Windows 8 can either launch vm in hyper-v or connect to wifi networks, but not both. Needs a reboot to switch mode. Any idea?
Hello guys,
New here for a problem I think is quite weird. Got the MBA 2013 i7
When I boot Windows from OS X > Startup Disk > Boot Windows, I can launch a virtual machine in hyper-V, so that's cool, but I can't see an wifi networks available, so no internet.
If I reboot to Windows directly from Windows (bootcamp options), I connect without pain to any wifi but I cannot launch a vm in Hyper-V anymore (the Windows Phone 8 emulator to be precise). It says hardward virtualization is not enabled in BIOS.
Seems to me it loads either the wifi driver, either the VT-x. Any ideas?
People I have some good news!!! The problem is in BootCamp!!!!!!
I'm now able to run the Windows Phone emulator on a Windows 8.1 bootcamp!
This is what you have to do.... for everytime you want to use the emulator you must follow this steps:
- Shut computer completly off;
- turn it on and hold the Alt key to boot in MAC OS;
- go to settings, bootcamp and choose Windows, then click restart.
On this session you will be able to run the emulator with no problems!!!! if you turn off your computer and boot automatically to windows the error will appear again!
Hope I helped out some of you!!!
Similar Messages
-
My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet
Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam -
The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?
This issue can be caused by the McAfee SiteAdvisor extension.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Connected to wifi network but safari can't find any web pages
my wifi connection is shown as connected but when i go to safari it says i am not connected to the internet. itunes, you tube, maps, etc. don't work either. does anyone have any ideas? i've seen suggestions on here but none seem to work for me
emertone,
Have you tried using a static IP configuration on your iPad instead of DHCP?
Settings->General->Network->wifi-> (arrow beside the current active wifi connection)? If you see an IP address like 169.x.x.x you are having a problem with getting a DHCP lease.
First make sure that MAC address filters are not enabled on your router. If they are, disable them and see if DHCP then works. It should give you a 192.168.x.x IP address. You may need to reboot the iPad or the connection to trigger DHCP.
If it doesn't work, and you still see a 169.x.x.x IP address, select "Static" instead of "DHCP"
- set IP to for example 192.168.0.155 (last part can be 0-255 but choose somewhere in the middle to avoid collision with DHCP assigned addresses)
- subnet 255.255.255.0
- router 192.168.0.1
- dns 192.168.0.1
Depending on your router you may need to use 192.168.1 instead of 192.168.0 in the above addresses, but try 0 first -
Can connect to wireless network but not to internet
Ok, so I bought a new AEBS and have finally managed to get it set up with my cable modem, and with security on so that the light is green, and not amber... the only problem now is that although I can connect to the wireless network that i have created using the base station, I cannot connect to the internet through it using my MacBook.
I don't have problem connecting my iMac to the net wirelessly using the base unit so am confused.
Anyone got any ideas?It is described on Page 51 of "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).
-
Why can I see other peoples' WiFi networks but not my own?
This is a problem that started when an engineer came to replace our TV's set top box as well as our router a few weeks ago. I'll run through everything in quick bullet-point form...
-My flatmates are able to see and connect to our network with no issues at all on their XP laptops.
I, on the other hand, can not see or connect to our network at all. However, I am able to see other WiFi networks.
-Days of rebooting and replugging the router, my iMac and AirPort card prove fruitless.
-Throughout all this, the router is sat on top of the set top box, which is sat on top of the TV. I move the router down so its sat next to the TV and a plant. I'm able to see and connect to our network with no issues.
-Three weeks later, the problem has returned. I can't see our network but my flatmates aren't affected.
-Thinking it may just be poor reception in my room, I set up my Mac in the front room a couple of feet away from the router. I detect other networks, but still not my own.
-More unplugging and rebooting later, hallelujah, I can see and connect to our network. I take the Mac back to my room and try from there. No luck. The familiar XBoxLive8973498374, BT-HomeHub8934897, TalkTalk439847 (etc) and Sofia networks come up in my networks list as usual but not our own SpeedTouch459873439847 (etc).
We have a Thomson ST 585 router and I have an iMac G4 with the original AirPort card. Short of buying a new router, does anyone have any ideas as to why this is happening and how to fix it?This is what MacStumbler sees when my Mac is situated a couple of feet from the router in the front room:
http://farm4.static.flickr.com/3051/2308676274_00f5eba51c.jpg?v=0
Our network is the one labelled SpeedTouch. As you can see, my AirPort antenna seems to be working perfectly. However, the SpeedTouch connection (and only the Speedtouch connection) would be lost intermittently for several minutes at a time.
