Windows 8 Login extremely slow when the password is wrong

Hello everybody. I have a problem with Windows 8. On the login page if I input a wrong password, often it takes even 1 or 2 minutes to tell me that is wrong! I assume it tries to connect to the Windows Live Account to check if it was changed since last
time. Is there a solution to this problem?

If that was a joke, you're not funny at all. What kind of answer is that?! I assume you don't have anything better to do.
Hope someone can give me an useful answer, thanks!

Similar Messages

Firefox is extremely slow when the Flash Debugger 10.1.53.64 in installed and trying to debug Flex appls.

I have been using the Flash debugger in the past (WIN 9.x) and this worked fine. Currently I am using v10.1.53.64 to debug a Flex application.
== This happened ==
Every time Firefox opened
== I installed Flash debugger (10.1.53.64)

Hi Pavan, If you are having the same issue with Flex SWF, etc. please see my Post # 2. Starting your own thread is always best in the proper forum.
Thanks,
eidnolb

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Moving and renaming clips in the Project Window is EXTREMELY slow, but the rest of the program is fine?! PPro CS6

I have Win7 Pro X64 with Core i7 and 32GB RAM...
When I'm editing and doing other things, adding FX etc, the program works fine BUT when I do ANYTHING in the Program Window i.e. renaming clips, moving clips, etc the program acts as if it's bogged down... I can't for the life of me figure this one out...
I don't have a large number of clips/footage items
I've cleaned the cache
What else could be causing this? When I say slow, I mean a good 10 seconds before the program responds to anything I've done, and when renaming clips, I always have to do it twice because the first time it doesn't "take"
Thanks all for any help!
Aza

It occurs with or without clips in a sequence... the problem isn't the sequences, the problem ONLY occurs in the Project Panel, every other panel is as fast as my machine will allow (very fast) only the PROJECT Panel is EXTREMELY slow when moving clips into folders, etc
ALSO, all my drives and preferences are set up the same in every project, only THIS project is moving slowly... I even divided the project up into 4 separate projects to cut down on the number of clips in each project, and it still moves slow... almost as if something has carried over to each project, or something

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Zen X-Fi2 extremely slow when loading playlists!

0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

Hi Vokivolli,
Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Configuration is Admin server plus 28 JMS servers - no nodemanager - all on the same server.
When I bring up Admin console alone response is quick but bringing up JMS servers one by one will slow it down.
I did not experience this problem when this configuration was in Weblogic 9.
Memory configuration is -Xms4g, -Xmx4g.
Any ideas what else I should check ?
Thanks.

Hi,
Collect multiple thread dump at the interval of 10 sec and check what the threads are doing .
Thread dumps will give you some information about why there is a slowness .
Ways to collect thread dumps
Thread dumps & Ways to take thread dumps - weblogicexpert
Hope it helps

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Videos are extremely slow when trying to view them

Here is the situation. I have been posting course material for over a year now, and everything had been working fine. Over the last week, any video that I try to view from our iTunes U site is taking at least 5 minutes to play, when I double click on the video I get the loading bar, the videos that are less than 30 minutes long take between 5 - 8 minutes to play, the ones that are over 30 minutes take between 10 - 15 minutes to play. This had never happened before, and the weird thing is that I can go to any other iTunes U site and view videos that are two hours long and it takes less than a minute to play. So I know its not my network bandwidth or I wouldn't be able to view other sites. I use an iMac with a 2.8 GHz Intel Core 2 Duo, 4 GB of Ram, bought specifically for iTunes U administration. I don't know what else to do. Any help or advice will be truly appreciated.
Ernesto
Oklahoma City University

I have also found our iTunes U site extremely slow for the past few weeks. It also took a long, long time to log into Admin. But at least for us, there has been a noticeable change (for the better) in the last few days.

IOS6 extremely slow when updateApps

iOS6 extremely slow when updateApps on my iPad2. why?

Try clearing history and the cache...
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaning boxes then click Reset.
Quit and relaunch Safari.
See if that made a difference.

IPhone 6 and 6 plus camera extremely slow when using flash

I have noticed that the iPhone 6 and 6 plus camera is extremely slow when using flash, it is definitely slower than iPhones 5 and 5s.
Any explanation/solution for this?

I Have done some more testing and it seems turning off HDR resolves the issue

How do I delete a user when the password was forgotten. I have a OS X Yosemite 10.10.2

How do I delete a user when the password was forgotten. I have a OS X Yosemite 10.10.2

Administrator password forgotten?
OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

Windows 8 Login extremely slow when the password is wrong

Similar Messages

Maybe you are looking for