Windows 8 Pro configure Bluetooth GPS to work with Windows 8 internal maps programs

How do you setup/configure a bluetooth GPS to work with windows 8 internal map programs. So far i,ve been able to connect the GPS device to the tablet, but it only works with Microsoft legacy map programs using the COM ports ie 3,7.

Hi,
The devices used in Windows Store Apps must have special drivers insintalled.
See the following document.
http://msdn.microsoft.com/en-us/library/windows/hardware/hh454840(v=vs.85).aspx
Juke Chou
TechNet Community Support

Similar Messages

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

Can I still download Adobe 9 Pro Extended and will it work with Windows 8 64 bit?

It is not clear what application you mean when you say Adobe 9 Pro Extended, so it ois not certain if it is available for you to download. If you can diownload it, it will only be valid for a 30 day trial unless you already own it and have a serial number to activate the trial with.
You can search the following site and see if you can find the trial version to download... this site is the only likely place you might find the software available for download.
If you find it there, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/tag/ddl

Bluetooth is not working with Windows 8.1 on U410 touch

Hello,
I have a Lenovo U410 touch, and i just upgraded to windows 8.1 though the store.
And the bluetooth is not working at all, it says that the PC is searching for Bluetooth devices. While everything was working great before.
I have updated all the drivers from the Lenovo websites and still nothing is working
I went to device manager and checked under bluetooth: Intel (R) Centrino Wireless Bluettoth 4.0 + High Speed. Microsoft Bluettoth Enumator, Microsoft Bluetooth LE enumarator all 3 are up to date.
Then I went to network connections (from the start) and i have a red cross under Bluettoth network connection 2 and says not connected.
My windows is also up to date
I really think gooing back to Windows 8 since i cannot listen to my music on my beatbox and connect to my phone and tablet,
Thank you for your help

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Unable to get Saffire Pro 26 audio interface to work with Windows 8.1

Can anybody help with compatibility issues between Windows 8.1 (64 bit) and Focusrite Saffire PRO 26 audio interface? I'm using a Firewire PCIe Card. Focusrite registration page pointed me to an installer called saffire-pro-2.61.exe. This installer times
out on a page called 'Installing device driver (1 of 2) waiting for the Saffire PRO to be connected to the computer (The Saffire Pro device is connected and a powered up and appears in the Device Manager as a device called Focusrite SAFFIRE_PRO26 which is
listed under the Other devices section of Device Manager with a yellow exclamation mark which appears to be a catch 22 (after all I'm trying to install the drivers). No answer from Focusrite support (due to holidays). Many thanks for any help you can give
(particularly if someone knows that it should work!).

Brilliant. This has moved me on. I wasn't impressed when Focusrite registration presented me with drivers from 2011. You'll probably tell me finding the latest drivers is easy but somehow I failed to find anything in my panic. I have a second issue
now (Pro Tools 11.2.2 could not initialize the Saffire) but your response seems to have solved the first issue. Thanks!

Configure Oracle BBDD to work with Windows KDC

Hi all,
I'm having problems in configure Oracle 11g running in Windows 2003 Server R2 with another W2003 Server R2 where AD is located and also KDC server.
The problem is when I try to retrieve TG initial ticket using okinit.
Output of okinit after enter password for PRINCIPAL is:
okinit: Improper format of configuration file
My krb5.conf is:
[libdefaults]
default_realm = DM.LOCAL
[realms]
PERICO.DM.LOCAL = {
kdc = perico.DM.local
[domain_realm]
.dm.local = DM.LOCAL
dm.local = DM.LOCAL
where DM.local is DOMAIN name and perico.DM.local is the host with AD and KDC server.
I can resolve full names of kdc server or BBDD server by .../etc/hosts and Net Manager has the rights values in KERBEROS5 parameters.
I don't know what or where to look for solving the problem.
any Idea?
Thanks in advance.

If kinit is working correctly, try the workaround for bug 9450931: add "kerberos5" as service alias for krb5.
Another tell-tale sign is the fact you upgraded a perfectly working 10G install to 11G, and this broke.

Hi thinking of buying a new PC and upgrading to windows 8. Will Photoshop CS3 work with windows 8

I am thinking of only going as high as Photoshop CS5 or 6. '
I already have Photoshop CS3, and am more than satisfied with this, and would be delighted if this can be installed on a computer using windows 8
Thank you
Barbara

I heard you could only use from CS5 upwards, so didn’t know of CS 3 would work – guess it is worth a try though
Thanks

Does Ipod not work with Windows 2000 NT?

I keep getting an error when trying to install the Ipod CD... I tried downloading Itunes, but I am not sure how to get my Ipod to show up on it... any suggestions how to fix this?

No it does not work with NT. the Ipod Tunes software supplied along with the ipod is only compatible with Windows XP. But is does work with Windows 2000

Does GarageBand work with Windows XP????

I have Windows XP. Will Garage Band work with windows??????

