Windows 8 Freezes after last "Lenovo Settings Update" anytime the pointer goes to a corner

After the most recent "Lenovo Settings Update", my Windows 8 freezes for a few minutes (minimum of two) anytime the pointer hits one of the hot corners. The system also freezes for a couple of minutes or less when certain apps are started or the mouse clicks on certain apps. This is a repeatable error. I can restore the system to the setpoint previous to the "Lenovo Settings Update" and everything works fine. re-Install the update and the problem comes back. The system also freezes for 5-10 seconds when an e-mail message comes in and the notification appears. Also happens under other different circumstances but the worst is when the mouse pointer goes to any "Hot Corner". I can reset the system to the last restore point and have everything work fine but anytime I go to "Lenovo Settings", it forces the update which then creates this problem.
Has anyone else seen this issue? I have all the updates for Windows 8 and Lenovo installed including all new Bios updates that are published. The model is a Lenovo ThinkPad Edge S320u (otherwise known as the "Twist". The error is repeatable in all screen modes, tablet modes and multiple monitor modes.
For now I will go back to the latest restore point but would like to see the issue resolved.
Thanks.
Bob

I had the exact same issue with the same computer (Thinkpad Twist)! Am very happy to have come accross this page through a web search.
After installing some updates through Lenovo Update App (because of a message that critical updates are available on the Lenovo Support App from Startscreen), my whole system would freeze for about two minutes when moving the cursor over any corner. This is very troublesome not only because it effectively disables the Windows 8 "hot corners" (which I didn't use much anyway, preferring to launch the tasks thus accessible differently), but mostly because it is necessary at times to access the corners, notably to close any document, webpage or other instance of any program that was open in full screen (which usually all of my docs/programs are, considering the Twist's small screensize...).
Afer reading rbagnall's post I first tried uninstalling updates through the Lenovo Update center. But there, once installed, updates don't seem to be removable. Why Lenovo? You can look at the list of installed updates but not make any change. Now I have followed rbagnall's advice and restored my computer with a restore point, sufficiently far back, as I didn't know exactly which update caused this. It worked! Not exactly pleasant, because I had to reinstall some programs and change some settings again, but the problem got resolved.
I went further and tried to see which update causes this by installing them one by one and seeing when the problem appears. The culprit seems to be "Display Mode Orientation Update for Windows 8". One needs to install the "Lenovo Power Management Driver" with it (which is actually listed under optional updates, whereas the Display Mode update is shown as a critical one, but the former is selected automatically when the later is chosen, and one cannot unselect it, a message appears then that it is necessary for the other update). So it could be that one as well (haven't checked whether installing it without the Display Mode update creates the same problem). In any case, once these are installed, the problem appears.
I have now restored my PC again to the restore point, and haven't installed any Lenovo update, not even the other critical one, as I don't know what it's for (Critical patch to fix TVSU UTS issue - I haven't had this issue, and any web entries on this I found dated back to 2009). In the optional updates there is also a BIOS update, which I had installed previously, but I don't know what it's for either. If there is anything terribly useful in either (or other optional updates), please tell me.
For now I have uninstalled the Lenovo Support Startscreen App (which seems to be more annoying than helpful), and will refrain from updating any Lenovo drivers from now, which seems to do more harm than good (everything was working fine before the update)...

Similar Messages

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

Itunes freeze after 10.9.3 update...

itunes freeze after 10.9.3 update...
it seems looking for the store and then freeze...
anyone else? suggestion?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

HT3669 after last HP printer update, my hp laserjet 1300 won't print but instead crashes the programs

after last HP printer update, my hp business 2800 won't print but instead crashes all programs. OS 10.6.8.

Use this driver:
http://support.apple.com/kb/DL907

I cannot play videos anymore after last adobe flash update

I cannot play videos anymore after the last adobe flash update. The screen shows "plug-in failure".

What system are you running? There's a problem with current Flash 13 version. You can download an earlier 12 version here: Archived Flash Player versions
OT

Firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything

firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything, plus there is no option to report an error so i cant even get this checked and this seems to be the case on 3 different computers i use all have windows 7 32bit.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

I am have trouble getting music I have already purchased in the past to transfer to my phone after I did an update. The music is there and I can see it but it cannot be played when the music is put on shuffle. It just skips right past it? How do you fix?

I am having trouble.getting music that I have purchased in the past to transfer to my phone after I did recent update on the phone. I can see the music, it is in a lighter font and appears to still be there but will not play. When placed on shuffle it will skip right over this music. I have already paid for this music and have been able to play it at one time but that was before the update. Why can I not listen to this music anymore?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

TS1398 iPad won't recognize wifi password after 7.0.2 update. (The password is correct, but iPad says it's incorrect) How do I fix this?

