Windows 8 Destop not loaded proparly.

This problem is continuously repeating:-
When I start my laptop winodws 8 boot without any problem and login without any problem and then start screen appear after that I can navigat in it, but when I enter to the desktop the desktop appear and the task bar too but there is just the tray icons there
isn't any task bar icon and the desktop freez at the color that my start screen set to.
I can move my mouse around but I can't make any thing with the computer.
How to solve this problem?

Hi,
For this issue,please check the event viewer to see if some error log appeared when the issue occurred.
Also,please try restarting Windows explorer to check the result.
Regards,
Kelvin Xu
TechNet Community Support

Similar Messages

Windows Vista will not load on Equium P300 16T ?

Help!
My daughter's P300 won't load windows after a CF flash memory card (containing just JPEG Images) was inserted in a USB port and withdrawn during start up.
I get a windows error recovery page that says a recent hardware or software change is stopping windows loading.
Two options are given 1. Launch repair 2. Start windows normally. Neither will launch windows.
I can get the 'safe mode' screen when I press F8 at start up. When I try to start up in safe mode it just hangs after 10 seconds or so.
I can get to the BIOS screen by pressing F12 and set to default configuration. Vista will still not load.
I have lost the restore discs that were made on day one, and there is data on the hard drive that has not been backed up! So I am hoping there is an easy fix to this.

Finally sorted it!
I could not get on with WIN PE so resigned myself to losing data and doing a HDD reinstalL from the partition but could not access the HDD recovery option, I was stuffed!
I called Toshiba to ask if replacement recovery discs could be obtained? They can and at £30 with upto 30 days delivery. The nice man at Toshiba sugested that I do A power reset. (Take out the battery, disconect power supply and hold in power button for 15 seconds). He also suggested that if I could borrow a retail Vista instalation disc I could use the repair windows feature on it.
A power reset enabled me to start up in safe mode. A vista disc could not fix my problem but confirmed that there were corrupt files preventing start up.
In safe mode I was still unable to do a system restore, because of the corrupt files.
Safe mode did allow me to access and back up my data and create new recovery discs! So I was able to do a clean install having backed up my data - Bingo.
Thanks for all your help on this guys, I hope my comments on this post will help others.
MatthewH

Windows XP, will not load past blue error screen

Hi, been wondering for a while if anyone can help me...
My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
Thanks, Jay

Hi Jay,
i know what it's like to not able to boot even into safe mode command prompt.
In your case I would do either of below:
Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
I have been dealing with lots of this issues as well. Let me know if you need more help.
Good luck!
Patrick

Windows 7 does not load the ipad bluetooth drivers

I am trying to connect my ipad 2 to a windows 7 computer and the computer will not load the ipad blutooth drivers so a connection is never made.

Hi Phil,
It's funny that you say that Reflector runs on Wifi and not Bluetooth. I thought the same thing and that's why I was having a difficult time with getting this to work...on top of the bluetooth drivers not installing properly.
When you initially connct your iPad device to your computer through bluetooth, your PC installs bluetooth drivers...you can see this by the little notifictaion you get that says this. Setting up your device...installing drivers. So you can't tell me that there are no iPad bluetooth drivers.
You have to enable bluetooth on your ipad to get to the mirroring icon. (double tap your home button and scroll to the left. The mirroring icon should be visible and only visible if you have bluetooth turned on. Now if you run Reflector, then you should see the name of your PC that you shared through Reflector. Then you click on the mirroring app on your iPad and select the shared name on your PC and slide the mirroring toggle button to turn it on.
I have tested this on another laptop running Windows 7 and everything installed perfectly fine...even the bluetooth drivers.
So my conlusion is that it is the bluetooth drivers at fault here, since they didnt install properly. No matter how many times I remove the device and readd it, the bluetooth drivers do not install and I see red x's beside them.
Not sure what is keeping the drivers from being installed.
BTW...thanks for your reply Phil...see posting to this year old thread did me some good as you replied
cheers,
Tom

Windows drivers do not load

I've just upgraded to Yosemite. I then installed windows 7. All went well except that some of the drivers did not load. I used the Update Driver function to try to load them. I found the appropriate driver on my external hard drive that bootcamp located there and attempted to upload it with no success. Any suggestions?

This issue isn't an iMac or OS X question. Depending on how you installed Windows 7 (Boot Camp, Parallels, etc..) I'd recommend posting in the appropriate forum. If you chose Boot Camp I can ask the moderator to move your question.

