Windows 8 to windows 8.1 restart problem

Installes windows 8.1 and pc keeps restarting
Hi i have HaP G62-80SV and update from windows 8 to windows 8.1. The pc opens and after a few minutes restarts and this happens again and again.. This happens because display adapters dont have the proper drivers (amd mobility radeon hd 5000 series and intel hd graphics) where i can find proper drivers? i tried amds drivers and instalation failed. Any help please??

Hi @BillyDim ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62-a80SV Notebook PC and issues with the Graphics. I would uninstall both graphic drivers that you see listed in the device manager and restart the Notebook.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Hope this helps
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Windows 7 Pro will not restart if printer on.

    Hello,
    When clicking restart, Windows 7 Pro will not restart with either hp printer (L7680 or C309a) powered on.  The screen just stays on 'Starting Windows'.  Windows will continue to load after powering down which ever printer is powered on.
    This problem just started.  Never happened before.  I could always click restart with no problem before.
    Any help?
    This question was solved.
    View Solution.

    Hey joe_do,
    I see you are having an issue with the boot sequence of your Windows 7 Pro computer when either of your 2 HP printers are powered on.  How are these 2 printers connected with this PC?
    It sounds like the devices may be connected USB and somehow the boot sequence for the computer has set priority for USB over the internal HDD.
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Windows Media Player keeping Automatic Maintenance window/Windows Updates from doing auto-restart

    I have a system that is connected to a domain, and it runs a video playlist in Windows Media Player for digital signage upon bootup (and auto-login).  WMP is set to loop the videos over and over again, but it also is preventing automatic updates from
    installing and/or auto-restarting at 3:00AM in the morning (and yes, the system power management is set to keep the computer on all the time).
    How can I fix this?
    I have a GPO set up to install updates and restart automatically (option 4).  I tried the GPO option to use the Windows 8 maintenance window to install updates, and also tried turning that option off and just using a 3:00AM restart period.  Neither
    option seems to work, so it looks like Windows Media Player is preventing an auto-restart to finish the update installation.  Is there any way around this, so that Windows Media Player doesn't stop Windows Updates from doing its job?  I don't care
    if that means the video stops playing because it just starts up again on the next bootup.
    I looked at the WMP GPO's and the only option that sounds like it's related is the option to turn on or off the auto-updating of media info for WMP, but it has nothing to do with what I'm trying to accomplish.  If I missed something, let me know. 
    If there is some other way to accomplish this, such as associating and launching the playlist file with the Xbox Videos app, I would be fine with that, but I need it to loop the playlist continually (I also use the Shuffle option
    in WMP - ***see note below for another question).  I still want the system to automatically install updates and reboot on a regular schedule despite the video playing in the foreground.
    ***Side question: is there any way to turn Repeat and Shuffle options on in WMP without having to load the GUI (for scripting a playlist)?
    Just FYI: this system is actually using Windows Embedded 8.1 Industry Enterprise (from a MAPS account), but it isn't customized aside from not having the standard WinRT apps from a stock Win 8.1 install loaded - it is a stock install from the ISO. 
    From what I understand, it is the same as Windows 8.1 Enterprise, except that it is only licensed to be used as an "appliance" machine for a single role - which it is.  So I'm assuming that there are no actual differences from a "regular"
    Windows 8.1 SKU that would cause this issue.  If I am completely mistaken about this, please notify me on it.  The reason I'm making this statement is in case there are any differences in Embedded 8.1 Industry Enterprise that I am not aware of. 
    Otherwise, I welcome any assistance that would target a "regular" version of 8.1 Enterprise.  NOTE:  Someone said to post this into the Windows Embedded forum, but the only one that exists is the one for POSready - and this is HARDLY the
    POSready version of Windows Embedded that I'm using.

