Windows 8 keeps losing connectivity

Hi, not sure if this is unique but for the past few weeks Windows 8 has been losing connectivity every few minutes when browsing web pages, playing games etc. I am sure it's windows 8 as I have another work laptop using XP that I can be on all day via a
VPN and that does not drop at all (it would normally drop within a few seconds of losing connectivity). I've done a lot of searching on the net for the same issue, others seem to be having similar things happen such as slow speed but can't find anything that
matches, hence this separate question.
I have also tried swapping routers to no avail. The thing is, you wouldn't know anything had happened from the network connectivity. Suddenly a page won't load. The wireless connectivity at the bottom right of the screen shows a full 5 bars (not limited
connectivity). The way to get it back again is to leave it for a few minutes or disconnect from the router and reconnect again. Even whilst typing this I have had to do that twice.
I'd appreciate some suggestions!
Many Thanks, Paul.
PS... IPCONFIG/ALL shows...
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
Wireless LAN adapter Local Area Connection* 17:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Hosted Network Virtual Adapter
#3
   Physical Address. . . . . . . . . : 56-DE-2B-64-0B-25
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter WiFi 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Qualcomm Atheros AR5B125 Wireless Network
Adapter
   Physical Address. . . . . . . . . : 74-DE-2B-64-0B-25
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 192.168.0.4(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : 11 May 2013 10:31:15
   Lease Expires . . . . . . . . . . : 12 May 2013 10:31:21
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCP Server . . . . . . . . . . . : 192.168.0.1
   DNS Servers . . . . . . . . . . . : 194.168.4.100
                                       194.168.8.100
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetLink (TM) Ethernet
   Physical Address. . . . . . . . . : DC-0E-A1-07-A8-F0
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A319BEA5-A55C-4E0C-AF67-922BEBD4C7BB}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:953c:3483:1732:adda:66e3(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::3483:1732:adda:66e3%14(Preferred)
   Default Gateway . . . . . . . . . : ::
   DHCPv6 IAID . . . . . . . . . . . : 436207616
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-28-39-CC-DC-0E-A1-07-A8-F0
   NetBIOS over Tcpip. . . . . . . . : Disabled

Hi,
Does this issue occur with both wireless and wired?
I suggest to perform these tests to troubleshoot the issue:
1 Update NIC card for your machine
2 Temporary disable firewall and antivirus program
3 Logon with Safe Mode with Networking
4 Update framework for your router.
Leo Huang
TechNet Community Support

Similar Messages

LaCie external hard drive keeps losing connection to Windows 8.1 computer

Hello all,
My LaCie external hard drive (Rugged version) seems like it keeps losing connection to my brand new Windows 8.1 laptop. The laptop is an HP Pavillion 15-p 133cl TouchSmart Notebook which I just got today. Basically, every few minutes, or if I nudge the external
a bit, the computer will seem like it disconnected and reconnected to the external hard drive in a split second and bring it up in the Windows Explorer. This external hard drive doesn't show any problems connecting to any other computer, but it has occurred
with 2/3 ports on this computer so far. I'm a bit worried, because I definitely DO NOT want the files on this external to get corrupted in any way. What should I do? Thanks a bunch.

may I know your external HDD model, to check which USB version to isolate power and cable connection issue
if this is USB 3.0 try to attached at USB 3.0 at your laptop, your laptop has 2 USB 3.0 and 1 for 2.0, for external HDD with USB 2.0 sometimes need more power / more than 1 connection, sometimes the power will loose
but since the trigger it will disconnect if you nudge the HDD, I suggest back up data to your laptop first, try to change with other data or power cable, try also update your laptop chipset
try to check with other device to isolate port issue
may I know if you are using other PC, did your external HDD also will disconnect if you nudge it?
contact your external HDD manufactured to get some suggestion

Deskjet 3520 keeps losing connection to Mac

Last night, I installed an HP Deskjet 3520 printer to use with my desktop Mac (which is using OS Yosemite). I have an etsy shop where I sell prints of my illustrations, so I often have to print out multiple files in a row. When I installed the driver last night, I was able to wirelessly print the test page, but after that, I could not print wirelessly. Instead, I used the USB connection, which worked fine. I printed a round of prints and everything worked fine.
This morning, I need to do some more printing, and my Mac reported that there was no connection to the printer (even though the printer was connected via USB). I deleted the printer from my Systems Preferences Printers and re-added it, and I was finally able to do my printing (still not wirelessly).
Now, tonight, I have tried to do more printing and the Mac reports that there is no connection to the printer, USB or wireless. I tried deleting from Systems Preferences and re-adding again, but that didn't work this time. Then, I tried resetting the printing system, uninstalling HP, and re-installing the driver. Now, I'm at the part of the installer where the device needs to be configured and I am receiving the message:
Device Not Reachable. The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
I don't know what keeps going wrong! The little screen on my printer says it is connected to my wireless network AND I am still connected via USB so I don't know how the device would not be reachable. I also don't know why the printer would keep losing connection with the computer every time I need to start printing again. Please help!!

