Windows 8 failure to load after restart - stuck on automatic repair or Lenovo screen

I have a 1 week old Lenovo G580
 Intel Core i3 3110M(2.40GHz) 15.6" 4GB Memory DDR3 1600 500GB HDD 5400rpm DVD±R/RW Intel HD Graphics 4000
Came with Windows 8 x64 ent
Had previously been working beautifully. 
I closed the lid to put it to sleep and when I opened it back up the sound driver was not working.  
So I restarted Windows.
Ever since that restart, I can not get windows to load.
It either gets stuck on the black Lenovo screen or goes into the Automatic Repair mode, tries diagnosing my PC.  Some of the times the error feedback it has given me is to search online for CRITICAL_PROCESS_DIED.....but none of what I have found helps. 
The automatic repair eventually prompts me to do a system restore.  However, when I click 'Restore' it then goes to the Black Lenovo screen for about an hour.  I haven't had the patience to let it sit like that for more than an hour, and IMO with ZERO feedback on the restore process I guess that means there was some restore failure.
I was finally able to get into the Lenovo Setup Utility (pressing F2 IMMEDIATELY on powerup) but so far none of the boot option changes have helped. 
Is there any other way to do a 'hard restore' while saving my data?  Is there a way to update the BIOS or registry options from the setup utility?  I'm feeling extremely limiting because the setup utility is the only alternative screen I can reach.
Anything helps, 
Thanks. 

SO it finally restored.
I guess the system restore with windows 8/lenovo just takes several hours and gives no feedback during the process. Just the black screen with lenovo. So I left that on for 3+ hours and it restored to a previous date. yay!

Similar Messages

  • Server 2012 R2 Essentials stuck in Automatic repair loop on every reboot

    We are running Windows Server 2012 R2 Essentials on a brand new Dell PowerEdge T110. Nothing new has been installed or are we running any special software. This server is a doing DHCP, Domain Controller and DNS. It is also intergrating the Office365. 
    I am assuming a windows update did this but i cannot pinpoint when exactly this happened and which update since it was a couple months ago. But everytime we try to reboot this server it goes to that Windows 2012 repair screen and asks us if we want to troubleshoot.
    I am able to break this loop by going into safe more and then rebooting but this doesnt fix it, it only allows us to then boot windows normally once after that. But this can only be done when we are onsite and not remotely so we havent rebooted this server
    or ran new windows updates in quite some time.
    Any help or input would be appreciated.
    Thank You

    Hi,
    On current situation, please use Bootrec.exe to troubleshoot this issue. for more details, please refer to
    the following KB.
    Use Bootrec.exe in the Windows RE to troubleshoot startup
    issues
    Meanwhile, please refer to the following similar thread and check if can help you.
    Windows
    Server 2012 essentials stuck in automatic repair loop
    Hope this helps.
    Best regards,
    Justin Gu

  • Lenovo G780 stuck in Automatic Repair Loop after Windows 8 update

    My recent Windows 8 update stuck my computer into an infinite automatic repair loop which results in a blue screen amd the process repeats itself. I tried the OneKey restore feature and the system recovery feature just hangs then it goes back to the same loop issue with rebooting. I called Lenovo for recovery discs since I don't have any any but my concern is does it matter if I mentioned whether I had a 32 or 64 bit OS? I told her to make sure it was for a Windows 8 system amd she just said it works for the G780 models. I'm just hoping these discs work.for a 64 bit system

    It should work. Support cannot send you recovery disks if you didn't provide them your serial number. They can check the correct pre-installed OS from your serial number so I'm sure they're sending out the correct disks.

  • Yoga 2 Pro Windows 8.1 stuck in automatic repair loop

    So my Yoga 2 Pro is stuck in the (in)famous Windows 8 Automatic Repair Loop, and I'm not sue how to fix it now. I unfortunately neglected to create a Recovery USB stick, so what are my options without it?
    I've already tried booting the computer with the Novo button and choosing System Recovery, but at that point the system goes right back into the Automatic Repair loop. I'd strongly prefer to back up my data before resintalling Windows if that's an option--is it possible to stick the SSD into another computer to do so?
    Also, would a USB recovery disc created by someone else with a Y2P be useable on my system? I don't need the full partition image since the one already on mine should suffice. I'm also unsure of my system's Windows 8 Product Key, where can I get that if/when I do need to reinstall Windows?
    Thanks for any help, it's greatly appreciated.

