Windows 8 Upgrade Capable Systems Official List

This is the official list of Windows 8 Upgrade Capable Systems from Lenovo
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT074688
This is the official link for download drivers, of course there are not yet uploaded for downloading. Coming soon...There are also at end of the page some tips for the upgrading to windows 8 and upgrade instructions for specific systems.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&AliasID=WIN8-INDEX
And Good Luck with your system upgrade…

Hi,
You can try this test: using Windows 8 upgrade Assisstant:
   http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8   
Note: My 5years olf laptopn runs Windows 8 Pro with only one missing the Bluetooth and this has been fixed.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Driver matrices for Win8 upgrade-capable systems - ThinkPad T Series

    To support the General Availabilty (GA) release of Windows 8, below are the direct URLs to the driver matrices for systems, within this family, that Lenovo has designated/certified as Windows 8 upgrade-capable. The direct links may save you time as you work through the upgrade process and require drivers compatible with your hardware configuration. The URLs were checked to be valid/working as of 10/25/2012. Please do post if you find errors.
    Hope this helps ease your transition.
    Cheers.
    The complete list of Windows 8 Upgrade-Capable Systems (current as of 10/24/2012):
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT074688
    The ThinkPad driver matrix master list:
    http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=TPAD-MATRIX
    Direct driver matrix URLs for systems in this product family: ThinkPad T Series
          T410    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-74582
          T410i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063286
          T410s   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063287
          T410si  http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063288
          T510    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063289
          T510i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063290
          T420    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167
          T420i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063244
          T420s   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063249
          T420si  http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063266
          T430    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073828
          T430i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073830
          T430s   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073829
          T430si  http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073831
          T430u   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT074912
          T520    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063271
          T520i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT063272
          T530    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073832
          T530i   http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073833
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

    Hmmm. I have a W520 and a dock. It's been running 8.1 since it's been out.
    Renee

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Upgraded operating system to windows 7 on hp pavilion a735w computer. lost audio to speakers

     upgraded  operating system to windows 7 32 bit on  hp pavilion a735w computer. lost audio to speakers, a driver was re-installed but there is still no audio.

    Hi:
    Try the windows 7 driver directly from Realtek:
    Accept the agreement. Download and install the first one on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...
    Paul

  • Running R/3 4.7 on a Windows Server 2008 System during an upgrade

    Dear all,
    I am plannung an upgrade project from R/3 4.7x200 to ERP6.0. The system is running on MaxDB. It's a single stack ABAP System.
    Currently the system is running on a 32 bit Windows Server 2003. During the project we want to go to a new x86 64bit hardware with OS Windows Server 2008.
    In order to use the speed of the new hardware also during the upgrade I want to move the systems to the new HW before starting the upgrade.
    The problem is that runnning R/3 4.7 on Windows Server 2008 is not supported by SAP. On the other hand running the target release ERP6.0 on Windows Server 2008 is officially supported by SAP. This information comes from the PAM.
    From the past I know that SAP allowed to run unsupported DB, OS and Release combinations during an upgrade project but I didn't find any information which fits to my situation.
    Does anyone have experience with this constellation? Is there an official statement concerning this request?
    Thanks for you support!
    Regards
    Bernd

    > So I opened the OSS Message (0000594749) to the component you mentioned but the support answered that this would be a consultant task to support me in this area (?!?)....
    I know one person who works for/in this component who did this several times to me too.
    > They asked me to open a thread here in SDN.
    That person did that too.
    > I send the message back to SAP and stated that I disagree with the statement that the confirmation of platform support is consulting...but until now I have no feedback.
    Just insist on a statement. If you still get the message back, contact the CIC (support dot emea at sap dot com) since you seem to be located in the UK according to your business card) and ask them to give you a different message processor.
    > So I hoped someone already has some official statement from SAP.
    Those special support statements are valid for a specific installation only so even if someone would have it for their installation it may not be valid for yours.
    > We would be running Production with release 4.7 on Windows 2008 for 3 weeks or so...and I will need official support for that, just for the case something goes wrong...
    I don't think this should be a problem. Technically the kernel supports it (according to the note) and also the database.
    Markus

