Windows 8 - Can My PC Run IT? Check My CPU Coreinfo Report

Hi Dear Friends,
Can anyone tell me can my CPU Run Windows 8 x86 and Windows 8 x64 thanX in advance, my CPU Coreinfo Report is here:
Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals - www.sysinternals.com
Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals - www.sysinternals.com
Intel(R) Pentium(R) 4 CPU 2.60GHz
x86 Family 15 Model 2 Stepping 9, GenuineIntel
Microcode signature: 0000002E
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX - Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
X64 - Supports 64-bit mode
SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT
NX - Supports no-execute page protection
SMEP - Supports Supervisor Mode Execution Prevention
SMAP - Supports Supervisor Mode Access Prevention
PAGE1GB - Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE - Supports direct GS/FS base access
FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 - Supports Streaming SIMD Extensions 3
SSSE3 - Supports Supplemental SIMD Extensions 3
SSE4a - Supports Streaming SIMDR Extensions 4a
SSE4.1 - Supports Streaming SIMD Extensions 4.1
SSE4.2 - Supports Streaming SIMD Extensions 4.2
AES - Supports AES extensions
AVX - Supports AVX intruction extensions
FMA - Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE - Supports XSAVE/XRSTOR instructions
OSXSAVE - Supports XSETBV/XGETBV instructions
RDRAND - Supports RDRAND instruction
RDSEED - Supports RDSEED instruction
CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 - Supports CMPXCHG16B instruction
BMI1 - Supports bit manipulation extensions 1
BMI2 - Supports bit manipulation extensions 2
ADX - Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C - Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR - Supports MONITOR and MWAIT instructions
MOVBE - Supports MOVBE instruction
ERMSB - Supports Enhanced REP MOVSB/STOSB
PCLMULDQ - Supports PCLMULDQ instruction
POPCNT - Supports POPCNT instruction
LZCNT - Supports LZCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF - Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions
DE * Supports I/O breakpoints including CR4.DE
DTES64 - Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL - Supports Debug Store feature with CPL
PCID - Supports PCIDs and settable CR4.PCIDE
INVPCID - Supports INVPCID instruction
PDCM - Supports Performance Capabilities MSR
RDTSCP - Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE - Local APIC supports one-shot deadline timer
TSC-INVARIANT - TSC runs at constant rate
xTPR * Supports disabling task priority messages
EIST - Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 - Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC - Supports x2APIC
CNXT-ID * L1 data cache mode adaptive or BIOS
MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin
PSN - Implements 96-bit processor serial number
PREFETCHW - Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 00000002 (Basic), 80000004 (Extended).
Logical to Physical Processor Map:
** Physical Processor 0 (Hyperthreaded)
Logical Processor to Socket Map:
** Socket 0
Logical Processor to NUMA Node Map:
** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
Logical Processor to Group Map:
** Group 0
RANA AZEEM.

Hi,
Please refer to the thread below:
Windows 8 processor requirements
https://social.technet.microsoft.com/Forums/en-US/c7ae3852-d2d4-42f7-8cae-919516d0e11d/windows-8-processor-requirements?forum=w8itprogeneral
Quote:
The raw CPU power (GHz) isn't the most important part.
If you want to run Windows 8 on your PC, here's what it takes:
Processor: 1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2 (...)
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)
Graphics card: MicrosoftDirectX 9 graphics device with WDDM driver
(http://windows.microsoft.com/en-US/windows-8/system-requirements)
Important are the NX bit (No eXecute) which is a security feature to disallow the execution of certain software commands (PAE, a memory address extension, is normally included in NX capable CPU's) and SSE2. SSE2 is a subset of graphical instructions
needed for the Windows 8 display. All newer AMD and Intel processors with AMD64 or Intel64 capability should show those characteristics.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • How can I create multiple selection check boxes in a report row?

    Hello,
    I'd like to know how a multiple selection checkbox can be created in report rows. In brief, I need to create a questionnaire template and each one of the questions will have multple options checkboxes, that means that the user can select more than one of the answers.
    Should I use apex_item.checkbox ?. I have no clue here.
    Please advice.
    Thank you
    Edited by: user9982480 on Jul 23, 2012 10:58 AM

    Hi,
    This might save your effort
    http://www.apexsolution.de/questionnaire/
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested i

    Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.

    There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
    Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
    Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
    LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.

  • Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

    Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

    <u>'''Anonymous'''</u>
    Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
    <u>'''chris'''</u>
    <u>'''''Crashing'''''</u>
    See:
    http://support.mozilla.com/en-US/kb/Firefox+crashes
    http://kb.mozillazine.org/Firefox_crashes
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
    http://support.mozilla.com/en-US/kb/Firefox+will+not+start
    http://kb.mozillazine.org/Browser_will_not_start_up
    ''<u>'''Hanging'''</u>''
    See: http://support.mozilla.com/en-US/kb/Firefox+hangs
    <u>'''''Hanging at exit'''''</u>
    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: [http://kb.mozillazine.org/Kill_application Kill Application]
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    [[Firefox hangs]]
    [http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
    [[Firefox is already running but is not responding]]
    ''<u>'''Safe Mode'''</u>''
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    <u>'''chris'''</u>
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -''<u>In Windows,</u>'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -''<u>In Windows,</u>'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
    <u>'''Update Shockwave for Director (aka Shockwave Player)'''</u>: your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (<u>important security update released 2010-05-11</u>; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
    NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Check to see if the resolution has been changed in System Preferences.
    Allan

  • I am running windows xp. as of today, i keep getting uninstall set pop up window. how can i get rid of it? Thanks. jim

    I am running windows xp. as of today, i keep getting uninstall set pop up window. how can i get rid of it? Thanks. jim

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I may have just downloaded something bad from a link I clicked on - how can I run a check?

    Received an email from someone I know into my hotmail account so looked ok and trusted. The email contained a link and the wording in the email stated that the person had sent me a 'hi5 notification' - to see the detail click the link.  Stupidly I did, and was then presented with the login page again requesting me to enter my password - which I did.  All I then got to see was the BBC homepage.
    I think I've been a bit dumb!  I have changed the hotmail password but am now worried I have downloaded something to my Macbook.  I don't have a virus program on my Mac as I don't emulate windows.  Any advice and is there anyway I can run a check?

    Examine this extract from The Safe Mac web site:
    http://www.thesafemac.com/mmg/
    Ciao.

  • When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

    My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
    I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
    Why are my download files being quarantined ??? Is there a security setting option I need to change???
    To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

    It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

  • Windows Vista can't find Firefox.exe on my hard drive, but it is there. How can I get Firefox to run?

    Windows Vista can't find the Firefox.exe program on my machine but it is right there in program files. Windows won't run it. After clicking on the short cut icon and after a delay I get an error message saying that windows can't find it. What can I do to fix this problem?

    Hey merodi,
    I dont fully understand your problem here,
    1. Did your computer shut down or 'die' or did you save and then you cant find it?
    2. Have you tried looking in spotlight (little magnifying glass up the corner)
    3. Have you tried opening the program again? In word and pages, if the program exited forcefully, opening it again will restore the document.

  • Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

    Windows 8.1 will not run my install CD for Photoshop 5.0. What can I do ?

    i'm not sure your expectations are realistic.  ps 5 was designed for win95.
    you can't fault adobe for failing to design ps 5 so it would be compatibile with an os that wasn't in existance when ps 5 was released. 
    to be sure, adobe did not  warrant their software would work with all future operating systems.  and no other software company can or does make such a claim.

  • Why can't i run itunes on my windows 8?, why can't i run itunes on my windows 8?

    why can't i run itunes on my windows 8 laptop..?

    Hi sincerelystef,
    If you are having issues installing iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    - Brenden

  • I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.

    iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
    1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
    2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
    Good luck, hope this helps.
    Lil

  • Can Java SE run in a Window PE (Preinstallation Environment)

    Hi there,
    Can Java SE run in a Window PE (Preinstallation Environment).
    Thank you for all your help....

    One simple reason is that ME has a lot less core classes than SE. So there is a big possibility that you use something that will not be available on the ME.

  • After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    You can always shut it down manually via the Task Manager
    (CtrlShiftEsc)...
    On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

  • Lost windows XP on Mac now running lion can XP be reinstalled and if so is it on the snow leopard disc

    Lost windows XP on iMac now running lion can XP be reinstalled and if so is it on the same disc as snow leopard    

    XP can not be reinstalled on Lion use Windows 7
    XP is not on any Apple disk, it is a Windows program you would need to buy it, just like Windows 7

Maybe you are looking for

  • How do I block messages and calls on the iPhone 5?

    Hey people, how do I block irritating message and calls on the iPhone?

  • Any Link with SAP BI and ECC6

    Hi.. Is there any Direct Link between SAP BI and ECC6. Regards Lakshman

  • Character display problem

    Hi All, When ever capital 'w' (i.e W, plain,Dialog and size 11) is first character in a text field left upper portion is not visible.But if I change any of these properties( i.e plain,Dialog, size 12) there is no problem. Can any body suggest me how

  • Communication avec microsoft access

    Bonjour a tous, Je viens vous sollicité car je voudrais m'être access de Microsoft en relation avec acrobat pro pour la création de pdf. Je vous explique j'ai une application interne qui fonctionne sous access, a partir de celle si je créer et gère t

  • GoalSeek Function in ABAP

    Hi,... Is there any function in ABAP similar to GoalSeek function in Excel? thanks