Windows 8 Event Viewer reports errors

1) Error: Source DistributedCOM; The server {....} did not register with DCOM within the required timeout.
I have changed the service startup to Automatic with delay with no result.
2) Error: Source Service Control Manager; The HP Network Devices Support service terminated with the following error: The specified module could not be found.
I am unable to find a way to reinstall this module. Granted this may be an HP support issue.

Hello @OrygunGuy ,
Thanks for posting on the HP Forums!
I'm sorry to hear about your errors. To resolve all your issues, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh, likely on Windows 8.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
Please let me know your results. Thanks!
Mario
I worked on behalf of HP.

Similar Messages

Error in starting nidevldu and nipxirmu services (windows event viewer)

A computer running Windows XP SP1 and a Visual basic (V6.0) application that I've developped had crashed several times. I've seen lots of errors in the Windows event viewer saying that the nidevldu and nipxirmu services were trying to start (exact french message : Le service nidevldu est en attente de démarrage et Le service nipxirmu est en attente de démarrage). These messages are real errors (not warning or informations).
I use a 6034E PCI card, Visual basic V6.0 and NI-DAQ 7.4.
The crashes I've seen may be linked with this problem.
Is there a solution?

Hi,
I think that you are not going to be starting and stopping the devldu service in normal circumstances... due to crashes !
The firsts steps you have to focus on is to optimize your program in order to avoid crashes, which is not a normal way of work I guess. Then you will be able to avoid these messages!
Regards,
David D. - Application Engineer - NI

Illustrator CC crashes on startup(windows event viewer message included)

Windows event viewer shows like this...
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-12-09T06:35:08.000000000Z
EventRecordID
71639
Channel
Application
Computer
HPNB-dhleeNB
Security
EventData
Illustrator.exe
17.0.0.260
52822426
ntdll.dll
6.1.7601.18247
521ea8e7
c0000374
000ce753
a690
01cef4a8afb2dd09
C:\Program Files (x86)\Adobe\Adobe Illustrator CC\Support Files\Contents\Windows\Illustrator.exe
C:\Windows\SysWOW64\ntdll.dll
0b8a3ab7-609c-11e3-8e0d-005056c00008
Please help.

Problem solved.   Refer to below.
3 posts
Nov 25, 2013
2.AlanDrVita,
Nov 26, 2013 9:16 AM   in reply to outdoorz
Report
I may have been able to resolve my issue. I held shift while opening Illustrator and opened it in a bare bones mode, then closed it and reopened it without getting the error message. Good luck to you.
Was this helpful? Yes   No

Event Viewer ACPI error MBP mid09

Hi, I have installed Win 7 on my MBP 5.5 mid 2009 and although its running well I am getting an error message in event viewer saying:
Error
25/09/2014 00:00:32
ACPI
13
None
something about the embedded controller failed to start in a reasonable time. Would anyone with the same mac please check their event logs to see if they have this error please?
I had this and a HAL error under Win 7 ultimate x64 (used this as a test os) so I installed Win 7 Pro from a Genuine Disc (I do not condone piracy) and I am getting the ACPI error (only after all the drivers were installed, the error message didnt show prior to boot camp 4 install). So before I spend £100 on a Genuine Windows disc (I already purchased Windows 8 at £106 but it seems apple dont support it on this mac :-(...) I'd like to know if its a failing logic board or driver related.
Thanks in advance
Darren

I have been running OSX for around 1 hour and then I rebooted into windows 7, loaded the event logs immediately and found the ACPI error had been recorded precisely 1 hour before windows had booted, I am wondering if this could be a bug between Mac/Windows time feature. after more restarts the ACPI isn't being recorded and other events times are correct.
edit:
I have just disabled the Synchronise with internet time feature in windows. I'll keep a look out.

