Windows 8 major stability issues

Hi everyone,
I have several problems with my PC and it all started when updates could not be applied to the Windows 8, after that I tried to reboot the system and that didn't work (showed me the blue screen with Driver_Power_State_Failure). After that I tried to turn on my PC and after logging in (few minutes after) system just froze up and couldn't do anything but shut it down forcefully. After that I couldn't log in to the system at all and did several iterations of "Refresh", "Restart" and "Restore" every time with the same stability issues listed below:
- USB devices not recognized (mouse, phone, external disc)
- Can't update drivers through device manager (app just freezes)
- Can't install drivers manually (install wizard freezes at the end of the installation)
- Can't reboot the laptop (Driver_Power_State_Failure)
- Can't shut down the laptop (Driver_Power_state_failure)
- Wouldn't install windows updates (configuration failed ->blue screen)
- Laptop freezes randomly
And these are only the things I've noticed.
I've tried all the restart/refresh/restore options and every time same symptoms.
Can anyone help me?

Haven't you tried using the one key recovrey/Thinkvantage restore option depending on your model type Idea/Think
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

Iweb 08 has major stability issues

So, my last post was deleted when I talked about how disapointing iweb 08 was. I don't think I was over the top or saying anything that was untrue.
This software has major stability problems. I have seen other posts that confirm this. I cannot publish because it crashes on publishing. And worse, after the crash my system does not fully recover without a restart. tiger becomes sluggish.
Also, the enormouse amount of resources this program takes up is no better then 1.0

Gah, thought I had this problem down because I hadn't seen it in a day or two but I just had a crash again. Let me describe what happens:
So seemingly out of nowhere, as in I've been doing the same tasks for a few hours and then this happens, the computer locks up. First the wireless gives me no incoming or outgoing traffic. I'm still connected to the network at school, but nothing is happening. When I go look at the network stats on the iStat dashboard widget, there's nothing going on. Then if I move the cursor up to the menu bar, near the airport icon but sometimes near others as well, the beachball shows up. Not anywhere else on screen, just there. So I try to open activity monitor to see what's hanging. First I try it via Quicksilver, which subsequently gives me the beachball as well, and then by clicking on the activity monitor button on the iStat widget. Thats when the whole computer freezes up. I can move my mouse around and click on things, but nothing happens.
Background. I just performed the 10.6.2 combo update yesterday, so maybe that has to do with it, but i was on 10.6.2 since it came out and this problem only started about a week ago. I was just thinking that maybe it has to do with the newer version of quicksilver that I installed. That's the only thing that I think i've changed recently. I'll try and pull the old version out of a time machine backup later. I just checked the console and couldn't find anything that looked "scary" but that doesn't really mean anything. Could you tell me what i'm supposed to be looking for?
oh and @baltwo: it wasn't the forum formatting software that messed up your link, you added a - and then some other words directly after the link so it thought that those were part of the link as well. Well maybe it is the software, i dont know how you put the link into your post, but just don't attach words to your links. Leave a space or something.

Windows Vista major sound issues

On my 2 month old Unibody Macbook, I'm experiencing severe sound issues with bootcamp 2.1 in windows vista. While playing games such as Halo 2 or Fallout 3, which the macbook graphically handles exceptionally well for a laptop, the sound crackles and often disappears! To get the sound back I have to reboot my macbook. Help, this is extremely annoying, and apple won't do a thing about it!!! Please help!

try what I posted here and report back
http://discussions.apple.com/thread.jspa?messageID=9071165&#9071165

Major stability issues in Leopard

Ok, Color seems to only be stable under Tiger on my system for some reason. I have an AJA Kona III card, running Final Cut Studio, all software up to date. I DO have a USB and DVI extender so the Mac can be kept in the Machine Room, and I can work in my Edit bay, but I don't think this is the problem because it seems to work just fine in Tiger (I have it set up to dual-boot, and lucky for me).
Color seems to crash pretty much no matter what I do. Click on the next shot? KP. Scrub through the timeline? KP. What I'm having to do is use Final Cut in Leopard, and reboot into Tiger to use Color. I'd really like to avoid this, does anyone have any ideas why my stability could be so poor? FWI, this is an entirely fresh install of EVERYTHING, FCS, Color, Leo, etc.
Thanks,
-Kris

