Windows 8 Pro WSUS error 800B0001

I am running WSUS on Server 2008 R2 x64.  I have Windows XP, Vista, and 7 clients connecting to it without any problems.  I recently installed Windows 8 Pro from my TechNet subscription on one of our workstations and I'm getting
an error 800B0001 when I try to run Windows Update.  I have tried the fix found at
http://support.microsoft.com/kb/2720211 already with no luck.  When I'm adding a new system to our network, I use a registry entry to enter the settings and another one to remove them
when I'm finished (I have a computer repair shop so we see lots of computers come through). 
Here's the registry key used to instruct the system to look to the WSUS server for updates:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
"WUServer"="http://192.168.5.23"
"WUStatusServer"="http://192.168.5.23"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"UseWUServer"=dword:00000001
"IncludeRecommendedUpdates"=dword:00000001
"NoAutoUpdate"=dword:00000000
"AUOptions"=dword:00000002
"ScheduledInstallDay"=dword:00000000
"ScheduledInstallTime"=dword:00000010
Any ideas?  Thanks!

Here is the solution that worked for me.  The only issue I had was that my Windows 8 client still errored (different error than the 800B0001 error I had earlier) the first time I told it look for updates.  I had it check for updates a second
time and everything worked as expected.  It was provided on another thread that I was following as well:
KB2734608
Issues that are fixed
This update lets servers that are running Windows Server Update Services (WSUS) 3.2 provide updates to computers that are running Windows 8 or Windows Server 2012.
Additionally, the following issues are fixed by this update:
Installation of update 2720211 may fail if Service Pack 2 was previously uninstalled and then reinstalled.
After you install update 2720221, health monitoring may fail if the WSUS server is configured to use SSL.
Additionally, this update includes the following fixes:
2530678
(http://support.microsoft.com/kb/2530678/ )
System Center Update Publisher does not publish customized updates to a computer if WSUS 3.0 SP2 and the .NET Framework 4 are installed
2530709
(http://support.microsoft.com/kb/2530709/ )
"Metadata only" updates cannot be expired or revised in WSUS 3.0 SP2
2720211
(http://support.microsoft.com/kb/2720211/ )
An update for Windows Server Update Services 3.0 Service Pack 2 is available
Note Update 2720211 strengthens the WSUS communication channels.
Notes
After you install this update, Windows Update Agent (WUA) will be upgraded automatically.
WSUS must be in a known, good working state for this update to work. WSUS must be able to synchronize from Microsoft Update, and clients must be able to communicate with the WSUS server. For more information about how to perform basic health checks on a
WSUS server, go to the following Microsoft TechNet websites:
Reindex the WSUS Database
(http://technet.microsoft.com/en-us/library/dd939795(v=ws.10))
Use the Server Cleanup Wizard
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Product Manager, SolarWinds
Microsoft MVP - Software Distribution (2005-2012)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin

Similar Messages

  • Windows Update Loop - Win 7 Pro - x64 :: Error 80071A91

    Hi, I've been referred to this forum by the Microsoft community from this post: answers.microsoft.com  /en-us/windows/forum/windows_7-system/windows-update-loop-win-7-pro-x64-error-80071a91/b17c5bc5-7977-4f8b-9b45-ecb265886381 (same as below)
    Any assistance is appreciated. dave_ned at hotmail.com.
    Hi,
    "There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again"
    I've got the error (80071A91) that others have experiences while trying windows update and for the life of me I cannot get the updates to install.
    Looking for the past 4 hours via Google, trying different recommended things and still no luck
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-f964-4376-bfab-2f29ea127c6a
    # SFC /scannow causes the "repair status message" and asks for reboot.
    I've downloaded fix-it, tried booting into a system repair/restore disk using command line to run
    #sfc /scannow /offline....
    using the dispart to LIST VOLUMES  (based on this http://mikemstech.blogspot.com.au/2011/12/how-to-perform-offline-system-integrity.html )
    I've tried #fsutils resourse set autorevert=true (or something, can't find the exact post as I've rebooted so many times)
    I've tried dismc.exe (or similar without success)
    Basically I'm stuck with these updates (~10 of them) always sitting there downloading, installing every time I shut down the PC.
    Running a system repair disk created in windows still does not allow #sfc /scannow....
    My Last system restore was 04/08/14 and I cannot even restore the system to this point as the restore fails and asks to remove itself once I restart the system.
    Details:
    OEM version of windows purchased legally and genuine microsoft logo in system dashboard.
    Intel Core I5 -3330
    16GB RAM
    Windows 7 Pro - 64bit OS
    Service pack 1
    **NOTE** I have the C drive hooked up in RAID 0. Two(2) * 60GB SSD disks in RAID 0 used as C: via BIOS RAID
    Secondary storage disk a D:
    Been working and updating fine for the past 5-6 months.
    I have the Optical drive setup as O: and a Daemon tools virtual drive as drive E:
    While running DISKPART and using LIST VOLUME I see this:
    currently the system seems to have lost all update history
    Any information or help on this is appreciated. I don't want to reformat and reinstall, I don't really want to 'repair' and wipe my current software installation so I'm hoping there is a way.
    Anyway I can get the 'pending state' removed.?
    Thanks in advance
    David

