Windows 8 printing

I have read and watched a lot of reviews and printing hasn't been mentioned. Do anyone know if theirs yet integrated printing in windows 8. This is standard with email function on other platforms.

Hi Bogoa,
Are you referring to the ability to say, use Bluetooth, to send photos to a compatible printer which will then print out your photos? There may be some apps in the Store which could allow you to upload your photos to the cloud and you could print from there. Or Hewlett Packard, Canon or EPSON may deliver apps for the Windows Phone 8 that enable Bluetooth printing for their compatible printers. As such, your best bet would be to check with printer companies as to what their intentions on developing for Windows Phone 8 may be...as WP8 does not have integrated printing applications that other manufacturers such as Samsung may have, sorry.
Hope this helps.

Similar Messages

How to Suppress the POP UP window for Print out Device

Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.

On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device.

Windows network printing to HP Laserjet 4L

Recently got our first mac, an iBook runing OSX 4.4 Tiger. A great part of the deal was that we could get a free printer, a Deskjet 5900 series to replace our old color printer which was not working so well. We have a home network with 2 desktops both running Windows 2000, a printer connected to each one, a linksys modem connected to cable and a linksys router connecting them all via ethernet cable, as well as wireless capacity for a couple of other notebooks (another WIndows 2000 and a powerbook).
When we bought the iBook a concern was that it would work okay with the Windows network. The internet connection and file sharing is working fine, but we still can't print.
After talking with various support people at Apple and HP, we were assured that there was no way to print through the Windows computers, and that the best option was to get either a print server, or preferably a router with a printer port. Furthermore, they said the 5900 series doesn't work through the network at all, and can only be connected directly to the mac. So our only bet was the other printer, an old reliable Laserjet 4L.
So I invested time and money in a SMC Barricade router with a parallel connection for the Laserjet 4L. (It predates USB) This is daisy-chained to the Linksys router. via a crossover patch cord going from LAN to LAN port on the 2 routers. The iBook is now connected to the new SMC router, and the 2 Windows 2000 desktops to the Linksys, and everything talks to everything else, the 2 Windows computers print fine through the router, but I still can't figure how to set up the printer on the mac. I installed Gimp-Print, which has a driver for the 4L, but can't figure out how to get to the printer. The SMC people told me to put in the IP address of the router, which worked for the Windows computers. However, when I tried typing that address on the iBook as HP IP Printing, which seems the best option, it just says Not Found.
I talked to Apple again, and this time they told me I'm up **** creek bacause it's a parallel printer and they are no longer supported. Period. But he said I could try this forum, and if anyone could help me it would be you, gentle readers.
Anyone have any suggestions at all?
iBook Mac OS X (10.4.4) Windows network user

Success! I updated the OS X from 4.4 to 4.5, but the Printer Browser window looked the same. It took a support person to tell me the obvious, that I had to press the little oval button on the top right to expand the window. I then tried installing with CUPS+Gimp-Print, and default queue, but when I tried to print, the print queue stopped itself. I deleted that, and reinstalled, using Foomatic/hpijs, and the LP queue, and that is working fine! So I don't know if the problem was the driver, or, more likely, that the default queue wasn't found.
As for the DeskJet5940, I am now using a Deskjet5850 foomatic/hpijs driver, and so far it is working too. I was able to print a web page with some graphics. I imagine the printer model is too new to have a 3rd party driver yet--maybe one will come out in a while.
But the embarassment of driver riches has given me a new, much less urgent question. I now have 3 drivers available for the LaserJet 4L, the CUPS+Gimp-Print, the vanilla Gimp-Print (both v5.0.0-beta2), and the Foomatic/hpijs. Does anyone have an opinion about which of these is more likely to work well? Does my particular setup (printer attached to parallel port of the router) make any difference?
iBook Mac OS X (10.4.4) Windows network user

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing to shared windows xp printer from 10.5.8

