Windows 8 hangs or freezes whenever search for anything

Rebuild the Index
Whenever you try to search for something in windows, its indexing which find the things quickly and brings that to you.If indexing is disabled or corrupt computer won't be able to search and will not present the search results.Windows uses the index to perform very fast searches on your computer.
The index requires almost no maintenance. However, if the index can't find a file that you know exists in an indexed location, you might need to rebuild the index. Rebuilding the index can take several hours, and searches might be incomplete until the index is fully rebuilt.
Go to Control panel and open Indexing Options.
Click the Advanced button at the bottom of the Indexing Options window. This displays a new window titled Advanced Options.
Click the Index Settings tab if it isn’t selected already.
Click the Rebuild button to delete and rebuild the file index.
Click OK to confirm.
For more information on Advance indexing option you can read article on microsoft's website http://windows.microsoft.com/en-in/windows7/change​-advanced-indexing-options
Step 2 will always fix this issue but just in case its not helpful try the next Step 3.
3.Check the Registry Value
Manual Fix 1 
1. Press Windows Key + R to get the run dialogue box.
2. Type "regedit.exe" in the box and hit enter.
3. Using the box on the left, navigate to the following directory:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
4. We need to change a registry called "Start_SearchFiles" to a value of 2. If you are like me, yours is already 2. We need to reset this so what we are going to do it change it to 0, then back to 2.
5. Double-click Start_SearchFiles or right-click and select "Modify" to get the edit box. Change the number under "Value data" to 0 then click "Ok".
6. Repeat step 5, changing the value back to 2.
7. Restart your computer.
Manual Fix 2
Using the above information navigate to the following directory: Read More on http://bookingtohosting.blogspot.com/2015/04/windo​ws-8-hangs-or-freezes-whenever.html

Hi,
Regarding current information we can't say that it related to this exe file.
We need to use Clean boot mode and Safe mode to test the results:
Please first restart the Windows in Clean boot and see if the issue still persists after reboot:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
If the issue still persists in Clean boot mode, please test in Safe mode.
Let me know the results in Safe mode.
If we cannot identify this issue in Clean boot and safe mode, please help to collect the boot trace and let's see what cause this issue:
Windows Performance Toolkit: Simple Boot Logging
http://www.autoitconsulting.com/site/performance/windows-performance-toolkit-simple-boot-logging/
You can upload the etl file from this tool for our research.
Kate Li
TechNet Community Support

Similar Messages

  • When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! No Finder window opens up and the spotlight dropdown menu just shuts! Please help!

    When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! NO Finder window opens up and the spotlight dropdown menu just shuts! Please help!

    I'm having the same problem in other places as well, for example when i downloaded Easyfind right now, clicking the small magnifying glass button on the right of the file name (shown below) would usually open up finder highlighting the file, but now nothing happens when i click on that button!
    Is there a solution for this, as this was a very useful feature which i used ALL the time?

  • My search bar is messed up after update. I want the old drop down menu back. I can't search for anything now. Firefox is absolutely useless to me now.

    Firefox software update appeared. I allowed it to be installed. It screwed up the search bar/box. I use to be able to click on the magnifying glass icon and ALL the search engine options would appear and I could easily chose one. It was easy. Now nothing. I cannot search anything through Firefox. Firefox is useless to me now, which means I have no computer. Do I have to go out and spend another $1000 to get a new computer? This is not right. You should not do this to a person. Not everybody is technically advanced as some of you are. Now I have no means of searching for anything using Firefox. I really liked Firefox. Now your software update messed me all up. So what am I supposed to do???????????????? IE is worthless. Not safe, not secure, can't trust it. Never works right. Can't even print out correctly. Firefox update should not have messed up my computer. I need to make searches and now I can't. I mean it, it really is not right. So, just for you so called brilliant Stanford types, when I click on the magnifying glass icon or the little, inverted triangle, there is nothing. The search bar is blank. Blank, blank, blank. No longer the quick drop down window with all the available search engine selections. Got it? That's why I've repeated myself. Have a real nice day!

    See this KB article to learn how the new Search Bar works - https://support.mozilla.org/en-US/kb/search-bar-add-change-manage-search-engines-firefox
    If you want the old Search Bar scheme back do this.
    Open up '''about:config''' ''(typed in the Location Bar)'' and toggle this preference to '''''false'''''
    '''browser.search.showOneOffButtons'''
    Then restart Firefox.

  • After the update why can't I search for anything?

    I did all updates the system says I need now I can't search for anything.  Every search result has a pop up window "itunes store not available. try again later". been trying for hours.
    after reading the other problems on here I'm afraid to connect my Ipod touch
    what is going on?????