  • How to generate Operating system user list from windows server

    Hi,
    is it possible to extract the following report from windows server, if yes how to do it,
    1) Operating system User list from the server along with following details User Name, User Permission, Last Login date, User Status, 
    2) is it possible to include staff id, and staff name while creating any Operating system user

    Hi FBMUIIa,
    Would you please let us know current situation of this issue? Please refer to Mr X’s suggestion and check if
    can help you.
    Please also refer to following article and check if this script can help you.
    List Local
    User Accounts Using WMI
    In addition, regarding your current requirement, it seems that scripts will help you to achieve the target better.
    I suggest that you would post the question in
    Official Scripting Guys Forum or
    PowerShell Forum. I believe we will get a better assistance there.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I restore a Windows 8.1 system image if I upgraded from Windows 8?

    I have a new HP Envy TouchSmart 15 Notebook PC 15-j003cl.
    It came with Windows 8 which I upgraded to Windows 8.1.
    I created the HP Recovery USB flash drive.
    From my reading I understand that the recovery USB flash drive is Windows 8 not 8.1.
    My question is:
    Can I restore a Windows 8.1 System Image Backup I made on a USB hard drive using the Windows 8 recovery USB flash drive?
    Or, to put it another way, what is the recommended procedure to back up an upgraded Windows 8.1 computer so, in the event of hard-drive failure, I don't have to start with Windows 8, upgraded to 8.1, re-install all my apps?
    Thanks
    Kirk

    OK here's where I am now and a few followup questions,
    Started with Windows 8.
    Upgraded from Windows Store to Windows 8.1
    Installed lots of apps and got everything running the way I like.
    I created a full system image of my upgraded 8.1 hard drive to an external USB hard drive.
    I have successfully created a recovery boot USB flash.  (did not copy recovery partition) I can restart the computer from
    it and navigate up to the point where it will restore my system image made after I upgraded to 8.1.  (I don't want to risk
    trying it for fear it will mess up my computer)
    Assume my hard drive failed and I have a new blank hard drive:
    My question is at this point does it matter that this was originally a windows 8 (not 8.1) computer?
    Will I be able to restore the image of 8.1?
    Does it matter which version of Windows I created the recovery boot USB flash on?  ( I can't tell when it boots from the
    recovery USB flash if it is running Windows 8 or Windows 8.1.
    I wish there was a way to test this without risking losing all the work I have done to configure the computer??
    Thanks,
    Kirk

  • Can't access old ver. 9, 11 & 13 clips after Windows upgrade

    In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips.  In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro).  Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive.  Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13.  Tried everything I can think of....any suggestions PLEASE!

    Very good, I completely understand.  Please understand "I am not a computer geek!"
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).  CORRECT!  Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO!  (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.)  NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them.  As such there is nothing to add to the timeline.  Last night I added to the NEW PE 13 a 22 min program I'm working on.  I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
    Now in response to a previous question you asked:
    1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
    the Presets" field there?  NO.... I can get to /Computer but there is no QuickTime there!  I did download QuickTime yesterday after your suggestion.
    2. You wrote
    Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
    Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
    Or other? What is the specific full name of one of these files that is giving the error message?
    With everything I've been trying, I'll have to recreate this series of events to answer directly.
    When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system?  Help me with a way to determine what the bit was on 9 & 11!
    Were two separate computers involved or did you manage to change the operating all on one computer?  All on one Computer
    The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
    you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace.  Help me understand!!!!  I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace".  But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
    WolcottVideo
        Can't access old ver. 9, 11 & 13 clips after Windows upgrade
        created by A.T. Romano in Premiere Elements - View the full discussion
    WolcottVideo (Mike Bruce)
    Thanks for the replies.
    My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
    Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
    Here is a basic description of where the details between us need to be confirmed...
    With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
    When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
    We will be watching for your reply.
    ATR
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    The only problem that I forsee is that some have reported problems getting machine-specific builds of Lion via Internet Recovery. Not sure if it's working yet or not. But you could give it a shot, I suppose. Basically what you want to do is 'prepare your computer for resale' - just like it came out of the box. Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and will paste below:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
        1.    Select Disk Utility from the main menu and click on the Continue button.
        2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
        3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
        4.    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Good luck,
    Clinton

