Windows 8 HP TouchSmart IQ510la Wrong Monitor Detection and TouchScree​n Dosen't Work

Greetings;
Well i've finally managed (trought a complicated and unnecessarily complicated process) to install Windows 8 Pro, and it worked (Not completly im trying to solve so many issues, somebody made a serious mistake when it said Win8 will work well with my TouchSmart) but now one of the many problems i have is that my touch screen dosen't work. Also when i go to Device Manager on Windows 8 the monitor is listed as PnP Generic and that shouldn't be, i have alredy checked on the forums and tryied every solution for these problems, my graphic card drivers are updated, but i haven't been able to download any drivers from HP driver page for my model for Windows 8, so i wished to ask a few questions:
¿Is HP or Windows working on this issues?
¿Is there a solution for this issues? and if yes ¿Where? if no then the question before applies.
¿Is there a work around this? and if yes ¿Where? if no then the first question applies.
Also i think i should provide this
Model: IQ510la
Serial#: {Removed for privacy}
Product#: FK963AA - ABM
Thanks in advance

Here are the specs for your HP TouchSmart IQ510la Desktop Computer. According to the specs, your computer was introduced for sale on or around 31-Jul-2008. Please see the HP document entitled "HP Windows 8 Upgrade - Important Upgrade Information";
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
Also see "HP Windows 8 Upgrade - Important Information Before Upgrading"
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • Windows 8.1 update only hdmi monitor detected 2 dvi monitors undetected

    Updated Windows 8 to 8.1 and have 3 monitors on Geforce 660ti video card. Since update only hdmi monitor detects. Have updated all video card drivers and clean installed multiple times but still same problem. Can unplug hdmi monitor and get nothing. Plug
    it in and that monitor works but nothing on dvi monitors.

    Hi,
    Check whether the monitor is detected by the computer according to this method:
    Go to control panel, then go to hardware and sound, click the display.
    Then click Change display settings at the left panel, just like the picture shown as below, then click Detect.
    There should be all the monitors listed, meanwhile I suggest to go to the official website of your computer motherboard producer and download and install the BIOS version accordingly.
    Regards
    v-yamliu

  • Second monitor detection and resolution issue with iMac

    Hi All,
    long time reader here, got a lot of helpful tips, thanks to all who post!!
    I have a 24" iMac, Intel based, with OSX 10.5.8.
    I bought a Viewsonic 22" monitor to use along side my iMac when using CS4 and I do a lot of photography. Now the problem is that sometimes my iMac recognizes it as VA2213w and other times it see it as VGA monitor. When is sees it as the VGA monitor the resolution changes a bit, even though it has it on its highest setting 1920x1080 @60hz. My tool pallets on the screen are a bit fuzzy, readable but not the best. I'm using a mini dvi to VGA adaptor as the Viewsonic only has a VGA plug. Could this be the issue? As I have read a lot of the problems here and they seem to be all pointing to the adaptor. If so then why does my iMac sometimes see it as VA2213w monitor and then on other times as VGA. I'm doing nothing to the display other than switching on in the morning.
    There doesn't seem to be any consistency! Its driving me mad. I can't seem to get it back to recognize the display as VA2213. I have clicked on detect displays etc etc.
    It was working fine all week and then suddenly last night it went back to seeing it as a VGA monitor only. Any help would be appreciated. I have no cursor issues, just the resolution and monitor detection.
    Regards
    Fergul

    Hi All,
    Well the issue seems to be the cable. I had an older TFT monitor that I was using and when I bought the above viewsonic, I just simply connected it to the existing cable. It wasn't till I was about to send the monitor back for one that had a DVI connection that I decided to use the VGA cable that came with the new monitor. What can I say, there hasn't been an issue since my last post which was a few weeks ago. Even when the iMac goes to sleep and awaken, no probs. Thanks to those that posted, its appreciated!
    So far so good.
    Take care.

  • When i close the window if press pressed next to the closure and returned again press not work

    When i close the window if press pressed next to the closure and returned again press not work

    Please expand upon your question with more detail. You can also post in your native language if English is a difficulty.

