Windows 8 Bootcamp Low Brightness Issue?

Hi There
I have had my MacBook for 6 months now. Due to a new course I have taken up, I decided to partition my hard drive using the preinstalled bootcamp application. I used windows 7 home premium that I purchased, everything was fine with it after some tinkering and downloading the software unitility files from my Mac OS X and placing the files in Windows 7 and etc. I then upgraded to windows 8 Pro and since I have done this (it installed perfectly and runs beautifully) my brightness has automatically decreased. When I increase the screen brightness to full it is only half as bright as it was when running Mac OS X or Windows 7. When I turn the brightness down the screen display dims completely a little under half way down the brightness statues bar.
I have tried:
- Adjusting the adnvanced brightness settings on Windows 8 as instructed on WiseGeek or some what website (I believe this did not work as it was a guide for an automatic self adjusting brightness glitch)
- Adjusting a certain brightness level file in the registry editor in Windows 8 that was to do with Nvidia- but the file that they told me to look for I could not locate (maybe this is the issue; I lack this file?)
Any help would be much appreciated; please do not hesitate to ask for any extra information.
Many thanks
creyesweeney

This may do the trick:
http://www.howtogeek.com/107173/

Similar Messages

  • W530 windows 10 + nvidia brightness issues on battery

    System: w530 with discrete nvidia set in biosOS: Windows 10 clean installProblem: Whenever the power cord is unplugged, the display dims and/or color characteristics change, which is most visible on white backgrounds such as switching between browser tabs. There were similar problems in windows 7 too, but the lenovo power manager had some settings which used to work for me. There is no (lenovo) power manager for windows 10. I have disabled all adaptive/auto/battery saving features in power management, and yet this happens. My settings for battery are same as they are for A/C. I'm using the maximum performance profile. Most results point to Intel's power saving settings. However, I am using an nvidia card only, and they don't apply. 

    Yes, the only driver active is nvidia's. Like I said, there were similar problems on windows 7 too, but from what i remember, one of the profiles/settings in lenovo's power manager used to work for me. On win 10, I have exhausted all the options for disabling any sort of battery saving features and it still happens. I'm also using whatever software is available for win10 from lenovo's website, but that didn't really make any difference. The easiest way to reproduce it is to be on the desktop screen and unplug the cord. You would see the screen dim.  Edit: Found some mention of the exact same problem on reddit. https://www.reddit.com/r/Windows10/comments/35f9k8/screen_brightness_keeps_changing/ Edit2: Another detailed account of the problem: http://rog.asus.com/forum/showthread.php?43315-Auto-contrast-is-driving-me-nuts!! It looks like an nvidia driver bug. Can lenovo acknowledge/patch the issue ? Ironically, for once, linux is working better for me than windows on this system. 

  • What driver to install to fix Brightness issues on my Edge 15 with Windows 8.1

    Hi,
    On my Edge 15 with Windows 8.1, Brightness is unavailable from Windows. I can adjust brightness with the Fn keys, but it keeps resetting it's default value. Very annoying.
    There are a lot of drivers, which one should I install to fix this problem?
    Thanks,
    Heras

    Hi Heras2,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing the issue with Brightness on your ThinkPad Edge 15.
    To resolve the issue please update Display drivers, Hotkey features & power management application.
    Note: before updating the above application you have to uninstall it first from Control panel –Program & feature option and after that you have to update.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Apple Cinema Display 23" brightness issue while using with Microsoft Vista