Hi @tylertot
This is in deed a little strange, but I'd like to help! Some of the steps I am going to offer are steps you have done, but I;d like to perform the following steps in the order presented to see what happens. Please give the following a try;
Leave the printer on and unplug the power cable, also unplug the USB cable. Restart teh Mac and then plug the printer power cable back in. You can also go ahead and reconnect the USB cable.
Reset Printing System - (I know you did this already, thus you know how, but here are the steps for others who may view this thread)
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions - I don't see that you have tried this yet, and this step might be crucial to resolving the issue.
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver. You can add the wireless or the USB, or Both. If you ad both, I suggest adding a name to identify one connection from the other.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
You can see in the image above where the name section is, if you add both connection types simply add USB to the beginning of one of the names.
Adding both printers and naming them to help identify them helps when it comes time to print. When you print something you can choose the printer with the appropriate connection type. For example, you can choose the wireless driver ad if you get an offline message try printing again but choose the USB driver. If the USB one works you will know the issue is related to the Wireless connection, and if it doesn;t then the issue is related tot he operating system. Really this is just a proactive troubleshooting attempt in case issue arise in the near future. If you only want to add one connection type that is okay too.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

External drive conntected to Time Capsule keeps losing connection

I've been having this problem since I bought my TC over one year ago. Other than this everything works fine (aside from the occasional need for a restart).
I have an external 500GB drive attached to my 500GB TC via usb. I use the TC strictly for backups and the other drive to host my media files. When I want to use those files I switch on the drive. Only about half of the time does that work. When it does work everything is fine. I see the drive in the finder as expected.
When it doesn't work, I can see the drive name in the finder. But if I click to go into the folder, I get an error saying that the connection cannot be found.
It shows up in the Airport Utility as normal.
Powering the drive off and on does not help.
Relaunching the finder doesn't help either.
The only way I can connect to the drive again is to either logoff and log back into my mac, or restart the TC.
It seems that my computer is remembering some kind of network disk mounting settings that don't get refreshed when I turn on the drive, but then do get refreshed when I logoff and back in. Does anyone know how I could force that refresh to happen? Has anyone had this problem before?
Any suggestions would be much appreciated
PS all my software and firmware are the latest.
Thanks.

OS X fan
This helped meRe: Time Capsule keeps losing connection in Finder
Dec 17, 2013 4:08 AM (in response to whootang12)
Left click on the Finder icon from the Dock and click "Connect to server...", go to recent server and click on your Airport Time Capsule.
THANK YOU!!!!
This solved it for me!

Why does my iPad2 suddenly keep losing connection on facetime?

Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?

Does it happen anywhere that you use FaceTime or only in your home WiFi network? If it happens with your home network, have you tried power cycling your router? Unplug it for about 30 seconds and then plug it back in.
Turn WiFi off and on in the settings. Reset the network settings.
Have you tried any troubleshooting steps at all?

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

Why does my iPad keep losing connectivity

Why does my iPad
keep losing connectivity ?

Hi Joan,
I'm sorry to hear you are having issues connecting with Wi-Fi from your iPad.
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iOS: Troubleshooting Wi-Fi networks and connections
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap the blue dot and choose Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
If your issue is still unresolved
Follow the steps below for the issue you are experiencing.
Unable to locate a Wi-Fi network
Unable to connect to a Wi-Fi network
Wi-Fi disconnects, or signal strength is less than expected
Unable to access the Internet while connected to Wi-Fi
Unable to automatically connect to Wi-Fi
I hope this information helps ....
Have a great day!
- Judy

HT2845 why does my wireless mouse keep losing connection?

Good morning,
My wireless mouse keeps losing connection...my batteries are at 100% and the "discoverable" option is checked off. Why is this happening?

Hi:
PRAM=parameter random access memory - reset like this:
http://support.apple.com/kb/PH11243
SMC=system management controller reset like this:
http://support.apple.com/kb/HT3964
Sometimes resetting these "fixes" odd problems - and it cannot hurt.
To make a device a favorite, go to system preferences>bluetooth. Highlight the device. If detailed information is not shown, click oin the little gear>show more info. Then click on the gear again and make the device a favorite.
Barry

Why does my mouse keep losing connectivity

My magic Mouse (came with the system) keeps losing connectivity. It seems that whenever the mouse has a period of inactivity such as when I am using the key board, it loses connectivity and I have to double tap it (two fingers) to get it to reconnect. Battery is >80%. Is this normal or is there a setting that can insure it stays connected? I appreciate any advice even if it is I have to put up with this annoyance. Thanks.

BDAqua
Thanks for the response. My WFi is a Linksys E2000. Because of the number of messages in the Console I will have to wait until the next time I lose connectivity and then check for messages in Console to see if there are any clues to what is going on.

