Windows 8 installation of VPN Client Software (x86 64-bit version) results in "Icon09DB8A851.exe" on startup task

I've just installed a VPN Client Software for x86 64-bit version of Vista and Windows 7 (vpnclient-winx64-msi-5.0.07.0440-k9.exe) to Windows 8.  It's working without problem except that it seems to add an entry "c:\Windows\Installer\{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D}\Icon09DB8A851.exe" onto startup task. I suspect the installer program (InstallShield) is not working properly.  I'd like to know if anyone has same issue or my computer got infected in malware.

Hi I have installed and config to my client a ASA 5515 and everything is fine but. When I config L2TP/IPSEC VPN for the remote work bang I have a problem. When I config L2TP/IPSEC VPN to Windows 7 with native client on Windows everything is fine, but in Windows 8.1 is bad on 1 hour after VPN connection Windows 8.1 tries to renegotiate the connection and something happens and the connection is disconnected.
LOG:
5
Feb 14   2014
14:53:07
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x869df107, Outbound SPI = 0xfb02e574
4
Feb 14   2014
16:41:08
113019
Group =   DefaultRAGroup, Username = s.choraliev, IP = XXX.XXX.XXX.XXX, Session disconnected. Session   Type: L2TPOverIPsecOverNatT, Duration: 1h:48m:01s, Bytes xmt: 29765217, Bytes   rcv: 9633270, Reason: L2TP initiated
5
Feb 14   2014
16:41:09
713119
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 1 COMPLETED
6
Feb 14   2014
16:41:09
602303
IPSEC: An   outbound remote access SA (SPI= 0x805CA50C) between XXX.XXX.XXX.XXX and XXX.XXX.XXX.XXX (user= DefaultRAGroup) has been   created.
5
Feb 14   2014
16:41:09
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x9a7f5ac6, Outbound SPI = 0x805ca50c
5
Feb 14   2014
16:41:09
713120
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 2 COMPLETED   (msgid=00000001)
And the VPN session is stack.

Similar Messages

  • Unable to do BPC for Office Installation via BPC Client software

    Hi,
    I am trying to install "BPC for Office Installation" via the client software center. I get an error "You do not have authority to install the BPC for Office.".
    I am on Windows 7 Home premium. My username is the only name on the computer and has admin rights.
    I did browse through a few threads in this forum and as per the suggestions, I installed .NET 1.1 and service pack for it.
    I also modified the "hosts" file in system32\drivers\etc to include the lines I need.
    IT STILL DOESNT WORK !
    PLEASE HELP!
    Regards,
    Tagz

    Thanks for your response Patrick!
    I enable the Intranet option as per the note and added the website to my zone in the browser security option.
    I get case 2 error as per the note. I tried going to the next step. Now it says "Not enough memory. A minimum of 64 MB of memory is required.". My computer though has 4GB memory.
    Please advice!
    Thanks,
    Tagz

  • Can't connect to Easy VPN Server using Windows 7 inbuilt VPN client

    Hi Everyone,
    I would like your help to resolve a vpn issue I am having with my Windows 7 inbuilt vpn client. I am trying to connect to an Easy vpn server on a Cisco 2951 ISR G2. Well, I can connect using Cisco vpn client v5.07 but I can't connect using Windows 7 inbuilt vpn client. Is there any configuration that I am missing so that I can connect using Windows 7 inbuilt vpn client to connect to the vpn server?
    Thank you.

    Hi MindaugasKa,
    Base on your description, your case must is the NPS client can’t pass the NPS policy.
    The NPS client can’t connect the network may have many reason, such as the Network Access Protection Agent service not started successful, the certificate not issued properly,
    please offer us information when your Windows 7 client denied, such as event id, original error information, screenshot.
    More information:
    Extensible Authentication Protocol (EAP) Settings for Network Access
    http://technet.microsoft.com/en-us/library/hh945104.aspx
    Network Access Protection in NPS
    http://msdn.microsoft.com/en-us/library/cc754378.aspx
    Appendix A: NAP Requirements
    http://technet.microsoft.com/en-us/library/dd125301(v=ws.10).aspx
    802.1X Authenticated Wireless Access Overview
    http://technet.microsoft.com/en-us/library/hh994700.aspx
    Connecting to Wireless Networks with Windows 7
    http://technet.microsoft.com/library/ff802404.aspx
    The related thread:
    NPS 2012 rejects windows 7 clients after upgrade from 2008 R2. Requested EAP methods not available
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/44af171f-6155-4f2e-b6c7-f89a2d755908/nps-2012-rejects-windows-7-clients-after-upgrade-from-2008-r2-requested-eap-methods-not-available?forum=winserverNAP
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error occurs during installation of VPN client

    Dear all,
    During the installation of the VPN client, it prompt an error: "Installation failed. rc=2148467203".
    Anybody facing this problem before, please help.
    thank you.