This is what MacStumbler sees when my Mac is in my room:
http://farm4.static.flickr.com/3184/2308733380_dcdc2faccd.jpg?v=0
The SpeedTouch signal strength is obviously not as strong but still reasonable. I don't seem to have any issues anymore; I can see, connect and stay connected to our network with no real problem - but I haven't changed any settings on the router. -
BB CURVE 8520 can connect to WiFi network but will not browse the internet
I am with ROGERS service provider. They have not been very helpful with my issue.
All they try and do is sell me a data plan.
They said call RIM.
I should be able to connect to a WiFi network and access the internet without paying any crooks to do so shouldn't I? Can someone tell me how I can do it?
My plan with Rogers: Unlimited texting (in/out), unlimited phone calls, unlimited long distance, e-mail and BB messenger. Thanks so much for your help!!Can't anybody help answer???? I guess I will have to call RIM for tech support via telephone....If I do get favorable resolution I will post the answer to my question.....
-
Can't connect to WiFi networks via tray icon, manually adding works fine
I've searched for about a day for anyone having a similar issue and have come up with nothing so far. I have an older HP laptop with Windows 7 32 bit that is having issues with connecting to WiFi networks. It will find all available wireless
networks just fine, and when I select mine, it comes up with the prompt to enter my password, however when I hit OK to connect, the prompt disappears and nothing happens or responds afterwards. A few things that I've tried in order to troubleshoot and
narrow down the problem:
-I've tried connecting to two different wireless networks; one with WPA2 encryption and one with no encryption, both have the same issue (obviously the non-encrypted wireless network doesn't prompt for a password, but once I hit connect all prompts disappear
and acts as if I did nothing).
-I've added the WPA2 encrypted network manually to my list of wireless networks, and once I do this it connects just fine. When removed, it disconnects and the issue happens again (this confirms that the wireless password I'm entering is correct and
that there are no issues with the wireless network itself, as well as other devices working flawlessly on the same wireless network).
-I've disabled all firewalls and antivirus through this whole process, did not make a difference.
-I've reset winsock which didn't make a difference.
-I've run a virus scan, no viruses on the laptop.
I've run out of ideas as to what would prevent being able to connect to a wireless network through the normal process of finding nearby access points, putting in your password, and having it work. I understand that I could simply leave the wireless
network added manually, but this is not an option for when the laptop is taken elsewhere as having to add whatever wireless network I'm near manually is not something that should have to be done.I would recommend to update the driver for you wireless nic as a first step. Also, if installed, get rid of third party utilities that 'manage' your wireless network(s)
Also check if you can
clear out the remembered connections i've encountered issues before when a network with same ssid but different connection settings was stored by windows.
MCP/MCSA/MCTS/MCITP -
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
-
We recently installed Window 8.1 and now our new music does not sync to our i-pod nano. Any ideas?
We have tried both a generation 5 Nano and new Nano.Hey Terrible Teddy,
Thanks for the question. I understand you are experiencing issues with the iTunes library on your PC. To begin, I see that you recently installed a new hard drive. Did you happen to copy over files from the previous hard drive? If not, I suspect that the iTunes library is no longer locally stored, and what you are seeing is your iTunes in the Cloud purchases.
Do the tracks have a download icon that looks like this?:
If so, you’ll want to download these purchases as they are not locally stored on your computer:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
After doing so, go ahead and attempt to sync your iPod once more.
Additional Information:
iTunes 11 for Windows: Symbols used in iTunes
http://support.apple.com/kb/PH12306
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M. -
Can connect to network but not internet. Please Help!!!!!!!!!
