Windows 8 Trackpad Not Working - Other Solutions Didn't Help

Hello all,
I recently installed Windows 8 Pro 64-bit on my Mid '09 MacBook. I had Windows 7 and 8 installed before and working, so I know it is compatible. Unfortunately, my trackpad does not work at all; No clicking, moving, nothing. I tried other solutions like changing the driver to the USB Input Device, but that will not work. I manually installed the 64-bit drivers from BootCamp v5. Here is a picture of my Device Manager: http://puu.sh/2Abyy
As you can see, I am missing drivers for my Coprocessor and an Unknown Device (Which I believe is my Trackpad, but it could be something else)
Thanks in advance for your help.

The update to boot camp is now available!
Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
http://support.apple.com/kb/dl1638
Boot Camp Support Software 5.0.5033
This solved the Trackpad Right Clicking issue (not working) as well as tapping.
The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

Similar Messages

HP Mini 1000, Windows 7, trackpad not working

Hi all,
I decided to format my Mini this morning to install a legal OEM copy of Win7 Pro. The first thing I noticed was there was no mouse cursor during the installation - not a big deal because I used a USB mouse. However, in Windows, the trackpad was still not recognized with the base level of drivers.
I've discovered that others have used the Synaptics driver for Vista on Win7 RC. Even though I'm using the final version, this doesn't work for me! I see a Synaptics tab in mouse settings, but there is no listed trackpad hardware. There are no relevant Windows updates either. I've also tried the Synaptics driver for WinXP from HP, but the same thing happens.
Has anybody had any experience with this? Any help would be greatly appreciated.
Thanks!
This question was solved.
View Solution.

Hi,
Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

HT1349 iTunes and Windows 8 will not work!!! Please help!!!

I just purchased a new sony vaio laptop computer with Window's 8 and I have uninstalled and installed itunes over 5 times and it will not work. When attempting to open it, a box pops up that says "ITunes has stopped working: A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.". I have motified the compatibility under each selection, I have changed my securing options and nothing works. I am overwhelmed and frustrated with this issue!! Please help how to make this work, so disappointed with itunes!!!

I have the same problem!

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

TrackPad not working unless "Diagnostic Tests" app running in background

My Torch 9810 TrackPad stopped working... I had downloaded the BlackBerry 7 OS free apps including those that provide "notifications" and "text to speech" and "speech recognition" capabilities that I don't mind having to fool around with, but I don't want to use all the time... they tend to take over buttons and configuration too much, so in my efforts to remove them or at LEAST get them to stop activating every time my BB moves in my pocket I was uninstalling things. I was told I had to reboot the device, and after doing so, the trackpad would not work.
So I go back and restore my backup... and the trackpad works... briefly: all the restored apps start asking for permissions etc. and run their configuration wizards whatever and then the trackpad stopped working again.
I've tried restoring AGAIN and have even downgraded the OS to get back to a "more stable" configuration with NO third-party software installed and no luck.
At this point, the trackpad does NOT work at all in any apps. I'm sure this is a software-related problem and not that the trackpad itself is broken and needs replacement.
I've used BBSAK to try to lobotomize it back to total "factory default" but that didn't work either.
I want to rule out a hardware failure (I'm SURE this is just software related, because it happened after a reboot and there had been no problems prior to this) So today I visit the BlackBerry.com website and search for "trackpad"
I get "trackpad not working" as the first result.
"TrackPad Not Working" KB article
At the very bottom of the page is a link to the "Device Self Test Application" instructions at:
"Diagnostic Self Tests" KB Article
So as soon as I start in with the Diagnostic Self Test app, it asks "Do you want a guided setup" and shows "Yes" and "No" buttons. Instinctively I try to use the TrackPad to navigate to "No" because I just want the trackpad diagnostic, and... the trackpad works.
I exit the "Diagnostic" app and go back to my home screen and it works again... briefly...
I re-enter the diagnostic app, the trackpad works, then I long-press the Menu key to go to different apps, and the trackpad continues to work.
So, it seems like keeping the 'Diagnostic Self Test' app running in the background is 'propping up' the TrackPad so it works, but when I exit the Diagnostic app, it stops working.
Also, the back of the device seems warmer than usual, as if the CPU is being driven hard.
I'm wondering if some rogue app might be crippling the TrackPad? And the Diagnostic Self Test app is somehow pushing the rogue app aside but the rogue app is "waiting as hard as it can" and driving the CPU hard?
Yeah, I'm grasping / speculating / making stuff up, but maybe someone can decipher what I'm saying and give me some clues?
If there's a "end user totally restore the firmware to a factory configuration" that will likely resolve this issue, I'm capable enough to try it rather than be without the trackpad (or the device being repaired under warranty) for days.

Note: I decided to try exiting the Diagnostic Self Test app to see if the TrackPad would stop working... or if using a specific app made it stop working... and after doing so, then rebooting etc. the TrackPad has now been working for many hours: dare I try to reinstall some of the apps I removed?

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4S

oenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

Self.close() or window.close() both not working in iOS8.0.2 safari

Both these function(self.close() and window.close()) are not working in safari.
These methods are used to close the tab currently opened.
So, if there is any workaround for this.

if you have programming questions then you should likely post them in the developer forums rather than the normal forums
Developer Forums

Wireless keyboard and trackpad not working.

iMac keyboard and trackpad not working after a couple days of not using. Hit power button on them and the light will blink, but will not function. Any help?

Have you tried a fresh set of Alkaline batteries?
Have you tried cleaning the battery contacts in them?

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Satellite A300-1EH - windows installer does not works accurately

Hello, this is my first post on this forum!
My windows installer does not works accurately.
What to do?
Soryy but i dont now much about computer systems.
Have I to reinstall this installer?
I'm waiting for your replys.

>My windows installer does not works accurately.
What do you mean exactly? Do you see some error? What happen exactly?
Maybe your CD is scratched or damaged.

Windows 7 Updates not working since Infinity insta...

Hi All,
I've had Infinity for a week and Windows updates have not worked since. My permissions are the same and i have Admistrator access.
The error code is 80070005
I have done a system restore which has removed Explorer 9 and am still having the same problem
Can anyone help me?
Thanks
Amanda

Same as the others my Win7 updates ok.
Hi,
The error code 80070005 usually means that you do not have enough permission to install updates.
First please confirm you have logged on an account with administrative privileges.
I suggest you to reset Windows update components and run Fix it.
Visit this link for information on how to reset windows update components:
http://support.microsoft.com/kb/971058
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Windows 8 Trackpad Not Working - Other Solutions Didn't Help

Similar Messages

Maybe you are looking for