Windows 8 MacBook Pro retina

Does Apple hive drivers for Win 8 / boot camp yet? Can you run Win 8 on MBPS Retina?

RE: Windows 8 Mack Book Pro Retina, Yes
Apple does have drivers,
HI Ysuhass,
Yes, I have a Mac Book Pro Retna Display, with Windows 8, with Apple Drivers for Mac, downloaded, since its release 11.10.2012. Apple Drivers are available for Windows 8. just as you suggested. I have had no problems at all. Windows 8 you may wish for "Start 8" which is a classic start similar to Windows 7. It has the classic pearl feature start and has the classic start screen showing previous programs started, and control pannel, printers, run, and shutdown.
A Key point to use "Windows 8" easily with a mouse. Use Windows Key + "X" key to find a pearl start button on the desktop when the touch screen occurrs and you are using a mouse. Or if you get stuck with a web site, and no place to start another screen use the options key + "X" Good luck and Have fun!

Similar Messages

Photoshop CS6 a little 'jerky' when moving layers & resizing window (Macbook Pro Retina 650m)

As title says, when I open Photoshop CS6 and simple make a new layer and either use the type tool, it appears to be a little Sluggish/Jerky when moving the layer around.. The same applies when resizing photoshop itself.
I'm updated to the latest version of CS6 and have tried all the combinations in the 'Performance' section of Photoshop.
My Macbook Pro Retina is the 3.4ghz 650m and 8GB RAM offering (OS Mavericks). It's really annoying me as even my old laptop could run it smoothly and that was an i5 and much lower-end graphics card.
The only way I can really describe it (and i'm no tech professional) is when comparing it to silky smooth 60 fps, it looks like it's skipping frames and in term looking 'jerky'. I also use Illustrator and don't really witness the same problem with it.
I know this may have been asked quite a bit.. But I've never found the solution.. Could anybody advise me on what it potentially could be down too? (Might I add the laptop has just had a fresh install of the OS and a fresh copy of CS6)

You could check through the GPU FAQ for anything you might have missed
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
You say you have tried all settings in Performance, but I wonder what your cache levels are set at? If more than 1, then OK.
There's the general performance FAQ (no doubt lots of overlap)
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
Is this with all image docs, or particular ones? For instance I have been playing with using ACR to process 32bit HDR files, and it puts a huge load on the system.

What hbmi cord do I need to connect my Macbook Pro retina display to a Windows desktop?

I'm trying to connect my Windows desktop to my Macbook Pro retina dispay so i can transfer CD's. ALthough I dont know what cord to get.

Your post is a little confusing. HDMI is for connecting video, like hooking your Mac to a TV. It sounds like you want to transfer files. If you have a wireless network, just share the folder with the music on your Windows machine and you should be able to copy it to your Mac.

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus." As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

A few more issues...
In Console, the following is greyed out:
User and Diagnostic reports
Com.apple.launchd.peruser.0
Com.apple.launchd.peruser.88
Com.apple.launchd.peruser.89
Com.apple.launchd.peruser.92
Com.apple.launchd.peruser.97
Com.apple.launchd.peruser.200
Com.apple.launchd.peruser.201
Com.apple.launchd.peruser.202
Com.apple.launchd.peruser.212
*[user logs are accessible]
Krb5kdc
Radius
My guest files are locked, but again I am the administrator of MBPR.
I am worried about a keystroke logged or at least, trying to rule it out.
Also:
Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
WARNINGS in Console include:
[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues?
I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014

Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?

yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid

Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or " No System Disk availabe".
My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
My Boot Camp is version 5.0.1
My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
From what i saw in the apple support it should work on my macbook. I hope someone can help me.
Thanks in advance.

Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

HT5266 best resolution in windows 8.1 on macbook pro retina 15 ?

Hi
which resolution is the best in windows 8.1 on macbook pro retina 15 ? for software Like SolidWorks or the other? because the recommended resolution is good but some software like SoliWorks not optimized for retina resolution !!!
Thanks

Is your rMBP a dual-GPU model, or does it only have the Intel Iris GPU?

Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
Under Windows 7, the highest resolution that supports True Color is 1600x1200. This would be okay if that setting did not distort the picture (everything is slightly squeezed). At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work. On my 27" iMac, 2680x1600 supports True Color as expected.
Also under Windows 7, the display connected via HDMI is not recognized.
I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
Thanks,
Warren
P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
If you need to do this on your MBPr Boot Camp volume, use this link:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC. As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well." And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
-Warren

MacBook Pro Retina, good enough for a few of After Effects? Or should I go for Windows Laptop?

Hello!
I'm now a college student ! And I'll need to get a new laptop We will be using it for CAD, MathLab etc.,
But I practice on AE, I'm no expert at all (i don't even know some of the controls and keyboard shortcuts), I do like 'opening titles', a bit of 'harry potter effects', etc. I'm really interested in the new Retina Display MacBook Pro (base model), it will be the first time I ever get a Mac if I go for it
But of course, the price is really high, so I have my doubts - the specs of the rMBP is not that superb - i think only the resolution is.
My question is, will the base model rMBP give a decent After Effects CS6 performance, or a significantly worse performance than Windows Laptops at it's price?
Thank your for your time
Please ask me anything so I can help you better to help me

I have a decked out MacBook Pro Retina and it works very well for all CS6 apps. It's actually faster by a bunch than I thought a laptop could be. I have several personal reasons for going Mac. They are my personal preferences and experience for reliability, stability, and customer service. I'm not married to OSX. If a better system for me was available I'd be using it. The for me is the critical part of that statement.
The biggest advantage of Mac computers is that there is very little chance that the components have not been fully tested and integrated. The QA/QC in all Mac hardware is some of the best in the world. Every Mac I've ever owned has been virtually trouble free mechanically and outlasted every windows machine I've ever owned. Apple does make mistakes and fouls things up, but the chance that you are going to end up with a machine that just works and runs and runs is much higher than anything built from the variety of components available on Windows machines.
Now my comments on windows machines. There are more manufacturers that I can count. There are more hardware combinations that I can imagine. Some manufactures produce excellent products. Some are just junk. Some last a very long time. Some breakdown all the time. If you were to go Windows make sure you check out the reputation and the warranty of the company building your machine. I've only owned one really high end Windows machine from a high end manufacturer. It ran just fine for about a year and a half before it needed some major component replacements. The warranty was out, there was no extended warranty available from that manufacturer, so the repairs cost me about 1/3 of the purchase price. If I'd gone with a company with a better service policy I would have saved a boatload of cash in the long run. Every other windows box that I've owned has been built from scratch or purchased in a shoe string. It took a fair amount of monthly maintenance to keep them running well.
You mentioned CAD... Audocad on the Mac side is really crippled. My associate has the full Autocad Civil Engineering package running on his MacBook Pro Retina under Parallels. It's working fine. It's one of the largest and most complex CAD packages available. It actually works better on the Mac than it does on his HP laptop and the Mac batteries last a lot longer. The HP laptop cost about half what the MBPro did. It's about 6 months older. It's not as loaded. If you were to replace the HD in the HP laptop with the same capacity SSD that is in the MBPro and bump the memory up to 16GB the HP would still be less expensive than the MBPro by about 18%. The HP is plastic and aluminum with a display screen that's very sensitive to scratches and damage by pressure. The HP is not compatible with CS6's ray traced rendering or Mercury playback for PPro. There is an HP model that is though.
You be the judge. Balance your budget and the software requirements with the expectations of reliability, service, customer service, and resale value and make your choice.

HT3986 I got a macbook pro Retina and I installed a windows 7. The problem is I can't find drivers for the Macbook pro retina hardware which work for windows 7

I got a macbook pro retina and I installed windows 7. How can I get the windows 7 drivers for the Macbook Pro Retina?

Read the Boot Camp Instructions, you have to download the drivers using Boot Camp Assistant
If you missed that I suggest that you read the instructions again.

What is the proper resolution to use with bootcamp and Windows 7 on a Macbook Pro Retina?

