Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

I have downloaded drivers for windows 8 for my HP Officejet 6500 E709a Series printer, but the windows 8 system does not recognoze them.

Hi,
What is the error message ? Where do you download from ? the following file or a different file ?
http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-1/OJ_AIO_6500_E709_Full_Win_WW_140_408.e...
Please download the above file then install again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Windows does not recognize driver for pci-4461

Hello,I am currently running windows xp with labview 7.0 on my computer. Recently trying purchased and trying to install PCI-4461 Audio Analyzer PC card. I downloaded the latest driver 9.0.2 off the NI website. After the install I verified the driver exist by using the Measurement & Automation tool. However, window does not recognize any driver for the hardware. When I point it to the directory where the driver is "suppose" to exist, windows gives me an error message saying that the driver does not exist or is corrupted. I've tried uninstalling and reinstalling several times. Has anyone ran into this problem and can give me some advise? I know that the version on DAQmx 9.0.2 is not compatible with the version of labView I am running. However it should not affect windows from locating and installing hardware. Thank you,Ruth

Hi Ruth,
Did you install the PCI-4461 card in your computer before or after you installed the DAQmx 9.0.2 drivers? It would be best to install the drivers first and then the card. Windows XP will pop up the New Hardware Wizard, saying it detected new hardware. Click Next, and then to Search for Drivers Automatically. Do not try to navigate and select the appropriate driver folder. As long as the drivers are installed correctly Windows will be able to find the correct driver automatically.
You can also remove the PCI-4461 card and try it in a different PCI slot. This will cause the new hardware wizzard to appear on the next restart.
Eric S.
Eric S.
AE Specialist | Global Support
National Instruments

One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

USB device (1 day old nano) has malfunctioned & windows does not recognize

Please can someone help a non-tech savy new ipod user. I have loaded the latest itunes, but not only does itunes not see my ipod, I get the following windows error when I plug it in. "One of the USB devices attached to this computer has malfunctioned and windows does not recognize it". It says no drivers are loaded for this device. I have followed the 5Rs including the windows updates with no luck. If anyone can help I would really appreciate it.
Thanks
sampsona

You listed as having an IBM r40. If I'm not mistaken, that's a laptop. The usb ports on many laptops aren't USB 2.0 or are low power ones. This can cause problems with a nano being able to charge.
One thing to try is to get a wall adapter to charge the nano separately, then connect to your computer for syncing only. You can find adapters locally and through Apple Store. http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=C39 415D1&nclm=iPodPower
You can also try buying a POWERED usb hub. Make sure it has it's own power source so that its ports have enough charge to support the nano.
Custom PC & iMac (DV Special Edition), iPod Nano 1st, iPod Click Wheel Windows XP Pro Work in a variety of PC and Mac environments

One of the usb devices attached to your computer has malfunctioned, and windows does not recognize i

I am a damsel in distress. Every time I turn on my printer, I get ths message: "One of the USB devices attatched to your computer has malfunctionedand windows does not recognize it: . All was fine until I put in new ink today. I had not used the printer for about ten days prior to this. I went through the HP line of troubleshooting but nothing has worked. I have Windows 7 64 bit
Thank you
Katt

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Windows does not recognize ipod whatsoever

This is so frustrating.
I just bought a new ipod video after giving up on my old ipod.
Windows does not recognize the new ipod at all, not even as an extra drive. I'm tried uninstalling and reinstalling everything, restoring the ipod, connecting to different ports. No such luck. I've read up on the past posts concerning this problem with no luck.
Can anyone help me?

here's a bit here's what microsotft says:
To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
3. On the Edit menu, click Delete, and then click OK.
4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
5. On the Edit menu, click Delete, and then click OK.
6. Exit Registry Editor.
7. Restart the computer.
it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

Windows says "device is not functioning" and "Windows does not recognize"

I lost my USB dock connector cable for my ipod. I just went out today and bought a brand new "Cygnett GrooveLink Strech Retractable USB Cable for iPod". I was pumped when I came home to finally be able to add music to my ipod again, but alas when I plug the iPod in, Windows pops up saying that the device is not functional and that Windows does not recognize it. I tried everything from rebooting the iPod to re-downloading iTunes and iPod updater. After searching this site for the past few hours, I figured I'd try and possibly find some real answers here. Please Help!!

Hey everyone,
I had the same problems all of you are having. I
just got a 5th generation video ipod. For a few
days, my computer a) wouldn't recognize it; b) froze
up when I connected it; c) mistook it for a mass
storage device ("drive E"). I bought a USB 2.0
notebook card which didn't work either and actually
seemed to make the problem worse because when I
connected the iPod to it my computer froze up.
I was very confused because my new iPod worked on my
brother's computer--which is much older than mine but
still recognized the iPod and connected to it.
Then I noticed that my brother's computer is running
an older version of the ipod software. I used his
disk to install "Ipod Updater 2005-06-26" rather than
the new version of the software on the Apple Web
site. Then I plugged my iPod into a USB 1.1 port.
To my surprise, my computer finally recognized the
iPod and is now loading music onto it. I cannot
believe this worked. I wonder if the latest version
of the software is faulty in some way.
Try it! I hope it will work for you too. You will
need an older version of the iPod updater software,
so borrow it from a friend with an older ipod.
I am having this problem also...It will work fine on the 1.1 but when i plug it into the 2.0 it has trouble recognizing it...

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

One of the USB devices have malfunctioned and windows does not recognize it---MESSAGE

Upon plugin, One of the USB devices attached has malfunctioned and window does not recognize it message is displayed. I have tried different settings with the USB driver. Have reset the ipod. Have reinstalled itunes on computer and ipod.
HELP PLEASE!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

Similar Messages

Maybe you are looking for