Ok, Color seems to only be stable under Tiger on my system for some reason
No surprises here. I do know a few people who have successfully moved into Leopard with COLOR, but there have been issues. I have enough reservations with Leopard to start with, and since it mostly suits non-ProApp users, its not worth the bother. FYI, the application now known as COLOR was originally an SGI/Unix development nee "Final Touch", and it has been chain-saw modified into OS-X -- so in a lot of ways its a miracle it runs at all. Yet another triumph (so to speak) of engineering over common sense! ;-P
BTW, COLOR runs fine on my MacBookPro under Leopard -- but its just there for show and tell. The real work happens on the MacPro main system, which is setup with peripheral extenders just like yours.
jPo

K8NGM2-FID Stability Issues

Major Stability Issues. Have yet to install windows successfully. Tried every bios setting imaginal. Tried dual channel and single channel memory cofigurations in every memory slot. When windows tries to install, the system will spontaneously restart, go dark and freeze, or the screen flickers and freezes, basically everything but install windows. I have also tried Suse Linux 9.3 and have experienced the same results. I currently have the Engineering pre production version Bios that other users have experienced having. I have tried to flash/update the bios following the Non-FAT instructions that came with the downloaded V3.1 BIOS zip file and that also has failed. I've read that other posters said they too could not flash the bios due to the fact that it did not recongnize the chip sets. Is there a way to update the bios without using the winflash utility? Is there anything else I should try? RMA? Help, I'm drowning. Thanks.

Anyways, I have had some limited sucess lately. MSI sent me Bios 3.13 which CAN be flashed through DOS. I did a memory test off my Suse 9.3 installation CD to get all my memory timings error free. I did a Western Digital test to make sure the hard drive was properly working. Here is where it got weird. Everytime I went to intall windows, it ask if you agree blah, blah and as soon as I hit F8 to continue it would either lock up or restart itself. I disabled everything in the Bios, went to one stick of Ram, and moved the harddrive to SATA 3. And Finally, I was able to get through the install process and finally get windows to boot up. Once windows is up and running it works great. The problem I am now experiencing is it doesn't always boot up. After the machine posts and is in the process of loading windows it will restart itself. Maybe once out of every 15 startups will windows actual load. Am I unlucky or is the 500 watt PSU I bought still not good enough? Thanks.

[Possible] Major Privacy Issue in Safari 5 - URL Autofill

From what I read on the Apple site, the URL autofill compares what you type to your history. However even if you delete your history, the autofill still comes up with sites that you visited in the past. If I delete my history, where is this info coming from? Seems to me that this is a MAJOR security issue if you're not the only person using the computer.
EDIT: Im seeing all sorts of random URLs popping up in the URL window when I type random letters. Is the URL bar also being used as a web search? (And if so, which search engine does it use for this?) I was under the impression it was only searching your history.
At first I thought these random sites being suggested were sites I have visited in the past and forgotten about... in fact a lot of them seem like sites I would have visited.
Its just so odd how random the results seem. Not just front pages come up, but pages a few levels deep on any given website. Strange thing this is to me.
Message was edited by: Frozo

I'm hoping someone will figure out a way to disable the URL history suggestions. It's totally annoying. I'm used to typing in the first few letters of a bookmarked web page to jump to it quickly. Now if I type some letters, I'm inundated with suggestions from keywords in my history, while the actual URL I'm trying to get to is buried beneath a list of other pages that have nothing to do with the page I'm trying to visit. Totally frustrating. Maybe it's good for some, but a way to turn it off is a must.

Illustrator CS6 Stability Issues- crashing every 5 minutes

Hi All,
I've been having serious stability issues with Illustrator ever since I upgraded from CS5.5 to CS6. It crashes like every 5 minutes, mostly when I use the "nevigator" tool to pan to another area of the artboard. The windows messsage was something like "the program has stopped working".
I am really sick and tired of that and this is seriously affecting my productivity. Furthermore, does Illustrator has any auto recovery function?
Does anybody know what might be wrong? I am using Windows 7.
Grateful for your help.
Best,
James

I keep having the same problem. It would be half as bad if there was at least an auto recovery function.
Also on CS6 / Windows 7.