    Hi ,
    what type of error message you are getting while installation of VPN client.Is it "Installation failed. rc=2148467203" or ""Deterministic Network Enhancer Installation failed rc=2148467203"".Could you please more specific about the error.
    Try to reinstall OS and then install VPN client.

  • Unable to install photoshop elements 13 on new computer.  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    Unable to install photoshop elements 13 on new computer (Windows 8.1 OS).  Error message is:  This installer does not support installation on a 64-Bit windows operating system.  Please download the 64-Bit version of photoshop elements.  How do I do this?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Is there an Oracle VPN client for Linux (64-bit) ?

    Does anyone know if there is an Oracle VPN client for Linux (64-bit) ?
    Where to get it ?
    How to install it ?
    thanks!
    Greg

    Perhaps OpenVPN will work for you. Unfortunately you did not provide any OS information and VPN requirements.
    You can find help to install and setup OpenVPN in Google. You might want to check the Fedora EPEL repository http://fedoraproject.org/wiki/EPEL to install the software using standard yum in Enterprise Linux.

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    download the 64bit installer,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Windows 8 Cisco VPN Client Issue

    I connect to several of my customers with the Cisco VPN Client Version 5.0.07.0290 and all has been working fine. In the last week, virtually every Windows 8 machine has stopped working. The client connects fine, shows it's connected, but if I go to Status -> Statistics it just shows 0 in the Bytes Received and Sent. The Bypassed and Discarded increases, but I am unable to reach any system. Does anyone know what causes this or how to resolve it? This is a HUGE problem for me as all of the work we do for our customers is via their VPNs. Every non-Windows 8 PC still works fine. And these Windows 8 PCs have been working fine until just the last week. Browsing through, I've seen posts with this same issue, but none related to Windows 8 recently. They are all Windows 7, and my Windows 7 machines are working flawlessly.
    Someone help!
    Thanks,
    Brian

    Hi Brian,
    IPSEC client on Windows 8 machine is not supported.
    Cisco VPN Client 5.0.07 supports the following Microsoft OSs:
    •Windows 7 on x64 (64-bit)
    •Windows 7 on x86 (32-bit) only
    •Windows Vista on both x86 (32-bit) and x64
    •Windows XP on x86
    VPN Client does not support the Tablet PC 2004/2005; and Windows 2000, NT, 98, and ME.
    VPN Client supports smart card authentication on Windows 7, Vista, and  XP. However, VPN Client does not support the ST Microelectronics smart  card Model ST23YL80, and smart cards from the same family.
    VPN Client supports up to one Ethernet adapter and one PPP adapter. It  does not support the establishment of a VPN connection over a tethered  link.
    VPN Client 5.0.x is incompatible with the combination of Cisco Unified  Video Advantage 2.1.2 and McAfee HIPS Patch 4 Build 688. To avoid system  failures, uninstall either of these two applications, upgrade McAfee to  the latest version, or use VPN Client 4.6.x.
    To install the VPN Client, you need
    •Pentium®-class processor or greater
    •Microsoft TCP/IP installed. (Confirm via Start > Settings > Control Panel > Network > Protocols or Configuration.)
    •50 MB hard disk space.
    •128 MB RAM
    (256 MB recommended)
    •Administrator privileges
    The VPN Client supports the following Cisco VPN devices:
    •Cisco Series 5500 Adaptive Security Appliance, Version 7.0 or later.
    •Cisco VPN 3000 Series Concentrator, Version 3.0 or later.
    •Cisco PIX Firewall, Version 6.2.2(122) or Version 6.3(1).
    •Cisco IOS Routers, Version 12.2(8)T or later.
    you can get more information from following link:-
    http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537
    Regards,
    Naresh

  • Phonefactor with RRAS(Windows Server 2003) - VPN client timeout after 20 seconds -- too fast!