N97 windows live will not load as well as others p...

well as listed above
i,m having a real problem getting anything to load. just wondering if i,m the only one who,s getting this problem? & could do with someone,s help please.
to start with windows messenger live will not load at all. the message i,m getting is
(this application requires the network usage. please start again under network coverage.)
the problem is i,ve got phone internet & wifi coverage so why is it coming out with this? any ideas
also i cant get many of the games that was installed to work either. that message is after hanging for a long period of time.
(you are currently in a no coverage area. please try again later)
didnt know i had to have internet coverage to play these games..
last of all the menu button light is constantly glowing on & off
i,m with 3uk & cant get any help from them at all. even the latest firmware update is not allowed as yet on my phone. was told by them that if i got the latest firmware my phones warranty would be void.
great service indeed.
although the games are not important. messenger is & would appreciate any feed back please...
many thanks Ray

Ok I can tell you the solution to your problem.
Windows Live MSN and SKYPE are free with 3 UK, which means that you can use them even if you are not paying for internet on your phone.
The problem with this is that you can ONLY use them via 3 network.
When you are at home your phone is probably defaulting to WIFI and the MSN and SKYPE will try than, so instead of getting a message "ERROR YOur should use 3" the MSN jsut hangs and does nothing. With the old firmware you had to uninstall Windows MSN and install it again in order ofr the MSN to work again. With the new one, once you are out of scope of your WIFI it works.
So you have a few options to use a Messenger.
1. Do not use your WIFI (turn it off, or whatever) and then you can use Windows LIVE MSN
or
2. Because you probably like me are paying the £5 for internet, forget about Windows MSN and use a different that works with WIFI and 3. A few of them are "PALRINGO", "EBUDDY", "FRING", etc.
Is a pain but that's the reason, for some reason the phone can not handle having some apps like the browser, etc using the WIFI and a separate connexion with 3 for SKYPE and Windows LIVE MSN.
Good luck let me know how it goes
N97 Black unlocked using the 3 Network (UK). Product Code 0586308. Firmware V20.0.019. Made In Finland.Custom version V20.019.235.10.

Driver for HP Officejet Pro L7680 windows 7 will not load (403mb)

I down load the driver, extract it and before it starts loading, get this message "Runtime error This application has requested runtime to terminate in an usual way.
I tried the disk that came with the printer when I ran vista but it also will not load on windows 7
Need some help please
Bob

Hi Silverbobcats,
Welcome to the HP Forums.
I see that you are having an issue with installing the software and drivers for your printer.
Please click on the following link and run the HP Officejet Pro Software and Driver Removal Utility.
Once the Removal Utility has finished, reboot the computer.
Click on the following link for the HP Officejet Pro Full Feature Software and Driver.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Jre 6 update 20 on 64-bit Windows 7 - Could not load the Java Virtual Machi

Hi,
I download and installed jre 6 update 20 (64-bit) on Windows 7 (64-bit).
I ran a 3rd party Java application and I got the error saying 'Could not load the Java Virtual Machine.'.
I found that the jvm.dll is installed under c:\Program Files\Java\jre6\bin\servere folder.
I checked the registry and the JVM is pointing to c:\Program Files\Java\jre6\bin\client folder.
May questions are:
1) Why does the registry point to the clinet folder instead of server folder?
2) Should I change my registry entry to point to the server folder to fix my error - Could not load the Java Virtual Machine?
3) Is there a better way to fix the issue besides chaning the regiatry?
Thanks.

Hi Igor,
I don't have proxy, neither vpn. Everything works with Java 1.6 with the same Java settings.
I tested the jnlps also with janela and the syntax seems OK.
What kind of test you mean?
I wrote this kin of code and this works also:
<pre>
try {
URL url = new URL("http://argouml-downloads.tigris.org/jws/argouml-latest-stable.jnlp");
URLConnection con = url.openConnection();
con.setDoInput(true);
con.setDoOutput(true);
con.getOutputStream();
con.getInputStream();
Logger.getLogger(App.class.getName()).log(Level.INFO,"OK");
} catch (MalformedURLException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
} catch (IOException ex) {
Logger.getLogger(App.class.getName()).log(Level.SEVERE, null, ex);
</pre>

U300 Touchpad Driver for Windows 8 Does Not Load Properly

I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
A standard mouse works just fine (albeit without any Win8 functionality).
***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

Hi,
If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system.
Meanwhile please try to enable or disable Secure Boot by referring this article:
Secure Boot
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
Kate Li
TechNet Community Support

Wont start windows and has not loaded the icons along top of screen?

mac book air will not load ms office etc only just started and all so wont load things like the wifi bar on top screen and forward and back arrows on internet bar very random and ideas please?