InDesign CS5 Stability Issues

I got really fed up today.
Trying to resize a magazine, all the articles are individual documents compiled in a book. So each "chapter" is at least 3 pages and at most 15.
I adore the spanning columns feature, I've got sevral articles that this is very handy to setup. But I find the whole program is completely unstable when using this feature.
I started removing the anchored text frames and applying the spanning columns for the headers, with a paragraph rule above for the background colour.
But if I click around too quickly the whole program freezes and won't budge. I could be selecting an anchored frame to remove it. Or changing paragraph style, or simply opening another panel.
I checked the Task Manager and watched for 15 minutes as InDesign consumed more and more memory - going from 150k to 650k in about 10 minutes.
This happened a bunch of times. I restarted, reset my prefs, exported to idml, and all the other nick nack fixes.
Indesign just keeps bombing out. At which point i have to end the process and then restart indesign and I lose a tiny bit of work.
So frustrated today - over seemingly simple tasks, like selecting something, and the program crashes. This behaviour does not happen when I am not using Span Columns.
Is anyone else having stability issues with CS5 and Spanned Columns?

Thanks Bob
I thought myself that there was a lot going on. And I appreciate that. But thinking about it, the only addition here is the spanning of columns and balanced columns.
I was at one stage incorpartaing detect edges on an image and had to give up on it because there was a 3 minute delay on simple things like cutting the image (as a test).
I just feel that perhaps more could be done in speeding up InDesign.
I've had a hard enough time updating the software, upgrading the hardware is going to be tough.
I don't think Indesign CS5 minimum specs included a supercomputer either?
Check
Intel® Pentium® 4 or AMD Athlon® 64 processor
Check
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended); Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1; or Windows 7
check
1GB of RAM (2GB recommended)
Check
1.6GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
Check
1024x768 display (1280x800 recommended) with 16-bit video card
Check
DVD-ROM drive
Check
Adobe® Flash® Player 10 software required to export SWF files
Check
Broadband Internet connection required for online services*
Far too slow, far too unstable.

Updates for previously paid for apps that address stability issues, bug fixes, other improvements that a customer is entitled to

Why is the policy of Apple to prohibit customers from downloading FREE updates for previously paid for apps that address stability issues, bug fixes and other improvements that a customer is entitled to because the customer does not currently have a credit card on file that they can verify has an available balance??? I can understand it even for free apps or apps on sale or because most of those apps depend on in-app purchases but COME ON. Where is the ethics in that policy? Where is the consumer protection? Especially considering the ONLY marketplace to receive these third party products is through apple. INSANE.
Wasted another 3 or 4 hours today trying to find a solution. I am unable to provide alternative payment method and money is tight for next 2 weeks but this is temporary. It's not as if I will never be purchasing more apps and apple products in the future. I have been a loyal apple customer since the days when Power!ac 9500 retailed for $8,000.00. Another words for a very long time.
Anyone else find this to be a legitimate issue?

I am all for any instance where I am asked to verify my account or Apple ID. The issue is that I am being denied delivery of a beneficial update of a premium, already paid for app... Because I am (at the moment) maxxed out with my credit card I have associated with my Apple ID.
There are four different (full version) paid for apps that just all released major updates. The third party developers offer the updates for free to customers who have purchased the full version of the app and the update includes stability improvements, iOS 7 comparability, bug fixes and expanded functionality.
These are not apps that, in total, cost over $100... And that I use every day.
Never had an issue with being required to verify my account or Apple ID.

