Windows 8 problems 2575 series all in one

Recently I bought a new laptop which runs Windows 8(64-bit) and when I tried to install the software required to run my printer (2575 series all in one) I couldn't because the software wasn't compatible with windows 8.
Is there any way for me to install a driver, an emulator or some kind of software that would allow me to accses my printer?
Edit: sorry, accidentaly double posted somehow.

The HP 2575 is compatible with Windows 8
Go to this site, Drivers and Software, Select your OS and download the Full Feature Software and Drivers.
http://support.hp.com/us-en/product/HP-Photosmart-2570-All-in-One-Printer-series/441247/model/441248...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

Problems Installing J4680C all in one

I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
This is the screenshot I took:

Hi @Mezron,
I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
Here is a example using McAffee Security Center.
Disable Real-Time Scanning and the Firewall:
Open your McAfee product located down by your clock and right click the M.
Click Navigation and select Real-Time Scanning .
Click Turn Off .
Click Navigation and select Firewall .
Click Turn Off .
Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
Close your McAfee product. The status should show that you are not protected.
Then follow this document to register Windows components, msconfig and reinstall the printer software again.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 Driver fro HP All-in-One - 20-2210x

Hi everyone,
is there any way to download driver for Windows 7 x64 on HP All in one 20-2210x.
As on their website its only supported by Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=7308...
I dont want to use windows 8 at this time.
Many thanks

Hello @Oszh,
I understand that you are looking for Windows 7 64-bit drivers for your HP All-in-One - 20-2210x. Unfortunately, your computer at this time only has Windows 8.1 drivers. If you move down to Windows 7 you may lose some functionality as you will be stuck using the basic Windows 7 drivers if there are any for your computer.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

HT1338 is there a driver for Lexmark X1100 Series All-in-one?

Is there a driver for Lexmark X1100 Series All-in-One ?

Hi,
Might try this...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-53118-1 &lc=en&cc=us&dlc=en&product=1146331&os=219&lang=en

Installation problems Officejet 5610 All in One on Windows 8.1 64 bit

I have a HP Officejet 5610 All-in-One printer that I have had for a few years. It has worked well on the old computer but the computer died. I purchased a new Dell Laptop with the Windows 8.1 64 bit operating system. The printer works fine but the scanner won't work since there is no software in the computer. I went to the HP Support website and tried to down;oad the drivers/software. The download failed 6 times. i finally tried anothe computer and after 4 failures. I was able to down load all 402MB of software. I saved it to a portable USD drive and returned to the Dell. I started the install and got to the begin installation screen. Unfortunately, right after it finished extracting the files. I got a pop up dialog box with the error message "System cannot find file specified". I went to HP Support and the website said to search the Windows file and remane the file extensions on all hpoins*.dat and hpwins*.dat files to .old file extensions. Unfortunately, there aren't any and they don't have any other suggestions.
Does anyone have any ideas?

Hi d-hammer,
Welcome to the HP forums!
I'm sorry to hear you've been having issues getting your Officejet 5610 installed on your new Windoes 8.1 computer but I'm hoping I can help you out
On your new Win 8.1 computer do you have an anti-virus program? Anything like McAffee, Norton, BitDefender, Avast, or anything like that? If you do, it's likely that the firewall within that anti-virus program is blocking part of the install. If you have any anti-virus on your computer you'll need to disable the firewall and the real time scanning within before you try to run the installation again. If you're not sure how, contact the anti-virus company and they should be able to let you know how to do those steps.
Let me know how that goes for your and we will go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

LENOVO C SERIES ALL IN ONE DESKTOP PC

Hi...Im new to this site and just wanted to ask a question,
I bought a lenovo all in one c series pc..Only a few days ago,
I got it home and booted it up as you do,
Then it went to mircosoft updates and found 45 updates....So it downlosaded them and it went to reboot but all i got was a blank black screen with just the wireless light and the power light on...
Any ideas to what is happening ?....
Im from the UK if that helps
Rob

