
Also, NONE of the external video ports are working (Thunderbolt to DisplayPort, HDMI to HDMI, HDMI to DVI) -- they're simply not getting a signal at all.
So I went into device manager, and the 650M is not even showing up as being installed! All I see is "Standard VGA Graphics Adapter", which tells me Windows is only acknowledging the integrated Intel graphics.
I can't simply install an nVidia driver, as it can't see the device onto which that driver would be applicable.
I assumed this was an issue of the "automatic graphics switching." Apple confirmed this, telling me that Windows doesn't have an option to choose between displays. I couldn't find a way to trigger it with any third party app, either (including Adobe After Effects).
Further, Apple claims 64-bit drivers aren't yet available for this GPU, so even if I could switch it over, I'd have to step down to a 32-bit install.
So, basically, my boot camp side looks like a netbook.
I cannot be the only one experiencing this!
Thanks in advance,
AndrewPaul22 wrote:
You can't install the windows support software before you partition. 1. Start boot camp in OS X and create the windows support CD; 2. Install windows using boot camp; 3. Install windows support software from the CD that you made.
I followed the boot camp manual exactly and the Nvidia drivers were not installed. I had to go into the Nvidia drivers directory in the windows support CD and manually run the setup.exe file. After that, the drivers were installed.
Note: when you create your windows partition in boot camp, you will select custom, and then format. It is critical that you format your boot camp partition and not your OS X partition. It will not say boot camp, but you can tell it's the right one by its size. For example, if you selected a 40 GB size for boot camp, the size of the drive you select to format should be 40 GB.
Paul
That is exactly what I said, are you sure you wanted to reply to me?
FYI, In a normal Bootcamp installation the partition will be named Bootcamp -
I had a partioned HDD 250 gb Mac and 250 gb Windows. I have uninstalled Windows with boot camp but still dont have the extra 250 gb available. What to do now?
You need to remove the partition you created when you set up BootCamp.
http://www.macworld.com/article/1156195/delete_boot_camp.html -
How can I get Windows 7 Boot Camp to find my Magic Mouse?
Hey!
So I just bought a Magic Mouse and it works flawlessly in OS X.
But when I use Windows 7 Boot Camp I can't find the mouse to add it as a new device. My bluetooth works just fine and I have the Boot Camp 3.3 drivers.
I tried rebooting, turning the mouse off and on, read a bunch of guides on the internet but no one is having issues CONNECTING the mouse, only getting it to work, so my research is proving to be hard.
Can you guys help me?
Thanks!Hi Maia,
Can you please mention your MAC model (MBA 2011, MBP, iMac?). Which OS X version?. Have you problems pairing other bluetooth devices?
You may want to try the following setps.
1.- First make sure that you have the latest EFI and software updates. Including latest bootcamp bluetooth drivers.
2.- Unpair MM in Mac OSX
3.- Do a Nvram and SMC reset:
http://support.apple.com/kb/ht1379
4.- Restart
5.- Pair your MM under Mac OSX
6.- Boot on Bootcamp assiging bootcamp as a starting partition
7.- Add your device.
Let me know if that worked, there are another tricks you can try but I need additional information. -
Windows 7 Boot Camp no longer recognize my wireless mouse and Keyboard?
I have a mid 2011 27in iMac on 10.9.1 and I run Windows 7 via boot camp, sometimes Parallels as well. Today I tried to boot up in to Windows via Boot Camp, but I can not control the cursor or input anything via kayboard. This has happened before and I only got it working again after reinstalling Windows, which I am REALLY trying to avoid
The thing is, when I boot in to Windows, it is definitely responding to the keyboard when I hold F8 to go in to safe mode, but once the desktop loads up, I lose any function of mouse or keyboard. Even when I try to manually add a device using a USB mouse, it is not detecting any wireless device.
Both my Magic Trackpad and Wireless Keyboard work fine in OS X, Windows 7 when in Parallels and works during the start up of boot camp, but not when Windows 7's desktop boots up.
Any help would be greatly appreciated!Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install -
Red Alert 2 on Windows 7 Boot Camp
New MBA 13" 2011.... Installed Windows 7 (Boot Camp) with latest Windows Support tools/drivers from Apple. Install Red Alert 2 the game but get a graphic glitch where the videos and user menu isn't displayed.
Anyone help?I ran the automatic setup, I did notice that there was an ATI folder there, however I thought the graphics were Intel graphics not ATI on the new MBAs.