N580GTX Twin Frozr II/OC Stability Issues

Hello! I've recently purchased an MSI N580GTX Twin Frozr II/OC and I'm having the much talked about stability issues (CTD, black screens etc.). From what I've read it seems like the best solution is to tweak the voltage in Afterburner until you find a stable solution and then after thorough testing, request a custom BIOS flash.
Is this the best way to go? I'm presently at work so I can't actually get started right away but I'd like to have a game plan in hand for when I get home tonight. Currently my card clock settings should be what they were out of the box although I've also read that some cards didn't come over clocked so what it says on the box might not be exactly what it's running at. I can look up the various card details this evening if it's necessary.
Also I'm not super concerned if I had to down clock or if the card didn't come over clocked. I just want to get it running stably

As per the posting rules:
CPU: Intel Core i7 950 Quad Core Processor LGA1366 3.06GHZ Bloomfield 8MB LGA1366 4.8GT/S
Motherboard: ASUS P6X58D-E X58 ATX LGA1366 3PCI-E16 PCI-E1 2PCI CrossFire SLI USB3.0 SATA 6GB/S Motherboard
Memory: Corsair XMS3 6GB worth
Video Card: MSI GeForce GTX 580 Twin Frozr II OC 800MHZ 1536MB GDDR5
Primary Hard Drive: Corsair Force Series 120GB 2.5IN SATA2 Solid State Disk
Power Supply: Corsair TX850W 850W CMPSU-850TX 12V 70A 24PIN ATX
OS: Windows 7 64 Bit
Nothing is overclocked.
To answer your question about the PSU, while I'm not at home to actually visually inspect the unit, I believe there are 70 Amps on the 12 volt rail.

GS60/GS70-2PC/2PE Stealth/Ghost/Pro stability issues, solution

Hi guys,
If you have GS70 2PC Stealth,GS70 2PE Stealth Pro, GS60 2PC Ghost or GS60 2PE Ghost Pro
and experience stability issue,
flash your vbios as followed:
GS70 2PC Stealth for GTX860M, download vbios package: >>GTX860M<<
GS70 2PE Stealth Pro for GTX870M, download vbios package: >>GTX870M<<
GS60 2PC Ghost for GTX860M, download vbios package: >>GTX860M<<
GS60 2PE Ghost Pro for GTX870M, download vbios package: >>GTX870M<<
Flashing Instructions:
DOS:
guide1[by MSI]: how to: http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
[flashing instruction are included in this SOP pdf]
guide2[Forum guide]: [more clear and detailed]
Create bootable USB key http://www.bay-wolf.com/usbmemstick.htm
once done extract all files from archive file to the USB key,
reboot your notebook enter in BIOS Setup and set boot mode to legacy, then save and exit.
and boot from the USB key [press F11 during BIOS post/logo screen then select your USB key]
when you see A:\ or C:\, type:
cd 860M [ENTER] or cd 870M [ENTER], depend which kind of GPU you are going to flash.
FVBIOS.bat [ENTER]
confirm with "Y" when asked and wait to finish,
then reboot your notebook enter in BIOS setup and set boot mode back to UEFI, then save and exit.
Windows: [Forum guide and the most easy way for flashing]
Extract all files from archive file to some folder.
Then go to Nvidia Control Panel, and select "Adjust image settings with preview":
and leave it in that way [don't close it]
then go back to the folder where you extracted all files,
and double click on FVBIOS.bat
confirm with "Y" when asked and wait to finish,
then reboot your notebook.
NOTE: Make sure that both battery and ac power cord are connected to the notebook before proceed

Quote from: Majed_c on 27-May-14, 14:59:11
Thank you for reply. I think I downloaded the right stuff since the downloaded file's name was <860M>. I will download the vbios via msi gs60 offical page and go by dos mode. But do you recommend to flash it cuz i did run 3d mark 11 for 3-4 hours constantly and found no error to force quit. All I concert is fan speed (min. 3333 rpm for normal use from the DGC interface) and the noise but I am not sure if the new vbios can do anything good about that. Thanks again.
Quote from: Majed_c on 27-May-14, 14:59:11
Thank you for reply. I think I downloaded the right stuff since the downloaded file's name was <860M>
they both are named 860M
You have to click on the hotlinks makred with << >>
to get the right one for your notebook, depend if its for GS60 or GS70 they are different hotlinks provided.
here is direct link to correct vbios for your notebook:
https://forum-en.msi.com/index.php?action=dlattach;topic=180211.0;attach=13131