    [Note that I have previously posted this question on Experts Exchange... but have not found a solution yet].
    We are a small business and would like to switch to two-factor authentication for VPN connections. We spent nearly a year helping Barracuda debug their small business VPN appliance and finally they took their boxes back and gave us back our money - they
    just couldn't get file sharing to work consistently with some new firmware they had to install due to a patent case.
    So... now we are trying Phonefactor.
    Our VPN setup is RRAS on a Windows Server 2003 domain controller.
    We have installed Phonefactor, enabled it as a Radius server, and configured RRAS to point to Phonefactor for Radius authentication. We configured phonefactor to send text messages for authentication, as we figured that would be less disruptive than a phone
    call.
    It all works except... the timeout for VPN clients is only 20 seconds! By the time we receive the text message on a cell phone, sometimes there is only 5 or 6 seconds to get the six digit code typed into a reply on the cell phone... and unless we are really
    nimble, that is frequently not enough time!
    When the VPN client times out, it gives an Error 718 "The connection was terminated because the remote computer did not respond in a timely manner."
    How can we increase the timeout on the VPN clients, so we can more reliably enter the authentication code in a reply back to phonefactor?
    Things we have tried:
    1) Connecting (PPTP) from different Windows clients to see if we get different timeout limits. So far we have tried several Windows 7 boxes and a Windows Server 2003 as the client, but in all cases the timeout is 20 seconds.
    2) On the windows clients: Searching through the PPTP client settings to see if there is one labeled "connection timeout". So far we have found nothing.
    3) On the windows 2003 server: Modifying the RRAS Radius Server time-out to be 30 seconds, 60 seconds, 300 seconds. We've tried restarting RRAS after these changes, but the client connection timeout is still 20 seconds.
    4) In the phonefactor configuration: Searching through the radius server settings to see if there is one labeled "connection timeout". So far we have found nothing.
    5) Using NTRadPing to connect directly to the phonefactor radius server. With NTRadPing we were able to wait more than 60 seconds without a timeout from phonefactor. So we don't *think* at this point that the issue is within phonefactor.
    6) We have asked phonefactor support, but their response is "hmmm... good question, we don't know, that sounds like a problem with your vpn client". And they could well be correct.
    7) Search the web for how to increase either the stock windows VPN client timeout, or the RRAS radius authentication timeout. No luck so far.
    8) Try this registry hack:
    http://windowsitpro.com/networking/solving-ras-718-error. Didn't help.
    Any ideas?
    thanks!

    Hi fdc2005,
    Thanks for the post.
    However, generally, we first type User Name, Password, then click connect to establish the VPN connection. Such as:
    Therefore, I have a little confusion about the timeout you mentioned. Would you please provide us more details.
    Regarding error 718, please check if the following could help:
    If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting MS-CHAPv2.
    Steps to follow for resolution:
    (1) Check if the Routing and Remote Access Server (RRAS) is configured to allow connections with MS-CHAPv2
    (2) Check if the RADIUS server policy supports MSCHAPv2 (This step is needed if you control access to clients using Remote Access Policies on the IAS/NPS server)
    Quote from:
    Troubleshooting Vista VPN problems.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • VPN Client and Vista 64-bit

    We have several laptops that we need to install Vista on. We would prefer 64-bit so that we can really make use of the extra RAM these laptops have, however there is one program we require holding us back to 32-bit at the moment. Its the Cisco VPN Client. We have PIX 500 series hardware so we don't have any other VPN option right now.
    All I would need to know is that Cisco does indeed plan to release a Vista 64-bit compatible of the software sometime soon (say in the next quarter).
    Does anyone know if this is planned or not? Or is there some technological barrier keeping them from doing it?

    February 18, 2010
    Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
    In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments. 
    A 64-bit specific compatible image is available for installation on these platforms.
    Please have communicate feedback (both positive and problems) to [email protected]
    Key Capabilities available for Beta Testing:
    New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
    Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
    Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
    Release Notes will be available next week via a link once the download image is selected.

  • Hi Guys I have asked to transfere my creative suite from windows to mac, no problem, I got the serial number, but I have a windows installation disc how to I get the mac version on my mac computer?

