Windows 8 bypasses "Press Escape Key"

I have an HP Envy 14.
Windows prompted me that it needed to do some self repair, which has happened before. I ran into a problem this time. Now the PC bypasses the Press Escape Key prompt and goes straight to Windows startup.
It happens after a Power Off/Power On and a Restart. On the first method, I have done an immediate Power On and and also left the laptop off for two days, and stil have the problem. Pressing Escape once or repeatedly as the PC boots up hasn't helped either.
Thanks for any thoughts.

Hi blumstoo,
Welcome to the HP Forums! I see that you want to do a start up repair with Windows 8. The thing with Windows 8 it is harder to access any pre-boot menus. The easiest way is to do go to your Advanced startup optioons. This link will show you how to do that.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

How to Unload the form when the user presses Escape Key

Hi all
I have tried several triggers for unloading the form when the user presses escape key,but none of them worked. Could any body give the trigger name and the code that unloads or closes the form when the user presses escape key.

Hello,
Change the EXIT entry of you ressource file:
27 : 0 : "F4" : 32 : "Exit"Francois

AppleScript to press Escape key (3x) for Excel

Hi all,
I'm trying to automatically convert Excel files to PDFs using Automator. Although, every time the Excel file is opened, I get a message about links to other workbooks. I really don't care about these links and just want to convert the file to a PDF. I just can't get Automator to press the "Ignore links" button on the Excel message.
Now I've found out that pressing the escape key on my keyboard activates the following buttons on the Excel message about the links:
- "Update links" (then there's a Finder window popping up)
- "Cancel" (the search for other workbooks) (another Finder window pops up)
- "Cancel" again
Then Excel opens up the file I need to convert, so I can actually convert it using Automator and do whatever I want with it.
I have absolutely no experience using AppleScript.Is there a way to make a AppleScript that presses the escape key three times, so that Excel just opens my file?
Thanks in advance

Pressing the Escape key is trivial:
tell application "System Events"
repeat three times
key code 53
end repeat
end tell
Invoking this script at the right time is what's harder (plus, you might need a small delay between each keystroke to allow for the OS to handle the keystroke and display the next dialog, otherwise the second and third keystrokes might get lost.

Press Escape Key - PHAP_CREATE

Hi Experts,
Trust all is well with you all; I need your expert advice...
During creating an Appraisal using t-code 'PHAP_CREATE' upon pressing both cancel and escape system is not give option for enduser to save the job prior to exiting document...
Like: Do you want to save your changes first?
Any Idea how to enable?
Best Regards,
Aslam

dear
kindly go through the following docs
http://www.trainingbundle.com/iSMARTS/HCM/Performance%20Manager.doc

Using escape key in finder to navigate backwards

wondering why this function was removed. in mountain lion i could navigate backwards in a finder window by hitting the "escape" key. each press of the button would take me backwards through my finder path the same way that i came into whatever folder i was in. like a bread trail through the woods, it was really nice.
any way to reactivate in mavericks? why would you take away something so simple and functional?

Why always the best options are removed in the latest version, It happens with Adobe always, now Apple joined it seems.
Pressing Escape let me out from selected folder in Finder window, it helps me move around top and bottom folder with help of arrow keys.
Now, it's uneasy to come out of the folder without mouse.
Whats a breakthrough here, any command which activate this function back?

My Escape key is not working

Hi,
I am Meena.
I am doing a project using NetBeans and MS-Access.
When I run my project a internal framed named login loaded on the jdesktoppane which in JFrame.
So in the login internal frame i used two buttons one for Sign-in and another for sign out.
So I combined the Sign-in button with Enter key and Sign-out button with Escape key by the following coding.
I wrote the following coding in LoginInternalFrame->properties->enabled->advanced->Generate PreIntialization Code.
Action EscFromLogin=new AbstractAction()
public void actionPerformed(ActionEvent e)
    jButton2.doClick();
Action OkFromLogin=new AbstractAction()
    public void actionPerformed(ActionEvent e)
       jButton1.doClick();
getRootPane().getInputMap(jButton2.WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE,0,false),"Esc_in_Login");
getRootPane().getActionMap().put("Esc_in_Login",EscFromLogin);
getRootPane().getInputMap(jButton1.WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER,0,false),"Ok_in_Login");
getRootPane().getActionMap().put("Ok_in_Login",OkFromLogin);In the above coding Enter key works well no problem.that is when I press the Enter key ,it combined with Sign-in button and works well.
But when I press Escape key,it doesnot combined with Sign-off button.
that is nothing is happening when I press Esc key.
So i change the Escape key and test with F1 then F2 then F3 all are combined with Sign-off button and works well.But only the escape key is not working.
But I have so many internal frames .In all internalframes my esc key works well.But not in the first inter frame(login internalframe)
I couldnot understand the reason.
Will you please help me to solve.
Thank you so much.
Meena