    I updated my iTunes to 10.2.2 this morning and have had various odd things happening. Including strange things with the iTunes Store, and also my Home Sharing bombing out on me. It just occurred to me that I haven't restarted my MackBook in a while, and then I remembered that Software Update didn't ask for a restart after updating iTunes when normally it does.
    Anyway, I retstarted my Macbook, and my iTunes now appears to be behaving itself.  The Store is fine and I have Home Sharing back on my iDevices too.
    I'm sure you've probably done a restart, but maybe like me, you haven't, as to be quite frank, I rarely have to as nothing really goes wrong.
    PAF

  • How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for  anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

    How do i get rid of the pop ups that are constantly popping up on my mac. Everytime i search for  anything on google an ad for mac keeper comes up and every time i access Netflix another stream of ads pop up... Do i have a virus HELPPPPPP

    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Spotlight is not indexing my hard drive? Mail won't search for anything.

    Ok, So I tried the command prompt: "sudo mdutil -E /" and it just tells me that indexing is disabled. I've tried everything I can think of. Any ideas? I can't find a way for spotlight to re-index my hard drive. Also, when I search for anything in mail, nothing will come up. And I have it set to search for everything. Any ideas with that? Help with either problem would be appreciated! thanks.

    Might give a try with Spotless...
    http://www.fixamac.net/software/spot/

  • DeskTop Manager freezes when searching for apps

      Have the most recent 4.6 software installed.  Worked on day 1 with my new Bold, now everytime it searches for Apps, the status bar goes to what looks to be 100% then freezes.  Cannot load anything?  Anyone having this problem?

    Yeah. Check out my post here
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
    Message Edited by jmrmb80 on 11-06-2008 11:32 PM
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Freezes on "Searching for local disks" on boot up

    I installed 10.3 on my G4 recently. Everything worked fine for about a week, and then during boot up the progress bar gets about 75% done and gets stuck on "Searching for local disks". It never moves on. I tried going to disk utility, I get to the first page asking which language to use and I hit english. It moves to the next page, to prepare installation, and it just freezes. I can move the cursor, but nothing will happen. I cannot run disk utility or reinstall. It just stalls at this point. Any ideas?!

    JRH13:
    Try this:
    • Shut down the computer.
    • Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
    • Turn on the computer.
    • Press and hold the Command + Option + P + R keys immediately after the startup chime.
    • Hold keys down until you hear the startup chime for the third time.
    • Release the keys and immediately hold down Shift key to start up in Safe Mode.
    • Log in and empty Trash.
    • Restart normally and log in.
    cornelius

  • Can't search for anything

    I am unable to find any results when I type in something to search for in the middle search bar on the firefox homepage. I think this happened when I installed your latest version on the desktop computer as well.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Firefox crashes suddenly when I search for anything through the Google search bar and on certain websites.

    I have followed all the steps, including updating everything, opening Firefox in safe mode, resetting Firefox.
    The crash occurred the first time every time I tried to access coyotes.nhl.com and now it has started to do it every time I search for something in the Google search bar. It loads the search results but then it just crashes a couple of seconds later.
    Report: bp-a5969e7c-5c15-4f25-bca3-753e02130417

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • How can I remove this awful "Search for anything you want" screen that keeps preventing me from returning to my launcher's home screen?

    I'm a long-time user of Firefox for Android. I love it. However, something very frustrating has been going on recently.
    I have a Galaxy S5 Active ( Physical home button ) and lately, nearly every time I press the home button, I get this extremely irritating screen which displays "Search quickly for anything you want". Sometimes I press the home button over and over and it won't go away. I will press home after reading an SMS, and there it is. It is driving me insane, and there have been times where I have really wanted my phone to work "right now" and that screen pops up and gets in my way.
    This didn't used to exist for me. I really, REALLY don't want to switch to a different browser, but I can't find any info on how to deal with / suppress this new search screen.
    Any way to do this? Or can this issue be addressed if not? I wondered if it had something to do with having an actual home button, as opposed to a capacitive one.
    Thanks for reading.

    Thank you for the reply. I wanted to wait awhile in order to ensure that this corrected the issue. For a brief while, it did! However, it did not take long before the screen began once again hijacking my home button presses. This occurs even with Firefox removed from default applications ( triple-checked ).
    This never happened before version 35.

  • Youtube or AppleTube, can you search for anything or is this censored?

    I just tried to search for a band i heard of, they posted many of there videos on youtube, yet after many attempts the search engine can not find the videos, why is this if i can search on youtube itself and find them?