    Hi, I've rebooted into Repair mode (Console), (because repair said windows is installed on E:) run dism.exe /image:E:\ /cleanup-image /revertpendingactions
    This gave a message about small scratch space but did say something out a fix. Upon reboot into safemode with console I received the same message 
    "C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    There is a system repair pending which requires reboot to complete.  Restart Windows and run sfc again."
    I then rebooted and tried SCF again, no luck... Same message, same updates still sitting there.
    Partition info: (as mentioned earlier C is in RAID 0 with 2 SSD disks)
    DISKPART> list volume
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      Volume 0     O                       DVD-ROM         0 B  No Media
      Volume 1     E                       DVD-ROM         0 B  No Media
      Volume 2         System Rese  NTFS   Partition    100 MB  Healthy    System
      Volume 3     C                NTFS   Partition    111 GB  Healthy    Boot
      Volume 4     D   GB320        NTFS   Partition    298 GB  Healthy

  • Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4

    Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
    Question: We are experiencing some major errors with printing to our Epson Stylus 9800 Pro. Some of our large files are spooling about 16K, then crashing Photoshop. Sometimes we are getting partial prints (the left most 3-4 inches of print, or the file starting to print about 1/2 way into the file itself), sometimes it just spools for a few minutes, then stops, with nothing coming from the printer at all.
    At Epson's request, we have tried the following:
    reinstalling Windows 7 print driver
    Reinstalling Adobe CS 4
    Installed NEW NIC in printer
    Installed new network line to printer
    Installed new main board on printer
    Printed from a PC directly connected to printer via USB and crossover cable
    This issue is very bizarre in that it is random and sporatic. Same file will cause one of the above errors, then, another attempt to print same file will be successful. We have several Windows 7 machines that get the issue, while several Windows XP machines are fine. Epson instructed us to install the newest (win7) driver on the XP machines, issue then affects XP machines. Uninstalling new driver and re-installing old driver on XP machines resolves issue on XP machines.
    Is this an issue with the Epson driver? CS4 on Windows 7? Or some other malady?
    When Photoshop crashes, the following error log is created: Log Name:      Application
    Source:        Application Error
    Date:          10/6/2010 1:31:16 PM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      _PCNAME_._OUR_DOMAIN_.com
    Description:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: E_FJBLDBE.DLL, version: 0.1.1.7, time stamp: 0x469dea6c
    Exception code: 0xc0000005
    Fault offset: 0x0001c9ba
    Faulting process id: 0x1cf8
    Faulting application start time: 0x01cb657c010cac1c
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL
    Report Id: 85870535-d16f-11df-b849-406186f3bc8f
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-10-06T17:31:16.000000000Z" />
        <EventRecordID>5497</EventRecordID>
        <Channel>Application</Channel>
        <Computer>_PCNAME_._OUR_DOMAIN_.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>11.0.2.0</Data>
        <Data>4bf2d4f6</Data>
        <Data>E_FJBLDBE.DLL</Data>
        <Data>0.1.1.7</Data>
        <Data>469dea6c</Data>
        <Data>c0000005</Data>
        <Data>0001c9ba</Data>
        <Data>1cf8</Data>
        <Data>01cb657c010cac1c</Data>
        <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
        <Data>C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL</Data>
        <Data>85870535-d16f-11df-b849-406186f3bc8f</Data>
      </EventData>
    </Event>

    Giving that a go.
    Thanks!