    First and foremost, good luck: 
    Method 1:
    Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
    Click the 'Advanced Options' button
    Open cmd and type:
    bootrec /fixMBR
    bootrec /Fixboot
    bootrec /rebuildBCD
    and also
    chkdsk /r c:
    chkdsk /r d:
    Method 2:
    https://www.youtube.com/watch?v=iNKEsOF7e4M
    Method 3 (copied from a youtube comment):
    1. Turn on the computer. 
    2.  Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
    3.  Click the 'Advanced Options' button
    4.  Click the 'Troubleshoot' button
    5.  Click the 'Advanced options' button
    6.  Click the 'Startup Settings' button
    7.  Wait for the system to reboot into the 'Startup Settings' menu (is the same menu for safe mode)
    8.  Select the 'Disable early launch anti-malware protection' option. (Press '8')
    9.  If this worked for you, you should now boot into windows.
    10. Now you can shutdown your system and it should hopefully work first time the next time you start the system.

  • Satellite C850 stuck in automatic repair loop

    Hey Everyone,
    So I have a issue that really causng me problems.
    Many times, my laptop goes to the blue screen of death and restarts.
    This time, it randomly said "your PC did not start correctly" shut down and went directly to automatic repair.
    Now, Im not able to get it to start properly. It keeps restarting and every time it goes to options such as doing system recovery, start-up repair, start-up setting, restarting etc. it just keeps looping with no way out. The problem is, my laptop is telling me I don't have an administrator account on it so I am unable to do any of the advanced options.
    I really need to get my computer to work because I have files on it  that I need. recovering those files is my number 1 priority.
    Please, help. I would realy appreciate it.
    Thanks

    Ok so in the first picture 
    it shows what happens when i click system restore. What its displaying there is, i have no administrator account. So at the bottom it displays "Forgot your password or dont see your account?" I click on that to see if i can find my account,  instead it tell me to restart (as you can see in the second picture)
    which just loops and brings me back to the beginning.
     In the third picture
    it shows what happens when i click Command Prompt. What its displaying there is, i have no administrator account. So at the bottom it displays "Forgot your password or dont see your account?" I click on that to see if i can find my account,  instead it tell me to restart (as you can see in the fourth picture)
    which just loops and brings me back to the beginning. So both System restore and command prompt just loop after being clicked.
    Then there is Start-up Setting. Here when i click it, it displays the options shown in picture 5.
    Then after clicking any of the f1 threw f10 options it restarts and goes back to the beginning.
    Any more questions feel free to ask. If you still dont understand i shall try to make a video.

  • Lenovo G505s windows 8, preparing automatic repair then black screen

    Hi,
    Since a few months I have a lenovo G595s with Windows 8 installed, the thing is I don't know much over computers, but last tuesday I was just working and my laptop was next to me without any task, and somehow when I was going to reuse the computer I wasn't able because the screen where all the apps are was frozen, so I tried with CTR ALT DELETE nothing happened, then I just turn it off, and since it only goes on with the Lenovo logo, in the under part says or appears Preparing automatic repair and like 1 min later it goes completely in black without turning off.
    I tried el the F keys at the beggining of the start, in the middle, with a windows CD as well, but I just don't get access to the BIOS or any other configuration, only black screen, doesn't matter how long I leave it on.
    If somebody could help me to find out what is happening with the computer.
    Thank you a lot

    hi Dlskmalpik,
    Welcome to the Lenovo Forums.
    Automatic Repair usually kicks in if there's a problem loading up the files that's required to start Windows. If the repair was interrupted and the screen just goes into a black screen then there's most likely a hardware component that's malfunctioning.
    To check, try to:
    1.Boot into the BIOS by pressing the OneKey Recovery button
      - Link to picture
    If successful, set the following settings in the BIOS:
    Security Tab:
    Secure Boot = Disabled
    Boot Tab:
    UEFI = Disabled or Legacy
    Boot Mode = Legacy
    Boot Priority = Legacy First
    Exit Tab
    OS Optimized Defaults = Other OS or Disabled
    When done, press F10 (or Fn+10) to save and exit and try to boot from your Windows CD (i'm assumming this is a Windows 8 disc).
    2. If you're successful in booting from the Windows 8 Disc, see Step 1 to Step 2 of this guide on how to proceed in fixing the issue.
    3. If the problem remains, consider re-instaling Windows by pressing the OneKey Recovery button and choose System Recovery
      - Link to picture
    In an event that the recovery fails, I recommend you contact lenovo and report the issue as you may need to send the unit for service..
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows 7 failure to reload after recent hard disk replacement

