Windows 8 press and hold slowdown

Hi,
I am using a iiyama touch pc screen on a windows 8 pc. When I 'press and hold'(keep finger/pen in the same place) in my AIR application the application slows down for a second or two. The problem does not occur when i hold the mouse button and it doesn't happen on a windows 7 pc with the same touch screen. I also tried disabeling press and touch right clicking in control panel but that does not work either. Has anyone else experienced this problem and is there a solution?
My guess is that it is caused by the windows 8 press and touch gesture, but there is no way to disable it in windows. Is there a way to disable gestures and other touch functionality in flash?

Jeff-P wrote:
I just tested this on my touchscreen laptop and got a similar behavior. Windows doesn't seem to be registering the left click when you touch the screen until you release. My guess is that this is related to the press+hold for right click functionality on Windows. When I touch and hold for over a second, I get a right click, but when I touch and hold for a shorter time, I get a left click that only registers when I take my finger off. This is consistent with the way that the Windows UI handles touch as well (test the start button for an example).
Interestingly, if I change the mechanical action of the LabVIEW boolean to 'Switch Unit Released' I can't actually toggle the button ever because the press and hold does not register as a left click, and eventually registers as a right click.
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments | Certified LabVIEW Architect
Actually, this is expected behavior. Try clicking a button on any Windows app, then, while holding down the button, move off of it. The button does not register as pressed. This feature has saved me any number of times.
edit:
Or do you mean it doesn't even depress the button?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Similar Messages

Press and hold on a Surface pro touch screen

Hi,
I am having some problems with my Surface Pro, trying to control a relay 'press-and-hold'. When I connect a mouse to the Tablet, Windows registers the left mouse up and down events perfectly, allowing the user to control the relay exactly the way I intended, but when I use the touch screen with either the stylus pen or my finger it only seems to press the LabVIEW on release.
Does anyone have a solution for this problem?
Chris

Jeff-P wrote:
I just tested this on my touchscreen laptop and got a similar behavior. Windows doesn't seem to be registering the left click when you touch the screen until you release. My guess is that this is related to the press+hold for right click functionality on Windows. When I touch and hold for over a second, I get a right click, but when I touch and hold for a shorter time, I get a left click that only registers when I take my finger off. This is consistent with the way that the Windows UI handles touch as well (test the start button for an example).
Interestingly, if I change the mechanical action of the LabVIEW boolean to 'Switch Unit Released' I can't actually toggle the button ever because the press and hold does not register as a left click, and eventually registers as a right click.
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments | Certified LabVIEW Architect
Actually, this is expected behavior. Try clicking a button on any Windows app, then, while holding down the button, move off of it. The button does not register as pressed. This feature has saved me any number of times.
edit:
Or do you mean it doesn't even depress the button?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Not responding before press and hold any key

I have to press and hold any key on my blackberry 8520 before it response. This started after downloading some app from the appworld. If I leave the phone for one minute idle and gets a call, I have to press and hold the send key for about 30 seconds before I can pick the call. I hv perfomed the security wipe for more than 3 times and still the problem exist. Need some help pls

Hi and Welcome to the Community!
It sounds like those apps may have corrupted the OS, and therefore an OS reload may be required. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4623 How do I close apps that are running in the background. If you double click button you used to be able to press and hold for the "x" to come up to allow you to close, but now I can't .

How do I close apps that are running in the background. You used to double press the button, and then press and hold to allow the "x" to come up, so you could close them down.

Close all apps in multi-task window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

Mac OSX's "press and hold" shortcut to special characters won't work in Firefox.

Need to use accented special characters (áéö...) to write in my mother tongue. On Mac OS X 10.8.3 this can be done by simply pressing and holding a key and then selecting the right character from a list that shows up. It functions well in Safari and in Chrome but no success in Firefox 21.0. This makes Firefox a no-go although otherwise a great browser.

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

The utility's menu isn't coming up when I press and hold r and command after restarting

I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.

Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

How to disable press and hold?

Hello,
Press and hold in non-active regions in FlashPlayer 6 in the
Windows Mobile environment results in a right-click action, which
brings up a context menu. I would like to disable this feature. It
seems that the capability is controlled in FlashPlayer rather than
in Windows Mobile, as press and hold in any other application does
not result in a right-click action, only in Flash.
I suppose there are ways around it, like making the entire
background a "button" that doesn't do anything, but would prefer
something cleaner.
Any ideas?
Thanks!

you havent said what phone you are using
you can do it on the N80 via the multimedia key config settings (i have mine set to launch LCG Jukebox instead)
but i believe on some other models such as N73 it is fixedMessage Edited by cracker1979 on 07-Jan-2007
10:12 PM
N80 Generic v4.0623.0.42, N80 Orange v4.0623.0.41, 6288 Generic v5.92, SE K750i

Everytime i press and hold my left click mouse button, it automically highlights everything from that point to the top of the page

Every time i press and hold my left click mouse button, it atomically highlights everything from that point to the top of the page. Also note, if i'm holding the left click on the scroll bar it goes back to the initial location even when i try to drag it up or down.
Opened up internet explorer and the problem does not occur there.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''

My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan

HT1430 My iPhone 4 will not power on. When connected to iTunes it shows battery at 100%. Pressing and holding the sleep/wake button does nothing; just a black screen.