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • Windows 8.1 error message

    i'm having sony notebook with i3,8gb ram,4gb graphics 320gb hdd....in the last month i'm using 8.1,due to some reasons i uninstalled 8.1 and came back to factory setting...and now i'm unable to install 8.1 in my note
    it is showing an error message
    something happened
    setup has failed to validate the product key

    Hi,
    Let’s get things clear:
    How do you install Windows 8.1 on your notebook?
    Which edition are you going to install, Windows 8.1 or Windows Pro or Enterprise?
    Which phase goes wrong during installation?
    Alex Zhao
    TechNet Community Support

  • Windows 8 - Activation Error: 0xC004F074 and 4 things that do not fix it

    OK, bought a used laptop with dual boot Win7x64 / Win8Prox64 in Feb. 2013. Windows 8 booted up and ran just fine for the first six months. I don't
    know if it had anything to do with it, but I installed Office 13 in the Windows 8 partition not long ago, and it seems that after that Windows 8 kept issuing pleas to "activate windows" (but no complaints from Office 13, which is a HUP installation
    from my work). On the bottom right side of the screen it now says Windows Pro 8 Build 9200, and on top of that is the light gray plea to (re) activate Windows. There have been no hardware changes to the laptop. 
    Finally got annoyed enough this weekend to try to resolve it, without success. Here are the four methods I tried, and the results:
    Attempt 1:
    go to Control Panel > search Windows Activation > choose Windows Activation
    Response:
    Windows isn’t activated
    Windows can’t be activated right now. Try activating Windows later. If this issue persists, contact your system administrator or technical support department for assistance.
    [Activate button]
    Activation details
    Error Code:
    0xC004F074
    The Software Licensing Service reported that the product could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
    Pressing the [Activate] button gets you the same response over and over.
    Attempt 2:
    Open the command window as an administrator -
    CMD (run as administrator) slmgr.vbs –ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (where
    this is the 25 character key for Windows 8 Pro)
    Response:
    Installed product key XXXXX-XXXXX-XXXXX-XXXXX-XXXXX successfully.
    Next -
    CMD (run as administrator) slmgr.vbs –ato
    Response:
    Activating Windows(R), Professional edition
    Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
    Attempt 3:
    Open the command window as an administrator -
    CMD (run as administrator) SLUI 3
    Response:
    Enter a product key to activate Windows
    (enter product key)
    Your product key works! Continue when you’re ready
    press [Activate]
    Get same 0xC004F074 error code
    Attempt 4:
    Open the command window as an administrator - 
    CMD (run as administrator) SLUI 4
    Response:
    Find available phone numbers for activation
    Click the nearest location:
    Afghanistan
    [Afghanistan is greyed out and you cannot select any other country]
    Click on Next, and get a non-toll free number in Afghanistan to call.
    Attempt 5:
    CMD (run as admistrator) sfc /scannow
    No errors reported.
    PLEASE Tell Me WHAT CAN I DO KNOW.
    IT always shutdown automatically sometimes after that.
    PLEASE REPLY ASAP
    thanks,

    Hi,
    It sounds like your computer is trying to access a KMS server for some reason. Are you sure you installed a MAK-key on your computer?
    For further troubleshooting regarding eventual KMS-issues, please give us (masked of course) the output from the command 'SLMGR.vbs /dlv'
    MCT | MCSE: Private Cloud/Server, Desktop Infrastructure

  • Potential Windows Update database error detected 0x80070490

    This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center.  If I click next it reports the errors have been fixed.  However if I run it again it reports exactly the same errors.
    After searching the Internet I have found that several users have reported having this issue.  As result of the aforementioned search I have tried the following:
    1) Run the Fixit tool for Windows 8.1 located at:
    http://support.microsoft.com/kb/971058/en-us.
    2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
    http://support.microsoft.com/kb/947821/en-us.
    3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
    4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
    5) Restarted Windows 8.1.
    6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
    7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
    8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
    to the internet.  I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
    Any suggestions that will help fix this issue will be of great help.

