Windows 8 saying printer error, but still printing
Okay so I just got a new labtop (hp) with windows 8 and the hp envy 4500 printer, everytime I print out something (via wireless connection) on the labtop in the right top corner, a popup will say error printing ( can't remember exactly what it says) but eitherway, it's saying that but the printer DOES print. Why does it keep popping up saying error or whichever but there is nothing wrong and it is printing. Not a huge issue but kind of annoying, thanks, Sarah
This question was solved.
View Solution.
Hi TonyKnVA
I understand the printer won't print multiple pages.
Here is a url to temporarily disable all the start up programs to see if one of them is causing any issues.
Click Here.
Turn off any Antivirus software.
Try and print a multiple page document from a couple different applications.
You will have to follow the same steps to enable all again.
Let me know if that makes a difference.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
Hi,
I am trying to install 'Playonmac' so I can install Meta Trader 4 - however each time I reach the next button in order to install XQuartz it hits a dead end
- the 'Installing Quartz' window is saying installing Quartz, but all it does from there is the clock the spins around, just keeps spinning and nothing happens - I have waited and waited for it, but it just kind of freezes there. I have reloaded the software over and over, and even switched off the firewall in case it was blocking Playonmac. It is really important I load Meta Trader 4 on my Mac.
Help will be much appreciated - Has anyone had this sort of problem? Does anyone know how to resolve it?
Regards
JoeAccording to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers. -
After moving all photographs from my first catalogue, which was a mess, to a new catalogue, it all worked fine. Until that is I tried to open the new catalogue, which had worked OK all day. I now get a window that says "Unexpected error, select another catalogue."
OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount..... -
I have logged in to iMessage using my id, received the email saying i logged, but still can't use it
I have logged in to iMessage using my id, received the email saying i logged, but still can't use it. have I done the rgistration process correctly?
Make sure the pdf has the '.pdf' extension on the file name. I've seen this a few times and adding the extension usually solves the problem.
-
Macbook pro says not charging but still the battery is charging
macbook pro says not charging but still the battery is charging
This isn't reference in any of the online support material that I've seen. Do you have a link to support this? Just curious is all.
I had a similar issue on my wife's '09 MBP. Initially I thought it was the battery seeing as it's an older machine, but we tried resetting the SMC (after a bunch of other suggestions) and that seems to have done the trick. -
Having problems downloading iTunes. After an update notice, I was unable to open iTunes. I de-installed and attempted to reinstall it and it still won't open.
The first error duirn the update was a dll file missing, then a Windows error 7. The screen on the Apple site say Thank you for downloading, but still not there.A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
I have a "windows can't find"issue,but still lets me see the page,how can i correct this?
i go into anything handled thru my yahoo messenger,i get a "windows can't find" but still let's me in to that site,how can i get rid of the "windows can't find" error thing?
Try:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox -
Director wont run once installed. Error window appears saying "unexpected error"
I installed the trial version of director to test the software out on my mac, which is running the latest version of mountain lion but i recieve a pop up window stating a unexpected error has occured when trying to run the program.
I have uninstalled the software many times and reinstalled it to try fix the issue but this has not worked. I have tried many ways of unistalling, the first being the offical way adobe says which is by using the uninstalling program. secondly i tried dragging the application to the trash bin. lastly i downloaded app cleaner to get rid of it and then reinstall but none of the methods have work.
please could somebody help me
RyanHI
Thank you for your reply the following is error detail:
Exception Details.
oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:612)
etc.......
I checked metalink but nothing changed .
your advice please
best regards -
Cash Management - AutoRecon without errors, but still unreconciled?
Hi guys,
Pretty interesting question:
I have multy period's bank file (transactions for 3 accounting periods), all settings are according the manual on AP and CM sides done.
Statement's Import finished without errors, AutoReconciliation finished without errors, but Statement still have status UNRECONCILED and on AP side transactionsin ap_checks_all table still have STATUS_LOOKUP_CODE as NEGOTIABLE, and CLEARED_AMOUNT, CLEARED_DATE, REQUEST_ID, CLEARED_ERROR_AMOUNT and ACTUAL_VALUE_DATE fields are still empty.