    Hi,
    Did you use the policy Local Computer Policy\Administrative Templates\Windows Components\Windows Update\Always automatically restart at the scheduled time?
    I noticed an description "restart with logged on users for scheduled automatic updates installations" policy is enabled, then this policy has no effect." it means if system installed some updates which unneeds restart computer, this policy would has no effect.
    In my opinion, your problem should not caused by WMP setting. please check your installed updates whether they need restart computer.
    In addition, Power Managment in Control Panel also can prevent the schedule task running.
    Control Panel\System and Security\Power Options\Edit Plan Settings\Change advanced power settings\Sleep\Allow wake timers
    Please make sure this option is enable.
    Roger Lu
    TechNet Community Support

  • MacBook Pro Boot Camp Windows XP-SP3 Win only restarts boot to black screen

    i have a new install of 10.6.1 w/boot camp running an sp3 updated xp version. I have completed the same install on a more new MacBook Pro 15" with no issue, however my mbp 2.33Ghz aluminium has restart problems but ONLY when doing a "restart" from the running xp os. again only when i am running from xp alone, and only when doing a restart (which is all the **** time for xp) does my mbp 1st do a normal apple chime and then hang to a black screen.
    once i power down, hit the power button and restart, do i get a normal blue/grey screen, apple chime and the option to boot to macos or my windows partition. the same restart when running macos brings the grey/blue screen up right away.
    seems to me there must be something off about doing a restart from windows.
    has anyone seen this? any recommendations for diagnostics or a solution would be most appreciated!

    never mind, i blitzed the xp drive and reinstalled. 3rd times a charm

  • Windows 10 preview build 10049 BIG PROBLEM

    hello,
    i got a very big problem after updating to build 10049. after the installation was complete my laptop restarted and i got a black screen with in the botom right corner the build number 10049. after a couple of hours the laptop restarts itself but it keeps
    getting on this black screen.
    i tried a iso of windows 10 preview latest iso build on a usb stick but with every solution i try: format, repair it keeps getting the same error that there is a problem with unmountable bootdevice.
    even using my official windows 8 dvd gets the same problem
    i'm lost. i dont know how to solve this problem.
    can someone please help me with this?

    This is not a one off, it is repeatable on brand new disks.
    I previously had the original win10 preview build installed on this hard drive = no problems.
    I then did a fresh install of build 9879 from CD. Install completed untill it got to the reboot phase = it would not reboot - the hard drive was not recognized in the bios anymore.
    tested broken hard drive in another computer = works
    tested broken hard drive in 2nd connector on my laptop = fail (still not seen by bios).
    tested a few other sata disks I have laying around on both connectors of my laptop = pass.
    upgrade my bios as there is one version higher than I had. = fail (still not seen by bios).
    boot from broken hard drive on another computer and finish the OOB portion of the win 10 preview install = pass
    So it seems clear that the hard drive is still working, but just not recognized on the original computer. It is only 2 months old so I get it replaced under warranty. Replacement disk is recognized by bios, yeah! I then restore image of broken hard drive
    to this replacement. Disk is still recognized by bios. I boot up from this disk on my laptop. It works OK until first reboot, then is not recognized by bios anymore.
    Computer = Toshiba Satelite P305 PSPC8U-01400Q
    Hard disk = WD blue 1TB  model: WD10JPVX-22JC3T0
    Note: also with windows 8 running on this computer and the broken hard drive installed in second connector, windows also does not see it, neither through disk manager nor through diskpart command line. But if I boot up in Linux from a bootable USB flash
    drive, then I can see the (broken disk) on this same computer. Yes I can see it and I can read and write to the filesystem, even though it is still not seen by the bios. 
    HI
    Disable PUIS (Power-Up In Standby) with HDAT2.EXE  With PenDrive BOOT MS-DOS

  • Don't know the name of it but a toolbar at the top of the window has disappeared after I restarted Firefox. It contained add-ons such as Download Helper and I don't know how to get it back. Please help. Thanks!

    I don't know the name of it but a toolbar at the top of the window has disappeared after I restarted Firefox. It contained add-ons such as Download Helper and I don't know how to get it back. Please help. Thanks!
    EDIT: Sorry I meant the "Save Complete" add-on, not Download Helper.

