Windows 8 to windows 8.1 update failure
hello everybody.
I updated my laptop, hp envy ts touchsmart sleekbook 4-1202ea, from windows 8 to windows 8.1. It is giving boot configuration data is missing some information with error code 0xc0000034.
Whenever I power on my laptop it shows me the blue screen of death with that error. i am not able to go to bios setup, boot device select and system recovery. by pressing relevent function keys, the blue screen again appears, i am only able to go to system information and system diagnosis by F1 and F2.
Please help...
Thanks
This question was solved.
View Solution.
Thanks a lot for your replies. Actually i bought my laptop recently so didn't made any recovery set. so is it possible to use recovery set of another laptop having windows 8 ??
Similar Messages
-
Windows 8.1 Update Failure : We couldn't complete the updates, Undoing changes
Yesterday I built my first computer and I installed Windows 8.1 on it, everything was running perfectly fine until today. This morning I had an update notification and I installed it, about half way through the update an error occurred and it said it couldn't
complete the update and it was undoing the changes. I left it on that screen for about an hour and nothing happened. I tried finding what the update was, so I went to recently installed updates, and there was about 40 of them from just today. Whenever I tried
to uninstall any of the updates, it said error, preventing me from deleting any of the updates. I was wondering if anyone could help me try to uninstall/re-install this update.Hi Kmanxx,
The update failure might be caused by a variety of reasons such as connection issues, incomplete Components and firewall. For troubleshooting, specific error code of the failure update will be helpful.
You also could find installation failure events and error code in log files, such as WindowsUpdate.log (C:\Windows\ WindowsUpdate.log) and CBS.log(C:\windows\logs\cbs\cbs.log). Here you first want to search for “error” in your logs. This will search for
Error entries. Focus on the day the installation attempt occurred. Refer to your time line of update log, find what error happened. Of course you could post your log content and we’d like to give it a look.
How to collect the specific error code of failure update:
We can do this by viewing your update history.
1. Swipe in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), and tap or click Settings.
2. Tap or click Change PC settings, and then Update and recovery.
3. Tap or click View your update history.
View failed update error code.
For your reference:
Unable to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2(also applies to Windows8.1):
http://support.microsoft.com/kb/2509997/en-us
If all updates fail to install on a particular client or if for example you cannot install a Service Pack:
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Fix Windows corruption errors by using the DISM or System Update Readiness tool:
https://support.microsoft.com/kb/947821?wa=wsignin1.0
Regards -
Windows update failures over the past several months
I'm having the same issues regarding windows update failures as many documented in this forum. I have run the repairs recommended, drive scans, etc. with no success. I'm at the point that I think that it would be better to cut off the update notice. I have
zipped up the files recommended and posted them on my skydrive site. That location is https://onedrive.live.com/?cid=C1221863E15FBC11&id=C1221863E15FBC11%211274.
Please help. Joe Collins
at the point that I think that it would be better to cut off the update notice.
You may be right. Try eliminating WU from a symptom description. E.g. pick one of the updates which is available as a download and try installing it that way. Just use WU as a guide for what you should download and install manually.
I imagine that if that works eventually WU will repair itself and realize that it doesn't need to do anything else for you.
A search to support the idea of manual download and install acting as a workaround for this symptom:
http://www.microsoft.com/en-us/search/results.aspx?q=0x800f0922%20CBS%20download
<quote>
Well, when I try to download Office 2013 updates, about 15 of them, they installed fine.
</quote>
Also
http://social.technet.microsoft.com/Forums/windows/en-US/7060c961-3b7c-42ba-ad84-008c357478d8/installation-failure-windows-failed-to-install-the-following-update-with-error-0x800f0922?forum=w8itprogeneral
(Microsoft search for
[HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Another suggestion which could be implied by your diagnostics would be to uninstall your Norton package (and any of the other interferers which are mentioned that would be suspect). Norton is notorious for interference with updating and is also known
to interfere even when it is supposedly disabled and is also known interfere even when it has supposedly been uninstalled, so who knows what the cause of the problem is, corruption or blocking, you could at least change your POQexec.log by taking such
manual action.
BTW what have you done exactly about trying to repair WU? You could save yourself a lot of manual effort if you could get it working properly.
