Windows 8 not rendering menu

Hi, I've recently upgraded to a Windows 8 laptop, and its not rendering the menu correctly in Firefox and Internet Explorer for one of my sites - www.sawleykitchen.co.uk. Its fine in Chrome and Safari, and in Windows 7 and XP for FF and IE, so I don't really know where to start to sort it out.
Is this a known issue with Windows 8? Does anyone know how to deal with it?
Thanks
SW

Generally speaking IE10 (standard with W8) renders things better than IE8 (XP) or IE9.
There's really no way for us to know what has gone wrong with your page without seeing it. Could you post a link?
Without that, make sure your html is valid, visit http://validator.w3.org and clean out any errors it reports. HTML errors are the source to a lot of display issues between browsers/versions/platforms.

Similar Messages

Why "Lighting Effects.plugin" in FIlter folder does not appear in the Rendering menu?

Photoshop CS5 - I need to work with the "Lighting Effects.plugin".
The plug-in is correctly installed into Adobe Photoshop CS5.1>Plug-ins>Filters but it NOT APPEAR rolling down the RENDERING menu!!
How can I make it visible?
Thank you

That particular filter was not updated/upgraded to 64 bits, therefore you need to launch Photoshop as a 32-bit application.
http://help.adobe.com/en_US/photoshop/cs/using/WS82af097c4236e2eb70aae8412fa75dc285-8000.h tml
In 64-bit versions of Mac OS 10.5 and later, some older, optional plug-ins are available only if Photoshop is running in 32-bit mode:
In the Finder, choose Go > Applications.
Expand the Photoshop folder. Then right-click the Photoshop application icon, and choose Get Info.
In the General section of the Info window, select Open In 32-bit Mode.
Close the Info window, and restart Photoshop.
For more information, see 64-bit operating system benefits and limitations in Photoshop.
Wo Tai Lao Le
我太老了 No connection to Adobe.

If i open a new window instead of a new tab, in the new window does not appear the menu tab

i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.

Do you mean opening a window via the File menu (File > New Window) or do you always want to open links that you click on web pages in a new window?
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Firefox opens but nothing shows/load in the window, not even menu buttons

I open Firefox & a window opens but nothing loads or shows up, not even menu buttons. Occasionally when you blindly click around some menus will open but options beyond that don't produce anything.
I have (not necessarily in this order):
Uninstalled Firefox, deleted all remaining folders, then reinstalled (twice).... didn't help.
Reverted PC back to before Firefox updated... didn't work.
Uninstalled, Debugged my PC, reinstalled.... didn't work.
Turned off firewalls & switched settings to make sure nothing was blocking it from working.... didn't work.
At this point, after surfing Mozilla support site & not finding anyone else having this exact issue I'm not sure what else to do. I love Firefox & want to keep using it (I HATE using Internet Explorer) but the only other solution I can think of is use Google Chrome or IE.
I have Windows 7, use McAfee, & SpyHunter. My laptop is less than 5 y.o. & I keep thing updated reg. so I don't think anything should be out of date or incompatible.
Thanks!

Hello,
Currently in version 33, Firefox has implemented a new, faster way of loading webpages. This new feature is called OMTC. However, there are still some tweaks Mozilla developers are making to this.
There is a known issue that Mozilla works on very hard to fix: if you are experiencing black webpages on some sites, here's what you can do to avoid the problem in the meantime:
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
To disable Hardware Acceleration
* Click the menu button [[Image:New Fx Menu]] and select ''Options''.
* In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
* In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
Now, exit Firefox, wait a few seconds, and then start it normally.
Please let us know if this solves the problem. Engineering is also gathering more information about the issue would request that you fill out [http://www.surveygizmo.com/s3/1851506/1c87a6cf309a this survey]
I should also mention that other users with this problem had an embedded intel hd graphics card with an old driver present. Until Mozilla comes up with a fix, if you want Hardware Acceleration in Firefox, you can try to update your driver through the appropriate link below to see if that helps:
Intel HD 2000/3000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23763
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764
Intel HD 4000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24328
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329
Thank you!

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I have the same problem with the right click and do not have the ask toolbar installed on my system?