I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
CB

2008 Mac Pro keeps losing connection to my Plex Blu-ray burner

my 2008 Mac Pro keeps losing connection to my Plex Blu-ray burner. It is installed in the second optical drive bay. If I power down, pull the connections to the drive and re-attach, the drive is again recognized on boot. A day later, no drive found. The first optical (top bay) drive never loses connection. Any thoughts?

Disable drive sleep in the Energy Saver system preference.

HELP: Keep losing connection!

Just got an airport express last week to replace our philips wireless router because my wife keeps losing connection with her ibook g4. But alas! We are having the same problem with her computer. My macbook pro is connected, but I have had to reset several times already to try and get my wife connected. This is really frustrating, as there are no clear message as to what the problem is. And when I reset sometimes, we both get connection but could not connect to the internet. Do I have to sacrifice security for stability? Because everytime I make the network secure, we always had problems.
Please, I'd appreciate any help.
Thanks.
macbook pro Mac OS X (10.4.8) ibook g4

sagada, Welcome to the discussion area!
Check for other devices that use 2.4 GHz. These could be directly interfering with your wireless network. Remove those devices if possible. If that is not possible, try changing the channel used by the AirPort Express (AX) until you find a channel that works better or you run out of channels.
KB 58543, AirPort: Potential sources of interference

Keep losing Connection I Phone 4s

Ive had this problem on and off for a few weeks now ive got signal and my 3G is on my phone keeps losing connection to the internet weather app facebook and the app store it seems to have happened since i updated my phone to 6.1.3 it comes back on if i turn my phone off and back on but this get really annoying the past to nights its lost connection over night just wondering if any one else is having the same problem and know when an update is due its says my software is all up to date??

HA d you tried the very quick trick that seems to work for some - the cycling of the "Airplane Mode" switch on the settings first page. It DOES reconnect here in Barbados (carrier is LIME ) and will hold for at least a week or more... Suspicion is that the carriers may 'fiddle' with their own networks as the upgrade and modify things.... And some phones are very sensitive to slight changes in protocols. A reboot often doe s not solve this problem, because the phone will reboot to whatever settings were in use at shutdown, but Airplane Mode on then off forces a refresh....without doing a 'reset network settings' which will cause the dump of stored wifi networks and passwords.... I have had to apply this 'fix' ( with success ) to both my and my wife's iPhones 4s, using ios 6.1.3 , more than once ..... Best of luck with it and please post the result !!

When i play certain pogo games i keep losing connection why is that

i keep losing connection from the interent when i play certain pogo games

what can i do to fix this

Why do I keep losing connection to my MIFI4510L

Why do I keep losing connection to my MIFI4510L. After a period of time this device disconnects from the internet. What do I have to do to correct this?

This seems to be a problem in various areas. I'm in Michigan north of Detroit, when they switched from 3G to 4G, reliability and speed dropped significantly. My first service calls were frustrating as the service tech told me I had unused WIFI setups on my PC and I needed to delete them. told him the device works everywhere else, but he was instant I delete the unused, imagine that fixed nothing. I was sent a replacement device (refurbished without a battery or back) which was worthless as it was different form what I have and could not be used, so I sent it back I have emailed the Customer Service VP for the region and after months of not getting the issue resolved I was told 4G service was in the process of being updated in my area and not to expect it to improve until sometime in 2013. Since the device detects 3G and 4G, it switches to 4G and connection often drops to 1 mbps and cannot even get a Google page. Under 3G, it was pretty consistent at 68 to 72 mbps. My options are to replace my 3G/4G device with a 3G only or change to a different service provider. I have a cottage basically on the fringe area and 3G connects at 68-72 99% of the time and outside of Boston, Washington north of Seattle (almost Canada), Texas, Chicago, etc, 4G works great, so it is not the device. Guess I'm not sure the push to 4G if they are not ready. Guess once the sale is complete they have you and if service is bad, oh well. The sad part, my current cell phone contacts are ending and I was seriously planning on leaving ATT to switch everything to Verizon based on service prior to the switch to 4G, but that does not make any sense now. My Apple 4G can be a hot spot and works great when I' m at home, but why pay for 2 different services. The other interesting note, I left Comcast due to poor service (internet was slow from 6am to 10pm or dropped completely) and now Verizon has teamed up with them... sure hope they are not the cause of poor internet service... like maybe Verizon is using them for internet service... I was told no... but problems started around the same time of the announcement. So based on responses from Verizon, I will check my other options. The commercials are great but reality is delivery, no so great.

I keep losing connection with my printer

I keep losing connection with my printer.

Can you provide more details?
- What kind of time capsule you are using?
- What kind of printer?
- How is the printer connected (Wifi, LAN, USB...)?

Windows 8 keeps losing connectivity

Similar Messages

Maybe you are looking for