Otherwise, on the manual update tack I would try doing first the ones which arrive in pieces. Search WindowsUpdate.log for Downloading for clues that way.
Good luck
Robert Aldwinckle -
Help! I updated iTunes on my windows 7 laptop and I updated my iOS on my iphone4 and I used a USB to plug it into my computer but it doesn't have the "iPhone"" icon appear in the corner of the screen. Can anybody please help me fix this so that I can sync my music to my iPhone. I would really appreciate it! Please and thank you!!!
Device not detected in iTunes for Windows: support.apple.com/kb/ts1538
-
IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?
Hello ibebry
Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file.
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G. -
iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.
Hi calltimecasting,
Welcome to the Apple Support Communities! If your iPhone is not recognized by iTunes on Windows 8, I suggest the steps in the following article to get this resolved.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
I hope this helps,
-Joe -
iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??
Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?
uninstall pse 10 (properly using the adobe uninstaller).
clean - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then try reinstalling using the adobe installation file(s).
if you see an activation count error while trying to reinstall contact adobe support, https://helpx.adobe.com/contact.html
and ask for an activation count reset. -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
why can't i update itunes on windows xp? It says update server could not be contacted but internet is working fine. I'm trying to go from itunes 10 to itunes version 11
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
See Here > http://support.apple.com/kb/TS3125
From Here > http://www.apple.com/support/itunes/troubleshooting/ -
FORGOT TO MAKE WINDOWS 8 RECOVERY DISKS AND UPDATED TO 8.1, FACING PROBLEMS NOW
I brought hp pavilion g6 2301 ax laptop in august last year. i bought it online. and i wasen't prompted to make any recovery disks.(later when i talked to hp executive he told me that the os warrenty is upto only 90 days)
i updated to windows 8.1 and i am having overheating and fan issues.. fan is making so noise and pc is over heated.
i was told to roll back to windows 8, and as i updated to 8.1 hp' executives are telling that i cant roll it back to windows 8.
they are telling me to purchace a new copy of windows 8.
i cant afford that now as i am under 3 years of hp warrenty.
please help me.
Spoiler (Highlight to read)Shubham_ringne,
I just tried a Windows "REFRESH" on my HP 13 Split x2 that came with Window 8 and was upgraded to 8.1 . After clicking REFRESH, Windows stated "Window 8.1 would have to be reinstalled after the Refresh". Additionally, Windows advised that some software, apps, and drivers would need to be reinstalled after the refresh. The Windows "REFRESH" returned the computer to Windows 8. Please see Refresh Your PC to Resolve Problems (Windows 8) to start the "REFRESH" process.
The HP Recovery partition should not have changed and should contain the original Windows 8 factory image. Once you have refreshed your computer and it is back to Windows 8, you be able to follow the instructions in Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 8) to create you Windows 8 HP Recovery Media.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I bought a iPhone 6 16 GB i OS 8.1.2 last week. A software upgrade to i OS 8.1.3 was downloaded to my phone automatically. I taped install now and the phone went to a window verifying update. Then after the verifying window another window came up and said a error has occurred and can not install. Has anyone else had this happen? If so how do I install upgrade? Or should I not install?
Also check to see that the auto-pushed update has been deleted from the device after this botched update. If the iOS update hasn't been installed due to an error, the update file could be sitting on the device using up storage space and possibly causing other issues.
Check if it's on the device under: Settings/Usage. then under STORAGE, tap Manage Storage. A list will populate with your installed apps. The iOS update will be in this list if it's still on the device but hasn't completed installing. If you find the iOS update app in this list, tap on it, then tap on the Delete App button.
Afterwards, try the iTunes update method which is easier to install since it does not require any free device space to complete. -
Error 80072f8f after installing Windows 8.1 / 2012 R2 "Update"
I just want to share my experience with the new Update.
We are using a WSUS (on Windows Server 2012) with a Wildcard certificate from Geotrust for some time now.
I manually installed the new "Windows 8.1 Update 1" on a Windows 8.1 and a Windows Server 2012 R2 System, both joined in the Domain and were able to update with the WSUS.
Right after the update both systems keeps failing to communicate with the WSUS with error 80072f8f.
After changing the ssl certificate on the WSUS Server to a internal PKI certificate the Systems could talk again with the wsus Server.
