Windows 8 - Ipod touch fails to start ITunes when plugged in ?

When I plug in my Ipod touch ITunes fails to start even though it is enabled in my IPod touch settings.  It used to always load up Itunes in Windows 7 but I can't figure out what the problem is.
Any ideas ?

Start here:
iOS: Device not recognized in iTunes for Windows
I would start here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Similar Messages

  • "iPod Service Failed to Start" message when upgrading iTunes

    When upgrading iTunes from Version 7 to the newest version, I got an error message stating "Service, 'iPod Service' failed to start. Verify that you have sufficient priviledges to start system services." So I canceled the download and rolled back to Version 7 again. I did notice that now I'm getting an error message when I start up Version 7, stating that it could not start the iPod service. I just bought an ipod Classic and cannot use it without the latest version of iTunes. Any suggestions? Thanks in advance!

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • My ipod doesn't appear on itunes when plugged in my computer?

    My Ipod touch 4g doesn't appear on itunes when plugged in my computer. It doesn't charge on my computer and I can't use itunes with my computer and my ipod. What would be solutions for this problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.

  • Ipod Touch (4th gen) freezes iTunes when sync'd.

    A friend of mine has been having some problems and I have been unable to help him.  He bought a new iPod touch 4th gen at the weekend (couldn't resist the lower price or wait a few weeks until the new model) running ios 6, he has just updated itunes to 10.7 but everytime he syncs it iTunes freezes during part 5 or 6 of the sync process and does not recover.  His old nano (5th gen) syncs without issue, any ideas?  We have tried reseting the iPod to factory setings but this will only allow the iPod to sync correctly once.  When we try again iTunes freezes up.  We are pretty much at a loss, it's taken the shine of his new purchase.
    Thanks.

    From what I can recall they are preparing to or waiting for changes to be applied, I don't have my laptop to hand so I can't check at the mo.  The status bar then does nothing at all, iTunes just freezes up completely.  The moving arrows by the iPod stop circling and we have to use the task manager to close the program, just in case it restarted syncing we left it for about 20 mins without joy.  Even unplugging the ipod makes no difference.

  • How do I restore my iPod Touch that only turns on when plugged into the wall?

    I found my old iPod Touch 4th generation in my backpack, and my backpack went through the wash, (It shouldn't of been too bad since it was in the side pocket) but it goes dead instantly as soon as I take it out of the wall charger, and it does not turn on when I plug it into my computer. It also has a pass, (That I forget) so I need to restore it. Is it possible to restore it without connecting it to a computer?

    No. You have to connect the iPod to a computer with iTunes to restore the iPod.
    Did you throughly dry the iPod before you started try to use it?
    If not try by
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html

  • Why does my ipod touch 5th gen not charge when plugged into my computer? (it keeps stuttering(lightning symbol next to bettery goes on and off literally every second))

    so I have my ipod touch 5th gen connect and the little lightning symbol, next to the battery on the top left, keeps flashing on and off every second. I don't know what to do and also it doesn't show up on iTunes.

    Hey Ed, Try trouble shooting 101. Do you have a different cable and/or charging device? If so, try the different cable first, then a different charging device. If the problem goes away, I'd say it's the cable, replace it. If with in 1 from date of purchase, Apple will replace for free if the cable is found to be defective. If the problem continues with a different cable or a different charging device, then the problem is with your iPod. With a strong light and a magnifying glass look in the iPod's charging port. Your looking for damage in and around the port. Is the port lose? (shouldn't be). Are pieces missing or damaged? Bent or damaged contact pins can do what you describe. Foreign debris, namely pocket lint or corrosion can also cause charging issues. If you see something like lint, try to blow it out, or if you must use a non-conductive probe, I find a round wooden toothpick works well to carefully remove the lint from the bottom of the port. Just be careful to not touch, bend or damage the gold contact pins on the long side of the port. Also make sure the locking pins on the short ends (looks like two silver bumps, one on each end) of the port are free to move. If you find corrosion, try plugging / unplugging about 12 times to clean the contacts off. If you must use a cotton swab cut to fit, with a drop of 91% isopropyl alcohol on it, you want it damp, not wet, then plug it in and out until the swab comes out clean. You will most likely need several swabs. If you find nothing physically wrong, then try resetting your iPod. If that does not work, restore from backup, last resort, make a backup then restore to new, a full factory restore. If issue continues see your Apple store and have it evaluated for a possible hardware issue. But start with a different or new cable. Good luck, Cheers.

  • Why doesn't iPod icon pop up in iTunes when plugged in???

    ^^^^
    How can I have the iPod icon appear on the source menu when I plug it in? I've had the iPod for two months and everytime I plug the iPod into the computer, the icon automatically appears in the source icon and the songs start to update. But I tried today, and no icon at all. I haven't done anything different to the computer either. How can I update my iPod?
    Thanks,
    JayDee

    Look for these programs in Task Manager > Processes tab
    click the box to show processes from all users
    Click on "Image Name" to sort alphabetically
    ItunesHelper.exe - should be running under your account
    iPodService.exe - should be running under SYSTEM account
    iTunes.exe - should be running under your account
    Are they all there?

  • New ipod touch doesn't turn on when plugged in

    i just bought my ipod touch yesterday. when i plugged it into my imac using the usb cable, it doesn't turn on to show that it's charging like my nano does when it's turned off. i had to turn the touch on before i could see the huge green battery icon. is there something wrong with my ipod touch? i read on other forums that it should 'turn on' to show the battery icon charging when i plug in an ipod that's turned off. i can't find any answers to my question elsewhere.
    please help! thanks so much!