    Hello there,
    I have the following issue and was wondering if someone has an idea what the reason is or what can I do to fix this:
    I have a 23" Apple Cinema Display running with a MacPro 2,8 GHz. When I switch to PC using BootCamp 2.1 with Windows Vista Service Pack 1 32bit the screen becomes extremely dark.
    At first, on the PC side, the display has the correct brightness but after two seconds it switches to a very low brightness setting.
    When I go back to the Mac side the brightness setting on my Cinema Display has changed to the lowest point.
    I also have a MacBookPro, with Microsoft XP installed also using BootCamp (I cannot find the version of this Boot Camp, but it is an earlier version) to change to PC. In XP, there is a driver installed that allows me to use a slider on the PC to control the monitor brightness. But with Vista this slider is nonexistent.
    I already tried changing the graphic's card NVIDIA 8800 driver to see if I can manipulate the brightness on the monitor. I realized there is brigthness slider on the Nvidia driver, but when you make brighter, the colors just get messed up, and the brightness stays as dark as before.
    We have lately upgraded to Snow Leopard and had installed Spyder on the Mac side to create a monitor profile for the Cinema Display. I already deleted the profile to see if there is a change. Nothing. I already went back in time on my PC (Restore Point), also nothing.
    Could I download a driver for Vista, so that I have a brightness slider on the PC side, so that I can adequately change the brightness to its correct setting.
    It is amazing how the lack of correct brightness in a monitor, can ruin your entire working day! Very frustrating!
    It would be greatly appreciated if someone has a solution for this issue! Thanks a lot!
    Emil

    Okay, I came across a thread that implies there is a problem with using the Apple ADC-to-DVI adapter to attach the older "acrylic" 23" Cinema Display to a Mac Pro DVI graphics card. Basically, the workaround is to NOT use the USB part of the adapter (disconnect it).
    1) In OS X, set the desired display brightness.
    2) Disconnect the USB cable coming from the converter to the Mac.
    3) Restart into Windows.
    The brightness setting should now remain as it was under OS X.
    Confirmed to work on my Mac Pro v1,1 (dual 2.66 Core 2 Duo) with nVidia GeForce 7300 GT video card running Windows 7 x64.
    Link here: <http://forums.macrumors.com/showthread.php?t=790910> for credit to resolution.
    Of course, you lose the functionality of the 2-port built-in USB hub in the Cinema Display, but an external USB hub can make up for that.

  • IMac, low brightness, sound buzz

    Hi, i'm italian mac user, and i bought my imac ( 27" i7 1 Tb HDD 4 Gb Ram) last week, and other user tell me to try to make low brightness in my mac and effectively if i make the brightness to low i feel buzz on foundation. The problems is only low brightness, it's normal ?
    It's a hardware or software problem ?
    There are other user that have this problem ?
    Thanks for disponible

    Hi swolpe.
    I can confirm this on my late iMac 27" i7.
    The buzzing is actually the fan from what I can venture to guess. The buzzing is on the top left near the edge of the vent and is present when the CPU load is rather high for extended periods.
    As others are describing, the noise is less noticeable when the screen is at full brightness vs being at the dimmest setting. If it is a fan issue, then perhaps at full brightness there is a voltage drop to the fan; which would indicate that the power supply may just be adequate.
    Regardless, it is most annoying - and this is after it had replaced a new 17" unibody macbook pro (core2duo 3Ghz) which destroyed three replacement power supplies. Under heavy load in the macbook pro laptop would actually drain the battery while it had AC power. The "dead" power supply bricks would only push out ~48watts compared when brand-new when it would push out 70-80watts.
    Product looks good but doesn't deliver quality .... really disappointed.
    With the iMac 27" - other issues are:
    The latest Bootcamp (3.1) update which had alleged Windows 7 support forced the ATI graphics driver to render in 16bit mode (did a driver rollback to revert to 32bit color).
    The screen never goes in power saving mode within Windows ... never.
    My MightyMouse has already burnt through 6 AA batteries in 2 months.