Labview 2010 randomly restarts computer - windows event viewer points to nap agent

When running my current VI that I am working on, the computer will ranomly reboot. There is no freeze, or blue screen, just a reboot. When examining the windows event viewer after the reboot, the following warning is listed immediately preceding the reboot:
Event ID 39
The Network Access Protection Agent was unable to determine which HRAs to request a health certificate from.
A network change or if GP is configured, a configuration change will prompt further attempts to acquire a health certificate. Otherwise no further attempts will be made.
Contact the HRA administrator for more information.
Previous to getting this warning before a reboot, I was getting the following error:
Event ID 10016
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
This is a DCOM service eror and the CLSID is referring to NAPAGENT. So I configured DCOM to allow the NAPAGENT to start and now I get the Event ID 39 warning and still get the reboot.
I am not sure why labview is even asking for DCOM or NAPAGENT to start at all. My VI is simply reading information from two serial instruments.
This reboot behavior does not occur when the computer is not running labview.
I am attaching a copy of the main VI, if it will be helpful I can post the sub VI's as well.
Thanks in advance for your help.
-Justin Lee
Attachments:
testscan10.8.vi ‏179 KB

Hi Joe,
Thanks for the reply.
I am running windows XP pro service pack 3.
I am running a standard instal of labview 2010 with the latest VISA drivers, no other modules or options installed.
I am only reading and writing to the serial ports (com) in my code. I don't believe that virus/spyware/malware is to blame for several reasons.
1. This only occurs when running this VI in labview.
2. I have replicated this problem on another computer.
3. I am behind a government (DOE) firewall and virus scans and checks are performed constantly.
4. If I take out the serial portion of my code via a T/F case structure, it will not crash.
The code will run fine for sevetral hours sometimes and then crash, other times it will crash after only a few minutes.
Please let me know what other information you require.
Thanks!
Justin Lee

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

T410 2516CTO random freezes without anything in Windows Event Viewer! :(

I used Update Retriever + Thin Installer (virtually System Update 4.0 but a server + client version of it) to download drivers and install Windows 7 Ultimate x64 with SP1 on this machine. A hard power off is required by pressing on the power button for 5+ seconds
Core i7 620M
8GB RAM
320GB 7.2k rpm HDD
Optimus graphics
Gobi2000 WWAN
uPek Fingerprint reader
The machine freezes without any warning and has done so with both the factory install (more frequent) and with the HDD wiped and using Microsoft's Windows 7 Ultimate SP1 x64 slipstreamed (freezes much less frequently). Are there tools that I can use to help diagnose this problem?
I have also used a 90W AC adaptor and 65W adaptor on this machine. The random freezes happen on either adaptor as well.
I read of other people who have the same frustrations over freezes but no other situation described is exactly the same as mine unfortunately -- most other occasions you can find something in Windows Event Viewer!!
Solved!
Go to Solution.

Hi again
Found out that it was the Intel WiFi 6300 that was locking the machine. Disabled it via h/w switch or BIOS made the freezing disappear altogether.
So there we go. A once off incident of a failed 6300 WLAN card.

B570 windows event viewer errors

I've just noticed these errors in windows 7 event viewer, does anyone know what would be causing the problem and if there's a fix to resolve it?
http://i.imgur.com/Imljb.png
thanks.
link to image image(s) >50k converted to link(s)

Hi B570,
Well, let's see. Running the AV scan isn't really stressing the CPU and your temps look okay.
Did running the scan trigger a warning?
Do you get any warnings just running on battery?
To find out whether it's the same problem as your links, the CPU will have to be stressed while you're on AC power and the battery is charging. Check the temp then and whether doing this triggers a warning.
It's like I said above, not knowing what the machine is doing during one of those warnings makes it hard to tell what's causing this.
I would discharge the battery to the point when it will charge. Plug in the AC and open a browser and watch a youtube movie full screen, play some music in the background, have a couple of browser windows open. That should stress it enough to raise the temp. and "maybe" give you a warning.
If doing this does give you a warning, then charge the battery up so it doesn't charge and do the same thing as above and see if that gives you a warning. If you get the same warning doing this, then the warning isn't the same as described in those other threads.
If none of this gives you a warning, then we'll have to figure something else out.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

OCS 10.1.2.2 Windows - oidldapd.exe - Event Viewer reports faulting appl.

Hi, just a (maybe) useful information:
I had troubles with several errors about OIDLDAPD.EXE reported in the Event Viewer on my Win2003ServerR2 box (OCS 10.1.2.2 installed).
I was also experiencing stability problems. Now and then, parts of the environment (mail application and calendar especially) where crashing.
I went into "my server" --> properties --> advanced, and excluded "oidldapd.exe" from being checked by the "Data Execution Prevention" feature, that was (at least on my server) enabled by default for all the processes running on the machine.
Now, everything seems to run smoother than ever (at least during last week). No more instability, no more records in the Event Viewer.
Hope this can be of help for anyone having similar problems.
Roberto