Sorry crap link - try this http://www.gear4music.com/MusicSoftware/Sony/Acid_Music_Studio6.07.html
iMac 17" Mac OS X (10.4.7)

HP LaserJet 6L won't work with Windows 8

Good afternoon all,
Right I inherited this great little printer last year, it worked great with Windows 7 but now it wont work with Windows 8, it appears to be installed and the drivers are all up to date but when I use it to print a pile of random characters come out on the pages and doesn't stop. I've reinstalled it and installed it again and again every different way but it just doesn't work and HP says that it is compatible (there is a green tick beside it somewhere on your website). Could it be that I'm using a cable that is parallel at the printer end and USB at the computer end that is at fault?
James.

I had the same problem, and fixed it.
Control Panel - Devices and Printers
Click on "Add a Printer"
Click on "The printer that I want isn't listed"
For USB connection, choose "Add a local printer or network printer with manual settings"
Pick an existing port. I use a cable that has LPT port at one end, USB at the other end. So my choice is USB001 (Virtual printer port for USB)
Now you see the list of manufacturers and models. Before doing anything, click on "Windows Update" and let it run (takes a few minutes)
Once the update is complete and you're back to the list of manufacturers and models, select HP as the model, and select HP LaserJet 6L as the printer. Without Windows Update, it will only show "HP LaserJet 6L PS Class Driver", which causes the problem. Stick to "HP LaserJet 6L"
The rest is straight forward. Print a test page and check if it comes out right. Good luck!!

Networked Officejet Pro K850 not working with WIndows 7

At work, I have a networked Officejet Pro K850 and I can not get it to work with WIndows 7 Pro 32-bit OS. I have read several forums on this problem and tried some of the suggestions and nothing works. My print server is running WIndows 2000 Server. Not sure what else to do so I am writing this post hoping someone has a solution to this problem. After I installed the printer is has a green checkmark by the printer icon, but when i do a test print page I get the 'document failed to print' error. I have also tried the Windows update and used one of the printers on the listing to no avail.
I downloaded the Universal PCL 6 driver and installed it on the WIndows 7 PC. I ran the utility and it recognized and successfully installed an HP Lasertjet 4350Dtn, I say successfully because I was able to print a test page. HELP! Thanks in advance

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

S10-3t bluetooth and wireless not working with windows 8

S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian

Will Acrobat Pro 7 Work with Windows 7?    It did NOT with Vista.

I create fillable forms using Pro and have never had any problem getting Acrobat Pro to install the PDF driver with Windows 6 or XP.
However, I have tried every "solution" offered by Adobe to get the driver to install on my new notebook which runs on Vista. I have also downloaded and installed both Vista service packs. The driver still will not install,
Without the converter driver, I cannot do a substantial portion of my work on the new computer.
I was going to upgrade to Acrobat Pro 8 but found out from other irritated users that Pro 8 also failed to install the driver using Vista.
   Am I the only customer who thinks there is really shoddy support from Adobe on this issue?
I am willing to upgrade to Windows 7. However, if Pro fails to work with Windows 7 like it did with Vista then the upgrade would be another waste of my money. If we cannot depend on Acrobat Pro to work on the Windows platform, my company (5000+ employees) is going to have to find other software.
Has anyone had success getting Acrobat Pro (7, 8, OR 9) to install the PDF converter driver with Windows 7 ?
Thanks!

What is the "method" to get around issues with Windows 7 64bit? My XP machine failed and I've bought a new one running Windows 7 64bit. I'm trying to get a credit card statement, but I can't read it because the downloaded Acrobat 9 I'm trying to install - won't install. Something about it not being "compatible" with Windows Vista and 7 operating 64bit. How long has Vista been around?? - at least a couple years. Why hasn't Acrobat been able to get "compatable" in all this time?? Right now it seems I'm screwed because I unknowiing bought a 64bit machine.
I've been told at work that the answer is to get some sort of similated 32bit operation going that Acrobat can handle. Can you please tell me how to do that? I'd really appreciate your help.

Does bluetooth on an ipad work with windows 7

I just got an iPad and I'm having trouble with pairing it with my Windows 7 64bit computer. The two will recognize each other but windows says it can't find the bluetooth driver for the device. I've searched online and in apple support but can't find a driver. I've gone to the windows support site and can't get a straight answer. The last post that I read said that apple has made it so the bluetooth won't work with a windows pc. Does anybody know if this is true and if it is not, does anybody know how I can get the bluetooth driver for windows? Thanks for your help.
Mike

Thet bluetooth isn't meant to be for data transfer. It's mostly meant to keyboards and headphones.

HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer. I have been using Windows Vista, but recently upgraded to Windows 8.1. I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1. I have attempted to find a driver upgrade for the B500, but there does not appear to be one available. I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one.
Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

Hi @Raider83,
Welcome to the HP Forums!
I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode. It is not guaranteed to work, but it is worth a try!
If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Windows 8 Pro configure Bluetooth GPS to work with Windows 8 internal maps programs

Similar Messages

Maybe you are looking for