  • Low Contrast Issue

    Folks,
    I currently own a Canon T2i DSLR, and just purchased a Powershot SX280.  I noticed in two of my recent outdoor pictures with the new Powershot SX280, I got low contrast shots in auto mode.   Basically, the pictures have a hazy, grey look to them.  On one of my shots, I re-took it 3 times (pool area shot), and still the low contrast, since it was obvious on the image display on the camera.  The 2nd shot, I didn't notice it, till I downloaded on my computer.  In both cases, I had no intention of shooting a low contrast picture.  One of pictures (pool shot) was sent to the virtual trash can, since I re-took it with the T2i without the low contrast issue, the other picture (ping pong) I repaired in Adobe photoshot by adjusting the contrast.  This was very mysterious to me, since I've only experienced this with my T2i, when I get some bright sunlight coming into the lens.  
    In both shots with the Powershot SX280, I didn't spend any time to see what "mode" it detected for the shot, and just took a quick point and shoot to capture the moment.  Anyone have any idea what might have happenned.  Here is a description of the photos:
    1. Two children in the pool with a light color deck with plenty of sunlight reflecting off of the deck and water.  Some water movement in background.
    2. Two children playing ping pong in a shaded porch area with a window behind them that had little sunlight reflection on it.
    In both cases the children are in focus, so I've got the focus correct, but I think somehow some other factors threw off the camera and led to the low contrast.  The ping pong shot would probably have been better suited by speeding up the shutter speed to catch the ball without a blurr, but the shutter speed was fast enough that the kids were not blurry even with their hand/body movement.
    Any hints?
    Greg

    If you could post up pics, that can help with a diagnosis.

  • Is it possible to get ReadWrite Mac HFS+ drivers for windows 7 so I can manage my Mac formatted Backups through windows bootcamp?

    Hello!
    I was just curious if there was a driver or something I can install so that I can read and write my mac OSX formatted [HFS+] external drives in Windows 7,
    using the windows file explorer [the equivalent for finder].
    This is essential for me because I need the windows explorer copy/file transfer dialog box with all it's options and functionality.
    Any suggestions relating either to windows bootcamp, or running windows through vmware fusion next to mountain lion [I would much prefer to be able to do this with VMWare Fusion, but either way is absolutely fine.]
    I need this because I need to do HEAPS of file management,  
    and I find finder's file transfer / copy dialog box to be totally inadequate, hopeless and almost useless, [a nightmare in fact] next to the excellent functionality of Windows 7 file transfer dialog.
    This has been my most hated issue with OSX for years now.
    File management is a total nightmare in OSX.
    I may make another post / feature request detailing my hatred of this lack of functionality, because it kills me every time I have to manage and backup large folders filled with lots of files and subfolders.
    Sorry for the end-rant.
    Thanks so much for any help! (:

    Hello Alberto and Woodmeister50,
    thank you for both your answers.
    I have to try and remember to state things I have tried previously or am aware of; my bad!
    Alberto:
    Thanks for your ideas.
    I'm aware of ex-fat format.
    Unfortunately, my external drives are quite full and a reformat or EXFAT partition is out of the question.
    I'm formatted them OSX extended journaled a couple of years back before I was aware of exfat.
    I could buy yet another drive, but I don't really want to do that until SSD's come down in price and expand in size.
    [also, while not a big issue, I hear EXFAT can't handle files bigger than 4gb. Not that I have many such files, so that's not really a big concern].
    So doing my file organization through windows explorer is, to my knowledge, the best option,
    if it is possible. [I hope!]
    This would be a perfectly satisfactory solution for me if I can use Windows Explorer through VMware to manage and organize the files and folder on my HFS+ external drives.
    I'm not sure if paragon HFS+ or Macdrive allow you to use windows explorer to manage files?
    Or only through their own file manager and dialogs?
    A costly gamble if they do not, and if their file/folder transfer dialog also happens to be inadequate.
    Woodmeister :
    Thanks.
    Actually, my problem is both HFS+ / windows compatibility AND that I hate finder
    [the HFS problem being a result of the fact I hate finder]
    I have tried Pathfinder [the demo version though, maybe it has limited functionality],
    and I have found it's file transfer dialog / options / functionality to be very totally lacking as well.
    Others I have tried.
    Mac Explorer.
    MoveAddict doesn't seem to work for me presently, although I hear it might be good.
    Total finder is fantastic for other reasons but does nothing for the copy dialog.
    Um.... there were a bunch of others I tried, but all no good.
    So I guess my question is still the same, with a bit more specific information now
    For a very in-depth review/analysis of the hatred of finder's lack of features in this area,
    there are many threads on many forums, such as can be found if you google for the thread on this forum
    GOOGLE : MacRumors OS X: how to merge folder contents, not replace
    Please ignore the fact that some ex-windows people are just not used to the fact that "replace" in finder means to replace a whole folder, as this is not the issue.
    The lack of functionality is, and there are many pages of mac-loving people complaining about it.