I AM TRYING TO PRINT TO A SHARED WINDOWS XP PRINTER FROM 10.5.8 AND HAVE TO RE AUTHENTICATE THE USER AND PASSWORD EACH TIME I PRINT. THIS GETS TO BE TIRESOME WHEN OU PRINT 50 TIMES A DAY. TRIED DELETING THE KEYCHAIN, NO HELP. HAVE SET ALL PERMISSIONS ON THE XP BOX AND THE ONES THAT I KNOW ABOUT ON THE MAC. ANOTHER SUGGESTION WAS TO PRINT TO SPOOL FOLDERS ON THE PC. WHEN I TRIED THAT THE PRINTER SHOWED UP ON THE MAC AS A SHARED DRIVE. ANY SUGGESTIONS WILL BE GRATEFULLY ACCEPTED.

Hello jackc5417 and welcome to Apple Discussions.
You could look at creating a queue with the user name and password entered. This can be done via the Advanced menu of the Add printer.
To make the Advanced menu option appear on Mac OS X 10.5, you have to customize the printer browser toolbar. After selecting to add a printer queue, hold down the Control key and click in the toolbar. In the new menu that appears, select Customize Toolbar. This will make a sheet appear and permit you to drag the Advanced icon up to the toolbar to add it. Now you can use the following steps.
1. Click on Advanced.
2. Select ‘Windows'
3. For Device Name, enter a name for the printer you are creating.
4. For the Device URI, after the text “smb://” enter a user account that is registered on the Windows computer sharing the printer followed by a colon. Then without any spaces enter the account’s password followed by the @ symbol. Now enter the computer name (or IP address) of the Windows computer, a forward slash, and the printer share name.
For example:
smb://username:password@computername/printersharename
5. For the Printer Using menu, select the appropriate PPD.
6. Click Add to finish
BTW - try not to use CAPS lock in future. It makes it hard to read...
Pahu

Print to windows attached printer

Hi!
I am facing a "small" problem here in my home lan. I have to computers connected. One is running Windows XP and has attached an Epson Stylous C60 printer. The other is running redhat 9 (2.4.8-20smp)
I have managed to make thw two boxes "talk" via samba.
$ rpm -q samba
samba-2.2.7a-7.9.0
I can read/write from one box to another without problem. The windows can see the linux through the lan and the linux can see the windous after mounting the share. But the thing I cannot do is print from linux to the windows attached printer.
First of all I checked if the printer is supported redhat and I found out that it is.
http://www.linuxprinting.org/show_p...pson-Stylus_C60
So this eliminates the obvious question: Can you print with this printer from linux in the first place?
I've read many things about how to print to windows, like
http://www.idevelopment.info/data/U...tLinuxSMB.shtml
http://www.redhat.com/docs/manuals/...mb-printer.html
as well as many stuff from google search But there is no way I can solve my problem. I follow the instructions but still I can't print
I also tried cups
$ rpm -q cups
cups-1.1.17-13
But there too I faced the same proble.
Can someone help me out here because I need that printer. I attach my smb.conf file. Any other information I will be standing by to submit.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = mshome
# server string is the equivalent of the NT Description field
server string = samba server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 0
# Security mode. Most people will want user level security. See
# security_level.txt for details.
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %nn *Retype*new*password* %nn *passwd:*all*authentication*tokens*updated*successfully*
# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.
pam password change = yes
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes
obey pam restrictions = yes
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \%LProfiles%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
username map = /etc/samba/smbusers
guest ok = yes
guest account = axelman
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writeable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
; map to guest = bad user
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp/samba
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[axelman]
path = /home/axelman
writeable = yes
guest ok = yes
thanx to all
axelmang

This easy to follow procedure (5 web pages with screen shots) worked for MacBook Pro 10.6.8 via Wireless-N to Windows 7 Home Premium SP1 x64 using USB Cable to HP Officejet 7210 All-in-One. This configuration had worked with Windows XP.
http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
Error messages encountered prior to using the above procedure:
authorization required
Backend returned status 2 (authentication required)
Cannot find server
Communication Failure: The computer is no longer able to communicate with your printer
cupsdAuthorize: pam_authenticate() returned 9
getaddrinfo: <windows printserver> nodename nor servname provided, or not known
Job held for authentication
On Hold (Authorization required)
pam_authenticate() returned 9 (authentication error)!
Printer Paused
Printer stopped due to backend errors
Session setup failed: NT_STATUS_INVALID_PARAMETER
snmpInk: Unknown host (<windows printserver>)
This computer seems to have a working Internet connection. but we cannot find "<windows printserver>" You may have typed the address incorrectly.
Tree connect failed (NT_STATUS_ACCESS_DENIED)
Unable to locate printer
Unable to locate printer Unknown host
Unknown host

I'm trying to print from a full size 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer?