  • Windows 10 Caps Lock and Num Lock dosen`t work

    Hi guys,
    I have a problem to report, on asus k52de dosen`t work Light from the Caps and num lock .
    This problem appered yesterday when windows make the last update.
    If anybody is in the same problem like me please answer the solution.
    THX

    I've developed registry settings that both enable the "Filter Keys" feature in the Ease of Access center and use other values for which there are not UI fields to set repeat values to slow things down, but use values a little different
    than those provided by the UI.
    With this registry file the start of auto-repeat is slowed to 440 milliseconds, and the keys repeat at a reasonable rate of something around 30 per second. 
    http://Noel.ProDigitalSoftware.com/ForumPosts/Win10/Win10FastKeyboardRepeatFix.reg
    Here's what's inside the above:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Control Panel\Accessibility\Keyboard Response]
    "Last Valid Wait"=dword:00000000
    "Last Valid Delay"=dword:000003e8
    "Last Valid Repeat"=dword:000001f4
    "Last BounceKey Setting"=dword:00000000
    "Flags"="59"
    "DelayBeforeAcceptance"="0"
    "AutoRepeatRate"="20"
    "AutoRepeatDelay"="440"
    "BounceTime"="0"
    The following registry file disables "Filter Keys" and returns Windows to the default settings.  If you employ the above, after the next build drop I suggest running the following and see if Microsoft has fixed the problem (they've acknowledged
    it and said it will be fixed in a future build).
    http://Noel.ProDigitalSoftware.com/ForumPosts/Win10/Win10KeyboardRepeatReturnToDefault.reg
    The above contains:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Control Panel\Accessibility\Keyboard Response]
    "Last Valid Wait"=dword:00000000
    "Last Valid Delay"=dword:000003e8
    "Last Valid Repeat"=dword:000001f4
    "Last BounceKey Setting"=dword:00000000
    "Flags"="58"
    "DelayBeforeAcceptance"="0"
    "AutoRepeatRate"="500"
    "AutoRepeatDelay"="1000"
    "BounceTime"="0"
    If you're at all skeptical about running downloaded .reg files from other folks (as you should be), I encourage you to use the text yourself or download them and look inside with an editor before running them.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Photoshop 5.5 extended 64bit on windows 8.1 using Dell 4k monitor p2715q and a shrunken menu bar

    Excitement was short lived after activating the 4K monitor and found that the display in Photoshop 5.5 suddenly shrunk. The text on the menu bar is just like a 5 point text and negotiating through the menu was a painful process. How do I increase the menu bar size to be larger.
    One site suggested I change the UI in the preference to 200... but there is no selection of this to be seen in the preference drop down menu. And now PS 5.5 hangs every time I get into the preference area. Should I uninstall the software completely and reinstall it.
    Hope someone can shed some light into this. TQ

    Folks....
    I have found the way to get around this and the answer lies in the display adjustment for text and the icons... under the control panel.
    This adjustment is global and encompass all software not only photoshop. Hence I hope Microsoft will look into this for 4K monitor users especially those with dual monitors with different K's eg: 4K and a 1920 panel.

  • Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

    Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT4437 Why do some of my network apI'm so happy today! I just finished hanging my new Roman Shades in my kitchen! The windows in there had been bare for years and honesps such as global work in AirPlay while others like CTV  I only get the sound not the p

    .

    [url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!

  • Pages always opens a new window on the wrong monitor

    Is there anyway to fix this I don't understand why always open on the wrong monitor I can't seem to open on the correct one

    OS X 10.8.4:
    Drag the window back to the correct monitor and position it where you want it to open. Make certain that you actively save and close your documents before quitting Pages.
    In System Preferences > General, check the box adjacent to Close windows when quitting an application.
    Your Shutdown, Restart, and Logout dialogs should have the “Reopen windows when logging back in” unchecked.
    If this does not correct the problem, select all contents (command+A) of the following folder only, and then use the right button to select the menu item, “Move to Trash.”
    /Users/yourlogin-name/Library/Caches/
    Also, drag the following file to the Trash as well:
    /Users/yourlogin-name/Library/Preferences/com.apple.iWork.Pages.plist
    Empty the Trash. (You may have to reboot to fully empty the Trash.)
    The next time you launch Pages, the application window will open where you want it.