Hi,
It could be a case of a corrupt installation which could be causing the crash.
Could you please follow, ʇɐb ɹəuəllıʍ suggestion, and uninstall the current installation of Adobe Reader 10.1.2 and restart if prompted for.
Try and install Reader 10.1.0 again (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/zh_CN/AdbeRdr1010_zh_CN.msi).
Now update the same to 10.1.2 using the installer from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.2/misc/AdbeRdr1012.msp
Try and launch Adobe Reader post the successful installation.
Do ensure not to launch the application during the updating process.
Hopefully this should fix things.
Thanks
Ankit

Event Viewer reporting continuous problem with Firefox

I had to disable McAfee Site Advisor because if enabled I could not use the back and forth arrows on the browser in some instances. In trying to track this problem down I discovered there is a continuous problem reported in Event Viewer with this information:
The entry <C:\USERS\CINDY\APPDATA\LOCAL\MOZILLA\FIREFOX\PROFILES\PV0GC0WS.DEFAULT\CACHE\_CACHE_003_> in the hash map cannot be updated.
Context: Application, SystemIndex Catalog
Details:
A device attached to the system is not functioning. (0x8007001f)
Can anyone please help with this?

The error could be something trivial, it will depend really on what problems you are having, and I note you have made a few other posts.
* One article you may find useful is [[Basic troubleshooting]]
* Also see [[Safe Mode]] & [[Troubleshooting extensions and themes]]
** Note when using safe mode normally do not make changes in the first dialogue Window you see just click on the continue button (Unless you really do want to reset something)
** Also note whilst Safe Mode does disable plugins, it will not always stop all external software interacting with firefox .
A basic principle of troubleshooting is to reduce as many unknown interactions as possible, so in the case of Firefox disabling or removing as many extras as possible.
If you are determined to check what is in the firefox caches then use ''about.cache'' simply type it into the location bar and hit return, it is relatively user friendly and shows masses of info about what is cached, there is also an [https://addons.mozilla.org/en-us/firefox/addon/cacheviewer/ add-on cacheviewer] Even without the add-on you may be able to figure out what the item is, and whether or not it is updating.
I do not even use Vista, but presumably an event log entry may not necessarily relate directly to Firefox use.
''"in the hash map cannot be updated.
Context: Application, SystemIndex Catalog "''
I would hazard a guess that the above message may relate to disk indexing; if so it will possibly have nil impact upon Firefox operation.
I do recall problems being mentioned on this forum about Site Advisor and Firefox, and note some versions are on the [https://www.mozilla.com/en-US/blocklist/ blocklist] for Firefox 4. If you have problems with SiteAdvisor it would be worth ensuring you have the very latest compatible release of Site Advisor.

Event viewer Issues "Error 0x80070005"

Hello this is the severity: warning i keep getting for a user in event viewer
"Error 0x80070005 occurred while creating known folder {3EB685DB-65F9-4CF6-A03A-E3EF65729F3D} with path 'C:\Windows\system32\config\systemprofile\AppData\Roaming'."
Is someone familiar with this warning/error message and how to stop it from coming up. Also if it helps the user pc is on a domain and im the admin for it.

Hi,
How is the current situation? Have you check its permission?
Please run chkdsk /f /r command to fix and recover the disk error:
Run Check Disk from a Command Line to Check for and fix Disk Errors
https://technet.microsoft.com/en-us/magazine/ee872425.aspx
Meanwhile, please refer to this familiar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/047bdb94-9958-4e8e-a112-4555e1ee3ad4/known-folders-errors-in-event-viewer?forum=w7itproperf
Karen Hu
TechNet Community Support

Event viewer subscriptions error code 0x32

I’m using windows 7 home premium trying to configure event viewer subscriptions.
But getting error code (0x32) .
[hadi-TOSH] -
Error - Last retry time: 4/9/2014 6:28:35 PM. Code (0x32): <f:ProviderFault provider="Event Forwarding Plugin" path="%systemroot%\system32\wevtfwd.dll" xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault"><t:ProviderError
xmlns:t="http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog">Windows Event Forward Plugin failed to create subscription.</t:ProviderError></f:ProviderFault>
Next retry time: 4/9/2014 7:08:35 PM.