    I have just had my hard disk replaced under the recent Apple program.  It was partitioned running Mac one side and Windows 7 through Bootcamp Windows on the other.
    Time machine restored my Mac partition but I am unable to load Windows 7 on the Bootcamp partition.  I have attempted the process four times and each time it fails at the "completing installation " phase.
    After a couple of restarts, the screen goes blank and the computer just hangs.
    Windows 7 installed and ran perfectly up to the point of my hard disk replacement.
    Anyone else have this problem.  Any ideas as to the cause?

    guess what, all fixed, the safari app installed by apple on new hard drive was 5 something, but 6.02 was needed, i installed 6.02 but it told me i needed OSX10.8.2 which cost me £13.99 but it now works.
    happy days

  • Finder window size reverts to default after restart

    My Finder window doesn't remember the last size I set it to after a restart.
    Mountain Lion was a downgrade - there are many things about Snow Leopard that were better...but Jaguar was the best.  Powerbook G4 was pure freedom all the way through Tiger.
    #googlingLinuxDistros

    For rants: File a bug report with Apple.
    For the Finder window issue, it appears that all of you .DS_Store files are corrupted. Step one is to remove them all.  To delete the .DS_Store files, run this in the Terminal app:
    sudo find / -name ".DS_Store"  -exec rm {} \;</
    At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key. When the default prompt, usually the $ sign, pops up, quit the Terminal app, restart, and open a Finder window, set it up the way you want, and click on Use as Defaults. All subsequently opened or created folders should retain that view. Do note that that only applies to icon and list view.

  • Browsers slow to load after restart

    Both Safari and Firefox can take up to 4 min to open and load a page when first started after boot up, after that they don't have a problem and everything's full speed. However AIM has no problems loading or connecting. This happens whether I go wirless or wired, and happens at some of my friends houses as well, though not everywhere. Is there just poor compatibility with some routers? Apple took me through every setting on the computer to no avail, is there anything on the router side I should change?

    You might try updating your routers firmware, also it might help if you have your browser app start on login. If you right click the app in the dock the open on login option is available.
    There was a discussion on this forum on how in windows, some apps are already running in the background at login unlike OS X.
    good luck...

  • Windows 7 won't load after installing new Hard Drive and Recovery software

    HP G72 Notebook PC
    xz218UAR
    I guess a virus crashed my hard drive so I bought a new one.  I installed the new drive and loaded the recovery disks that I also bought from HP.  Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS.  I've tried starting over from Disk 1 but it's not doing anything different to fix it.  
    I removed the new hard drive and reinstalled it but it's still doing the same thing.  
    What am I doing wrong and HOW DO I FIX IT?

    Hi,
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
    If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Failure to boot after restarting, no distinct pattern.

    My Mac Pro has an issue where every third or fourth restart the mac will fail to boot, needing me to hold the power button until it turns off.
    I get the grey apple and the spinning progress wheel for 30 seconds, then the screen stays grey and the apple is replaced by what looks like a circle with a diagonal bar through it. I believe this means something along the lines of 'No Bootable Directory Found'.
    Before the 10.5.2 update this happened almost every restart. I'm using a Samsung Spinpoint 750gig drive as my boot drive, and the stock 500gig drive as a media disk.
    I have tried several solutions. Repair permissions, Disk Utility from CD and run verify and repair disk, AHT extensive, TechTool Deluxe with surface scan, Format and Reinstall (twice), Memtest, NVRam.
    Could the Samsung drive be bad even though I can't get any software to find a fault?