    Try after being connected to a charging source for at least an hour:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch will not turn on when plugged in or when I press the power button. I need to send it in for reapir, but I need the serial number. Any round about solutions?

    The back of the Ipod is warn so I can't see the serial number, so please let me know if you know anything that would help.

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    To find SN:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • IPod touch black screen, not recognized when plugged in

    I just brought myself an iPod touch 4th gen so I decided I would give my old one to my brother so I was clearing it off for him and some other things when I accidentally pulled it out of the computer I then pressed the sleep button to turn it on but the screen remained black so I tried plugging it back
    In the computer but it shows it as a unknown device then I tried plugging it into the wall charger which didn't work either. My friend thinks it might be in dfu mode but if it was wouldn't the computer still recognize it? Any suggestions? Please and thank you :)

    Google for a third-party repair place or sent it to Appe. See:
    Apple - Support - iPod - Service FAQ

  • Ipod nano won't start itunes when connected

    When I plug in my new Nano (9th generation) it won't start up Itunes.  Once I open Itunes it snycs my nano then disconnects the nano.  I can't choose or organize any items on the nano as they are "greyed out" and not accessible.
    ANy ideas?

    Hello khan69,
    I'd recommend manually putting the iPod into Disk Mode, then restoring the iPod via iTunes.
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/TS1463
    Cheers,
    Allen

  • Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

    Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

    B-rock, thanks for posting the above.  I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\.  When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
    I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
    I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message.  I've reset my ipod thinking that would help but still, no backup.
    In iTunes, Edit, Preference, Device there are no backups.
    What am I doing wrong, can you help? 
    Thank you!

  • Problems with ITunes 10 for Windows with Ipod Touch

    I have had several problems with my original 16Gb ipod touch since upgrading to ITunes 10. Windows Vista Home Premium. I had no significant problems before ITunes 10.
    1. Numerous apps upgrades fail with an error message (approx) "installation failed because resources have changed." I have searched for information about this, but all I could find relates to developers, not ordinary users. I can upgrade the apps directly, using a wifi link - just not through ITunes 10. (Apps: Dictionary.com, StarWalk, etc.)
    2. After repeated examples of this, I decided to try restoring the ipod. I've done this several times in the past without problems. This time, it repeatedly failed at step 3 of 5, re-installing my music, with "unknown error." The ipod was unusable after this. I eventually had to restore on another computer that still had ITunes 9 installed - that worked, but I lost all me recent data entries. (After successfully restoring using ITunes 9, I tried again with ITunes 10 - same failure.)
    3. Now, all podcasts that I install are played back at an unusable low volume. They are just loud enough to barely hear in a very quiet room, but not loud enough to be usable. The podcasts play fine when played directly in ITunes. Music installed on the ipod plays properly. I have tried using the Podcast option in ITunes to change the volume, but that has no effect. I have tried several speakers and headsets - all the same. Podcasts are probably the most important use of my ipod, and now they are useless. These are popular podcasts, such as CBC's As It Happens - I don't think that the originator would have had an undetected problem for this long.
    Any suggestions?

    This symptom could be caused by an unusable iTunes configuration file. Follow the steps below to troubleshoot this issue.
    Remove SC Info.sidb file
    (This applies to Win7 or Vista)
    From the Start menu, click Computer.
    In the Organize menu, click Folder and Search Options.
    Click the View tab.
    In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    Click OK.
    Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
    Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
    Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
    Restart the computer and open iTunes.
    If this does not work, repair your Quicktime - START / CONTROL PANEL / PROGRAM and FRAETURES / highlight QUICKTIME and click REPAIR

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • Error during iTunes 10 installation - iPod Service failed to start

    Hi Everyone,
    I am getting this error during installation of iTunes 10(Windows XP).
    +*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
    *Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
    I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

    I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
    1. Right click on "My Computer", select "Properties"
    2. Click on the Advanced tab.
    3. in the Startup and Recovery section, click the Settings button.
    4. Click the Edit byutton to edit your boot.ini file in notepad.
    5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
    6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
    The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

Maybe you are looking for

  • Draft invoice and payment terms

    A customer has 30 day credit terms (for example), but when creating a DRAFT invoice the docuemnt date, posting date and due date defaults to todays date.  When converting the draft invoice to an INVOICE, the due date remains as today - not the paymen

  • Applet Does Not Display

    Hi! With these two perplexing pieces of code, I should be able to show a red "Welcome to Java" string. But it doesn't render when I open the HTML file. I don't know why, I seem to be passing the parameters properly. Applet: <html>      <head>        

  • How do I remove formatting in a Word doc converted from PDF?

    I have the PDF to Word Converter. When I convert the pdf to Word and try to type or edit the doc it is so heavily formatted that I am unable to make the changes I want. The other issue is some symbols, when converted, come our  distorted when compare

  • Some problem with IDoc's Settings while loading data

    Hey Experts, Previously i tried data loading using LIS & LO, but i was not able to load data, i was taking it as some transfer structure problem. But just today i tried to load Master Data, and its displaying the same error. I feel its something rela

  • Error in Project Server 2013

    Hi, I set myself as team member in Project Server 2013, when i click on Project,Approvals and Timesheet i receive the below error: "Cannot communicate with the server. Verify your connection and try again" I have other account with Project Manager ri