I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file. I only want to print an 8 1/2 x 11 portion, in scale. How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

You might be better off contacting an AutoCAD support group.

Can Reader pick up the Default Page Size of a printer that is not the Windows Default Printer?

We have a web based application that generates PDF documents via Crystal Reports.
We are using Adobe Reader 8
The PDF pages are displayed within an Internet Explorer window where the the users then print the document.
The application is designed so the user only gets one chance to print the document (ie they cant come back and change printer settings if they happen to print the document out incorrectly)
The document needs to be printed on A3 paper, full duplex.
We have a printer set-up decidated to the printing of the documents generated by this application. The default page size of this printer is set of A3.
If we set this dedicated printer as the Windows Default Printer we have no problems at all. The default page size (A3) is picked up and the document is printed correctly.
If any other printer is set as the Windows Default Printer (eg one that has a default page size of A4), the users must obviously select the correct printer from the Print Dialogue Box -however when the user selects the dedicated A3 printer, the page size remains as A4 (page size of the Windows Default Printer). This means the user must remember to change the paper size to A3 each time.
Out users find IT a struggle at the best of times - anything that makes the process simpler is very welcomed!
Is there a way to ensure the default page size of the printer is respected when that printer is not the Windows Default Printer?
Thanks!

No.

How to get windows username printed on each page irrespective of application? we have cm6030f.

How to get windows username printed on each page irrespective of application? we have HP CM6030F.

Hi,
Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Also, you could see this page
http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
Q: I am a student. Can I apply for a pass?
A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Accessing Windows shared printer, no GIMP driver for Canon iP3000. Options?

I checked a few pages worth of threads but couldn't find a solution to my problem.
Finally accessing my Windows shared printer. I have a Canon iP3000 and it doesn't print when I use the generic driver. I tried selecting the GIMP "Canon BJC 3000" driver but the prints end up shrunken to about a quarter of the paper size (8.5"x11"), my paper was set up and configured correctly. Any options for correcting this?
I had planned on connecting the printer to my MacBook Pro but all the support I could find was for sharing from Windows, so if anyone knows a good resource for such a setup, that'd help too.

There are new versions of Gimp-Print, now called Gutenprint, coming out on a regular basis. Check if the latest has your model:
http://gimp-print.sourceforge.net/MacOSX.php3
To share from a Mac:
http://www.ifelix.co.uk/tech/3012.html

Use of windows default printer causes labels to be mis-printed.

I am printing a crystal report via the vb.net viewer to an avery dennison label printer.
I have configured the size of the label for the avery dennison into the Seagull driver that exists on the workstation where I am printing the report.
The crystal report has been configured to use the printer name and page size from the driver on the workstation.
When I make the Avery Dennison printer on the workstation the windows default printer and print the report to the Avery Dennison printer, the label prints out correctly.
When I make another printer on the workstation the windows default printer and print the label to the Avery Dennison printer, the label prints across two labels.
Any ideas?