    Here is a console log of the most recent failure to boot. The events here are a restart, a failure to boot, a forced off and a power on. Hopefully this helps.
    27/02/2008 02:31:00 com.apple.launchd[68] (0x10a650.Locum[2615]) Exited: Terminated
    27/02/2008 02:31:57 com.apple.launchd[68] ([0x0-0xa00a].com.apple.dock[94]) Stray process with PGID equal to this dead job: PID 2586 PPID 1 DashboardClient
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: requested event type: wakepoweron
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein: 0 entries in power event schedule table
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested event type: wakepoweron
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein: 1 entries in power event schedule table
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * date: 02/27/08 21:35:00
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * appName: com.elgato.eyetv
    27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * eventType: wakepoweron
    27/02/2008 02:32:07 com.apple.loginwindow[23] Shutdown NOW!
    27/02/2008 02:32:07 com.apple.loginwindow[23] System shutdown time has arrived
    27/02/2008 02:32:07 com.apple.SystemStarter[16] Starting Aladdin USB daemon
    27/02/2008 02:32:08 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
    27/02/2008 02:34:04 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    27/02/2008 02:34:04 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    27/02/2008 02:34:04 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    27/02/2008 02:34:04 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    27/02/2008 02:34:22 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
    27/02/2008 02:34:23 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
    27/02/2008 02:34:23 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
    27/02/2008 02:34:23 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
    27/02/2008 02:34:23 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    27/02/2008 02:34:23 com.apple.launchd[69] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
    27/02/2008 02:34:24 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
    27/02/2008 02:34:31 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
    27/02/2008 02:34:33 com.apple.SystemStarter[16] Starting Aladdin USB daemon
    27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested event type: wakepoweron
    27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
    27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
    27/02/2008 02:38:49 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 0 entries in power event schedule table
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested event type: wakepoweron
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 0 entries in power event schedule table
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested event type: wakepoweron
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 1 entries in power event schedule table
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * date: 02/27/08 21:35:00
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * appName: com.elgato.eyetv
    27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * eventType: wakepoweron
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested event type: wakepoweron
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 0 entries in power event schedule table
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested event type: wakepoweron
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 1 entries in power event schedule table
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * date: 02/27/08 21:35:00
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * appName: com.elgato.eyetv
    27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * eventType: wakepoweron
    27/02/2008 02:39:48 com.apple.loginwindow[23] Shutdown NOW!
    27/02/2008 02:39:48 com.apple.loginwindow[23] System shutdown time has arrived
    27/02/2008 02:39:48 com.apple.SystemStarter[16] Starting Aladdin USB daemon
    27/02/2008 02:39:48 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
    27/02/2008 02:40:11 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    27/02/2008 02:40:11 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    27/02/2008 02:40:11 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    27/02/2008 02:40:11 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    27/02/2008 02:40:30 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
    27/02/2008 02:40:30 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
    27/02/2008 02:40:30 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
    27/02/2008 02:40:30 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
    27/02/2008 02:40:30 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    27/02/2008 02:40:30 Dock[97] _DESCRegisterDockExtraClient failed 268435459
    27/02/2008 02:40:31 com.apple.launchd[69] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
    27/02/2008 02:40:31 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
    27/02/2008 02:40:37 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
    27/02/2008 02:40:40 com.apple.SystemStarter[16] Starting Aladdin USB daemon
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested event type: wakepoweron
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 0 entries in power event schedule table
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested event type: wakepoweron
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 1 entries in power event schedule table
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * date: 02/27/08 21:35:00
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * appName: com.elgato.eyetv
    27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * eventType: wakepoweron
    27/02/2008 02:40:45 com.apple.loginwindow[23] Shutdown NOW!
    27/02/2008 02:40:45 com.apple.loginwindow[23] System shutdown time has arrived
    27/02/2008 02:40:45 com.apple.SystemStarter[16] Starting Aladdin USB daemon
    27/02/2008 02:40:45 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
    27/02/2008 04:06:51 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    27/02/2008 04:06:51 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    27/02/2008 04:06:51 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    27/02/2008 04:06:51 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    27/02/2008 04:07:07 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
    27/02/2008 04:07:07 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
    27/02/2008 04:07:07 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
    27/02/2008 04:07:07 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
    27/02/2008 04:07:07 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    27/02/2008 04:07:07 Dock[96] _DESCRegisterDockExtraClient failed 268435459
    27/02/2008 04:07:08 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
    27/02/2008 04:07:08 com.apple.launchd[73] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
    27/02/2008 04:07:15 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
    27/02/2008 04:07:18 com.apple.SystemStarter[16] Starting Aladdin USB daemon

  • Windows 8 settings get reset after Restart of computer

     My windows 8 has a problem that whenever I make any changes in the settings in Task-bar or start up or desktop personalize the settings come to effect as normal but when I restart my computer some of the settings are reset to default. For eg. If I
    try to pin a program to task bar, it automatically gets removed from task bar when I restart PC next time.
    Is there a problem with my windows settings?
    My windows version is Win 8 Pro
    Please Help
     

    Please repost your query in the more appropriate Windows 8 Community forums here....
    http://answers.microsoft.com/en-us/windows/forum/windows_8
    Noel Paton | Nil Carborundum Illegitemi
    CrashFixPC |
    The Three-toed Sloth
    No - I do not work for Microsoft, or any of its contractors.

