Windows 8 Driver update for LaserJet p2014/2014n, cp1215/cp1217, m1120/m1120n MFP, m1319f MFP

The Windows 8 drivers for the following products are not available yet. In the meantime, customers can install and use published Windows 7 drivers on full Windows 8 OS's. However, the following known issues are listed below. Please be aware this is a temporary work around and customers are encouraged to download Windows 8 drivers as soon as they become available.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
This question was solved.
View Solution.

Driver update:
m1005
m1120
m1319
cp1215
cp1217
p1007
p1005
p1505
p2014
The above drivers are now available for download. Just click on the links to be taken to their product home pages.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

Windows 8 64-bit driver update for LaserJet P1006?

When will Windows 8 64-bit driver update be available for HP LaserJet P1006? I would prefer to not have to purchase a new printer. I have checked the website for downloads, but the message says the update will be available in late 2012.... it's now 2013! I'm ready to print!

Hello kitkat915,
Try with the basic driver with the following steps:
1. Download the next driver to the windows desktop >> ljP1000_P1500-HB-pnp-win64-en.exe [1/1, 3.54M]
2. Once downloaded in the desktop right click the driver file and select Properties.
3. Click on Compatibility tab.
4. Check the box where it says "Run this program in compatibility mode for:"
5. In the dropdown option select "Windows 7"
6. And in Privilege Level check the box where it says "Run this program as an administrator"
7. Now click on Apply and OK buttons to close the Properties window.
8. Then start the instalation, double click the driver file "ljP1000_P1500-HB-pnp-win64-en"
It may look like the next screenshot:
Spoiler (Highlight to read)
Hope these steps helps you
* Click on KUDOS star to say thanks
* Click on the button Accepted Solution if the question is answered.
Regards,
ferRX.

Lenovo 3000 K need PCI Simple Communications Contr. Driver update for Windows 7

PCI simple communications controller on my 3000 K series needs a driver update for the upgrade from Vista to Windows 7. I have a 64 bit system. I had no errors during my install,and Windows 7 has been working well. What can I do???
Solved!
Go to Solution.

hi ladyr1der,
Welcome to Lenovo Community Forums!
Please try installing this driver,
Intel Management Engine Interface
Restart the system after installation and check.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Windows 7 driver support for T60(p)

Hello all
Im a happy owner of a Thinkpad T60P, 2007-8LG model. However, im getting much tired of Windows XP and want to use the upcoming Windows 7 OS, but im a bit unsure if there will be any driver updates for the T60 models.
I've seen the Windows 7 beta drivers page from Lenovo, but this only includes drivers from T61 and up. Can anyone confirm that there will be drivers released for T60(p) models as well (or in case the product line is ditched).
Thanks in advance
Solved!
Go to Solution.

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)

My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:

Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Failed Installation "fbl_impressive Professional 10074" "Realtek Semiconductor driver update for Realtek high definition audio"

Windows 10 build 10041, I tried several times over two weeks to do the update.
The update starts to settle and then ends in failure.
for the following updates:
"fbl_impressive Professional 10074"
"Realtek Semiconductor driver update for Realtek high definition audio"
NVIDIA driver update for Geforce GT 240M
Do you have a solution? thank you

Hi,
To download Realtek driver, you'd better to access realtek official website to search and downlaod your device driver:
http://www.realtek.com/downloads/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Where can i download Intel HD driver update for Satellite A660-1en?

Where can i download Intel HD driver update for satellite a660-1en?
(i can't install windows 7 sp1)
http://support.microsoft.com/kb/2505743

>cant insall last driver from intel(they told me that i must download new driver from Toshiba
It is possible to install the driver from Intel but you have to do this is device manager!
You have to FORCE windows choosing the downloaded driver and this can be done using the advanced installation procedure. This helps to choose the driver from Intel and to finish the installation!

Realtek semiconductor corp driver update for realtek high definition audio

realtek semiconductor corp driver update for realtek high definition audio

You may download the audio driver from here:
http://www.realtek.com/downloads/
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows 10, Driver updates, VIDEO_TDR_FAILURE (atikmpag.sys)

Windows 10, Driver updates, VIDEO_TDR_FAILURE (atikmpag.sys) Hello, Five days ago “windows update” updated the software, and from than on I had problems. The computer started normally, but after it completed the task, than restarts all over again and again. I tried to fix the problems with “safe mode”, than with “restore to previous restore points”, than “recovery” but to no vain. At the end, after I tried with image recovery and full recovery, it seems I destroyed all the software. It couldn’t start even in safe mode giving me the message it did not completed normal start before, which it wasn’t possible to do. My last rescue was to upgrade to Windows 10. It works all fine, as long I do not connect to the internet and the drivers are not updated, because the same problem starts. Windows 10 restarts all over again to fix the problem, with no results so far. In the device manager, after basic installation of Windows 10 and without updates, I have the following errors: Microsoft basic display adapterPCI simple communications controller Windows 10 gives me the following message: VIDEO_TDR_FAILURE (atikmpag.sys) My computer is HP 6200 Windows 7. It was checked and found ready for an upgrade to Windows 10. How can I fix the problem? With regards,Thomas

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! Please review the following document, to see if the issue can be resolved:HP PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 10, 8, 7) You may have to use the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once that is done, you can try to perform another System Recovery:HP PCs - Performing an HP system recovery (Windows 7) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Windows 8.1 update for Lumia 620

When can we get Windows 8.1 update for Lumia 620 in India?
Solved!
Go to Solution.

Once it's available which, as extensively and widely announced, will be somewhere 3rd quarter of this year.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Driver updates for Belkin components busport.

Hello,
A friend has an old horizontal beige G3 to which was added a Belkin Components 2xUSB busport. The original floppy disk contains the driver for pre 8.5 systems, but the manual advises going to Apple UK website for driver updates for use with OS 8.5 to 9.
Can't find any sign of this update on Apple UK - which isn't surprising of course given how long ago it was issued, but can anyone point the way to a download for this driver? Would be most grateful..
Thanks....BC

The download that is available by itself is OK for 8.6. It specifically states it is not useable for later versions of OS9. It includes USB extensions v 1.4.1.
These are the extensions that install when you re-install with the card in place in the machine:
USB Extensions From Mac OS 9.2.1:
HID Library 1.5.5
USB Authoring Support 1.1.2
USB Device Extension 1.5.5
USB Mass Storage Support 2.1.1
USB Printer Sharing 1.0.2
USB Printer Sharing Extension 1.0.2
USB Software Locator 1.5.5
USB Support 1.5.5
USBAppleMonitorModule 2.1
From Mac OS 9.2.2
HID Library 1.5.6
SerialShimLib 1.5.6
USB Device Extension 1.5.6
USB Software Locator 1.5.6

Driver Updates for Acer Aspire 5750Z Help

I have successfully did a complete System Restore,which worked great. Bit I'm sure that some, ifnot allo, my drivers should be updated. Where do I get driver updates for Acer Aspire 5750Z. I have never done anything like this before so if someone could give an old man any advice as to how I should do it would be appreciated. Thank youG

http://us.acer.com/ac/en/US/content/drivers/3681;-;Aspire%205750Z here you will find the latest available for your model, simply click on the download link of the drivers you need to update, then unzip the file (just right click it and choose to extract), then browse to the driver folder and double click install.exe or setup.exe, then follow on screen instructions.

Windows 8 Driver update for LaserJet p2014/2014n, cp1215/cp1217, m1120/m1120n MFP, m1319f MFP

Similar Messages

Maybe you are looking for