Major performance Issues after upgrading to 10.9.2

Hi,
I have been having major performance issues almost preventing me from using the computer at times. I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
If any experts or people with ideas for me to speed up the computer, please respond. If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
Here is the info on my system, thank you in advance!!
Hardware Information:
          MacBook Pro (15-inch, Late 2008)
          MacBook Pro - model: MacBookPro5,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
          NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
Disk Information:
          Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    :c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-868
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Fitbit Inc. Fitbit Base Station
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Configuration files:
          /etc/sysctl.conf - Exists
          /etc/hosts - Count: 29
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.LaCie.ScsiType00 (1.2.0) Support
          [not loaded] com.cisco.nke.ipsec (2.0.1) Support
          [not loaded] com.leapfrog.codeless.kext (2) Support
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
          [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
          [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
          [not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
          [not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.adobe.SwitchBoard.plist Support
          [running] com.fitbit.galileod.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
          [running] com.zeobit.MacKeeper.AntiVirus.plist Support
          [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [running] com.brother.LOGINserver.plist Support
          [running] com.google.keystone.agent.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] [email protected]
          [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
          [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
          [running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
          Google Chrome
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.3.1.18536 Support
          Google Earth Web Plug-in: Version: 7.1 Support
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
          OfficeLiveBrowserPlugin: Version: 12.2.9 Support
          AdobePDFViewerNPAPI: Version: 10.1.9 Support
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          DivXBrowserPlugin: Version: 2.0 Support
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
          iPhotoPhotocast: Version: 7.0
          googletalkbrowserplugin: Version: 5.3.1.18536 Support
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewer: Version: 10.1.9 Support
          GarminGpsControl: Version: 2.6.4.0 Release Support
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Dashlane: Version: 2.4.0.55923
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
          Move_Media_Player: Version: npmnqmp 071705000010 Support
          WebEx64: Version: 1.0 - SDK 10.6 Support
          Picasa: Version: 1.0 Support
3rd Party Preference Panes:
          Flash Player Support
          Flip4Mac WMV Support
          Growl Support
Time Machine:
          Skip System Files: NO
          Auto backup: NO - Auto backup turned off
          Time Machine not configured!
Top Processes by CPU:
               3%          WindowServer
               2%          SystemUIServer
               1%          diskimages-helper
               1%          mds
               0%          Google Chrome Helper EH
Top Processes by Memory:
          94 MB          Google Chrome
          59 MB          GoogleSoftwareUpdateDaemon
          57 MB          Google Chrome Helper EH
          52 MB          Google Chrome Helper
          39 MB          Finder
Virtual Memory Information:
          40 MB          Free RAM
          499 MB          Active RAM
          481 MB          Inactive RAM
          465 MB          Wired RAM
          7.33 GB          Page-ins
          502 MB          Page-outs

The performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
MacKeeper should be uninstalled. It does far more harm than good.
Do not install MacKeeper: Apple Support Communities
Uninstall instructions > how to uninstall MacKeeper
249.2 GB (67.82 GB free)
Keep an eye on available disk space.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
You also need to uninstall CleanMyMac > How To Uninstall CleanMyMac
Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
Mac OS X: About background maintenance tasks

WOW! Major video issues here..and everywhere it seems!!

I have the latest iTunes version and runnin Windows Vista. Multiple issues with new 64gb ipod touch..well with itunes:
I can drag and drop new vids, songs pix etc to my touch, but when I go to convert to ipod verison on the vid the screen wither locks up for a minute or so and then lets me choose to convert and this also happens when i go to change the name of the file so they will be in some type of order on my ipod. this wasn't so bad until I starting adding more and more to itunes. I have a 64 gb and still have almost 35 gb available to add, so I have alot but it is far from full.
i am at the point now wheere itunes just locks up as soon as i click on a vid to convert or change the name and have to force quit to get out of it!?!?!? VERY FRUSTRATED since I just spent over 400 bucks on the dame thing and cant use it as is intended!
Searched far into the forums for similar issue but found none. Anyone else out there like this?

OK. I just turned off Genius and itunes is allowing me to go in and delete the larger file before the conversion to ipod version, but it is still very slow when i click on Get Info and Delete. I am afraind to add anything else tho for fear it will only get worse.

