Windows 8 Mail - Want to add Exchange Account - Need a MS Account?
Exactly as the title says. I want to use this touch interface mail for our existing exchange accounts.
But then the mail app requires me to setup an MS Account...? We have hundreds of users - this is retarded.
Do Apple require me to setup Apple IDs for exchange access? What gave anyone the retarded idea that this would be ok?
Seriously what do I do? I have hundreds of users and will be moving a few to Windows 8 Tablets - Creating Microsoft Accounts isn't an option for an enterprise at all.
You can apply a Group Policy to a device to make a Microsoft Account optional for the Windows Communications apps.
To apply the Group Policy setting:
Launch GPEdit by opening the “run” prompt (Windows key + r), and entering GPEdit.msc
Go to Computer Configuration > Administrative Templates > Windows Components > App
runtime
Select Allow Microsoft accounts to be optional to configure the policy
If the Group Policy is applied and a Microsoft account is not used, the Communications apps will:
Prompt the user for a work account (i.e. an Exchange ActiveSync account) password
If account credentials are provided, use Exchange ActiveSync to synchronize email, Contacts and Calendar from the work account
Similar Messages
-
I want to add money to my iTunes/AppStore account
I want to add money to my apple account without buying a gift card
You cannot.
You can enter your credit card details and that card will be charged whenever you purchase. -
FBL3n tcode output i want to add customer filed, need details steps
Hi All,
I want to add customer number to the output for the tcode FBL3n, Kunnr(ZZkunnr) added to RFPOS and RFPOSX structures, and then regenerating the RFPOSXEXTEND program and added this entry in the table T021S. after that written coe in the BTE 00001650.
But while regenerating the RFPOSXEXTEND program I am getting error - END OF PHASE 002 with Message No D0 322.
Can you give me the right steps.
Regards
Ajay.Hi Ajay,
Please check special fields definition table T021S and check that
fields are correctly defined. Review that 'field names' and
'table name' are filled and input correctly.
Please also review notes 984305 and 215798.
RFPOSXEXTEND is aborted with error message D0 322 because of wrong
entry in T021S.
Also check the following wiki page:
http://wiki.sdn.sap.com/wiki/display/ERPFI/VendornameFBL*N or
http://wiki.sdn.sap.com/wiki/x/fg3cCw
Also I recommend you to check the following thread:
Vendor & Customers in FBL3N
Kind Regards,
Fernando Evangelista -
I have an icloud account and an apple ID.
I want to create two new email addresses that my kids can use, but that are controlled under or by my account.
Somehow i've managed to create one new icloud email address, but can add another and can't see the one i've created in "manager my account"
Any help greatfully recieved.
Thanks
RichYou can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it. This means that if you created aliases for your kids they will not be able to retain the addresses when they grow up and have their own accounts. Also note that though this means you can read their mail, it also means that they can read yours.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a -
CAN NOT GET MAIL. TURNED OFF IPAD . RESTARTED. VERIFIED PROVIDER SETTINGS. DOES NOT WORK. IF I CANCEL ACCOUNT AND OPEN NEW ONE WILL I LOOSE PREVIOUS MAIL.
I've removed my yahoo account several times. All it does is delete the info off my iPad and doesn't touch the account itself. So I can go back in, re-add the account and then redownload my mail again. I haven't had to change my passwords or anything.
You might look on sympatico's site, see if they have any troubleshooting specific to iPads. -
Mail worked properly, then some folders were invisible (sent mail) yet still visible on iPhone exchange account. Then download of inbox stopped in an endless waiting position with erratic messages about current activity. A rebuild of the account brought temporary relief, then the same thing started again. I have seen similar postings, is this a bug? Does anyone have a solution?
Since my uograde to Mavericks 10.9.3, mac mail is not allowing me to send large files with the same behavior described in thread by mikemachead original post here. I have tried the de selecting and selecting back the "store drafts in server" , rebooted multiple times, yet keeps asking me to select SMTP as the exchange server supposedly cannot send it. I have no limits set in the server(in fact I receive emails with large attachments) and had no issues up until the update. Anyone have suggestions as to how to fix it???
-
My wife gave me an Ipod touch and I want to make it my device and sync it with my user profile. How do I do that?
Just what do you mean? Just connect to your computer and sync. Nothing special is required. To seperate them in iTunes see:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities
chiefsfan19 wrote:
I can't figure out how to add it as my device on Itunes? -
Add Multiple records to G/L account group.
Dear ABAP Experts,
i have requirement that is using BDC recording file the Functional People wants to add records to the G/L Account group. The FI consultant gave the recording file, based on the recording file i developed a BDC program. This BDC program will work for single record. After creating single record system will ask for transport request .
