Windows 8 Problems in Boot Camp

I have recently installed Windows 8 in Boot Camp with my Mac. I also installed the Boot Camp special hardware.
But recently Windows 8 started to freeze suddenly, make loud beeping nosies which require me to force shut down.
Is this a problem with Windows 8, or is it the Boot Camp software?
I really do want the answer quickly. This is becoming an increasing problem.

I would point out as I did above:
I also installed the Boot Camp special hardware.
you are running Windows.
Boot Camp (Assistant) partitions the drive, and in Lion downloads Windows Support software.
Lion 10.7.4 w/ Boot Camp 4.01 is the better choce.
With Windows you will always be on your own and need to update drivers.
Apple isn't going to until after 8 is either released or is finalized, and maybe only for Mountain Lion (guess based on past)

Similar Messages

Windows XP problem with Boot Camp

I set up my Boot Camp partition to make a 100GB Windows partition for XP. I got a setup disk for Windows XP Home Edition SP2 and when I went into Windows setup, my hard drive was only listed as one partition. I've tried it over and over again, tried making different sized partitions, and it still doesn't work. Can anyone help me?

At some point in the startup, I think you have to hit F4 to bring up a custom install dialogue, or it could be F10, to give you more options.
It happens with some editions of XP and no rhyme or reason anyone has deciphered.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Native resolution problem on Boot Camp running Windows 8.1 on Macbook PRO 15 (2011)

Hello
Couple days ago I purchased a DELL U2414h display, and I came across some problems while trying to use it with Windows 8.1 on Boot Camp.
Everything works like a charm on MAC OS X and I get 1680x1050 resolution on my 2011 15 inch Macbook PRO, and 1920x1080 on the external DELL display.
The problem starts when I run Windows 8.1... I get my native resolution on the Macbook, but the maximum usable resolution on the external display is 1776x1000. There's an option to choose 1920x1080, but when I do that, the screen looks blurry. Is there any way to overcome this problem?
I'm using HDMI Adapter, and I installed all the drivers which were downloaded while installing the Boot Camp
Cheers
Patryk

No I haven't, but could it be the case? The same display with the same adapter works fine while running the MAC OS X.
But yeah, the adapter converts the mini display port to HDMI (as far as I know)
Thanks for the reply

HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

Go into your system preferences and click the startup disk icon then select your Mac HD.

Problems with Windows install and erasing Boot camp partition.

I recently decided I'd try running a copy of XP on my Macbook, the only reason being that the software for my OU work is only available on Windows. I used Boot camp assistant to partition my hard drive which went smoothly. When I tried to install Windows, I get to the Windows install screen, and it says "Press enter to begin installation". Unfortunately, my keyboard doesn't seem to work, so obviously I can't begin the installation. I've tried using my old Apple USD keyboard, but it didn't make any difference. I thought I'd try the whole process from scratch, but found I can't erase the original partition. I've read that you should use Boot camp assistant again, but when I press the continue key, I get the message:
"The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
Does anybody know a way of sorting either of these problems out? Much appreciated.

I've been doing a bit more reading into the problem. I think the keyboard problem's because I'm not using the SP2 version on XP. So hopefully once I get a copy, I should be able to sort it. But I still can't seem to use BCA to erase the partition.

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

Windows Update on Windows 7 (x64) on boot camp fails

Running Windows 7 x64 on Boot Camp and trying to install an "important" update from windows update, but it fails:
Update for Windows 7 for x64-based Systems (KB2506014) - Published: 4/12/2011.
I received error code 80073712 and ran System Update Readiness Tool to no avail. Microsoft recommends repairing Windows from the install disc if using that tool fails, but I'm not willing to go that far just yet.
KB 2506014 title is "Update for the Windows Operating System Loader", so I am wondering if there is something about how Boot Camp is configured that is preventing this from installing.
Has anyone else running Windows 7 x64 on Boot Camp received the same error for this particular update, or been successful in installing it? It is thus far the only windows update that has failed to install for me.