    Did anyone ever find an actual fix for this problem?  I have a very similar problem.  I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter.  It
    continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well.  However, each time
    I run the troubleshooter it finds the same issues.  I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
    for my apps it says it's having problems finding them and to try later.  If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
    I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message.  I have tried it with my Kaspersky
    Internet Security 2015 turned completely off.  I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed.  After running it again, there were no errors.  I have no other problems with anything
    else (that I know of on my machine).  It is an Asus Q400A and came with Windows 8.0.  I ran all the updates and then upgraded to 8.1 through the MS store without issue.  I have installed all updates since upgrading to 8.1 and have absolutely
    no problem running ANY updates, but can't seem to access the store no matter what I try.
    If anyone has found a solution to this I'd appreciate your input.  Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
    editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
    Windows and all the updates....which still doesn't resolve the problem for many!  I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation.  I've wasted more time chasing this issue
    down than I all the time I've spent actually using the Mac without even a hitch!
    Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!!

  • Windows Pro 8.1 Hyper-V enabled - cannot connect to Virtual Machines

    I'm running Windows Pro 8.1. Virtualization is enabled in BIOS. Account is in Admin, Hyper-V, RDP groups. I open Hyper-V manager. Create a new Virtual Switch (internal) and name it. Then create a new virtual machine - name it, place it in a folder under
    C:, Specify Generation (tried both 1 and 2), startup memory 512mb not dynamic, Lan- select the virtual switch created earlier, create an vhdx hard disk, and install the O.S. from an ISO on C. Creates the new VM under Virtual Machines.
    I select the new VM, click connect, then start. A window opens with the new VM on server and says it's connecting to it and it's status is Running. In the Hyper-V manager  in the New Virtual Machine pane (bottom pane) it shows a image that
    appears to have a login screen. The VM window that displays the "Connection to" eventually throws an error : Virtual machine connection: Cannot connect to the virtual machine, Try to connect again. contact your admin, Try again etc. selecting connect
    eventually errors out with check integration services etc. I've read the logs, there are no errors. When I try to shut down or turn off the vm it doesn't respond. I've configured this before on different boxes. It's the work environment for the MCSA 70-462
    training kit Preparation. any direction would be greatly appreciated.

    That is correct.  This has been well documented.
    The WMI namespace changed.  2008 and 2008 R2 now of the v1 virtualization namespace.  2012 knows of both v1 and v2.  And 2012 R2 only knows the v2 virtualization namespace.
    That said, there is more to this.
    2008 management console only knows 2008 features.  So if you connect it to a 2012 server to manage the 2012 server, you cannot manage any of the features released with 2008 R2 nor 2012.
    So, take this second point, mix it with the first point and I recommend that your management server / client release matches the release of the Server you are managing.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

    using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro  10.6.8)

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • Adobe Acrobat 9 Pro runtime Error!

    I have an issues with Adobe Acrobat 9 Pro runtime Error!
    Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error.....etc
    on window xp 32bit with Service Pack3!
    Could anyone please help.

    Was it running in the past? Also, Reader and Acrobat are different products and you mentioned them as though you think they are the same. If you can open the package, select Help>Repair. Follow up with Help>Updates.

  • Adobe Acrobat 9 Pro Reinstallation Errors

    My hard drive crashed on my computer (replaced with new one) and I had to reinstall my Adobe CS5 and Adobe Acrobat 9 Pro. All of CS5 reinstalled fine. However, everytime I reinstall Adobe Acrobat 9 Pro, it errors every time. It will install, but whenever you open the program, it immediately stops working and errors out saying Adobe Acrobat 9.3 stopped working. Windows cannot find a solution and then closes. 
    It never gives me the chance to enter my product key or register the product. I went to the Adobe Product page and tried downloading and installing all the updates, but nothing works. No matter what I do it closes right away. Any ideas?
    My PC is on Windows 7 - I had to initially install Acrobat on this PC when I got it a year or so ago and it worked fine. Not sure what's changed.
    Thanks.

    I just tried reinstalling it - again, it wasnt giving me the option to register it or anything. Would close the minute I opened Acrobat.
    So I opened the Acrobat Distiller that installed with Acrobat and that asked me to accept the agreement and register the product. Once I did that - Acrobat started working again!