Massive stability issues - Disk Utility repair failed, hardware test failed

Hi,
I am having massive stability issues. The installer will not install anything, programs are quitting randomly, and it is getting very annoying!
I read through a lot of posts and I have attempted to:
Repair my disk using the install cd: but that failed.
I did a Hardware test: but i had an error relating to fonts (?), couldn't see anything on the screen and I couldn't do anything.
Is there something else I could do that I haven't tried?
I have had my PB for a little over a year and have had no issues like this before. All of these issues seemed to start when I was playing a game and it suddenly just quit; I then couldn't go back into the game or re-install the game.
Help!!
12" Powerbook G4 1.5Ghz Mac OS X (10.4.6) 768 RAM

Hi, Dan.
You wrote: "Repair my disk using the install cd: but that failed."That's a big problem. You won't get very far until the problems noted by Repair Disk, the function I presume you ran based on your description, are sorted out. It's possible the hard drive has failed.
If the Apple Hardware Test failed, that's another significant problem. If it produces messages you can read that describe the failure, write them down. The machine may need to be serviced by an Apple Authorized Service Provider.
As to your next steps, first run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified to see what's up with your disk and if anything can be done to correct that.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Shared libary gives error in 10.1.0.3 on AIX 5.2. Is it Stability Issue

Hi,
I am trying to make a shared library immediately after the server installation for my 32bit MicroFocus COBOL
application which is running fine on 8.1.7.4
make LIBDIR=lib32 LOC_RTSORA=libmfora.so -f ins_precomp.mk libmfora.so
After that I copy the libmfora.so into $ORACLE_HOME/lib32
later I try to prepare the runtime using
cob32 -vxo rts32 -e "" -L $ORACLE_HOME/lib32 -l mfora $ORACLE_HOME/precomp/lib32/cobsqlintf.o
It creates successfully but when I run it I get this error
> rts32 > err.txt
exec(): 0509-036 Cannot load program rts32 because of the following errors:
0509-130 Symbol resolution failed for /data/oracle/product/10.1.0.3/lib32/libnnz10.so because:
0509-136 Symbol SSL_ALG_ANSIPRNG_BS (number 67) is not exported from
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT1024_WITH_DES_CBC_SHA_CLIENTSIDE_BS (number 68) is not exported f
rom
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT1024_WITH_DES_CBC_SHA_SERVERSIDE_BS (number 69) is not exported f
rom
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA_CLIENTSIDE_BS (number 70) is not exported fr
om
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA_SERVERSIDE_BS (number 71) is not exported fr
om
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA_CLIENTSIDE_BS (number 72) is not exported fro
m
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA_SERVERSIDE_BS (number 73) is not exported fro
m
dependent module rts32.
0509-136 Symbol SSL_ALG_CIPHER_DHE_DSS_WITH_3DES_EDE_CBC_SHA_CLIENTSIDE_BS (number 74) is not exported from
dependent module rts32.
Previously when we run rts32 we should get this message
> rts32
V4.0 revision 0 build 10/10/2 G; 20504. Run Time System RXCAK/AA0/00000S
Without creating the shared library when I just the rtsora32 then also I get this error
> rtsora32
exec(): 0509-036 Cannot load program rtsora32 because of the following errors:
0509-130 Symbol resolution failed for /data/oracle/product/10.1.0.3/lib32/libnnz10.so because:
0509-136 Symbol ssl_GetPeerCertData (number 225) is not exported from
dependent module rtsora32.
0509-136 Symbol ssl_SetCertRef (number 232) is not exported from
dependent module rtsora32.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Somebody help us to solve this issue
Is this because of any stability issues of 10.1.0.3 for AIX
Regards
Ajay

10.1.0.3 is a patchset, not a full release. Patchset are available on metalink , not on OTN.
You can have many databases related to a specific ORACLE_HOME, as long as your system has enough resources to handle these databases. When you create a new database there's no need to stop running database instances.
Installation guide and release notes for 10.2 + certify section of metalink have all informations concerning OS requirements.
Werner

Windows 8 major stability issues

Similar Messages

Maybe you are looking for