  • Screen flicker at low brightness

    Hi all
    I have a macbook pro unibody 15" and I seem to be getting a screen flicker at low brightness settings.
    I used to have a macbook and it never did this.
    Is this normal and if not, is there anything that I can do about it?
    Message was edited by: Gambit Hunt

    Hi G,
    I was going to suggest having it checked for the NVIDIA issue, but you state you have a unibody. If you have a new unibody, you would be best served if you posted in that forum (this area is for the Original MBP). Good luck.

  • Low performance issue with EPM Add-in SP16 using Office Excel 2010

    We are having low performance issues using the EPM Excel Add-in SP16 with Excel 2010 and Windows 7
    The same reports using Excel 2007 (Windows 7 or XP) run OK
    Anyone with the same issue?
    Thanks

    Solved. It's a known issue. The solution, as provided by SAP Support is:
    Dear Customer,
    This problem may relate to a known issue, which happens on EPM Add-in
    with Excel 2010 when zoom is NOT 100%.
    to verify this, could please please try to set the zoom to 100% for
    your EPM report in question. and observe if refreshing performance is
    recovered?.
    Quite annoying, isn't it?

  • HP Beats Special Edition 15-p030nr Notebook PC (ENERGY STAR) screen brightness issue

    I'm haing a screen brightness issue on my HP Beats Special Edition 15-p030nr Notebook PC (ENERGY STAR). I upgraded from 8.1 and the F2/F3 keys to dim or brighten screen do not function. Any suggestions besides reverting back to 8.1.? Not sure if I had the screen dimmed all the way or brightened all the way when it was upgrading, or if it even mattered.  

    Hi @Twright2014
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see your having some sound issues with your new notebook. I will be happy to help you with this. How does the audio sound when you use a set of headphones? Try the troubleshooting steps in this HP document No Sound from Speakers which includes using the built-in Windows troubleshooter.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Repairing bootcamp core storage issue

    I am having an issue with my iMac.  It is a late 2013 model with a 3 TB fusion drive.  While trying to remove and start over on a windows bootcamp partition, there was a crash on the windows side and now I can not remove the partitions or run bootcamp.
    I have tried running all the terminal commands in all the different threads I could find.