My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?

Only way is to bring it to the Apple Store and use the warranty if it hasn't expired

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

You can't delete any of the Apple built-in apps e.g. Music, App Store, Game Centre etc. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

I erased all content and settings from i phone because my dad gave it to me i press and hold both buttons i conected it to the itunes but it tells me its not available and my iphone doesnt open what shall i do?

I erased all content and settings from i phone because my dad gave it to me i press and hold both buttons i conected it to the itunes but it tells me its not available and my iphone doesnt open what shall i do?

Do you have a SIM in the phone? A SIM is required to activate the phone.
If you do, ask your dad if the phone was jailbroken or hacked to unlock it.

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

Thanks for your response and good luck wishes, I suspect I will need them!
In principle, I agree re: the manufacturer's warranty. However, I am pretty upset that this is now my second iPod to develop a critical fault within weeks of the warranty expiring, and frankly, it is not unreasonable to expect a state-of-the-art $500 electronic device to last well beyond one year of life.
I agree talking to Apple is not likely to do me any good (the clue is in how impossible they make it to talk to them in the first place) - but that is not necessarily OK. I expect I will have to pay money to get the battery replaced - again, not OK (full stop - but especially given the cost of the device and the money I have spent with Apple). Yes, the batteries have a limited lifespan, but it should last longer than this (and surely, I should notice a gradual decline in its functionality, not an instant stop).
I will try Deggie's suggestion (see my reply post), but probably won't hold my breath (think I have already done this). I probably will have to get the new battery - and probably under my own steam. It is a principle at stake and I feel I should be able to let Apple know how I'm feeling - and am frustrated that they make this virtually impossible. It sends the very clear message that they are not interested in listening to their customers.

I used to be able to get ö by pressing and holding the o key.

Maverick version OS X 10.9.4 (13E28)
Up until this morning, 16 Sept, on any word processor (Pages, Word for Mac, PlainText, Notes) I could access European alternatives to each of the vowels of the alphabet by pressing and holding the letter key.
Now all I get is a repeat of the letter.
The question is: how do I return to the pre Sept 16 situation?

Thank you all for your responses.
I am most definitely the non-technical user compared to you guys. I’m never going to be in the position of responding with confidence to anyone requesting help in this forums; you folk may therefore have this information at your finger-tips.
One of the best features of mac os x that I discovered only purchasing the iMac in 2013 was feature that by pressing and holding down a letter key a list of alternative language options appears. This feature disappeared on Sept 16. At the same time the outcomes of pressing and holding a combination of keys (most used Shift + Down Arrow) or a single key also disappeared. The most obvious of the single key outcomes was the continuous movement of the cursor along a line when Left or Right arrow was pressed and held down.
Initially, the replacement outcome was if I pressed and held a letter key I simply got multiple repetitions of the same letter. Not finding my problem in the support forums I posed the initial problem.
While this solved the problems of multiple repetitions it did not solve anything else.
I finally sought help from Apple Support Chat over a 36 hour period.
1st senior supervisor & 1st Solution
2nd senior supervisor confirms 2nd solution (and confirms if 2nd solution does not work there is a 3rd solution).
These two senior supervisors were intrigued by the problem and both shared the same view of problem and the same solution.
PROBLEM - there is no location within Mavericks OS X that enables anyone to either switch-on or switch-off the outcomes of pressing and holding a key or a combination of keys. Consequently there is no easy quick fix.
Since neither senior supervisor had, previously, been faced with this particular problem they could only project ideas for causes, software incompatibility or a serious hardware problem, which could only be fully resolved by returning my iMac to Apple ReSeller (3rd solution). Having no desire to entrust my iMac to the slightly dubious Estonian postal service, doing this would require two return journeys (taking and collecting 10 days later) involving 4x6 hours of motorway driving plus a 4x3 hour ferry and costs in excess of €350.
SOLUTION - 3 were suggested to be tried in sequence if the first did not work. Reinstall Mavericks using instructions found at http://support.apple.com/kb/ph13871; (ii) Erase and Install Mavericks using instructions found at http://support.apple.com/kb/PH14243 and (iii) return to Reseller.
As had no effect, I attempted (ii) which involved a lot of hassle, but has returned all the functions of the keys.
The downside is that I still don’t know what caused the problem. The only app I downloaded to the iMac on the September 15th was a Garmin Fitness app. “Once bitten twice shy” I shall download the Garmin Fitness app to my Airbook and will keep you folks informed…….

Windows 8 press and hold slowdown

Similar Messages

Maybe you are looking for