  • Windows 10 elitepad in Dock can not detect VGA monitor

    Windows 10 will not detect my external monitor.  I loaded Winbdow 10 on elitepad 1000 about 2 days ago.  This is the first time I've tried to use my extenal monitor.  My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81.  I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock.  Now tablet can  not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in .  I've run the detect monitor several times.   Any one got a solution.  The new HP support page does not even list tablet as an option for display support. Thank you 

                Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but  accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
              So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

  • Camera Raw window appears in wrong monitor

    About a week ago, the camera raw window started appearing in the secondary monitor of my pair and I cannot stop it from starting there. It appears with the title bar up off the top of the screen and I can just barely grab the top corner of it from the edge of the primary monitor and drag it out where I can move it.
    Prior to this, if I opened a raw file directly into CS3, it would start in the primary where CS3 is placed or if I right clicked a raw file in Bridge and chose open in CR, then it would open in the secondary monitor where Bridge is located. Now I don't get the choice. This was happening before the latest updates which all appear okay. System is a PC by the way.
    I would appreciate any assistance.
    Col

    Okay, here's a lesson for us all. I had accidentally hit the F key (Full screen mode toggle) whilst in there and it fills the screen with no hope of getting to the edges. Once back in normal mode all is well again!!!!! Embarassed
    Thanks for the help
    Col

  • How do I get Windows 8.1, run via Bootcamp, to detect an external HDMI display

    Good afternoon,
    So earlier today, I managed to install Windows 8.1, via Bootcamp, on my 15' MBP retina with Iris pro 5200 integrated graphics (Late 2013). I cannot figure out how to get the dang thing to recognize my TV through an HDMI cable. I did have it kinda sorta working the first time I installed Windows on my MBP with bootcamp, but that installation failed. What do I need to do to fix this problem?
    Summary:
    Using a 15' MBP retina with Iris Pro 5200 graphics. This is not the model with the nvidia graphics card.
    This current installation seems to be working without too many problems.
    Windows 8.1 will not detect my tv, and yes, the HDMI cable is plugged into both the TV and the MBP.
    Why is Windows on my MBP failing? It seems like everything is set up properly.
    (I know I could do some weird combination of Thunderbolt to eventually HDMI, but I have not tried this)
    I simply want to plug an HDMI cable into my TV and my MBP.
    I do have a regular windows desktop, and this works without any problems (besides being windows)
    Thanks for any help you guys can offer.

    with my imac it worked as automatically as in OS X my video card is amd though and the monitor is dvi rather then hdmi

  • TouchSmart 610 Touchscree​n is not working (windows 7)

    Hey guys,
    I have had my TouchSmart for about 2 years, and it's been near a year that my touch input hasn't been working, but since I wasn't really using it, I never followed up until last week. But I was pretty upset when I realized I had a 2 year warranty which was just expired on 02/02/14. I have tried all be basic things that has been suggested on this site or any other sites, such as running Windows update (and yes I installed the optional updates as well). I have also checked and updated all the drivers, and at this point is running out of options. I have a bit of IT experience so I think I know what I'm doing but I'm running out of ideas.      Any suggesstions?
    HP TouchSmart 610-1100z CTO Desktop PC
    Windows 7 Home Premuim - Service Pack 1
    Product no: QB912AV
    Everything in Device Manager seems normal (no warning signs)
    Thank you for help in advance

    Hello ShawnShamlou,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your t ouch screen on your HP TouchSmart 610-1280qd CTO Desktop PC is not working and you are now out of warranty. I am providing you with an HP Support document: Troubleshooting Touch Screen Issues in Windows 7 that will give you troubleshooting steps to help you resolve this issue. I would focus my attention on the subject "Pressing the touch screen does not do anything" as that is the section that applies to your issue.
    Please re-post with the results of this document. Thank you for bringing your issue to the HP Forums. Enjoy the rest of your day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • How do I stop Firefox from claiming to have sessionrestore errors or opening the wrong session items and/or remember the wrong window size and/or position.