My iPad won't recognize my wifi password after 7.0.2 update. The password IS correct, but I continue to get the message that the password is incorrect. Any ideas how to fix this?

I have the same problem too on my iPad 3. One thing that sometimes works is if you go to the App Store and put your password in there after a few tries it may work.

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

Every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8, every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ wind

every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8, every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8

I've had the same problem, and sorted it using this:
Run the Boot Camp Assistant in OS X as normal and create a partition when asked, then insert your Windows 7 disc to reboot and begin the process proper.
Windows 7 requires the NTFS file system, so once in the installer just select your new partition (labelled BOOTCAMP), click on Drive options (Advanced) and choose to format it. Then select the newly formatted partition and continue.
Windows 7 will begin installing, and once it gets almost to the bottom of its checklist, it’ll try to reboot. Now, if you leave it here, you’ll get so far and see the black screen. Any further attempts to reboot will bring you to the same dead end.
Instead, restart and press a key to boot from the Windows 7 disc when prompted.
Rather than running the installation again, choose the little option at the bottom to Repair your computer. Decline any suggestions that pop up until you see a list of options with Command Prompt at the bottom. Choose that option.
At the Command Prompt, type DEL C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS to delete the default ATI driver, then close the window and reboot.
This time, Windows should successfully initialise a more appropriate display driver, allowing you into the desktop. From here insert your OS X disc to install the relevant hardware drivers as you normally would, then run Windows update to clear up any leftovers.
Read more: How to install Windows 7 on the new 27in iMac | PC Pro blog http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/#ixzz0tinWW9tn

MBP FREEZES AFTER 10.4.6 UPDATE WITH WINDOWS PARTITION

Just updated software to 10.4.6, and rebooted the computer unattended. It booted on the Windows partition, and worked fine.
Just rebooted in Mac mode, and everything froze.
Had to reinstall the OS, from the original DVD. Did anyone experience the same problem.
I am reluctant now to install the 10.4.6 update.
Thanks for your comments

There always some people on the forum to believe they
are smarter and that others are dummies, and do not
read instructions! That is bad.
I Should have been more specific: the software update
was the Mac OS Intel posted on the Apple website on
May12.
The MBP was up to date before this update, and
everyting was working fine.
Hi Thierry,
I didn't really post to say I was smarter, or you were a dummy. When I read your post, and saw your signature that says you are running 10.4.5, I thought first of all, "how did you do that?" So I posted that that could be a huge problem.
Please don't think I wasn't anything more less than concerned. Noted you have been having issues (as others have) since the security update. There are numerous suggestions in other threads, but I don't know the solution to your situation. For me the update kiled my ability to change font color in Entourage! Hopefuly Apple will post a fix in the form of an update.

My iMac G5 17 inch 1.8Ghz freezes after 10.4.11 Update

Hi, I recently bought a used iMac G5 17 inch 1.8Ghz 2004 model and it was working fine until I updated from 10.4 to 10.4.11 in order to update iTunes and get a decent browser. It freezes either immediately upon startup or within 2 minutes and I have to power off by pressing and holding the power button for 5 seconds. I thought something had gone wrong so I zeroed out and wiped the hard disk and reinstalled 10.4. After I applied the 10.4.11 update, The same thing happened with the freezing etc. My friend told me it could be a bad sector on the hard drive so I bought a new one and while I was at it, I upgraded the ram up to 1GB. I also had it checked for bad caps and found none. When performing the 10.4.11 update, same thing. The iMac runs fine in 10.4 so I see no reason why it doesn't after the update. Does anyone have any idea about whats going on? Thanks

General advice on updating Tiger:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

4th generation ipad freezing after 8.1.3 update

After updating to the latest ios. I've had terrible lag time and it's been freezing up at least twice a day. I'm hoping to avoid a total wipe and I'm not sure if that will mange a difference anyway.

Hello kckids,
Thanks for using Apple Support Communities.
I see from your post that your iPad is having issues with becoming unresponsive since doing a software update. While you may need to restore the iPad to its factory settings, there are some troubleshooting steps prior to that.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H.

Windows freezes after seconders

After signing in windows will let me browse for30 seconds then it freezes up and only the mouse will move but I can't click on anything. Please help

Hi @john-giarritta1 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion with Windows 8.1 freezing after logging in to it. Here is a link to resolving computer freezes.
Did you install new software?
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows 8 Freezes after last "Lenovo Settings Update" anytime the pointer goes to a corner

Similar Messages

Maybe you are looking for