Windows 8 can not start

Hi I bought a computer for my son before 1,5 year with windows 8 installed. I made the recovery DVD media also, but he lost these DVDs. My son formatted the computer with different windows 8 DVD and some problem happened with the software and the windows cannot started. There is a recovery partition in the hard disk. I need a startup program which I can copied to USB flash memory so I can start up the computer and reinstall windows from the recovery partition. Best Regards

Hi,
Occasionally, the Welcome screen leaves a process running which prevents the second attempt to start the organizer or editor.
There is no fix but the workaround is to create shortcuts direct to the applications and use them each time.
Create shortcuts pointing to the following files:-
Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Please let us know if they work.
Good luck
Brian

Similar Messages

TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am running Windows 8.1 on desktop. When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart. What gives?

I am running Windows 8.1 on desktop. When I exit Photoshop Elements 12, I can not start program again unless I do a computer restart. How can I fix this?

Hi,
Occasionally, the Welcome screen leaves a process running which prevents the second attempt to start the organizer or editor.
There is no fix but the workaround is to create shortcuts direct to the applications and use them each time.
Create shortcuts pointing to the following files:-
Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Please let us know if they work.
Good luck
Brian

After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

additional info.
I have found the correct error definition in english.
"can not start the device (Code 10)"
I have updated my bios to the latest version.
I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
I have tried to uninstall and reinstall all webcam drivers - no luck

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

IIS Site Hosted in Web Role can not start up

Hello Team,
We occured a problem when deploying application to web role
the WaIISHost can not start up and there are two error information in event log :
Application: WaIISHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.IO.FileLoadException
Stack:
at Microsoft.WindowsAzure.ServiceRuntime.Implementation.Loader.RoleRuntimeBridge.<InitializeRole>b__0()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
Faulting application name: WaIISHost.exe, version: 2.3.1198.663, time stamp: 0x53115226
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17031, time stamp: 0x53089862
Exception code: 0xe0434352
Fault offset: 0x00000000000068d8
Faulting process id: 0x6d4
Faulting application start time: 0x01cf89326cfa011a
Faulting application path: E:\base\x64\WaIISHost.exe
Faulting module path: D:\Windows\system32\KERNELBASE.dll
Report Id: ad418c8f-f525-11e3-80bc-00155dd153c7
Faulting package full name:
Faulting package-relative application ID:
if we miss some files when deploying the environment and how to check what files are missing.
thanks in advanced.

Hello Baker.aveinc,
I understand that is a old thread, I will still go ahead and reply to this in case if this can be of help to other users.
The troubleshooting for this issue mostly depends on the status of the website on the portal. From the event logs, it appears that the faulty application is WaIISHost.exe.
I suggest that you have a look at this article that explains the scenario for Web Role Recycling.
http://blogs.msdn.com/b/kwill/archive/2013/10/03/troubleshooting-scenario-7-role-recycling.aspx
If this does not fix the issue, please post back with the status of the webrole on the portal
Thanks,
Syed Irfan Hussain

BPEL Server can not start after jazn default realm has been modified

Hi, everyone:
In order to customize my user task assigneeGroup, I set up a new realm in the jazn-data.xml using the shell (java -jar jazn.jar -shell). I tried to modify the jazn.xml file in %OraBPELPM%\integration\orabpel\system\appserver\oc4j\j2ee\home\config, and set the default-realm attribute to my new realm.
After these modification, the BPEL Server can not start, the server seems to stop after loading the first two EJB.
Does anyone ever encounter this problem? Could anyone help me?

It appears that I had the wrong oracle home and as a result some of the steps were skipped by the Universal Installer during installation, but installation was still claimed as successful. Even by launching the 'Mobile Server Repository Wizard' manually by running 'repwizard.bat' did not provide all the necessary window boxes to provide the details such as the SID, hostname, port number. I re-installed.
After starting the back-end database and then starting mobile server and testing in IE to see if the server was working by typing in http://<host name>:80/webtogo, I got the screen displaying mobile server.
Many thanks for your help.
Mark

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

Can not start HTTP_server using "opmnctl startall" after applying p4505133

After I apply patch 4505133 on win32
10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
[Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
[Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
Any idea what is going on?
thanks,

Thanks for u r reply.
resolved this issue
oracle/middleware/oracle_idm1/bin
oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
it worked.
Thanks and Regards,
sri485.

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

See Troubleshooting issues with iTunes for Windows updates.
tt2

Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more

Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Windows will not start on my NB100

I think my nb100 has become infected with a virus. It was doing some strange virus scan and I could get it to do nothing else. I turned it off and now Windows will not start. I have tried all the option; safe mode, safe mode with command prompt etc. but nothing works. I cannot run the product recovery disk because this netbook does not have a cd drive. Can anyone help?

> . How do I make a bootable USB drive?
You can make a bootable usb drive in 2 ways:
1. Manually with command prompts
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53324&tstart=60
2 Automatically using programs like WinSetupFromUSB or Novicorp WinToFlash
http://myeeeguides.wordpress.com/2008/11/15/winsetupfromusb-install-windows-xp-from-usb-flash-drive/
Message was edited by: Jeka-??

BLACK SCREEN stating "windows could not start because the following is miss

I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck!

Windows 8 can not start

Similar Messages

Maybe you are looking for