    Since automatically updating to version 25 Firefox is randomly opening recent tabs and windows from the browsing history, and/or randomly positioning the browser window from history.
    Currently using Firefox 25.0.1 on Windows Vista and Windows 7. Problems started immediately after automatic updates to 25.0.0. Problems are most noticeable on the Vista box because it has so much screen geography (the Windows 7 box is a laptop).
    Problems include:
    Firefox may open the correct tabs into a properly sized and positioned window, without problem. (Not a problem, included for completeness since it does, occasionally, work without error).
    Firefox open a single empty tab (about:blank, my Home page). (Listed as a problem because Firefox simply forgot the tab which was open.)
    Firefox may claim it cannot open the correct tabs and pop up about:sessionrestore. Proceeding will open all tabs (usually only one or two for me). This gives the impression Firefox did not actually have a problem. But, then, often, the tab Firefox is having problems restoring is about:blank so I should hope there was no problem!
    Firefox may open randomly selected recent browsing items, without other problems. This gives the impression that Firefox does not properly record recent history for about:sessionrestore. Checking History appears correct; Firefox simply reached back hours, or days, or even weeks, and restored a random session from long ago.
    Any of the above may occur, but the window position and/or size will be randomly selected from another recent history item. This is most noticeable when the position is on the wrong monitor and can be annoying since Firefox simply "disappears" if (as it often is for me) that other monitor is disconnected or powered off.

    If you use cleanup software like CCleaner then check the settings for the Firefox application.<br />
    Also make sure that your anti-virus software doesn't mess with files in the Firefox profile folder.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Multiple_profile_files_created
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

  • Photoshop CS5 still chooses wrong monitor profile in dual monitor case?

    The folk lore has it that if you go to EDIT/COLOR SETTINGS and open the Working Spaces RGB drop down, then what it says near the top on the "Monitor RGB" line is the monitor profile that photoshop is actually using.
    If that is true, then I would expect that if I run photoshop on my monitor 1 it would show the profile of monitor 1, and if I run PS on monitor 2 it would show the profile of monitor 2. But in fact, it always shows the profile of monitor 1. Naturally, this creates anxiety that PS is using the wrong profile to display my images, since I normally run with the image on monitor 2.
    My setup: Windows 7 64-bit, PS 12.0.1 x64. Matrox M9120 graphics card driving two monitors. Windows CONTROL PANEL/COLOR MANAGEMENT shows a different profile active on each monitor.
    (By running photoshop on a particular monitor, I mean I run photoshop, drag it in non-full screen mode to the desired monitor, and close it. Then I run it again and it starts on that monitor (including the splash screen).)

    PeterFacey wrote:
    Emil, Sorry, I disagree. It relates entirely to how Photoshop handles profiles, not how the operating system does.
    Windows operating system doesn't handle color profiles at all, but it provides all programs that do with the same way to handle them. If you have the color profiles of your monitors installed properly in the system, they will be equally available to all programs. If a program can use properly one color profile for one monitor it will do the same with more.
    PeterFacey wrote:
    I also have CorelDraw which is a colour managed application. If I set that straddling two monitors, do you think it will use the appropriate monitor profile for each half? I don't know, ...
    I don't have CorelDraw and don't know if it is color managed, but if it is and if the color management on your system is working properly it should give you the same result as Photoshop. Just go ahead and check it - open the same image in Photoshop and in CorelDraw and make a screen capture then measure the RGB values in Photoshop or any program that displays the RGB numbers of colors. But have in mind that a screen capture from multiple monitors that share the desktop will capture the entire shared desktop on one image (if monitors are different sizes it will leave blank areas around the smaller one depending on the alignment), but the same colors will be the same on the entire screen capture using the effect from the color profile only of your main monitor. So if you want to measure how the other monitor displays the RGB color values of the same color, you have to change it  to your main monitor in your system in order to have the screen capture with the effect of that monitor's color profile.
    On my computer using Windows 7, all color managed programs show the same colors on one or more monitors. Along with the color managed programs from Adobe like Photoshop, Illustrator, InDesign, and AfterEffects, the other color managed programs like Windows Explorer, Windows Media Player, Firefox, QuickTime, etc also show the same RGB values of a color from each program on a certain monitor.
    Basically, if the color management is working properly, the same color displayed from all color managed programs should look the same or as close as possible on each monitor, but when you capture the screen and measure the RGB values they should be different on each monitor unless the monitors are physically identical which is unreal.

Maybe you are looking for