  • MAIL failure to load after Lion upgrade - can't migrate data

    I've posted information in a different forum, but I think that thread is dead so I wanted to post a fresh issue.
    Here's the older post: https://discussions.apple.com/message/16615578#16615578
    Bascially, Mail won't migrate my data and it crashes before fully loading.
    Summary from other thread:
    - mail finishes inporting messages but then crashes when it hits the migration stage
    - same issue after a fresh install and as a fully updated version
    - did resert PRAM
    - tried tossing Envelope files
    - tried tossing V folder
    - I tried one work around to test it and it worked, but it's a BAD alternative. I can move my Mail folder out of my library and re-open Mail. This starts with a clean slate. I added my Exchange/IMAP account to test. I'm sure I can import mailboxes one at a time. But I tried moving my signatures and that doesn't work. I may to do this option, but I'm worried that I will lose all the rules I developed over the last 6-7 years (approx?) adn signatures for each account.
    - error log is on the link above
    I would appreciate some help on this issue before I manually add all my emails. I have 140,000 emails in many folders from the last 10 years and it's not something I want to lose or have disorganize (including rules/signatures).
    Partial ERROR LOG (from base install before updates):
    Process:         Mail [351]
    Path:            /Applications/Mail.app/Contents/MacOS/Mail
    Identifier:      com.apple.mail
    Version:         5.0 (1244.2)
    Build Info:      Mail-1244002000000000~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [154]
    Date/Time:       2011-11-03 09:08:18.361 -0400
    OS Version:      Mac OS X 10.7 (11A511s)
    Report Version:  9
    Interval Since Last Report:          2137 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  1991 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      D1F0E8E6-1C64-4F39-AE54-0E3E76A6B599
    Crashed Thread:  2  -[LibraryUpgrader run]  Dispatch queue: com.apple.root.default-overcommit-priority
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000010bd3cfd0
    VM Regions Near 0x10bd3cfd0:
        Stack                  000000010bcba000-000000010bd3c000 [  520K] rw-/rwx SM=COW  thread 1
    --> STACK GUARD            000000010bd3c000-000000010bd3d000 [    4K] ---/rwx SM=NUL  stack guard for thread 2
        Stack                  000000010bd3d000-000000010bdbf000 [  520K] rw-/rwx SM=COW  thread 2
    Application Specific Information:
    objc[351]: garbage collection is OFF

    Problem Solved!
    One of my mailboxes must have been corrupt in the migration phase or have some bad data.
    Here's what I did to fix my Mail:
    - all mail messages loading, but then it crashed during migration. This stage of the installation means that the "Envelope Index" file completes writing and a "V2-Temp.noindex" folder is created. This folder is used to build the mailbox environment.
    - I checked the V2temp folder to see what transfered before crash and found that one of my old IMAP accounts was only halfed transferred in the temp folder.
    - I tossed Envelope Index (and other "Envelope" named files) and V2-Temp.noindex into the trash
    - I tossed the problem IMAP folder in the trash too (well actually to the desktop)
    - I tossed out all the CalDAV crap.
    - I relaunched and the folders, emails, signatures, rules, accounts all migrated properly after the mail databasr was imported to the new folder "V2"!
    - A "Mail Lost+Found" folder was also created that I havent investigated yet.
    Coming up next:
    - a full backup of Mail!

  • Satellite L635-10P - Stuck with system repair and blue screen

    Help!
    I have a satellite L635-10p with Windows 7. Windows does not load, getting blue screen after the 4 colorful glow bug, windows icon. Safe mode also resulting in blue screen
    System repair is stuck in a black screen with movable cursor (white arrow).
    Do not have recovery disk. misplaced it. lost.
    please advise:
    1. how I may get the data, document files from the desktop?
    2. how to fix this?
    thanx

    Hi there,
    If you don't have Windows DVD then i advise you to download Ubuntu Live CD. You can run it without installing it, and you can backup you data from there.
    If you have DVD with Windows on it, insert it and wait for it to load. When it loads then hit "Other options" or something like that or maybe "Advanced" and there you will find "Command Prompt" hit it and in the console type "notepad.exe". Why you may ask, well you will get Notepad window and you can browse your hard drive and copy and paste data. If you can't see all files just be sure to select "All Files" in File types. That's the way I backup up my data.
    2. What is the error on the blue screen ? Have you tried to Google for it ?
    Regards Strahinja.

  • Skype loads after every restart

    Hi,
    Every time my macbook restarts, Skype tries to load. Why is that? I do not want that to happen. I have also gone to "System Preference" > "Users and Groups" > "Login Items" and have made "Skype" hidden by checking in the right box. Still Skype tries to load after restart.
    Cheers,

    If you do not want it to automatically load at startup, then select it on the Login Items screen, then click on the "-" sign at the bottom to remove it from your startup apps group.
    GB

Maybe you are looking for