    This looks like it might be heading in the right direction.  It now says it is a bootcamp partition.  Bootcamp instead of crashing now says it is a partition that was made in another tool and can not work with it.  Still the same errors when I try to run the list of commands you gave.
    Last login: Tue Oct 28 20:52:12 on console
    Jamess-iMac:~ jamesrobertson$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         1.7 TB     disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:          Apple_CoreStorage                         517.9 GB   disk0s4
       5:                 Apple_Boot Boot OS X               134.2 MB   disk0s5
       6:          Apple_CoreStorage                         801.4 GB   disk0s6
       7:                 Apple_Boot Boot OS X               134.2 MB   disk0s7
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS BOOTCAMP               *517.5 GB   disk1
                                     Logical Volume on disk0s4
                                     D5472200-7459-4A63-9C1A-31782B061B8A
                                     Unencrypted
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *2.5 TB     disk2
                                     Logical Volume on disk0s2, disk0s6
                                     8889BBFD-9D4D-4863-AA26-581BCE19A6BC
                                     Unencrypted
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *3.0 TB     disk3
       1:                        EFI EFI                     314.6 MB   disk3s1
       2:                  Apple_HFS My Book                 3.0 TB     disk3s2
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *15.9 GB    disk4
       1:                 DOS_FAT_32 WININSTALL              15.9 GB    disk4s1
    Jamess-iMac:~ jamesrobertson$ diskutil cs list
    CoreStorage logical volume groups (2 found)
    |
    +-- Logical Volume Group 76834525-0EEA-4DCB-82E2-37B79D6FDCF2
    |   =========================================================
    |   Name:         04
    |   Status:       Online
    |   Size:         517865467904 B (517.9 GB)
    |   Free Space:   3137536 B (3.1 MB)
    |   |
    |   +-< Physical Volume 9BF97AD2-1540-4424-94EA-92F99DCCBEF9
    |   |   ----------------------------------------------------
    |   |   Index:    0
    |   |   Disk:     disk0s4
    |   |   Status:   Online
    |   |   Size:     517865467904 B (517.9 GB)
    |   |
    |   +-> Logical Volume Family 48C77F7E-9923-421F-A154-229AC852BF1F
    |       ----------------------------------------------------------
    |       Encryption Status:       Unlocked
    |       Encryption Type:         None
    |       Conversion Status:       NoConversion
    |       Conversion Direction:    -none-
    |       Has Encrypted Extents:   No
    |       Fully Secure:            No
    |       Passphrase Required:     No
    |       |
    |       +-> Logical Volume D5472200-7459-4A63-9C1A-31782B061B8A
    |           ---------------------------------------------------
    |           Disk:                  disk1
    |           Status:                Online
    |           Size (Total):          517510004736 B (517.5 GB)
    |           Conversion Progress:   -none-
    |           Revertible:            No
    |           LV Name:               BOOTCAMP
    |           Volume Name:           BOOTCAMP
    |           Content Hint:          Apple_HFS
    |
    +-- Logical Volume Group F7493DDD-725F-4A2A-A5BD-782C14AAAC76
        =========================================================
        Name:         Macintosh HD
        Status:       Online
        Size:         2481599021056 B (2.5 TB)
        Free Space:   0 B (0 B)
        |
        +-< Physical Volume CD029AC3-A4CA-4E27-B8B9-E80A3E4D40B3
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     1680162480128 B (1.7 TB)
        |
        +-< Physical Volume 2D2B9426-8862-4597-A54F-12981D2095D2
        |   ----------------------------------------------------
        |   Index:    1
        |   Disk:     disk0s6
        |   Status:   Online
        |   Size:     801436540928 B (801.4 GB)
        |
        +-> Logical Volume Family 65027EE9-CB03-41CF-A2B7-FF2E7E9ED7A0
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 8889BBFD-9D4D-4863-AA26-581BCE19A6BC
                Disk:                  disk2
                Status:                Online
                Size (Total):          2480978251776 B (2.5 TB)
                Conversion Progress:   -none-
                Revertible:            No
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    Jamess-iMac:~ jamesrobertson$ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=3000592982016; sectorsize=512; blocks=5860533168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Malformed MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 5860533167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  3281567344      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      3281976984     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      3283246520         584        
      3283247104  1011455992      4  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      4294703096      262144      5  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      4294965240  1565305744      6  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      5860270984      262144      7  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      5860533128           7        
      5860533135          32         Sec GPT table
      5860533167           1         Sec GPT header
    Jamess-iMac:~ jamesrobertson$ sudo gpt -vv -r show /dev/disk1
    gpt show: unable to open device '/dev/disk1': Resource busy
    Jamess-iMac:~ jamesrobertson$ sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 97451/255/63 [1565565872 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 - 4294967294] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    *4: 07    0   0   0 -    0   0   0 [         0 -          0] HPFS/QNX/AUX
    Jamess-iMac:~ jamesrobertson$ sudo fdisk /dev/disk1
    fdisk: /dev/disk1: Resource busy
    Thanks
    Jimmy

  • Does all imac screen flickers at low brightness?

    Hi, I just got the 21.5" imac.
    I notice there's this minor flickering problem at low brightness, is this normal?
    It seems like it's a known issue after I researched about it.
    Is it a hardware problem or a software problem?
    Should I exchange it?
    Thanks for the help!