REPORT ZDP_ACC_GRP.
TYPES: BEGIN OF TY_TAB,
KTOPL TYPE KTOPL,
KTOKS TYPE KTOKS,
TXT30 TYPE TXT30,
VONNR TYPE VONNR,
BISNR TYPE BISNR,
TRKORR TYPE TRKORR,
END OF TY_TAB.
data: lt_tab type table of ty_tab,
wa_tab type ty_tab.
data: begin of record,
* data element: KTOPL
KTOPL_01_001(004),
* data element: KTOKS
KTOKS_01_002(004),
* data element: TXT30_077T
TXT30_01_003(030),
* data element: VONNR_077S
VONNR_01_004(010),
* data element: BISNR_077S
BISNR_01_005(010),
* data element: TRKORR
TRKORR_006(020),
end of record.
* Batchinputdata of single transaction
DATA: BDCDATA type table of BDCDATA WITH HEADER LINE.
* messages of call transaction
DATA: MESSTAB type table of BDCMSGCOLL WITH HEADER LINE.
* error session opened (' ' or 'X')
DATA: E_GROUP_OPENED.
* message texts
TABLES: T100.
data:lv_file type string.
parameters: p_fname type IBIPPARMS-PATH.
at selection-screen on value-request for p_fname.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FNAME'
IMPORTING
FILE_NAME = p_fname .
start-of-selection.
lv_file = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = LT_TAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17 .
LOop at lt_tab into wa_tab.
perform bdc_dynpro using 'SAPL0F09' '0020'.
perform bdc_field using 'BDC_CURSOR'
'V_T077S-TXT30(01)'.
perform bdc_field using 'BDC_OKCODE'
'=NEWL'.
perform bdc_dynpro using 'SAPL0F09' '0020'.
perform bdc_field using 'BDC_CURSOR'
'V_T077S-BISNR(01)'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'V_T077S-KTOPL(01)'
WA_TAB-KTOPL."record-KTOPL_01_001.
perform bdc_field using 'V_T077S-KTOKS(01)'
WA_TAB-KTOKS."record-KTOKS_01_002.
perform bdc_field using 'V_T077S-TXT30(01)'
WA_TAB-TXT30."record-TXT30_01_003.
perform bdc_field using 'V_T077S-VONNR(01)'
WA_TAB-VONNR."record-VONNR_01_004.
perform bdc_field using 'V_T077S-BISNR(01)'
WA_TAB-BISNR."record-BISNR_01_005.
perform bdc_dynpro using 'SAPLSTRD' '0300'.
perform bdc_field using 'BDC_CURSOR'
'KO008-TRKORR'.
perform bdc_field using 'BDC_OKCODE'
'=LOCK'.
perform bdc_field using 'KO008-TRKORR'
WA_TAB-TRKORR."record-TRKORR_006.
perform bdc_dynpro using 'SAPL0F09' '0020'.
perform bdc_field using 'BDC_CURSOR'
'V_T077S-KTOPL(02)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_dynpro using 'SAPL0F09' '0020'.
perform bdc_field using 'BDC_CURSOR'
'V_T077S-KTOPL(02)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_transaction using 'OBD4'.
ENDLOOP.
FORM BDC_TRANSACTION USING TCODE.
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
* batch input session
* call transaction using
REFRESH MESSTAB.
CALL TRANSACTION 'OBD4' USING BDCDATA
MODE 'A'" CTUMODE
UPDATE 'S'"CUPDATE
MESSAGES INTO MESSTAB.
L_SUBRC = SY-SUBRC.
LOOP AT MESSTAB.
SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
L_MSTRING = T100-TEXT.
IF L_MSTRING CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
ENDIF.
CONDENSE L_MSTRING.
WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
ELSE.
WRITE: / MESSTAB.
ENDIF.
ENDLOOP.
REFRESH BDCDATA.
ENDFORM.
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
But the FI consultant wants to add multiple records to 'G/L account group'.After adding records before saving the system need to ask transport request at the last.
How can I write code ...??
Please help me.Hi Srikanth,
Thanks for reply,
You are right we need to load hierarchy for G/L then we can see all the G/L's for all G/L groups.
I have one more question when I check in RSA3 for the G/L account numbers, I could not find them.
I am using the datasource fi_gl_4 and in rsa3 I can see 1000 records data and when I put filter on G/L account and search for the G/L number I needed I cant see it, but it is there in the functional transaction(f.01)?
How to check for the required G/L's in rsa3 ?