Hi All,
Let me start by saying I have read numerous articles and blog posts about choosing the correct resolution to use when running Windows 7 via Bootcamp on a MacBook Pro Retina (15"). I have not found the "silver bullet" (correct resolution). My eyes are sensitive to displays that are running in non-native resolutions (scaling).
When running the display in native resolution (2880x1800) everything looks great, except that icons and text are way too small to read. I have played with the zoom settings (150%, etc.).
When using any scaled resolutions, the display doesn't look as crisp and I get eye fatigue. I have also tried Windows 8, with the same results (no surprise).
I would love to use this Macbook to run Windows 7 because the hardware is great, but it looks like I may have to switch back to Dell/Lenovo/HP.
Is there a proper or "best practice" resolution to run at in this scenario? I want to give it one last try before putting the laptop away...
Thanks for any help!
Andrew

While I've never seen retina display, if you have not tried Hi-Contrast in Windows, you might find settings with it that are comforatable.
This is set with desktop rightclick->Personalize. You can vary desktop icon size in the View option above Personalize.
You can change most of what you see in Windows foreground/background colours & text with high contrast settings.
Also, text size in Windows browsers is variable with the Control an + and - key combo.
If the display you use is small maybe an external 24" or 27" monitor, if possible, would alleviate problem.
The attached pics are expadable by double click.

Windows 8.1 ok on mid 2012 macbook pro retina ??

hi,im on the brink of purchasing windows 8.1 from microsoft but would like some feedback first if it runs ok on macbook pro retina mid 2012 ??

Windows 8.1 is compatible with the Mid 2012 MacBook Pro with Retina display, and you shouldn't have any problem by installing it.
To install Windows, follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf Remember to download the Windows support software, as indicated in the how-to

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Cache Hierarchy Error
Processor APIC ID: 3
The details view of this entry contains further information.

likely win8.1 dont have official bootcamp support yet
1/3 of my logins into win8.1 result in a fatal bluescreen
was the same deal when I installed win8 before official support
and when the drivers with official support was released the issue went away

MacBook Pro Retina 15.4, impossibilité de charger windows 8.1 à l'aide de lecteur de disque externe sur Mavericks. Boot Camp ne reconnais pas le disque. Quelqu'un à t'il la solution?

sur MacBook Pro Retina 15.4, impossibilité de charger windows 8.1 à l'aide de lecteur de disque externe sur Mavericks. Boot Camp ne reconnais pas le disque. Quelqu'un à t'il la solution?

sur MacBook Pro Retina 15.4, impossibilité de charger windows 8.1 à l'aide de lecteur de disque externe sur Mavericks. Boot Camp ne reconnais pas le disque. Quelqu'un à t'il la solution?

Windows 7 on MacBook Pro Retina late 2013. Showing popup window as "Windows detected a hard disk problem"

I have installed Windows 7 64 bit version in my MacBook Pro Retina(13") late 2013 model . It was working fine from last 8 months but recently popup window showing as "Windows detected a hard disk problem" once login. Please check the following image.
I have contacted Apple Support team. They have tested the hard disk while booting from Mac OS and all the reports showing as hard disk is fine. Then I thought might be it was some virus and removed the Bootcamp partition and re-installed Windows 7 Operating System. But once updated Windows 7 with latest updates. This message showing again.
Would you please help me out to fix this issue. Anybody faced similar issue?

No I think that all drive are really on failure
I've boot with an ubuntu livecd and smartmontools see also the failure.
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail Always       -       0
9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1872
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       762
169 Unknown_Attribute       0x0013   253   253   010    Pre-fail Always       -       4003597393408
173 Unknown_Attribute       0x0036   100   100   100    Old_age   Always   FAILING_NOW 12124890467160
174 Unknown_Attribute       0x0022   099   099   000    Old_age   Always       -       7469954
175 Program_Fail_Count_Chip 0x0022   099   099   000    Old_age   Always       -       4989854
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       31
194 Temperature_Celsius     0x0022   064   064   000    Old_age   Always       -       36 (Min/Max 11/75)
197 Current_Pending_Sector 0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   199   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0022   100   100   000    Old_age   Always       -       0
When I use the Mac disk tools from the startup menu, it see also the problem.
Now the big question is : Why I've this type of issue with 2 MBA and 1 Macbook pro 15".
Their configurations are the same : windows 7 with truecrypt.
Maybe Windows drastically reduces the lifetime of the Apple SSD drive.
The 3 Mac are used for less than 6 month !!!!

Windows 8 MacBook Pro retina

Similar Messages

Maybe you are looking for