  • WSUS - errors 12072 10032 and 364

    Hi
    My WSUS server (6.3.9600.16384) on Windows 2012 standard isn't OK, whereas it works fine on April.
    - 5 clients are in the console (I use GPO to deploy them and it's OK. On WSUS serveer, I see that this stations needs updates but on this PC ,Windows Update say that nothing is available to update.
    - synchronisations (link in the console) is OK with Microsoft but all packages in the WSUS section are with a red cross and when I try to download again it's KO
    I Have 3 errors in windows eventviewer :
    - First error : id 12072 
    The WSUS Content Directory is not accessible 
    System.Net.WebException: The remote server returned an error: (404) Internal Server Error. : (404) unreachable [Introuvable].
       à System.Net.HttpWebRequest.GetResponse()
       à Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.CheckContentDirWebAccess(EventLoggingType type, HealthEventLogger logger)
    - Second error : id 10032 
    The server is failing to download some updates.
    -Third error : id 364
    Content file download failed.
    Reason: Value does not fall within the expected range.  
    Source file : /d/msdownload/update/software/defu/2014/06/outlfltr-x-none_8fe59a8ce9e0525d17149882944f243bfd4465a7.cab 
    Destination file : D:WsusContent\A7\8FE59A8CE9E0525D17149882944F243BFD4465A7.cab
    It's seems that a "\" is missing inthe Destination file, non ? For information, my WSUS installation is on D: with 3 sub directory : Shares, UpdateServicesPackages, WSUSContent. I have no wsus proxy configured and my wsus server is able to update
    itself on Windows Update site. Only 1 GB is use on D: wich have 20 GB, subdirectory in wsuscontent are empty. 
    Below, ClientDiag.exe on 2 computers Windows 7 32 bits : 
    WSUS Client Diagnostics Tool
    Checking Machine State
            Checking for admin rights to run tool . . . . . . . . . PASS
            Automatic Updates Service is running. . . . . . . . . . PASS
            Background Intelligent Transfer Service is running. . . PASS
            Wuaueng.dll version 7.6.7600.320. . . . . . . . . . . . PASS
                    This version is WSUS 2.0
    Checking AU Settings
            AU Option is 4: Scheduled Install . . . . . . . . . . . PASS
                    Option is from Policy settings
    Checking Proxy Configuration
            Checking for winhttp local machine Proxy settings . . . PASS
                    Winhttp local machine access type
                            <Direct Connection>
                    Winhttp local machine Proxy. . . . . . . . . .  NONE
                    Winhttp local machine ProxyBypass. . . . . . .  NONE
            Checking User IE Proxy settings . . . . . . . . . . . . PASS
                    User IE Proxy. . . . . . . . . . . . . . . . .  NONE
                    User IE ProxyByPass. . . . . . . . . . . . . .  NONE
                    User IE AutoConfig URL Proxy . . . . . . . . .  NONE
                    User IE AutoDetect
                    AutoDetect in use
    Checking Connection to WSUS/SUS Server
                    WUServer = http://srv-tech.cavimac.com:8530
                    WUStatusServer = http://srv-tech.cavimac.com:8530
            UseWuServer is enabled. . . . . . . . . . . . . . . . . PASS
            Connection to server. . . . . . . . . . . . . . . . . . PASS
    WinHttpDownloadFileToMemory(szURLDest, NULL, 0, NULL, NULL, NULL, &downloadBuffe
    r) failed with hr=0x80190194
    No Error description could be found
    Press Enter to Complete
    WsusDebugTool.exe doesn't run : I have a pop-up "this application could not be started, Do you want to view information about this issue ?" and after the micorosoft link is about "shim error" but it's for windows 7 or win8.
    Below an extract of C:\Windows\WindowsUpdate.log
    2014-08-06 08:49:23:519
    788 b84
    AU ## START ##  AU: Search for updates
    2014-08-06 08:49:23:519
    788 b84
    AU #########
    2014-08-06 08:49:23:550
    788 b84
    SLS Retrieving SLS response from server using ETAG "hKnjujWw8qNxmyhQqGtJKf9fHd1QtUzyEI6M7V4AWQw=_1440"...
    2014-08-06 08:49:23:550
    788 b84
    SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=18&L=fr-FR&P=&PT=0x7&WUA=7.9.9600.17195
    2014-08-06 08:49:24:269
    788 b84
    EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
    2014-08-06 08:49:24:269
    788 b84
    SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
    2014-08-06 08:49:24:269
    788 b84
    Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
    2014-08-06 08:49:24:269
    788 b84
    Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
    2014-08-06 08:49:24:269
    788 b84
    IdleTmr WU operation (CSearchCall::Init ID 2) started; operation # 125; does use network; is not at background priority
    2014-08-06 08:49:24:269
    788 b84
    IdleTmr Incremented idle timer priority operation counter to 2
    2014-08-06 08:49:24:269
    788 b84
    Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 2]
    2014-08-06 08:49:24:269
    788 b84
    AU <<## SUBMITTED ## AU: Search for updates  [CallId = {9A0739E4-F42E-4671-BCC2-67A991052727} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-08-06 08:49:24:269
    788 fbc
    Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 2]
    2014-08-06 08:49:24:269
    788 fbc