The drop-down menu is not rendered properly with iframe where a pdf is embedded

I want to embed a pdf in a webpage, where the drop-down menu needs to be displayed on the top of the pdf. I am using iframe to embed the pdf.
The drop-down menu is not properly rendered (border-radius and box-shadow) in Firefox at http://mysite1.webege.com/test.html.

*[https://bugzilla.mozilla.org/show_bug.cgi?id=779435 bug 779435] - the drop-down menu is not rendered properly with iframe where a pdf is embedded
It is usually best to attach a minimal test case to the bug report.<br />
In that case the code doesn't get lost if the page is removed from the server.

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

Colors not rendered correctly in Photos

The Photos app is not rendering colors correctly. I just downloaded the Loom photo organizer app, which accesses photos from my iPhone Camera Roll. As I was using Loom to scroll through photos on my iPhone Camera Roll I noticed that one particular nature photo displayed vividly, the way I remembered it when the photo was taken a few days ago. The image was of a large grove of golden aspen on a mountainside in Wyoming. I had viewed the same photo using the Photos app and thought the yellows looked muted but assumed that the colors had been affected by the glass car window, through which the original image was taken. Curious, I compared architectural photos I took in Denver earlier today and noticed the same thing. Colors were presented correctly by Loom, but yellows were not expressed correctly in the Photos app. Neither of these photos had been edited in any way and both were taken in natural light. The architectural shot was not taken through glass.
I looked for a color correction or color balance setting on the iPhone, but did not find one. My iPhone dsplay hardware seems fine, again, becuase Loom presented the colors correctly.
I am curious if anybody else has noticed this and also wonder how I might notify Apple.

Now I understand the problem described in my post, above. I don't know how it happened, but a "Fade" filter was being applied to all of my recent photos in the Photos app. When I selected "None" in the filter menu, the yellows were expressed properly. Again, I don't know how this happened. Older photos did not have the Fade filter applied. I'll have to pay attention to this in the future.
But, if you want to reduce the yellow in your outdoor photos, the Fade filter works well.

CS6 Design view not rendering styles, tried typical fixes already

I'm using Dreamweaver CS6 on Windows 7. I hand code everything but like to look in design view from time to time. Everything was working fine until a couple days ago it stopped rendering my css styles and now looks like this (see first image), but an actual preview in the browser looks fine. Under the style rendering menu screen media and display styles ARE currently checked. I have tried turning them off and then back on. I have tried deleting preferences from the registry. My files are linked to a template, I have tried removing the linked style sheet and then adding it again. Oddly I do see css styles in the preview of the actual template file but not the linked files. Any suggestions on what else I can try?

Most likely code related. Assuming your Template.dwt is correctly located inside the Templates folder in your site's root, and your site is properly defined, and the style sheet file is in another folder called Styles, the expected path in your Template.dwt file would be this with leading dots and slash.
Template.dwt
<link rel="stylesheet" type="text/css" href="../Styles/stylesheet.css">
And the child page spawned from that Template and saved to your site root would contain this link path with no leading dots or slash.
childpage.html
<link rel="stylesheet" type="text/css" href="Styles/stylesheet.css">
It goes without saying that DW doesn't adjust link paths for you unless a) your site is properly defined and b) you've saved your child page and named it.
Hope this helps,
Nancy O.

Preview is not rendering fonts well in PDFs

Hi,
For some reason Preview is not rendering fonts well in PDFs. I have created high quality PDFs using two applications (Illustrator CS5 and Numbers '09) and in both cases the fonts are not rendering correctly in Preview. They generally look much less sharp. I am attaching screenshots below, with the original image first and then the PDF in Preview.
When I look at the same PDFs in Acrobat Pro the fonts look fine, so I am presuming that the issue is with Preview. Does anyone have any idea what might be going on?
Thanks,
Nick

It looks like, at least in the Navigation menu, that your using Palatino font, which isn't a web safe font. So Explorer is probably substituting another font when it finds fonts not installed on the viewers computer.
You may be using the default font in a particular iWeb theme. These aren't necessarily web safe fonts.
For your pages to look better on most computers, change all your fonts to web safe fonts which you can find in the "font inspector window" in iWeb. (there is a "font" button on the bottom edge of the main iWeb window) There, you will find different categories of fonts, you want to use any of the fonts listed under "Web" group of fonts.
David