    Be sure "Add-on Bar" is checked (click on "Add-on Bar" to check or un-check)
    *See --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

    hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
    thanks for any reply.
    Rosone

    It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
    Check this in a different browser or access site in a differ OS.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

    Hi there,
    I'd like to ask you something:
    I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
    Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
    I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
    What is this access authorization, why was something like that invented and what can I do to get it?
    How do I have to proceed in detail?
    What would it cost?
    I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
    Anyways - can you help me please?
    If you can't help me, who can do so?
    It would be nice if you could answer me as soon as possible!
    Thank you guys
    Prying Pedro

    Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
    Termporarily disable any security software on the computer.

  • Windows 8/8.1: Printer Offline Problems

    Windows 8/8.1: Printer Offline Problems
    Are you getting an error that your network or wireless printer is offline when you try to print?
    When you print to your network printer, does it fail, and when you check the printer status it says Offline?
    Do you have problems printing to your wireless printer after your PC has been asleep?
    If you answered YES to any of the above questions, then you have a problem with your network printer being offline.  After some investigation into this problem, we recommend updating windows.  Run Windows update to check that your version of Windows 8 is up to date.
    There are a few windows updates that may help with this problem
    1)    Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
    2)      Install this Microsoft patch for the WSD service.  http://support.microsoft.com/kb/3000461
    If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
    Assign the printer a static IP address
    An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
    Get the printer IP address.
    Press the Wireless button on the printer control panel to view the network settings.
    Access the Network menu on the printer control panel.
    Print a Network Configuration Page or Wireless Test Report page.
    Once you have the printer's IP address, open a new web browser window or tab.
    Type the IP address in your web browser's address bar, and then press Enter.
    Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
    If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
     note:
    Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
    If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
    The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
    In the EWS, click the Network tab.
    In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
    Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
    After the manual IP address populates, click Manual DNS Server.
     note:
    Keep a record of the manual IP address for reference.
    On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
    If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
    Method one: Use publicly available DNS server addresses
    Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
    After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
    Method two: Get the network DNS information via your computer
    Select your operating system, and then use the following directions to obtain the DNS server addresses.
    Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
    When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
    Scroll to and locate the DNS Server addresses.
    In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
    Print a test page to make sure that the printer's IP address is the same as you assigned.
    Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
    Adding a Wireless Network Printer using Control Panel
    Go to Control Panel and choose Devices and Printers
    Click on Add Printer
    The PC will search the local network and display the network printers.
    Choose the printer and select Next
    The system will then try and auto select a compatible driver
    Select the current driver and Click Next
    The system will then ask for a name for the printer. The user can change the name and then click Next
    The User can then choose to share the printer
    The user can select to make this new printer the default and then click Finish.
    The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
    To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
    Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
    Choose the Advanced Tab
    Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
    Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
    The user should try this configuration and see if they still experience problems.
    Please Note:
    DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
    JonW
    I work for HP

    I have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
    Your solution does not help me because I have tried to install Win8.1 and it failed.
    I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
    Is there another solution? 
    Or is there a way I can save the print queue?
    Mike

  • After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

    After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • IPod model A1059, freezes, unresponsive to all click wheel entries.  Reset does not work.  Does not show up in ITunes or on windows explorer.  What is the problem and how do I fix it?

    IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work.  Does not show up in ITunes or in Windows Explorer.  What is the problem and is there a fix?

    If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
    B-rock

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.

    can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.  How can i fix this?  need very detailed step by step instructions on how to fix. thx

    Check out this discussion link:
    https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15

  • My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

    I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

    Did you tried uninstalling and then installing it again?
    Ankush

  • HT1657 Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window.  Anyone else have this problem?

    Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window.  Anyone else have this problem?

    This doesn't seem right.
    I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
    My wife started watching the movie the next night and got about half way through.
    The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
    But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
    Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
    So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
    Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832&#12398832

  • I have placed a check mark in the Block Pop-Up Windows box and when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?

    I have placed a check mark in the Block Pop-Up Windows box but when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?
    == This happened ==
    Every time Firefox opened

    See this:
    http://kb.mozillazine.org/Popups_not_blocked#Other_software_disables_the_popup_blocker

Maybe you are looking for