The periods were OPEN at the time of a run.
Only when I go to the Statement in CM and open the lines and reconcile them one by one it works.
Please advise, any help will be appreciated!
BokHi,
Step: 1
Check the System parameters Auto Reconciliation Setups
Step: 2
Check the Bank Statment line has Bank Transaction Code attached
Step: 3
Check the Document number given in Bank Statement line is matching exactly with the Payment/Receipt
Step: 4
Check the Bank Code attached to line is same as the available line you are trying to match i.e. RCT to Receipt, PMT to Payment etc
Step: 5
Assign MO: Security Profile Option to your user id
Run Autoreconciliation Program now. The issue should be resolved.
Regards,
Sridhar -
My iPhone was at 63% then suddenly died, it say its charging but still not turn on, what do I do??
I have tried everything and cannot get it to turn on, it comes up with the red battery icon saying its charging. But still nothing! Help!!
Do not attempt to force it to start after it has shutdown due to low charge. Fully charge before using it again. If it will not charge, try a different outlet, a different charger and cable, and if it still does not charge, take it to an Apple store genius bar for testing by the technicians.
-
Recovery mode says all ok but still stuck
But still cannot get past grey start up screen with spinning wheel after software update
Do the Step #4
Step by Step to fix your Mac
If that doesn't work and you don't have a backup of your data off the machine:
Create a data recovery, undelete boot drive
If you do have a recent copy of your files off the machine then try a #18, but your likely going to have to do #20
If you do make the data recovery drive, make sure you setup with the same named user, programs and everything, grab your files off the internal drive.
Then you can Disk Utility > zero erase...
(why here:) Reducing bad sectors effect on hard drives
...the internal OS X Lion partition and use Carbon Copy Cloner to clone the external onto the internal OS X paritition. Cloning is the easy part, the software does everything. -
Network diagnostic says connection sucessful but still get error message
The error that comes up when I try to connect to iTunes is, "Make sure your network connection is active and try again. " I've checked network diagnostics and it tells me that the connection attempt and secure connection attempt to iTunes store were successful. My connection to internet works right now, but internet explorer is not working. When I try to open apple support webpage with explorer, it tells me I don't have permission to access it on this server. I'm using the iTunes 7.0 and have recently re-installed it.
Can anyone please help?I have the same problem too, suddenly my apple id has been disable & i couldn't download or update any thing!!
As a solution i reset the password, sign out of my account on my iphone and sign in easily but it didn't solve any thing
Plz help me .. What can i do?!! -
I haven't been able to connect to itunes for 3 days. It says theres a connection error, yet I am connected to the internet. I have redownloaded itunes and still get this message.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
No error but still nothing is enter into my Excel file
this is my connection class and i enter paramters into the logPayment method ...... Im getting NO ERRO message by still no data is entered into my excel worksheet ..... and my parameters all have values in them ..... none are empty
Can anyone help me please
here is my code
import java.io.*;
import java.sql.*;
import java.util.*;
import javax.swing.*;
import java.awt.*;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.util.GregorianCalendar;
import java.util.Date;
import java.util.Date.*;
import java.util.Calendar;
* The class which provides the link between the user interface and the spreadsheet.
* @author John (Sean) Gleeson #100437719.
class JDBCConnExcel
* Creates the class, i.e initalises the mysql driver,
* and sets up the connection to the database.