I have had the exact same problem and it is confirmed it is down to the Intel GMA 3150 update that Windows Update installs for you.
I recommend you print or write the following instructions down before doing them as restarts are required throughout the process.
If the Intel GMA 3150 update has been installed you'll find your computer will go blank once it's loaded into Windows. There is an update available from Lenovo that I'll explain about below, but first you need to uninstall that update that is causing the problem. Press the power button on your Lenovo All-in-One for it to automatically switch off. Then turn your computer on again. AS SOON AS YOU SEE THE LENOVO START UP SCREEN, continue to press the F8 key until you see many options listed on a black background with white text (basically keep pressing the F8 key for 5-10 seconds when you see the Lenovo bootup logo). The reason for this is because the F8 key is registered just after the Lenovo bootup logo. If you don't see anything on your screen within 10 seconds, your display may be turned off even though the power is on - press the button next to the power button on your display to turn it on, and you should see the options I described.
Now use your Arrow Key on your keyboard to select Safe Mode (choose the first option) and it'll eventually boot into Windows. Then go to the Start menu, right-click on Computer and select Properties. Then from the new window that'll appear, select Device Manager from the left hand side. Then in the newer, smaller window, double-click under "Display" and find the Intel Graphics Media Accelerator option - right-click on it and select "Uninstall". Make sure from the next window that pops up you select the checkbox to delete the files relating to the driver. It will probably ask you to restart your computer at this point. Your computer should boot up into Windows as usual but everything will appear bigger than usual.
When you're logged into Windows, go to the Start menu, search for Windows Update and launch the program. From the left of the new window, select "Change settings" and where it says "Important updates" there's a drop down box; choose "Download updates but let me choose whether to install them". This is a temporary measure to ensure the Intel GMA 3150 driver isn't reinstalled until we install the update from Lenovo that fixes this issue.
Now, this blank screen issue has been rectified by Lenovo in the form of a software update that is available from http://consumersupport.lenovo.com. From there enter your serial number (found on the back of your computer) - or alternatively select the option that starts at the top of the list of Lenovo computers - for instance, my All in One is Lenovo C200 so it's listed as "3000 C200". From there, find the BIOS update that can be installed via the operating system which is at the top of the list of the drivers available. Download the .exe file, run the application for it to install itself and then restart your computer once it is installed. Then go back to the downloads page at http://consumersupport.lenovo.com and also download the second file which has a .txt extension (I believe); these are the instructions. Follow the simple instructions. Once you have followed the instructions you'll see it asking you to enter any key to restart. For me it didn't restart the computer so I had to do this manually by pressing the Windows key on the keyboard which opens the Start menu and using the arrow keys to get to the Restart section of the Start menu. Once your computer restarts, go back to Windows Update and change settings back to "Install updates automatically". Now click OK and then back at the left section select "Check for updates". Once it has checked for updates click on the "important updates available" link in the Windows Update window and find the Intel Graphics Media Accelerator option (if you can't find it, from the left select "Optional", it should be in there instead. Whichever one it is in, make sure all updates are DESELECTED in both Important and Optional and then go back to whichever section the Intel Graphics Media Accelerator Update is in, and select that update, then click OK from the bottom right and go ahead and install it. Once it is installed, you'll find your display goes black. Don't worry at this point, this is the update installed. Wait 1 minute and then press the power button for 3 seconds for your computer to turn off (once you press the power button it'll take a few seconds to turn off). Turn on your computer again and you'll find it boots back into Windows fine with that Intel update that previously caused a blank screen at start up. Everything is now done and the Intel update is now installed. The reason it causes a black screen after it is installed I don't know, but after turning off/on again, everything works fine - since the BIOS update has fixed the blank screen at start up problem.
Hope this helps. I know it's in depth, but it shouldn't take too long. I'm a customer and not a staff member at Lenovo, by the way and I did everything I described above when I had the same problem. A Lenovo staff member over the phone did explain about the Intel GMA driver causing problems when I called for an unrelated problem and then it happened to me later on, realising it's the Intel GMA driver that Windows Update installed.
My personal tech blog

HP Deskjet 2540 Series All in One Printer Offline

Ok so I have had this problem for what seems like forever now. This has happened multiple times, and I always have had to use online HP tech support to fix it, but this time I don't seem to have that option. My printer says that the status is offline, and I really need to print something. I have gone through the forums, tries multiple different answers that multiple people say will work, and nothing has worked so far.

HI , Welcome to the HP Support Forums! I understand that you're having issues with your HP Deskjet 2540 Printer going offline. I would like to look into this with you. There are many reasons why this might be happening, is your printer connected wirelessly? Important! Do you turn your printer off between uses? If your printer is connected wirelessly, I recommend you always leave it on so it stays connected to your wireless network. Otherwise, it will lose the wireless network configuration and will need to be setup again and again. To determine which of these documents is suited to the problem, it will depend on whether your wireless light is blinking or is solid. If your wireless light is blinking, then it is no longer on the wireless network. Follow this guide, HP Deskjet 2540 and HP Deskjet Ink Advantage 2540 All-in-One Printer Series - Printer Does Not Maintain Wireless Connection. If the wireless light is solid, than it is still connected the wireless network. Follow this guide, HP Printers - 'Offline' Printer Status Message Displays (Windows 8). What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

New computer with windows 8. hp officejet 5610 all-in-one scanner worked but is now offline.

I have a new dell computer with windows 8. the hp officejet 5610 all-in-one seemed to be fine, and I could scan and print. Now I can no longer scan. charms - settings - change Pc Settings - devices shows HP Office Jet 5600 offline!
There may have been a request to update some software which I may have allowed. Maybe this is my problem? How do I fix this?
thank you
This question was solved.
View Solution.

Hi,
Please download Full Feature Softeware and Drivers from the following link and install on your Dell:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=au&dlc=en&sw_lang=&product=4411...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems with hp1317 all-in-one printer

I have a Mac OS X snow leopard and an HP 1317 all-in-one printer. Although it says that the printer is ready it still remains idle and won't print. I've checked everything I can think of: unplugged the printer for a while and made sure I have clicked on Resume etc. Please could someone help? Thanks. I did have suggestions from someone and this helped for a while but now having problems again.