So keep in mind when you upgrade to check if the system still works with your wsus server.I am also getting the same issue where the 80072f8f error occurs when attempting to scan for updates.
The client machines are Windows Server 2012 R2 (with Update 1 installed) and the WSUS server is also running Windows Server 2012 R2 Update 1.
You answers are not remotely helpful in this instance.
The OP has mentioned several times he is using a Windows Server 2012 WSUS box. Therefore the article you reference has no validity for this issue.
TLS 1.2 is enabled by default on 2012 so the linked article and advice unfortunately does not fix the issue.
Has anyone else had the 80072f8f error when using a Windows Server 2012 R2 WSUS box?
We see errors in the CAPI2 log for Verify Revocation Information
and Vertify Chain Policy. Althougjh browsing to our WSUS server in IE shows the correct validated certificate.
Any help would be appreciated.
Kind Regards
James Tighe
MCTS: Windows Server 2008 Active Directory, Configuring MCTS: Windows 7, Configuring -
I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as of this posting). Any suggestions on getting around this? Thank you.
Also, when I put it through the Windows diagnostic, it lists an "incompatible program" WHILE my iPod is plugged in.
-
Running Windows 7 on a Mac: updates and security
I will be purchasing a new MacBook Pro soon and will need to run Windows in order to access some corporate applications and to use Internet Explorer (for Microsoft's Share Point application, Live Meeting, etc.) for my work - fairly limited Windows applications. I have been reading some comparisons of Fusion vs. Parallels and superficially understand the difference between the virtual machine approach and Boot Camp. If I want to enjoy the benefits of doing most of my personal computing on a Mac, it only makes sense for me to have Windows running as an OSX application rather than have to restart to get to Windows via Boot Camp. If I'm going to do the latter, I might as well buy a Windows PC, at least for work.
Despite searching around on the web and talking to various Apple folks on the phone and in stores, I have not been able to find clear answers about 2 issues that seem crucial in running Windows via Parallels or Fusion: (1) how does one install Windows updates, which seem to come out every few days, some of which are major fixes; and (2) what are the security concerns in running Windows as an OSX application - are there any? If there are security issues in running WIndows via Fusion or Parallels, what are the best ways to protect oneself?
A related set of questions is: (3) is it sensible to install Windows in a Boot Camp partition as well as to install it via Fusion or Parallels, or does it work to just install via the virtual machine method, at least for my purposes? If I were to install Windows both ways, would I run into licensing issues with Microsoft, where it might look to them like I was installing Windows on more than one machine? And, if I were to install Windows natively via Boot Camp, what are the best options for security?
Thank you anyone out there who can provide answers or point me to answers.1. Run Windows Update like you would on any other PC.
2. Windows is Windows no matter how it's installed so it's susceptable to the same viruses you could get by running it on any other PC.
3. Both Parallels and Fusion can boot from an installation of Boot Camp. you don't nee to install Windows twice.
Maybe you are looking for
-
Missing green arrow on the sql server icon in object Explorer
I am using SQL Server 2008 R2 on windows 2008 server. i am able to get connected to management studio but the status light with white circle. the status lights in my Enterprise manager are no longer working. I am connected to the databases. I can't u
-
My Mac is using Verizon DSL now, I just added a Window XP, I am wandering how to connect both Mac and PC to DSL? I heard about "Panther Internet Sharing", could anyone tell me what is about, and how does it work? Thanks!!
-
Maven 3 + JavaFX 2 + EJB 3.1 + JBoss AS 7. Is this possible?
Good afternoon guys I'm new in the forum, and I'm studying recently JavaFX 2. My question is: Is it possible to create an application JavaFX 2 and make it available in a JBoss 7 application server? I'm doing some tests of architecture (a simple login
-
SCCM 2007 different between messagestate (-1) and (1)
Dear Exprt, Can you please tell different between below two option? Message ID MessageState MessageStateName MessageName 65535 -1 Accepted - No Further Status Program received - no further status 10002 1 Accepted Program received [email protected]
-
My wireless mouse disconnects after a long sleep, and only rebooting machine makes it come back.
My wireless mouse disconnects after a long sleep time, always overnight, and pushing buttons, replacing batteries, etc. doesn't wake it up again. I have to reboot the machine, sometimes losing data, in order to make it work again. I am kinda new to