    Agent *************
    2014-08-06 08:49:24:269
    788 fbc
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 2]
    2014-08-06 08:49:24:269
    788 fbc
    Agent *********
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * Online = Yes; Ignore download priority = No
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
    and RebootRequired=1"
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * Search Scope = {Machine & All Users}
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * Caller SID for Applicability: S-1-5-18
    2014-08-06 08:49:24:269
    788 fbc
    Agent  * RegisterService is set
    2014-08-06 08:49:24:269
    788 fbc
    SLS Retrieving SLS response from server using ETAG "hKnjujWw8qNxmyhQqGtJKf9fHd1QtUzyEI6M7V4AWQw=_1440"...
    2014-08-06 08:49:24:269
    788 fbc
    SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=18&L=fr-FR&P=&PT=0x7&WUA=7.9.9600.17195
    2014-08-06 08:49:24:394
    788 fbc
    EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
    2014-08-06 08:49:24:394
    788 fbc
    SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
    2014-08-06 08:49:24:394
    788 fbc
    Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
    2014-08-06 08:49:24:394
    788 fbc
    Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
    2014-08-06 08:49:24:394
    788 fbc
    SLS Retrieving SLS response from server using ETAG "hKnjujWw8qNxmyhQqGtJKf9fHd1QtUzyEI6M7V4AWQw=_1440"...
    2014-08-06 08:49:24:394
    788 fbc
    SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=18&L=fr-FR&P=&PT=0x7&WUA=7.9.9600.17195
    2014-08-06 08:49:24:534
    788 fbc
    EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "7971f918-a847-4430-9279-4a52d1efe18d"
    2014-08-06 08:49:24:534
    788 fbc
    EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-08-06 08:49:24:550
    788 fbc
    Setup Checking for agent SelfUpdate
    2014-08-06 08:49:24:550
    788 fbc
    Setup Client version: Core: 7.9.9600.17195  Aux: 7.9.9600.17195
    2014-08-06 08:49:24:550
    788 fbc
    EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
    2014-08-06 08:49:25:925
    788 fbc
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
    2014-08-06 08:49:25:925
    788 fbc
    Misc Microsoft signed: NA
    2014-08-06 08:49:25:925
    788 fbc
    Misc Infrastructure signed: Yes
    2014-08-06 08:49:25:925
    788 fbc
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3421.tmp with dwProvFlags 0x00000080:
    2014-08-06 08:49:25:925
    788 fbc
    Misc Microsoft signed: NA
    2014-08-06 08:49:25:925
    788 fbc
    Misc Infrastructure signed: Yes
    2014-08-06 08:49:25:941
    788 fbc
    Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
    2014-08-06 08:49:25:941
    788 fbc
    Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
    2014-08-06 08:49:25:941
    788 fbc
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-08-06 08:49:26:066
    788 fbc
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-08-06 08:49:26:066
    788 fbc
    PT  + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
    2014-08-06 08:49:26:066
    788 fbc
    Agent Reading cached app categories using lifetime 604800 seconds
    2014-08-06 08:49:26:066
    788 fbc
    Agent Read 0 cached app categories
    2014-08-06 08:49:26:066
    788 fbc
    Agent SyncUpdates adding 0 visited app categories
    2014-08-06 08:49:27:613
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 305; does use network; is at background priority
    2014-08-06 08:49:31:903
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 305) stopped; does use network; is at background priority
    2014-08-06 08:49:31:903
    788 fbc
    Agent Reading cached app categories using lifetime 604800 seconds
    2014-08-06 08:49:31:903
    788 fbc
    Agent Read 0 cached app categories
    2014-08-06 08:49:31:903
    788 fbc
    Agent SyncUpdates adding 0 visited app categories
    2014-08-06 08:49:31:935
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 306; does use network; is at background priority
    2014-08-06 08:49:32:765
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 306) stopped; does use network; is at background priority
    2014-08-06 08:49:32:765
    788 fbc
    PT  + SyncUpdates round trips: 2
    2014-08-06 08:49:34:555
    788 fbc
    PT +++++++++++  PT: Synchronizing extended update info  +++++++++++
    2014-08-06 08:49:34:555
    788 fbc
    PT  + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
    2014-08-06 08:49:34:555
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::GetExtendedUpdateInfo_WithRecovery) started; operation # 307; does use network; is at background priority
    2014-08-06 08:49:34:664
    788 fbc
    IdleTmr WU operation (CAgentProtocolTalker::GetExtendedUpdateInfo_WithRecovery, operation # 307) stopped; does use network; is at background priority
    2014-08-06 08:49:34:821
    788 fbc
    Agent Update {FF434E78-8B6A-4860-BD0F-4AC472E29063}.101 is pruned out due to potential supersedence
    2014-08-06 08:49:34:821
    788 fbc
    Agent Update {566B95D4-66F6-47BA-8953-02CAEA29022C}.101 is pruned out due to potential supersedence
    2014-08-06 08:49:34:821
    788 fbc
    Agent Update {B932D155-4C7F-4CBC-8527-D5DF17B0A220}.101 is pruned out due to potential supersedence
    2014-08-06 08:49:34:821
    788 fbc