-
Loading into Windows 7 (Boot Camp) takes really long.
Hello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
XavierHello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
Xavier -
Wifi under windows 7 boot camp keeps dying
I have been running windows 7 64 bit under Boot Camp for just under a week, and last night have started to have some pretty serious issues with the built in wifi.
Periodically, without any consistent cause, when I am booted into Windows 7, my internet connection begins to degrade. Not disconnect or anything, just taking on like 60% packet loss or more, pings to both my default gateway (the wifi router) as well as to anything further out on the internet. My ipad, iphone, macbook pro are all fine and able to use the internet at the same time without issue, its only the imac booted into Windows 7. I can reboot with no change, still completely unusable (unable to load even a single web page) for Windows 7. reboot to OSX, no issues. Its not the router, or the ISP, its JUST when I'm in win7 using wifi. I've changed IPs, used a static DNS, measured wifi, etc. I was using this setup for almost a week before the issues started, and I'm assuming its something wrong with Windows7. Fully patched and up to date, both OSX and Win7.
I finally figured out that I can temporarily fix the problem by resetting the driver for the wifi interface under the Network Adaptor troubleshoot wizard in Windows, this buys me between 5 minutes to half an hour before the issue starts up again. Nothing else I've found will fix the issue even temporarily.
I finally ran a 50 ft ethernet cable from the imac to the router and this has for now solved the intermittent issue, but its not sustainable this way as I cannot leave the cords like this. But clearly there seems to be an issue with the wifi driver in windows that boot camp is using.
Can anyone provide some suggestions of what to look for within windows or a way to debug this more directly? I used the BootCamp assistant to burn a DVD of drivers at install time and I believe they were the most recent versions, but not sure how to check further. Device manager reports I am using the Atheros AR938x Wireless adaptor, and this is a mid-2011 27" iMac running Lion.I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15". -
Windows 7/Boot Camp/SSD SATA3 install problems
Hi there,
I just registered to this community having bought a MacBook Pro 17" on Friday. The aim was to immediately upgrade the stock 5400 rpm drive with 120 GB SSD SATA 3 drive. I installed a brand-new Corsair Force Series 3 120gb SSD but that drive was not even recognized by the Install DVD disk utilities. So I gave up on that one. I then tried an OCZ Vertex 3 and that was recognised immediately. I managed to install Snow Leopard no problems. The problem came when I tried to install Windows 7 using Boot Camp. It's important that I can have access to Windows 7 more than OS X at the moment as I am mainly a Windows user. 12 hours later I still hadn't managed to install Windows 7 after numerous attempts. The various problems included Windows 7 unable to format the drive. Also when I did manage to install Windows 7 it never quite completed the install or would freeze on the starting Windows screen. I managed to get into the Windows 7 installation a couple of times but then the whole shebang would freeze when I tried to install the Boot Camp drivers. Upon rebooting I would not be able to boot back into the Windows partition again. I was rapidly losing the will to live. So I gave up on the OCZ SSD drive as well.
This morning as a last resort I installed an older Corsair Force Series 2 SSD 60 GB drive as an experiment. It was recognized immediately by the disk utilities unlike the Series 3 version and I managed to install Snow Leopard and Windows 7 via Boot Camp with zero problems. So it all up and running. Obviously the hard drive is much smaller than I wanted. But it proves one thing and that is that support of popular brands of SSD SATA 3 drives in the MacBook Pro 17" version is flaky to say the least and on the tests I did using two of these drives it was impossible to install Windows 7 using Boot Camp.
If anyone else has experienced similar problems I'll be interested to hear.
Regards
KraznetOh yes, there are two flaky things to contend with here: the Corsair Force 3 120GB has had recall. I also have found the older 120GB didn't work properly on some motherboards and with older BIOS and Intel drivers.
Questions:
This is hopefully not an electronic EDU/MSDN ISO of Windows that you burned wtih Apple Disk Utility?
primary Windows - forget Boot Camp Assistant - just boot from OS X DVD and change the SSD to Windows MBR partition table and FAT and then format in Windows. Me, I would have bought Windows 7 SP1 64-bit System Builder.
From a hardware review reposted to Amazon:
The Corsair Force Series 3 SSDs were announced just a few weeks ago - boasting SandForce SF-2281 controllers and a very aggressive price point. Just days after the first units started shipping, Corsair has issued a recall of the 120GB Force Series 3 SSDs. According to Corsair, the 120GB model is seeing, "a significant percentage of these drive do not operate to specification." What the failure is exactly isn't clear, Corsair is quick to deflect blame from their partners, simply stating that both hardware and firmware need to be fixed.