Search this forum for "persistence" and discover the ways to remove "toolbar shadows".

Firefox is not opening the "Show All History" Window, images are not loading and part of the new tab default page is not loading up

For about two days now Firefox has been unable to load up images, even in its menus, and the menu buttons do not open up their corresponding windows.
The page that comes up when opening a new tab has the first three webpages displayed, but the second three underneath are blank and the boxes are cut off.
Things like youtube work fine. What could be the problem?

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Windows 7 will not load on laptop. Satellite L Series

Not sure what happened with my laptop but it suddenly won't load windows. This is the error msg I get:
Intel UNDI, PXE-2.0 (build 083)
Copyright (C) 1997-2000 Intel Corporation
For Atheros PCIE Ethernet Controller v2.0.0.9 (12/15/09)
Check cable connection!
PXE-M0F; Exiting Intel PXE ROM.
No bootable device--insert boot disk and press any key
I tried using the recovery disk for system repair, and using the sfc /SCANNOW utility, but both of the just run for hours (12) and goes nowhere.
I already tried reseating the RAM and nothing.
Please help!!
Liz
Message was edited by: lizandcourtney

1. Enter into the BIOS
2. Restore to Default Values
3. Exit & Save changes
Youre system should boot up in AHCI now again. If you get the same message:
1. Enter into the BIOS
2. Go to Advanced
3. Set HDD mode to Compatible/IDE
4. Exit & Save changes
To get into the BIOS press F2 before you boot (directly after pressing the power button press F2 continiously).

Windows quicktime will not load

On Windows XP. Quicktime starts then hangs at "Loading". I've uninstalled, reinstalled several times.
Any ideas?

Solved the problem late last night. Not your suggestion. When Itunes could not connect to the server I googled the problem. Turns out something (I think Avasts VPN) had set IE to use a proxy. Turtned that off and Quicktime and I tunes worked. Also, I still use Eudora for email and graphics were not displaying. After the above, they displayed again.
So all is well.

Windows Installer will not load on Late 2007 MBP (3,1)

I am trying to install Windows on Boot Camp on my Late 2007 2.4GHz MBP running Snow Leopard. I ran the Boot Camp Assistant, created a 50GB partition, loaded my Windows disc into my drive and had it reboot to start the installer. The white boot screen loads, the cd drive spins up and after several seconds, goes to a blank (black) screen with absolutely no text or cursor. Shortly after, the cd drive spins down and then the fans speed up a bit. I never see the Windows Installer load up.
Initially I was trying to install Windows 7 x86, which I am aware is not officially supported at this time. However, the exact same thing happens when I try to use a Vista SP2 x86 disc and a Windows XP disc (non-SP2, but I would expect it to at least boot up the installer). All three of these discs should be able to boot up the installer and yet none of them do and all work fine when booted on a PC or in a virtual machine.
All I have seen online is problems with black screens after the Windows system has been installed, which is not my problem. I have also seen descriptions of a blank screen with a cursor or an error saying "No Bootable Disc Found". This is also not my case. Immediately following the typical white boot screen, the screen becomes blank as if it is off.
Thanks in advance for your help!

I have the same computer, 17", same MacOS, W7 Home Premium, 32-bit. But I have a different W7 installation problem.
After the install gets going, the first reboot happens okay but when the "completing installation ..." stage starts, after a minute or so the install freezes. My basic wired mouse locks up and the "..." stops counting.
I made a new Boot Camp 80GB partition. The first was 100GB. Starting again, I switched to another W7 installer DVD but the same freeze happens.
I suspect there is a conflict in the installation with my particular hardware. Or perhaps, the SuperDrive cannot move to the next part of the DVD. I've not seen any SuperDrive problems before this so I doubt the SD is the problem. However, I do think the SuperDrive gets too hot during extended read sessions.

Is anyone having issues with Windows 8 phones not loading mobile versions of websites?

I was just wondering if anyone with a Windows phone is having problems loading the mobile site version of a Muse site when viewed on the phone? or if there is a known bug or incompatability?

Hello, same issue for me.
The site display whith the desktop version.

Windows 8 Destop not loaded proparly.

Similar Messages

Maybe you are looking for