KB 2506014 2011-04-13 (important) http://support.microsoft.com/kb/2506014
Reason description -
http://www.microsoft.com/technet/security/advisory/2506014.mspx
Re-download?
http://www.microsoft.com/downloads/en/details.aspx?FamilyId=348f56f3-eb07-42f4-9 dd2-eadc7251fe34&displaylang=en
Try Search, pasting data from between {} {"windows 7"+KB2506014+fails} into search argument. This shows problems with Norton etc.
You could download "Autoruns" to see drivers etc. that are loaded - good coding 606K - from Sysinternals - Mark Russinovich and Bryce Cogswell. http://technet.microsoft.com/en-us/sysinternals/bb545021
Good for Windows 7, this allows disable of questionable/unwanted drivers
I uninstall bootcamp wireless etc. drivers such as broadcom, bluetooth that I do not use on Mac Pro.
There are some utilities not compatible with Windows 7 which you do not want to use.

Can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work

I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
Macbook pro retina
os x yosemite 10.10.2
Thanks

There are several possibilities.
1. You do not have contiguous free disk space.
2. BCA has failed, or you may have a Fusion drive which is causing problems.
3. You have incorrect permissions on the disk.
4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support?

Windows 8.1 with boot camp on mac mini troubles

After installing a licensed Windows 8.1 with boot camp on my mac mini (2012,i7,4gb ram) my mac os Mavericks have trouble with starting,and i can't run recovery and safe mode.Another problem-i don't have sound in windows,but windows show me no troubles,and red light apear!!!Please help!

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 7 64 Bit Boot Camp install on iMac 27" (2010) without int. DVD drive

I have a current 27" iMac (bought last year) and the internal DVD drive doesn't work. It's new, has NEVER been used. I guess it's dust inside, but cleaning CDs didn't help. I don't want to bring or send my iMac to the Apple repair service because normally I don't need this internal DVD drive.
Hence I'm looking for alternative ways to install Windows 7/64 via Boot Camp. I have rEFIt-0.14 installed, an Original Windows 7 Retail-DVD (and a ISO image of it), an external USB DVD drive (Samsung), an external USB hard drive 160GB (LaCie), some USB flash drives (Kingston, 4GB) and a Windows PC.
I've read many threads about this problem, for example this:
https://discussions.apple.com/message/15002932 resp.
https://discussions.apple.com/message/15016734 (saying it SHOULD work!)
Hmmm... Some people succeeded in installling - other didn't. I've also read about that "Parallels way" - but I would prefer not to use Parallels.
Is any information missing...? What would you recommend? Thanks a lot!

It doesn't work! But others reported that it should!
I've tried it using the Original Windows 7 DVD and also
a bootable 4GB Kingston USB flash drive made
under Windows 7 as follows:
The rEFIt-0.14 boot menu lists the following options...
* Boot Mac OS from Macintosh HD
* Boot EFI\BOOTX64.EFI from EFISECTOR
* Boot Windows from CD
* Boot Legacy OS from EFISECTOR
... but nothing helps - I always get the message
"No bootable device -- insert boot disc and press any key"
and can only switch off my Mac.
What am I doing wrong?
Or will only that Parallels option work? (Last year when
I tried Parallels for the first time, the uninstall function
didn't work comprehensively and I had trouble removing
the Parallels installation completely from my system.)
Thanks for any help!!

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

I can not install Windows 7 By applying Boot Camp

Hi
I have a problem
I can not install Windows 7
By applying Boot Camp
I have a message appear
Boot Camp does not support installing Windows on this Mac.
Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
Hardware
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4x8GB
3TB Fusion Drive
NVIDIA GeForce GTX 675MX 1GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide
Accessory Kit
Software
iLife '11
OS X Mountain Lion
Apple did not you tell me about this problem at the time of purchase
Is there a solution to the problem ?

Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
http://im32.gulfup.com/mGuB1.jpg
http://im36.gulfup.com/hLrW1.png
http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
Is there another application that divide Alhardsk ?

I can't start windows 7 normally from Boot Camp

I can't start windows 7 normally from Boot Camp.
It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
Please advice if anything I should do before cleaning up my partition and reinstall Windows.

I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
Restore check points
Uninstall last update or driver
Clean the system of debris temp files, caches, registry errors, fonts and left overs
make sure you have 20% and 12GB free space or more
A hard shutdown can create more problems.

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Windows 8 Problems in Boot Camp

Similar Messages

Maybe you are looking for