public JDBCConnExcel()
try
// Initialise drivers
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(Exception e)
System.out.println("Failed to load JDBC/Excel driver.");
//Setup connection to database
try
//Make connection to database
connectionObject = DriverManager.getConnection (ODBC, username, password);
// Setup statement stream
statementObject= connectionObject.createStatement();
catch(SQLException sqle)
String msg = getClass().getName() + ".method() : An exception of type " + sqle.getClass().getName() + " was thrown with the following message [" + sqle.getMessage() + "]" ;
System.out.println(msg) ;
***************************getters***********************************
public void logPayment(String mastID, String name, String address,
String town, String county, double amount)
PreparedStatement aPreparedStatement = null;
File inputFile = null;
Connection con = null;
DatabaseMetaData dmd = null;
try
inputFile = new File("payment.xls");
System.out.println("AutoCommit:"+connectionObject.getAutoCommit());
dmd = connectionObject.getMetaData();
System.out.println("MaxConnections:"+dmd.getMaxConnections());
System.out.println("PositionedUpdate:"+dmd.supportsPositionedUpdate());
System.out.println("SelectForUpdate:"+dmd.supportsSelectForUpdate());
System.out.println("StoredProcedures:"+dmd.supportsStoredProcedures());
System.out.println("Transactions:"+dmd.supportsTransactions());
dmd = null;
System.err.println("Readonly = " + connectionObject.isReadOnly());
aPreparedStatement = connectionObject.prepareStatement ( "INSERT INTO [Receipt$] ([MastInterferenceID], [Name], [Address], [Town], [County], [AmountPaid]) VALUES ('"+mastID+"','"+name+"','"+address+"','"+town+"','"+county+"','"+amount+"');") ;
System.err.println(aPreparedStatement.executeUpdate());
connectionObject.commit();
System.err.println("Committed?");
catch (Exception e)
e.printStackTrace();
finally
try { aPreparedStatement.close();
if(dmd!=null)
dmd = null;
if(con!=null)
con.close();
catch (Exception e) {}
/ //==============instance variables=================================================//
private Connection connectionObject;
private Statement statementObject;
* odbc name.
private String ODBC = "jdbc:odbc:pl";
//jdbc:odbc:Driver={Microsoft Excel Driver (*.xls)};DBQ=pathName;DriverID=22;READONLY=false","","");
//Above used to write any xls file
private String username = "";
private String password = "";
}try { aPreparedStatement.close();
if(dmd!=null)
dmd = null;
if(con!=null)
con.close();
catch (Exception e)
e.printStackTrace();
}instead of catching the last error i printed it and it came up with an error of nullPointerException
for the line of code
try { aPreparedStatement.close();how can i fix this error please
and thank you -
GETTING NO ERROR BUT STILL NOT GETTING THE DESIRED OUTPUT!!!!!!!!
HIII ,
AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
THE CODE FOR THE "ADD" BUTTON IS :
wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
THE CODE FOR ADD function IN COMMANDBEAN IS
public void add(String empno,String empname){
try {
local.createdata(empno,empname);
} catch (Exception e) {
e.printStackTrace();}
PLZZ DO HELP OUT!!!try { aPreparedStatement.close();
if(dmd!=null)
dmd = null;
if(con!=null)
con.close();
catch (Exception e)
e.printStackTrace();
}instead of catching the last error i printed it and it came up with an error of nullPointerException
for the line of code
try { aPreparedStatement.close();how can i fix this error please
and thank you
Maybe you are looking for
-
Web Page composer : new layout does not display Page Header Links Manager
Hello, I am currently working with Web Page Composer, and this is my issue : when using original layout, the header are displayed with "Add to favorites", "Print", "E-mail" etc... and all chosen links via the "Select Page links" link. But whith my cu
-
Hi I desparately need help to get past my PDF system to print items that have been sent to me as a PDF item - even papers that aren't PDF originated are being transferred to PDF. Anyone who can help. Cheers = hallsheadWA
-
Administrator user getting re-synchronized
Hi Folks, Using Project On-Line, one of our users was getting removed from the Administrator security group where we had assigned him. Note the Queue Job Type = "Synchronize Project Web App Permissions to Project Web App" happens every day at a litt
-
Hiding button in notification Page.
Hi All, I have to hide the 'Approve' button from Notification Page. Is it possible to do it? Pl. help. Thanks in Advance. Regards Mano
-
I've stoped and restarted the AMDS but no change (this worked when I had the same problem with the iOS 5.0 upgrade), what should I do next?