mmm, i'm doing some tests and the case is working for me... The reason F1,F2 keys works while ESC don't is that some component is "eating" the ESC key. Probably your password textField, but it is not its default behaviour. For example, try to replace the textField with a FormattedTextField, write something into it and press ESC, this first ESC is consumed by the FormattedTextField, if you press ESC a second time the FormattedTextField not consume it, so the ESC keystroke processing is given to the rest of the componentes until one of they consume it (basically). So, how can you solve th problem? Try to determine which component is the "escape-eater". Once you detected it try to determine which properties are set and if this properties can alter the keyboard mapping. The problem can be difficult to repeat for us because the look and feel, java version, etc. can affect the system behaviour too. A global hook to ESC can also be the reason (maybe esc key it's not reaching ths components), try to override ProcessKeyBindings and log the results....

Escape Key ruins my application

Escape Key messed up big time with my app. To name the
problems, there were three major bugs possible to occur when I
repeatedly hit the ESCAPE key when my app is running (of course on
Projector) :
1. Some animations (sprite) drew back to frame 1.
2. Sometimes in some part of my app, it failed my projector
to call certain Custom Functions. And in some other cases, it
somehow disabled (or maybe removed) certain Sprite Behaviors. Thus,
making that game not playable when it happened.
3. It also made some error such as :
Handler not found in Object. #play
I knew it's gotta be something to do with my Flash Sprite,
but to surprise me, I found out that no keydown script should be
running when that error occured.
In my conclusion, these things related to my pressing ESCAPE
key repeatedly when playing the app.
Is there anyone else who has experienced the same problem
with me? Is there a solution this? Maybe I can lock the Escape key.
But, hey, I need the Escape key to let user Skip certain parts of
my game.

quote:
Originally posted by:
wherold
look in your documentation under "exitlock".
No, wherold. It was not exitLock. I already set it to False.
Now I know that the sprite that drew back to frame 1 was my
fault. But, how the Escape key messing up with Custom Functions
still amaze me. I managed to find a solution: using baDisableKeys
at certain events in the game. -_-
:) Wolfgang

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau

Can't install Windows "No bootable device -- insert boot disk and press any key"

I'm running OSX 10.9.3 on my Macbook Pro 13-inch, Early 2011 and trying to install Windows 7 via Boot Camp Assistant and I'm using a flash drive loaded with bootable copy of Windows 7 Ultimate (legal, if that makes any difference).
Here's what I've been doing:
1. Plug in my flash drive, then on Boot Camp Assistant, click "Install Windows 7 or later version"
2. Set my Windows partition to 45GB and continue... so far so good...
Then the problem:
3. My computer restarts, goes to a black screen with the message "No bootable device -- insert boot disk and press any key"
The flash drive is still plugged in but is it not being recognized or something? Nothing happens when I press any keys.
I can use OSX just fine by holding down "Alt/Option" on restart, but in my case what can I do to continue further with the Windows install? It's basically an empty partition as of now. Any help appreciated!

Ive been having this problem and have been trying to figure out how to fix it for almost a week now. I have a 2011 17" MBP with the superdrive removed. Ive tried many different methods and many different methods to no avail. If anyone can help, please do!
xxzy, have you tried the KUNU method?
you can find it here:
Bootcamp without Optical disc drive
Scroll down to Kunu's post about his solution and see if it works for you.