PageFlow Portlet Not Rendering

Hello everybody,
I'm trying to use a page flow as a source for a portlet.
Unfortunately the portlet content is not rendered; instead, just the portlet window with the title bar is present.
No error message is present on either the console or the server log.
The PageFlow is a trivial one -- containing just the begin action and the index.jsp file (faces). I was able to test the pageflow directly from the IDE (choosing the `*Run on Server..*` menu action). The index.jsp content was rendered as expected. But when I tried the URLs for the portal or the portlet, no content was rendered!
I tried the combinations: WebLogic Portal 10.2 + Workspace Studio 1.1 and WebLogicPortal 10.0 + Workshop for Weblogic Platform with the same result.
What is the problem?! Has anyone ever experienced something similar?
(According to the [BEA Portlet Dev docs|http://edocs.bea.com/wlp/docs100/portlets/building.html#wp1062050], using a PageFlow as a source for a portlet is a perfectly good option.)

James thank you for your answer. I did not know about the Portal forum. May I ask the forum's admin to move this thread over there? I don't like to double-post.
Coming back to the issue, I can confirm that indeed this is the most basic example of a portal (created ``by the book`` with a Portal EAR and a Portal Web project). And indeed, I am able to run the portlet directly from within the Workshop; I am also able to run the JPF directly from within the Workshop.
Perhaps a sketch can explain better what I'm experiencing:
Request for `dummy JPF` URL ----------------------> content rendered (as expected)
Request for Portlet with `dummy JPF` URL ----------------------> NO content rendered (+unexpected+)

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Workflow 2.6.4.0.0 configuration problem - Command window does not close

I am trying to install Oracle Workflow 2.6.4.0.0. as part of Warehouse builder using the details mentioned in this link
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson4/etl-mappings.htm
From the Start menu click Programs > Oracle <Database HOME> > Configuration and Migration Tools >
Workflow Configuration Assistant. The Assistant is started.
Accept the default for Install Option
Workflow Account: (Accept the default ) owf_mgr
Workflow Password: owf_mgr
SYS Password : <Enter the SYS account password>
TNS Connect Descriptor: localhost:1521:orcl
Click Submit.
However following this document, the command window did not close, and I did not get any message stating that Workflow Configuration has successfully completed.
The command window displays this message as the final step and does not close-
WorkflowCA: Executing :C:\oracle\product\10.2.0\db_1\jdk\bin\java -jar C:\oracle
\product\10.2.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 admin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWF_MGR
Is this installation complete? How to resolve this?
Please can any one help?
Thanks very much
Allan

I ran into this problem. And it took me while to get it fixed, but It does work.
First the TNS Desc is misleading. One would think that it would be host:port:sid. What it is really looking for is host:port:servicename. But if you want to use the "Change Tablespace" drop down list you need to, enter the sys password, change it to host:port:sid - Then use the drop list. And change it back before you press submit.
The second thing that I found is that it wants to use the SYSTEM tablespace as temporary tablespace. THis is becuase it is looking for a temp tablespace called TEMP. If you look a the line default_temp = SYSTEM. And if you dont supply a tablespace it wanted to change it in the wfsysgnt.sql script in the $OH\wf\sql directory. You would think that what ever the default database tbs and temp tbs is - that owf would use that. No, it wanted to change it. Oracle needs to fix this.
So here is how i fixed it. I had to create a temporary tablespace called TEMP, does not need to be big as I dropped it after it was done. Then i had to modify the wfinstall.csh script and use the install options. Not the /tablespace this option is obayed but it will try to use the SYSTEM as the temp tbs. Here is my example that I appended:
/wfacct "owf_mgr" /wfpasswd "my_owf_mgr_pwd" /debug "true" /tnsConnDesc "my_host_ip:my_port:my_servicename" /syspasswd "change_on_install" /tablespace "OWF_TBS"

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

Windows 8 not rendering menu

Similar Messages

Maybe you are looking for