    HI Guys I have recently asked to transfer my Windows creative suite to a Mac computer. I received the serial number but unlike my lightroom install disc, which is win and mac, my Creative Suite disc is windows only, how do I go about installing a Mac version of my creative suite onto the Mac computer?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • IPhone not working with Windows 7. Message asks to install 64-bit version

    Full error message; "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes".
    I have just bought my wife a brand new iPhone 32Gb 3S for Christmas & now it's the most expensive paperweight I own. My wife has also just bought me a brand new 16Gb Nano, which also now comes up with error messages when connected, saying that it faild to load and I need to disconnect it & reconnect it. Naturally, this does not work either.
    I'm running Windows 7 & the current 64 bit version of iTunes, but no matter what I do, the above error message comes up.
    I have uninstalled and reinstalled iTunes, very carefully following the exact process & order as detailed by apple, with no luck.
    Everywhere I look, there seems to be references to a piece of software that should exist on my computer; "Apple Mobile Device Application Support", yet this is not to be found anywhere.
    I have spent over 2 hours on the phone with the Apple techies, with no results whatsoever.
    Can ANYONE assist me as I'm going completely bonkers & am about to storm into the Apple store and demand my money back?

    The MSCONFIG workaround requires I-tunes and I-phone code to be installed on the machine. The problem is that I-tunes will not install on XP 64-bit machines. It will install on Vista but NOT XP. MSCONFIG requires the user to allow code that can't be on the machine until it's been installed! Apple staff have confirmed this to me over the phone after I spent half a day trying to figure it out.
    There is an option, which I know some Apple staff are aware of, which has been set up by a Japanese kid and can be found here:
    http://sites.google.com/site/yukichigai/iphonex64
    There are also a couple of 3rd party I-pod readers which, if I name them, will probably get me kicked off the list. Why the f*ck can't Apple sort this out. XP 64 bit has been around for FIVE YEARS!!!

  • With Boot Camp, should I install the 64 bit version of Windows 7 (Home Premium edition) OR the 32 bit version when installing onto an early 2008 Mac Pro operating OSX Lion with a 1 TByte internal HDD?

    With an early 2008 Mac Pro I'm about to add a second internal drive (1 TByte SATA) and initially install OSX Lion onto the new drive.  Then to partition this new HDD via Boot camp.  But my question is whether I am best advised to purchase the 64 bit version of Windows 7 (Home Premium) or the 32 bit version of Windows 7 (Home Premium) for the Windows sector of the disk  What are the differences, and will I notice a difference in performance?

    In chart from wiki, (scroll down to "Comparison chart") check the maximum CPUs supported.
    You don't see this on MSoft's 1st searched for chart hit. This is one reason you will regret not paying for Professional+ if you get Home Premium 64 as I did for Mac Pro early 2008.
    Home Prem Task Mgr sees 4 processors vs. the 8 that are seen by Pro+.    
    Costs more than a Mac upgrade to Lion if you make that mistake. 
    http://en.wikipedia.org/wiki/Windows_7_editions

  • How do I download photoshop elements 13 when I keep getting the following messageThis installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    I need help with downloading photoshop elements 13

    Moved to Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
    Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
    -http://helpx.adobe.com/contact.html?product=photoshop-elements or
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Maybe you are looking for

  • Do not continue until a file exists in powershell

    Hi, I was wondering if there is a method in powershell to get it to  continually check whether a file exists and do not progress until it finds it. i.e DO WHILE   c:\flag.txt NOT EXISTS Wait 10 seconds END <Next command > So that the <next Command> s

  • Nokia e71 New messages not showing in inbox

    I recently updated my nokia e71 with the new software from pc suite, everything went fine but i recieved around 3 messages just after I had restored all my data onto it, I went into the inbox to read them but its showing no new messages. On the messa

  • Re: ICR - Duplicate records in FBICRC003A

    Hi Ralph, It seems that FBICA3 creates duplicate records in FBICRC003A if assigned items were subsequently unassigned. I believe this is due to program error. These are the steps that I went through to get this error: 1) Post cross-company FI documen

  • Giving next / previous a brain?

    Hello; I wrote a next previous nav for editing records on my web site. I also on one of the same pages, have it filtering records by the category. If a user wants to see all the records they can, or if they select from a list on another page, they ge

  • My Systems Preferences window is now a menu??????

    I am accustomed to clicking the Systems Preferences icon on the dock and getting a window with things lined up in rows. Just recently when I click it, it will say "System Preferences, Edit, View, Window, Help" at the top of the screen, and the only w