    You're right about the newly uploaded h.264 content - odd that it isn't available straight away.
    I probably don't "get it" yet, but I'm a bit more interested in it than I was when it was first announced so I may not be a lost cause
    One man's inane comment is another's philosophical observation....or perhaps tongue in cheek sarcasm. Either way I hope it delivers what you want soon as it's obviously bugging you quite a bit - I can fully understand that if you use YouTube regularly then AppleTv doesn't really deliver the same experience you've been accustomed to.
    AC

  • GREP - search for anything except one character

    Trying to figure out if I can say this in GREP or not....
    I want to search for any character that's in a Superscript character style except for registration-mark symbols.  Is there a way to exclude one character from a search?
    Thanks, Phyllis

    Absolutely. Remember the '^' character that indicates 'start of paragraph'? Well ... apparently whoever devised GREP ran out of useful characters, because it's used again in the "exclude" group. It works like this:
    [0-9fuzzy]
    looks for a single character out of the set '0' to '9' (inclusive), 'f', 'u', 'z', or 'y'. Throwing in the hat reverses the query:
    [^0-9fuzzy]
    looks for any old single character except those in the set.
    The Registered mark has a shortcut of its own in the regular Find -- ^r -- so presumably it's "~r" in GREP mode. If not, copy-and-paste one from your text. So your GREP search should be (with Superscript formatting)
    [^~r]
    This marks only the next non-registered character; to find longer strings you can safely use
    [^~r]+
    -- which translates into "any string in superscript, one character or longer, and not containing the Registered mark". Yes, the short version is a bit easier to type.

  • Windows 8.1 desktop Freezes after boot for about 20 seconds

    only the desktop freezes, it refuses to accept clicks on anything then all of the sudden it works fine.
    if I opened an application (like tmp.txt ) I get as many as I clicked on during the freeze period.
    the task bar works during this freeze period, just the desktop is frozen. I can' bring up the task manager during this time.
    this is the only error in the event log. I've tried looking at links for this but NOTHING helps. I don't know what that LiveComm.exe product is but I can't get rid of it and I can't stop it from causing issues.
    The program LiveComm.exe version 17.5.9600.20498 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
     Process ID: 9c0
     Start Time: 01cf8752c9c04e65
     Termination Time: 4294967295
     Application Path: C:\Program Files\WindowsApps\microsoft.windowscommunicationsapps_17.5.9600.20498_x64__8wekyb3d8bbwe\LiveComm.exe
     Report Id: bd37c23b-f346-11e3-bea3-50e54947ce8f
     Faulting package full name: microsoft.windowscommunicationsapps_17.5.9600.20498_x64__8wekyb3d8bbwe
     Faulting package-relative application ID: ppleae38af2e007f4358a809ac99a64a67c1

    Hi,
    Regarding current information we can't say that it related to this exe file.
    We need to use Clean boot mode and Safe mode to test the results:
    Please first restart the Windows in Clean boot and see if the issue still persists after reboot:
    How to perform a clean boot
    http://support.microsoft.com/kb/929135
    If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
    half services.
    If the issue still persists in Clean boot mode, please test in Safe mode.
    Let me know the results in Safe mode.
    If we cannot identify this issue in Clean boot and safe mode, please help to collect the boot trace and let's see what cause this issue:
    Windows Performance Toolkit: Simple Boot Logging
    http://www.autoitconsulting.com/site/performance/windows-performance-toolkit-simple-boot-logging/
    You can upload the etl file from this tool for our research.
    Kate Li
    TechNet Community Support

  • My phone freezes when searching for apps

    When I go to apps it freezes on the screen

    Yeah. Check out my post here
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
    Message Edited by jmrmb80 on 11-06-2008 11:32 PM
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

Maybe you are looking for

  • Error message from labview when trying to set up the DAQ assistant

    I recieve a message from labview when I try to set up the DAQ assistant and select a channel to use. The error I get states "An exception occured within the external code called by a Call Library Node. This might have corrupted LabView's memory. Save

  • Ipad won't sync . Error message 1140

    i connect my ipad to my macbook air and it comes up with this error message. It isn't full and im only asking it to sync apps and photos - no music or film/tv

  • Smart View Question: Data cell have modified.

    Hi all, I've a question on an Hyperion Smar View Alert. I've created a report in excel by using some VBA Macro to create a data to submit. The situation is tha in some cells of the report There is a formula linked to another sheet. All macros work fi

  • CS6 suite - cannot open acrobat to activate it.

    I have the CS5.5 suite and the CS6 Suite. I upgraded from CS5.5 learning edition to CS6 Pro. Now I am trying to print things to a pdf but although everything else is registered - Acrobat keeps saying it is not activated. I went into the AAcrobat fold

  • MacBook Pro will not shut down properly

    MacBook Pro will not shut down properly. Gray screen appears with spinning gear but will not shut down completely.