Hi,
Please make sure the Windows Event Collector service is started. You must be a member of the Administrators group to start this service.
http://technet.microsoft.com/en-us/library/cc748890.aspx
Kate Li
TechNet Community Support

IPod 5G freezes iTunes, Event Viewer System Error

iPod 5G not playing nicely with iTunes, syncs iPod then freezes PC, unable to exit iTunes or disconnect iPod w/o rebooting system.
In Event Viewer>System, I found this:
Event Source: PlugPlayManager
Event ID: 256
Description: Timed out sending notification of device interface change to window of "program or service name and/or GUID."
thx-
c.

cronish
Have you been able to verify that your iPod is functioning properly by hooking it up to another computer?
If so, then here's a REAL shot in the dark.
Restart your computer and go into the Bios and turn off Hyperthreading if it's enabled.
If that doesn't work then re-enable it.
Jim

Crystal Report Windows Forms Viewer - No Error Popup

Similar to this post: Error message that says "No Error" from CR Viewer, I have just upgraded by Application to .net 4.0 and Crystal Reports 2010. The report viewer works fine the first time a report is loaded, but when I change the parameters on the report, and put the updated report back into the report viewer, I get the message shown above. The report does not change its parameters and the updated report is not displayed. The code in question is setting the date parameters for the report. The user can select new date parameters from the form that encloses the report viewer. The code subclasses the Report Object code to add additional functions through interfaces. The IDateRange interface provides a starting and ending date range for the report using a property on the report class as follows:
    Public Property EndingDate() As Date Implements IDateRange.EndingDate
        Get
            Return _endingDate
        End Get
        Set(ByVal value As Date)
            _endingDate = value
            Me.SetParameterValue("EndingDate", value)
        End Set
    End Property
In addition, the immediate Window shows the following message:
A first chance exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
The code in the Report Viewer looks like this, see line marked in blue for when pop-up appears:
''' <summary>
''' Sets the report period and displays it.
''' </summary>
''' <param name="Report">The Report.</param>
''' <param name="Refresh">if set to <c>true</c> force a refresh.</param>
Private Function PFSetReportPeriod(ByVal Report As Object, Optional ByVal Refresh As Boolean = True) As Boolean
    Dim fld As FormulaFieldDefinition
    Dim bRefresh As Boolean = False
    Dim rpt As ReportClass = CType(Report, ReportClass)
    Try
        If CRV.ReportSource IsNot Nothing Then
            rpt = CType(CRV.ReportSource, ReportClass)
        End If
If TypeOf rpt Is IDateRange Then
    With DirectCast(rpt, IDateRange)
.        StartingDate = dtpFromDate.Value
.        EndingDate = dtpToDate.Value
    End With
    SetTitleLine2(DirectCast(Report, ReportClass), bRefresh)
    bRefresh = True
Else
    If TypeOf rpt Is ReportClass Then
       fld = rpt.DataDefinition.FormulaFields("FromDate")
       If Not fld Is Nothing Then
            fld.Text = "Date(" & dtpFromDate.Value.Year & "," & dtpFromDate.Value.Month & "," & dtpFromDate.Value.Day & ")"
            bRefresh = True
        End If
        fld = rpt.DataDefinition.FormulaFields("ToDate")
        If Not fld Is Nothing Then
            fld.Text = "Date(" & dtpToDate.Value.Year & "," & dtpToDate.Value.Month & "," & dtpToDate.Value.Day & ")"
            bRefresh = True
        End If
        SetTitleLine2(rpt, bRefresh)
    End If
End If
    If Refresh And bRefresh Then
        If dtpToDate.Value <> CDate(dtpToDate.Tag) OrElse _
           dtpFromDate.Value <> CDate(dtpFromDate.Tag) Then
                System.Windows.Forms.Application.DoEvents()
            If CRV.Visible Then CRV.ReportSource = rpt ' The popup appears when this statement is executed.
            If CRV.Visible = True Then CRV.Refresh()
            dtpToDate.Tag = dtpToDate.Value
            dtpFromDate.Tag = dtpFromDate.Value
           Return True
        End If
    End If
Catch ex As Exception
    DisplayException(ex)
End Try
Return False
End Function

Problem has been resolved. I downloaded Support Pack 8 (v.13.0.8.1216) from this location. I then applied the fix from the entry above:
With CRV ' Report Viewer Control
    If .Visible Then
        If .ParameterFieldInfo IsNot Nothing Then .ParameterFieldInfo.Clear()
        .ReportSource = rpt
        .Refresh()
    End If
End With
And no more annoying "No Error" messages.

Windows 8 Event Viewer reports errors

Similar Messages

Maybe you are looking for