Windows install problems, "No bootable device. Insert boot disk and press any key" and general wrongness

Hi,
I've been having this issue with a Windows 7 install.
Firstly, I have successfully installed Windows 7 before. I partitioned my HDD, held down option when booting up, booted off a USB and after a few goes it all worked fine. I didn't use boot camp assistant to install. I then proceeded to remove Windows a little while later. To do this I used disk utility to erase the partition on my HDD and but afterwards discovered my imac would continue to try to boot off the now non existant Windows partition. I solved this problem by using boot camp assistant via the "Remove Windows 7 Install" option. My imac booted up exactly as I would like it to from then on.
I am now trying to reinstall windows. I tried the way that I did it the first time but after partitioning my HDD via disk utility, inserting my USB and rebooting with option held down I am only given the option of my main HDD and my recovery drive. I have tried burning the files on the USB to DVD and booting off the disk drive by holding down C while starting up. Neither the USB or DVD are visible to be selected when I hold down option during startup.
When I try to use boot camp assistant to install I get a "No bootable device. Insert boot disk and press any key" error after the step where it partitions your HDD you. Also, my option to create an install USB via boot camp assistant is greyed out and unavailable for clicking.
Help?

Fix your superdrive.

Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."

I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

Bootcamp will not load Windows installer - No bootable device, insert disk then press any key

Hello, I recently decided to install bootcamp onto my 2009 27" iMac, I have done this before for other people's computers and I thought it would be no different for my own. However, on attempt to install the Windows disk, instead of starting the installer it only gives me an error message saying No bootable device, insert boot disk then press any key. I have tried ejecting the disk and then putting it back into my disk driver but it still seems to give me the same error. I went back into my Mac using Alt(option) key on startup and then set the startup disk as the Windows installer disk but it doesn't seem to make a difference. I also tried booting the disk directly from the startup disk menu is the alt(option) key on startup but that didn't do anything different either.
Suggestions would be greatly appreciated!
Also if it helps my computer is a
2009 27" iMac running OSX 10.8.4
And my disk drive is an external drive because my internal SuperDrive went out.

That last point is your problem, Boot Camp doesn't really like booting from external drives.
You will have to do the following (assuming Boot Camp already partitioned your hard disk):
1. Use Disk Utility to make a CD/DVD Master of the Windows Install Disc.
2. Rename the resulting *.cdr file so it has an *.iso extension.
3. Insert a USB Flash Drive (8GB or more) into a USB port and start Boot Camp Assistant.
4. Make sure only "Create a Windows 7 or later version install disk" is checked.
5. Follow the directions, selecting the USB Flash Drive as the destination, and the *.iso as the source.
You should now be able to boot from and install Windows from the USB Flash Drive. It's annoying, but I had to do that.
You will need a second flash drive of 1GB or more, or 700MB or more extra space on the install disk to place the boot camp support files, which will need to be installed.

Trying to Install Windows 7 onto MBP Mid-2010 but I get this "No bootable device -- Insert boot disk and press any key". What do I do?

I'm trying to install Windows 7 onto my MacBook Pro Mid-2010 (MacBookPro6,2) from a USB drive, since my Super Drive no longer will burn DVDs or CDs. I did the XCODE trick to allow me to make the bootable USB. But when it reboots after partitioning I get this, "No bootable device -- Insert boot disk and press any key" message. When I press a key after reinserting the USB it still won't boot after pressing a key. I unplugged anything connected to it and it still doesn't work. Is there any way I can get it to be recongized or do I just need to get an external disc drive and burn a disc that way?

If your computer came with an inetrnal optical drive, you must use that to install Windows.

HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

What is the shortcut to maximize window (full screen) which is normally done by pressing " -- " like key on the right top corner in macbook pro ?

What is the shortcut to maximize window (full screen) which is normally done by pressing "<-->" like key on the right top corner in macbook pro ?

There's no <--> key on ANYones keyboard. (Great answer Shootist )
The other part of his answer is only applicable to certain windows (browsers specifically) as there is NO system wide maximize command in the manner you are asking.
Apple's "maximize" function (green +) simply maximizes the window to the content, not the screen.
For other keyboard shortcuts (and of course they may be outdated) try: this

Windows 8 bypasses "Press Escape Key"

Similar Messages

Maybe you are looking for