Buyers of the Force Series 3 SSD in the 120GB capacity can return the drive to Corsair for exchange - retailers are also accepting returns. The 60GB and 240GB models are not affected. For more information on how to exchange a defective drive, visit this thread [...] in the Corsair support forums.
I'm surprised anyone is selling the Force 3 120GB (though it is on Newegg it is not on Amazon since it was pulled)
Apple has had a slew of problems with the new SATA 6G and 2011s.
http://macperformanceguide.com/blog/2011/20110607_2_MBP-ssd-howto.html
http://blog.macsales.com/page/2
the internal SATA port on the 2011 MacBook Pro is 6 gigabit. One reader installed a Crucial C300 and got 362MB/s average read speed for large sequential transfers. We're looking forward to testing the Intel 6Gb/s 510 SSD and OCZ 6Gb/s Vertex 3 which should be even faster.
http://www.barefeats.com/mbpp33.html
some other articles -
Apple Slipstreaming Dual 6GB SATA III Ports into 13/15/17" MacBook Pro — But Don’t Assume it Functions
Apple two SATA III cables 2011 MacBook Pro
04/05/11 - Apple finally working on a fix for the SATA III bug on the 2011 MacBook Pro
29/04/11 - Bug between some Vertex 3 and MacBook Pro. -
Hello. I got little problem today with bootcamp.
Few days ago I updated yousemite and bootcamp worked fine after that. Today I used yosemite and remember my partion in bootcamp is getting small and I wanted to give more space for windows. Sure I wasn`t able to just drag more space for bootcamp so I thought it could be ok to do new partion in machintosh disk in windows format as well and I made 3rd disk there as planning to be able to use that disk in windows. After that I continued my suff with os x and later tried to start windows via boot camp as I always do. Mac started reboot and suddenly black screen came and top left there was blinking line ( - ) and nothing happened after 10min.
So I just shut down my mac by pressing the on/off button and started it as os x after that. Went to disk ultility and removed that extra partion what I did earlier and tried to start windows again and same thing happened. When I`m booting my mac and pressing alt while that I`m not able to choose boot camp. I can just choose os x or recovery 10...
I also ran os x repair stuff and tried again but didn`t work. In general I think everything should be like before I did any new partion. But simply cannot choose bootcamp but I`m able to see bootcamp in disk ultility and I can choose restart mac using boot camp when using os x.
Sure I don`t have any back ups, so it`s kind a ankward. Hope I can start use windows/bootcamp without reinstall it.
So in the nutshell when I trying to boot windows when using os x I can choose start as a windows using bootcamp and after that it starts booting. After that black screen appear and I can see only white line in top left in the screen. Nothing really going to happen after that.
And when I`m booting and pressing alt I`m not able to choose bootcamp, just os x or recovery.here.
ville:~ villehietalahti$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 425910456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 426320096 - 1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 427589632 - 60807168] Win95 FAT32L
ville:~ villehietalahti$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 7c 19 |........?.....|.|
00000020 00 00 00 00 80 00 80 00 ff d7 9f 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e4 f1 41 28 34 42 28 f8 |..........A(4B(.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200 -
Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.
Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.
Maybe you are looking for
-
Display Resolution always resets after reboot
Every time I reboot, my monitor resolution in the system preferences is reset to 640x480. This is starting to become EXTREMELY annoying. This has only started happening since my upgrade to 10.4.4 and has continued thru 10.4.5 . Does anyone know why t
-
Java code to perform the erosion operation on the image
hi friends I want to perform the morphological erosion operation on an image can u help me how to write code for this operation? waiting for your reply....
-
Is there a seeded HR Hierarchy change event
I am building outbound SOA interface using BES, install is EBS 12.1.1 Is there a seeded event that fire when items are moved in HR Hierarchy? I tested with the following events subscribed: oracle.apps.per.api.organization.create_hr_organization oracl
-
How to find out pls plb for packages?
hi, where to find standard pls and plb for the packages:- thanks
-
Building my first CS6 Fluid grid in DW and why am I having problems saving as template?
When I save my page as a template and then add a new page based on the template my css files do not automatically attached plus the Title of the page is locked. Has anyone else had this same problem? Any ideas?