Thanks for your suggestions. I've now uninstalled and reinstalled the HP software but am still having the message that there are components missing from the software so I still cannot print my documents. I'm totally baffled and feel like slinging the computer through the window!!! If you havae any more ideas please feel free to pass them on to me.

Printing/Scanning Problem with HP All-In-One

As you will see, I am a bit confused as to how my Mac is talking to my HP all in one. I am having printing and scanning problems. When I try to print, nothing happens. I go to print status and the print job is there but the printer is not printing. I try pausing, deleting and trying to print again, hold to no avail. It recognizes the job, it just won't print.
Scanning is similar. Most of the time I end up with an error message "The scan cannot be performed because another program has control of the HP imaging device". It directs me to restart the program, close all programs, re-boot the computer. I have done all of these and no go. In addition, no other programs are running at the time.
As far as my computer recognizing the HP, it does in both wifi and bluetooth. I have made it my default printer.
I have a time capsule as a router and everything is set up properly for it. Four bars are shown indicating it is acting properly. Both it and bluetooth are turned on. The HP status lights are on for both wifi and bluetooth.
I have checked with HP and Apple Support and could not find anything that addresses my issue. Please help!!
Thanks

I had a similar problem awhile back with my HP F2210 all-in-one. I basically re-downloaded all of the software for the printer from HPs site. Before re-installing, I did a safe boot. Then, I reinstalled and restarted and all was well. When software update told me there was a new driver available, I installed it and things still worked. I'm able to print, scan, and all the printer is supposed to do without a hitch.

Printing problem with 5610v all-in-one.

After replaceing a print cartridge the printer started printing with a shadow. That is, the print has a second light image before the main character is printed. I do not know why this is happening and I need to change the charicteristics of the printing back to normal. I have cleaned the new cartridge and I have replaced the cartridge. I have also aligned the cartridge but nothing helps. Suggestions will be greatly appreciated. My all-in-one is a little over two years old and I use Windows Vista Home Premium 64 bits.

Try doing this:
1. Unplug the power cord from the back of the printer and from the wall outlet.
2. Wait for a minute or two.
3. Reconnect power cord directly to the wall outlet.
4. While the printer is still unplug from the back, press and hold the pound (#) and six (6) buttons at the same time.
5. While holding the pound (#) and three (6) buttons, reconnect the power cord to the back of the printer and then release the buttons.
6. Turn on the printer if it won't turn on after some time.
7. Follow the instructions on the LCD.
8. Try doing a copy in black after the reset is successful.
Please keep me posted if it works.
Message Edited by smartfriend on 11-25-2008 06:28 PM
Please click on KUDOS if you find my solution helpful.

Mac OS 10.7 printer problem with 6500 all-in-one wireless

HP 6500 all-in-one wirelss: After configuring (and reconfiguring) the printer and exhausting all the troubleshooting steps suggested by HP, I still have the problem of prints stalling in the queue or, alternately, printing very very slowly. Wireless connectivity is "excellent" according to the Wireless Network Test Report. When printing, printer is found, display says "Connected to Printer" then the barber-pole spins and spins and eventually the word "Idle" appears. Any suggestions on how to get printer to work?

This article should help to maintain wireless connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en#N101
Give the steps outlined a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

An interesting problem for HP All-in-one machines

I posted a problem Sunday about my system freezing during boot. It was suggested that my power supply was probably underpowered. See link below for the thread:
https://forum-en.msi.com/index.php?threadid=43996&sid=
I bought a new 480W power supply (see specs at bottom) to resolve the problem. After installing it, I was surprised to see it freeze at boot-up again. So, this time I unplugged each USB individually. It turns out the device causing the problem was my new HP all-in-one printer/scanner/copier.
I checked HP's site to find out that interestingly enough the computer was trying to boot from the digital camera card slots! Anyway, I downloaded the new firmware for my printer and everything is working great now.
I am glad I replaced my power supply though, now I can overclock without worrying too much. Plus, the PS that came with my case was a piece of junk .

Yep you Must watch those Do It All USB Devices, And you are 100% Correct Getting rid of the PSU that came with your Case, is the BEST Upgrade that you could have made Period!............Sean REILLY875

Align problem on CB745A All- in- one

After replacing the black ink cartridge on my new F4480 all in one printer ,I noticed it print extremely slow and complain about align cartridge every time,i have done alignment several times but the problem persisted can be the problem ?The printer is new could it be a mechanism problem or is it coming from the new cartridge

I'm really not certain on how to fix this but it may be driver installation issue. You said it was a new printer, have you just upgraded from an older printer? I'd attempt to uninstall your older drivers and reinstall the driver for the new printer. This might be the cause of the alignment pop ups but is unlikely to be the cause of slow printing.
Regards,
Although I am an HP Employee I am not expert on all products.
The views I express here are my own and in no way represent the views, opinions or strategies of HP.
I'm just trying to help out if I can.

Windows 8 problems 2575 series all in one

Similar Messages

Maybe you are looking for