Hi Praveen,
#No of Copies# in transaction /SCWM/PRWO6 is not actual number of copies . This is more an index how the number of copies is determined . Please use F4 on this field and you will see that index 2 means "Number of Copies" = 1.
In Transaction /SCWM/ 60000431 you need to actual number of copies for your document. But this number is only taken if you set the index in /SCWM/PRWO6 to "0".
I hope this information helps you.
Sabya

Acrobat 8 install forced change to different Windows Default Printer

Immediately after installing Adobe 8 Pro my Windows default printer changed and I can't get it to stay set to the default that I want. Everytime I restart my computer the Windows default printer is set to the one it changed to after installing Acrobat 8 (not the one I had set as default the last time I used the computer).
Also, everytime I restart my computer I get a "Please Wait while Adobe Acrobat Installs..." dialog. I also get this dialog the first time I open any MS Office application following every computer restart.
Win XP

Aandi - I am going through the Windows Start button... Printers and Faxes, then right-clicking on the printer that I want as my default printer and selecting 'Set as Default Printer'. It remains the default printer until I restart my computer. Then the printer that the Acrobat installation set as the default comes back as the default.

How to add a Windows shared printer

I was doing everything that Article: HT3049 was saying but i still couldn't print with my windows shared printer from my mac , finally I found out another way, so for those of you who that having problem you can do the steps below:
On the Windows 7 PC
1. Go to Control Panel
2. Select "Programs and Features" panel
3. Click "Turn Windows Features on or off"
4. Click on the "LPD Print Service". Under "Print and Document Services"
5. Ensure printer(s) are shared
On the Mac
1. Open "System Preferences" - "Print & Fax"
2. Click "+" to add a printer
3. Right hand button tool bar to customize and add "Advanced" button
4. Select "Advanced"
5. In the "Type:" field select "LPD/LPR Host or Printer"
6. In the "URL:" field enter lpd://IPserver/PrinterShareName; (e.g., lpd://192.168.1.102/samsung)
Using lpd://ServeName/PrinterShareName does not work, the IP address must replace ServerName
The IP address is the address of your PC, the one assigned by your router
7. Click the "Add" button
enjoy!:)

I had to download the driver for my printer. Depending on the printer you will have to go to that site. In the search engine type 'mac os driver (model printer). I have a dell wireless. After that I went to printers/faxes and hit the + sign and my dell printer was there to add. Hope this helps a bit. I actually just did it today.

Can't see windows shared printer

Hi,
Just joined a small company that is all windows based. So if I want to keep using my Mac, I need to resolve a couple important issues. One of them is printing to the office printers. The office is set up to use a PC running windows 2000 connected to the printers in question. The printers are all shared by this PC and everyone accesses them through.
The problem I am having is that when I go through the printer utility and select more printers, I can find and connect to the designated PC for printing. However, after connecting to it, there are no printers visible to select for setting up.
The printers that are highest on my list are an HP1300 and HP5000. I believe the HP1300 is connected via USB.
I saw the post mentioning potential problems with the drivers and to get hpijs.
But is that the reason I can't even see the shared printers?

drmoque wrote:
...But is that the reason I can't even see the shared printers?
No. While you will need the hpijs, Foomatic RIP and Ghostscript software to print to the USB shared printer, they are not needed to see the shared printer.
When you opened (double-clicked) the Windows 2000 print server, were you prompted to authenticate? If you didn't authenticate, then this could explain why the shared printers are not being displayed, as you are probably connecting as a guest and this account has no access to the printers. You will need to ask for an account to use, or have one created for you so that you can see the printers.
The other thing you may need to check is if the 2000 PC is part of a domain rather than a workgroup. If it is a domain, then the account name that you use to authenticate to it has to include the domain name, such as domain\accountname.

Printing to a windows shared printer (Epson Photo 1400) on a AD Network

Looking for help with printing to a windows shared printer but I believe I need instructions for a domain rather than a workgroups??? Trying to print to a windows shared Epson Stylus Photo 1400 from a Mac running OS 10.4.11. Sharing works fine to other PC's an a network using active directory. (there is no workgroup, and I guess there can't be in the way the network is administered) The "address" used on another pc to print to the shared printer is \\111408nw.

Hi dlori, and a warm welcome to the forums!
I think these may help...
http://discussions.apple.com/thread.jspa?messageID=4776616
http://blog.case.edu/djc6/2005/06/22/printingfrom_os_x_104_to_windows_printer_on_activedirectory
http://www.afp548.com/article.php?story=20070108171607985

Windows 8 printing

Similar Messages

Maybe you are looking for