Thx -
HT4436 How do I add additional email addresses to my account?
I want to add an additional email to my account for my little girl. How do I do that?
You can create an email alias at the mail feature at iCloud.com
-
Setting up windows mail and accessing webmail
two issues which I suspect are linked:
In trying to setup windows mail, and trying to send test emails I get:
Account: 'mail.btinternet.com', Server: 'mail.btinternet.com', Protocol: POP3, Server Response: '-ERR [AUTH] Error logging in. Please visit http://mail.yahoo.com', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
I've followed the steps for setting up the account as supplied at
http://bt.custhelp.com/app/answers/detail/a_id/9701/c/346,412/related/1/session/L2F2LzEvdGltZS8xMzAz...
and tried two variants on my username: firstname.surnameXXXX
and [email protected]
when I try to send/receive in Windows Mail - a windows security box appears asking to username/password
on entering the username/password the dialog box just reappears, and no progress is made. On cancelling the dialog the above error appears.
When trying the webmail login, and on entering my username ([email protected])
and the supplied password, yahoo login gives this error:
This ID is not yet taken. Are you trying to register for a new account?
This is a new account with BT broadband, with the account starting on 1 April, and broadband going live on 13 Apr.
Having setup Mail for other cable/broadband suppliers this is the most trouble I've ever had.
Had double checked that I'm not mistaking 0 and O in the username/password, and have even copy/pasted them from my original order confirmation, so confident I haven't typod either of these details.that's the page but actually log in on that page to your mail and not use windows mail just to make sure it is working before checking to see if you have an error setting up windowds mail. sometimes it can be 3/4 days after your broadband account goes live
I use windows live mail to pick up and send my btinternet mail without a problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Post exchange rate differences to separate account on invoice verification
Dear expert,
I'm facing a problem and need your guidance related to exchange rate differences between Goods Receipt and Invoice verification caused by time differences
My company buy an asset using purchase order with account assignment.
As an example:
Asset price on PO : 100 USD
On Good receipt (Exchange rate 1 USD = 9,000 Rp)
Journal created
Asset 900,000 Rp
GR/IR Clearing 900,000 Rp
On Invoice verification (Exchange rate 1 USD = 10,000 Rp)
Journal created
GR/IR Clearing 900,000 Rp
Asset 100,000 Rp (Exchange rate differences)
Vendor 1,000,000 Rp
My Company wants to put "Exchange rate differences" into separate account (Gain/Loss realized account) instead throw it on asset because asset value would be change. How make it happend?
I already try to configure KDM (Exchange rate differences) and OB09 and still exchange rate differences posted into assetHi,
Check config in transaction code Oba1 and Obyc. check posting G/L account of PO (KBS), n try to change in KDR Class.
Regards
Sanjeet Kumar -
I am admin and I want to add a new user to my account. But as written above, I want that he/she will get this product only for some month and not for a whole year.
Thanks for the help.Team license links that may help
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0 -
I am wanting to add my icloud email account to "Windows Live"....During the setup process I'm being asked for server type (POP or IMAP) and server address (Incoming and Outgoing) Where can I find this information?...The port boxes already have a number in them - 25 (outgoing) and 143 (incoming)..do I leave these the same??...also do I check the box "Requires a secure connection (SSL) for both incoming and outgoing???
iCloud Mail Server Settings
-
My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.
your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.
-
I want to delete exchange email account from my iPhone 5s but when ever opening the setting-Mail,Contacts,Calenders but no option to delete the account, please help
Do you have Settings/General/Restrictions/Accounts set to dont allow changes - i have an exchange email account on my 6+ and there was a button at the bottom to delete the account
i dont know that much about exchange ( i hate it) but im wondering if this might be some administrator setting on the account
Maybe you are looking for
-
Can't see old backups on Time Machine
Originally, I noticed the issue when I went to do a backup and it failed because there was not enough space on the disk. Then I went to see if I could delete old backups. In Time Machine it shows today and one other backup, 6 days ago. It should be
-
I want to put the audio from a clip at the end of the video. No video, just black screen
-
When I minimize a window in INDD and then open a new file, my minimized window pops back up. How do I keep it minimized?
-
Hi, I recently bought Nokia lumia 520 with the ram of 914mb so i cant play games like fifa 15(my bst) how can I have the ram of gb help me plzz...
-
Can you help with RoboHelp Version 11: WebHelp Index Keyword Sorting?
I'm new to RoboHelp 11, and I am finding it difficult to alphabetize topics listed under my Index Keywords. When I look at the keyword topics in my RoboHelp HTML editor, they are listed in alphabetical order (see the Tools topic in the first image),