I have a Thinkpad T-60p and have encountered a serious problem; I am unable to connect to the internet. The Thinkpad will recognize and connect to wireless networks but when I go to actually open a webpage it does not open. I spent hours troubleshooting the problem to no avail. My other laptop connects to the internet fine, so I do not think it is an issue with my router or modem. I also went to my neighbors and I was unable to connect to the internet even though I could connect to his network; once again my second computer does not have a problem. I tried what I could in the Thinkvantage wireless software but I am not that familiar with it. When I use the test connection option it just reads, “unable to connect to internet” but I have a strong signal to my network. I then tried a wired connection directly to my cable modem and my neighbors; once again it showed that I have a connection, but still will not connect to the internet. I tried disabling my Firewall and Virus software and still could not connect. I have shutdown, unplugged and reset everything. I still receive the same results. I am not sure what has happened, I have not installed any new software or hardware recently. The computer has been working great up until this morning. I ran my virus software and a free online scan as well, nothing had been detected. I called tech support and they said it was a software issue to either pay $100 for help or post in the forum. The only other option I can think of is a complete systems restore, which I am trying to avoid. Anyone have any suggestions?
Please Help,
P.ConnectDon wrote:
Perhaps the domain names are not resolving properly. Instead of http://lenovo.com, try http://64.26.254.19, which is the numerical address for lenovo.com. If you see the Lenovo home page, it will point us in the right direction.
Don
I will try that when I get home from work, thank you for the advice. However,I did notice that when it attempts to connect it shows the IP Address in the IE window bottom left corner. In the past it would always read connecting to "website name" but since the problem started it shows the IP address instead of the actual name. -
Can Management Studio connect to a server that is on the same network but not on the same domain?
Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain? I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
whether I am embarking on an exercise in futility.Hello,
That's your issue!
Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
be rejected as your local computer user account is not the correct domain account.
You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
Edit:
I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
Sean Gallardy | Blog |
Twitter -
Can you check for data in one table or another but not both in one query?
I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID Name
123 John Doe
124 Jane Donaldson
125 Harold Douglas
MARKETER_ACCOUNT
Key AccountID Marketer StartDate EndDate
1001 123 10526 8/3/2008 9/27/2009
1017 123 10987 9/28/2009 12/31/4712 (high date ~ which means currently with this marketer)
1023 124 10541 12/03/2010 12/31/4712
ARCHIVE
Key AccountID Marketer StartDate EndDate
1015 124 10526 8/3/2008 12/02/2010
1033 125 10987 01/01/2011 01/31/2012
So my query needs to return the following:
123 John Doe 10526 8/3/2008 9/27/2009
124 Jane Donaldson 10541 12/03/2010 12/31/4712 (this is the later of the two records for this account between archive and marketer_account tables)
125 Harold Douglas 10987 01/01/2011 01/31/2012 (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
select AccountID
from
ACCOUNT A,
MARKETER_ACCOUNT M,
ARCHIVE R
where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
where M2.AccountID = A.AccountID),
(select max(R.EndDate) from Archive R2
where R2.AccountID = A.AccountID)
and upper(A.Name) like parameter || '%'
<can you do a NVL like this? probably not... I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
, max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
, row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
, a.name
, b.MktKey
, b.FromDt
, b.ToDate
from account a
join filtered_basedata b
on (a.id = b.AccountId)
ID NAME MKTKEY FROMDT TODATE
123 John Doe 10987 28.09.2009 31.12.4712
124 Jane Donaldson 10541 03.12.2010 31.12.4712
125 Harold Douglas 10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin -
In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
Cheers, Tom -
from last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but still i am fail ,pls do needful
I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...
Maybe you are looking for
-
DVI to video issues, please help!!!
When I plug my mac mini up to my tv, it loads fine, then when the desktop appears it goes black and white and starts rolling, and flickering. I've tried some different resolution settings and no go. Any advice??? Thanks,Jason
-
What is the best practice on mailbox database size in exchange 2013
Hi, does anybody have any links to good sites that gives some pros/cons when it comes to the mailbox database sizes in exchange 2013? I've tried to google it - but hasn't found any good answers. I would like to know if I really need more than 5 mail
-
Hello. I have a problem, that i have iPhone 4, which is locked with the operotar AT&T, because of the fact that it was bought by my parents during their journey to USA without contract, i can't unlocked it. What can i do? I really want to unlock it,
-
How to convert .flv files to .mov?
Source file = .flv downloaded from Twitch TV Need = to convert the .flv file to a format that I can edit in Final Cut Pro 10.0.6 End Result Desired = to posted editted version in format that will play on YouTube OS = Mac 10.8.2 When I download the .f
-
Is it possible to use the agilent e3633a with labview 6.1?
Hi at first, please excuse me. my english is bad if you can see in the header, i try to controll the e3633a with lab view 6.1. i´ve downloaded, the hpe363xa and controll with this vi my 3632a without any kind of problems. could i control with this vi