Windows 8 does not recognise photosmart 5510

Cannot use my HP Photosmart since installing Windows 8. Printer does not recognise my pc.
This question was solved.
View Solution.

Hi,
Please download the following program and run it on your Windows 8 machine:
http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
You need the printer on your home network.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

Windows does not recognise my phone

I get this message when I connect my phone to all computerr,
the last USB device connected has malfuntioned and windows does not recognise it??

Hello,
Check out these steps from Apple: http://support.apple.com/kb/TS1538
This should help!
Regards,
Jake

Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!

Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

HTC Desire S will not recognise Photosmart 5510 e

The phone finds the printer but does not recognise it. On the option to add a printer there are other Photosmart models listed but not the 5510 e. Is it possible to add this printer to the phone's recognised listing. Or is there another way around the problem?

Hi,
Are they on the same network ? If yes, have you installed HP ePrint app from Google Store for your HTC yet ? They must be on the same network and your HTC must have HP ePrint app.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite Pro A300-1H2 - Windows does not recognise HDD

Hi,
i'm a newbie, this has probably bin asked before so if it has you'l have to excuse me, i have a satellite pro A300-1h2.
I got the blue screen unmountable boot volume, so have tried to fit a new samsung drive. I put in my windows disc it loads all the drivers then says there is no hard disc?
In bios it recognises it ???
Thanks if anyone can help

Hi
The problem is that your notebook supports the HDD SATA controller but the OS system does not contain the SATA drivers
You could set in BIOS the SATA mode to compatible.
This will allows you to install the OS without the installation of SATA drivers.
Greets

Itunes on windows does not recognise ipad

iTunes on my windows xp pc does not always recognise my iPad. Also, the icon in the task bar which indicates when a usb device is attached, does not appear.
Neither of these problems appear when I attach my iPod.
Any suggestions will be welcome
Robin

The iPad, iPod Touch and iPhone do not appear as external drives which is why they do not show up in your Task Bar as externals the way an iPod will do if the option "Manually manage music…" has been checked. With that option selected the option "Enable disk use…" automatically becomes available which means that you can drag files to the unused portion of the drive. This is not the case with the devices mentioned above. As to the recognition of your iPad by iTunes you might want to check to see that the connection is firmly in place each time that you mount it onto the computer-- both the computer USB connection and the Apple Dock connector.

Windows does not recognise my iphone after updating the software to 4.3

Drivers for my iphone does not have Software since i downloaded the 4.3 update, it is telling me to insert a disk and I do not have one.. Please help, I'm desperate. Phone does not restart or turn off, it continuously shows the the message where to connect the usb lead to itunes, but it is not recognised.

Can anyone tell me how to reset the phone, i press the home key and the off switch together, the apple logo comes up, but it still tells me to connect to itunes but there the software is not recognised.

'Windows does not recognise USB'

Need serious help guys, brought a new ipod today and I put my iPod in and it puts some some songs onto my iPod and a couple pictures. Then 1 hour later I find some more songs and plug my iPod back in and now it's not recognising it. This USB slot is the only one being used. Please help me

ok now

Windows does not recognise an iPod

My 5G Nano suddenly stopped being recognised by my PC when I installed iTunes 10.5 yesterday.
I reset the iPod and completely removed/reinstalled all Apple software, but Windows 7 can't find a suitable driver. Any suggestions?

I have the same problem. Ill plug my ipod in and itunes will be like "theres an iPod plugged in but theres nothing you can do with it. I have the 6th gen though. I cant find it on my PC either. I've done the same thing, reset and reinstalled everything. Its making me so angry. I have so much new music on my itunes I wanna listen to. I also have windows xp.

Firefox update 8 for windows does not recognise me as an administrator. Windows 7 home control panel shows i am an administrator. What gives and how can i make the update?

hardware: Lenovo G56 laptop
OS Windows 7 Home
usual logon is using Veriface, but that executes my password.
The upgrade window asks to choose between two profiles:
one is mine, where username and password are pre-filled and greyed out, the other is called Administrator, with no password. If I insert my password in this field it saya 'no such account' and if Is elect my own logon (I am the only user btw!) it says I do not have sufficient privileges!
I am going to create a second user, also an Administrator, and see if that might overcome this issue...

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup

'USB device malfunctioned and Windows does not recognise it'

This started happening today. So I went on the Apple website to try and find a solution. I looked on all the troubleshooting advice it gave, including restarting my iPod, reinstalling iTunes, restarting my computer, I've tried everything to try and get it to connect to my computer again, but unfortunately nothing is working. Then I went to the last resort of restoring my iPod, got it into disk mode, but my computer still wouldn't recognise it so, I couldn't even restore it. My iPod is basically new, I only got it for Christmas 2010 and I'm always careful with it. I don't know if it might be something to do with the drivers needed to recognise my iPod or if it's the actual iPod, but I have no idea how to go about fixing it. Please help me!

yea
In some cases you might have to change the Usb cable, change the usb port, check if the computer drivers and properly installed, restart the computer and relaunch itunes again to restore. i dont know if you also used this but click on this link and you might see you solution http://support.apple.com/kb/ts1567
Good Luck J

Windows does not recognise nokia 3500 connected wi...

Generally I use my phone as a modem . As I didn't have a usb cable I used bluetooth to connect my phone. I tried to upgrade my phone's software using it's onboard software updater it says "no update found" though my phone's software version is 5.51 . Then I tried to use software updater but it said I need a data cable. Then I bought a cable. I connected my phone and choosed nokia mode . Phone shows that it has been connected but pc shows nothing-no sound,no pop ups nothing. Then I opened nokia pc suite but it was showing "no phone connected." . I opened the get connected wizard and selected cable connection but it was showing please connect your phone though my phone was connected. I used different ports and found no problem with the ports . Then I tried to connect nokia 6500s and nokia 3110 classic. Nokia 6500 connects with no problem but 3110 classic has the same problem as 3500c (which has same mini connector socket like 3500c). I used three different data cables but no luck with none of them. How to solve this?

Hello,
Check out these steps from Apple: http://support.apple.com/kb/TS1538
This should help!
Regards,
Jake

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

Windows 8 does not recognise Excite 10

Windows 8 does not recognise Excite 10. Before win7 done this without any problems, now win8 looking for drivers! can anybody advice me what to do

Hi,
Please download the following program and run it on your Windows 8 machine:
http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
You need the printer on your home network.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 8 does not recognise photosmart 5510

Similar Messages

Maybe you are looking for