    Welcome to Apple Discussions,
    No that isn't normal, call AppleCare in the morning the number is in your owners manual.
    Regards,
    Roger

  • How do I share Mac music and photo files when in Windows Bootcamp mode?

    I have a new iMac with a terabyte of storage that includes about 30 gigs each of iTunes music and jpg photos. I need to share them to the Windows Bootcamp environment so I can wirelessly stream to them to a DLink DSM 320 media server connected to an AV system located in another room. When in Bootcamp Windows the the 320 can "see" the Windows machine but cannot find any media.
    So the question is, how do I share files between Mac and Windows when in Windows Bootcamp?
    A better solution would be to directly connect the Dlink when in the Mac environment but I have not been able to find software to do that (the Dlink product is for PC only.) If anyone knows of such software that would be great too.

    Windows needs third party software to see files on the MAC OS extended FS. I've heard MacDrive does this.

  • Blackberry needs to sort out he brightness issue on the Q10 - Its very bad

    Blackberry needs to release an update for its Q10 device ASAP.  The device has brightness issues since it was launched. In a response to a Forum member's complaint about the screen dimness, a support staff here said that's how the device is made with no auto-brightness toggle to conserve battery. I believe customers should be given the options to turn on or off this option as they wish. Please fix this problem BB

    No he doesnt have a screen problem Jason. It is the Q10 that has a screen problem. Stop misleading people here. Blackberry needs to come up with a fix. The fact that they are not even responding to peoples' concerns on the Forum shows why they will continue to suffer pooor sales. 
    I am extremely disapointed at Blackberry!! 

  • Creative Cloud on Mac OSX and Windows Bootcamp on the same machine.

    Hello,
    I am looking into getting 3DStudio Max which is a Windows only program but will need to flip flop between 3DSM and Photoshop.  I am wondering, can I install my Adobe apps on both Operating Systems so that I can have them on my regular Mac OSX for normal work and in Windows Bootcamp for when I do 3D renderings?  I rather not use a Virtual Machine considering both of those programs are going to take a lot of RAM already.  Adding another program to that mix I feel will just overheat/slow down my machine.
    Thank you for your thoughts and time,
    Sarah

    that's interesting.  it may be a problem, but give it a try.
    just open your bootcamp windows, navigate to https://creative.adobe.com/ and start downloading ps.  a cc desktop app will download to your bootcamp windows and hopefully you ps will work on your bootcamp windows.  i don't see any reason why it would stop working your mac, but that will count as your two installations so you will not be able to install on another computer.

Maybe you are looking for

  • Creation of Material's PLANT Configuration

    Hi Gurus! i'm trying to find a way to CREATE MATERIAL CONFIGURATION for PLANT level (MARC-STDPD field + configuration) i found MATERIAL_SAVE_CONFIGURATION and i can use it to UPDATE an existing configuration, but i cannot find how to CREATE a new one

  • Windows 8.1 will not copy files from intranet site.

    I am using Windows 8.1 and I am trying to copy files from an Apple Time Capsule disk to a local hard drive. First I got the message box that said "Your Internet security settings suggest that one or more files may be harmful. Do you want to use it an

  • Digital signature on xml string

    Hello I'm trying to sign an xml string, but when I do so, I receive: HIERARCHY_REQUEST_ERR: An attempt was made to insert a node where it is not permitted.      at com.sun.org.apache.xerces.internal.dom.CoreDocumentImpl.insertBefore(Unknown Source)  

  • On button twice??? Powering ON delayed...

    I have noticed that when my MBP is off, I have to hit the on button twice...the first time never does anything - the 2nd time it turns on w/ no problem. I am positive I am hitting it all the way b/c I have recently become overly aware of the problem.

  • Project file wont open

    Help. I cant open my Premiere Pro project files. After renaming some of the source files now Premiere says 'file format not supported'  when I try to open.  The same computer and program generated these files. I know I have to relink the media but an