    Agent Update {B6C0F3C6-C368-4A76-A3BF-BE068C7358F0}.101 is pruned out due to potential supersedence
    2014-08-06 08:49:34:821
    788 fbc
    Agent  * Added update {0C028E91-F849-476D-94CD-C5CD4CCBAD75}.200 to search result
    2014-08-06 08:49:34:821
    788 fbc
    Agent  * Found 1 updates and 72 categories in search; evaluated appl. rules of 1225 out of 1811 deployed entities
    2014-08-06 08:49:34:821
    788 fbc
    Agent *********
    2014-08-06 08:49:34:821
    788 fbc
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 2]
    2014-08-06 08:49:34:821
    788 fbc
    Agent *************
    2014-08-06 08:49:34:821
    788 fbc
    IdleTmr WU operation (CSearchCall::Init ID 2, operation # 125) stopped; does use network; is not at background priority
    2014-08-06 08:49:34:821
    788 fbc
    IdleTmr Decremented idle timer priority operation counter to 1
    2014-08-06 08:49:34:821
    788 fe4
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {9A0739E4-F42E-4671-BCC2-67A991052727} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-08-06 08:49:34:821
    788 fe4
    AU  # 1 updates detected
    2014-08-06 08:49:34:821
    788 fe4
    AU #########
    2014-08-06 08:49:34:821
    788 fe4
    AU ##  END  ##  AU: Search for updates  [CallId = {9A0739E4-F42E-4671-BCC2-67A991052727} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2014-08-06 08:49:34:821
    788 fe4
    AU #############
    2014-08-06 08:49:34:821
    788 fe4
    AU All AU searches complete.
    2014-08-06 08:49:34:821
    788 fe4
    AU AU setting next detection timeout to 2014-08-07 04:31:04
    2014-08-06 08:49:34:821
    788 fe4
    AU Adding timer: 
    2014-08-06 08:49:34:821
    788 fe4
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-08-07 04:31:04, not idle-only, not network-only
    2014-08-06 08:49:34:821
    788 fe4
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-08-06 08:49:34:821
    788 fe4
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-08-06 08:49:39:834
    788 77c
    Report REPORT EVENT: {4C7A04F7-AE64-4069-887B-DE495C5E13CE}
    2014-08-06 08:49:34:821+0200 1
    147 [AGENT_DETECTION_FINISHED] 101
    {00000000-0000-0000-0000-000000000000}  0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 1 updates.
    2014-08-06 08:49:39:834
    788 77c
    Report CWERReporter finished handling 2 events. (00000000)
    2014-08-06 08:50:45:480
    788 6f0
    IdleTmr Decremented idle timer priority operation counter to 0
    2014-08-06 08:58:30:327
    788 b84
    AU User login event timer expired for session id: 2.
    2014-08-06 08:58:30:327
    788 b84
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-08-06 08:58:30:327
    788 b84
    AU #############
    2014-08-06 08:58:30:327
    788 b84
    AU ## START ##  AU: Install updates
    2014-08-06 08:58:30:327
    788 b84
    AU #########
    2014-08-06 08:58:30:327
    788 b84
    AU  # Initiating scheduled install
    2014-08-06 08:58:30:343
    788 b84
    AU WARNING: There are no approved updates to install
    2014-08-06 08:58:30:343
    788 b84
    AU  # Exit code = 0x8024000C
    2014-08-06 08:58:30:343
    788 b84
    AU #########
    2014-08-06 08:58:30:343
    788 b84
    AU ##  END  ##  AU: Install updates
    2014-08-06 08:58:30:343
    788 b84
    AU #############
    2014-08-06 08:58:38:841
    788 77c
    EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-08-06 08:58:38:841
    788 77c
    EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Reporting URL: "http://statsfe2.update.microsoft.com/ReportingWebService/ReportingWebService.asmx"
    2014-08-06 08:58:38:841
    788 77c
    Report OpenReportingWebServiceConnection, reporting URL = http://statsfe2.update.microsoft.com/ReportingWebService/ReportingWebService.asmx
    2014-08-06 08:58:38:841
    788 77c
    IdleTmr WU operation (CLegacyEventUploader::HandleEvents) started; operation # 494; does use network; is at background priority
    2014-08-06 08:58:38:841
    788 77c
    Report Uploading 1 events using cached cookie.
    2014-08-06 08:58:39:108
    788 77c
    Report Reporter successfully uploaded 1 events.
    2014-08-06 08:58:39:108
    788 77c
    IdleTmr WU operation (CLegacyEventUploader::HandleEvents, operation # 494) stopped; does use network; is at background priority
    2014-08-06 09:06:39:117
    788 77c
    Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
    2014-08-06 09:08:39:114
    788 ea8
    AU Earliest future timer found: 
    2014-08-06 09:08:39:114
    788 ea8
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-08-07 04:31:04, not idle-only, not network-only
    2014-08-06 09:08:40:115
    788 b84
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-08-06 09:08:40:132
    788 b84
    WuTask Uninit WU Task Manager
    2014-08-06 09:08:40:153
    788 b84
    AU Earliest future timer found: 
    2014-08-06 09:08:40:153
    788 b84
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-08-07 04:31:04, not idle-only, not network-only
    2014-08-06 09:08:40:200
    788 b84
    AU Earliest future timer found: 
    2014-08-06 09:08:40:200
    788 b84
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-08-07 04:31:04, not idle-only, not network-only
    2014-08-06 09:08:40:310
    788 b84
    Service *********
    2014-08-06 09:08:40:310
    788 b84
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    And the wsus server configuration :

    OK thanks Guy, it's strange because this server has well ran in April I think
    What do you do to reinstall ? you rebuild the server (create a new VM) or you delete and reinstall the role wsus ?
    For information, our VM is a windows 2012 standard edition on hyper-v 2012 R3

  • Premiere Pro Installation errors! Help me!

    I disables my firewall, Kaspersky , I'm the administrator of my computer and I tryed "Run As Administrator". but that didn't help.
    I'm using a 32-bit Windows 7.
    The installation stops very close to the start and says Installation Failed
    The error code:
    Adobe Premiere Pro CS4
    Error:
    Error 1625. This installation is forbidden by system policy.  Contact your system administrator.

    Hi,
    I'm sorry you're running into problems installing Premiere.  Would you mind reposting this issue over on the Premiere forums?
    Thanks,
    Chris

  • Adobe Pro XI - Error 16.

    Adobe Pro XI - Error 16.   Have Windows 7, uninstalled/reinstalled, used the Adobe cleaner, still getting error.

    Still receiving the error.  I even deleted the users computer profile.

  • Windows 8.1 error 1053

    Hello,
    Im french. Mon pc au démarrage met 2 heures sur le bureau.
    Un message d'erreur apparait :
    Control service "japan message" : 1053
    I don't know japan message
    Thks for help

    Welcome to the Lenovo Community !
    I'm sure sure why you have a Japanese error message, but the fix for a Windows Control Service Error 1053 is to update Net Framework 1.1 to the latest service pack.  Please review the Microsoft article below for a fix.......
    https://support.microsoft.com/en-us/kb/839174
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Maybe you are looking for