  • Issues in Windows 8.1 system SRM 7.0 SP15

    Hi Experts,
    I am testing for SP upgrade project from SRM 7.0  SP12    to SP15 (SAPKIBKV15) in Windows 8.1 system.IE-11
    Issues-
    1.  I am unable to open any attachment(MS office files-   .xls  .xlsx   .doc & .docx) directly from SRM portal.  It is throwing error- The file is corrupt and cannot be opened.
    (However, I am able to open local copies).
    2. System is generating SC/POs with account assignment index as '00'  instead of '0001' , which results in failure of
    PO updating in backend system ECC.    PO status says- Erro in Process
    Can anyone please suggest me how to fix these ?

    Hi Somesha,
    Could you please advise whether the attachment is opening in Windows 7 system without any concern. And I also request you to advise if the attachments are opening in any other browser.
    And I also request you to check if the file name is correct comparing your BBP_PD details (File name) to the portal file name.
    For your second question, could you please provide some screen shots.
    Best Regards,
    Bharathi

  • Can I clean install a Windows 7 Pro System Builder on a Lenovo PC with Windows 8 preinstalled?

    Hi. I would like to clean install windows 7 on a Lenovo PC  that came with Windows 8 core preinstalled. I want to format the entire drive and remove windows 8 and clean install windows 7.  I already tried the clean install of Windows 7 Pro to get all of my drivers in line, and now I would like to buy a Product Key.
    Would  a Windows 7 Pro System Builder work in my case? Would it work just as smoothly as a retail version? I understand that the System Builder is an OEM version that includes the Product Key, COA, and DVD) Just want to make sure before I buy the System Builder version of Windows 7 Pro.  Thanks.
    Grazzie
    Solved!
    Go to Solution.

    that should be retail since it seemed to be used for pc upgrades either way your new system builder key should work. those are called refresh because they re-released them sincea bug was found in thier installers. Do you have any key in the computer atm? or is windows just waiting to be activated? 
    EDIT: its a good copy look here>  http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links
    Should you want to use the DVD images permanently, and don't own a product key yet, you can order a Windows 7 OEM or retail version from Amazon. The OEM reinstallation versions contain a DVD with a product key just like the retail versions. They are significantly cheaper, but lack a proper box packaging, and don't include technical support by Microsoft. The OEM key will work with the Digital River downloads, so you can just pick the cheapest one. Sometimes better editions are the cheaper ones, so all of the following links to Amazon offers might be worth checking. I've already tried to find good deals for all editions and linked to them here:
    I own a Y510p SLI, and Yoga 2 Pro

  • Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

    Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

    Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
    If you then click on that little triangle gadget you get this:
    A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
    The first method makes the association permanent. This method only applies to the currently selected document.

  • HT1947 I can't seem to get my earphones to work on my iPad mini whe using iTunes remote. I can stream to any Airplay capable system perfectly. Just want to be able to listen to headphones iTunes "wirelessly"

    I can't seem to get my headphones to work on my iPad mini when using iTunes remote.
    I can stream to any Airplay capable system perfectlyvia Remote and control iTunes on my iMac as advertised.
    Just want to be able to listen to iTunes on my iPad "wirelessly"

    Yay!
    I discovered this lovely little forum entry that solved my problem!
    (Remember this is for Windows, I'm not sure if the same will work for Mac)
    This is what you do:
    1: Have iTunes up and plug in your iPod.
    2: Hold the Sleep/Wake and Home buttons down until the iPod shuts down.
    3: When the screen is blank, release the Sleep/Wake and just hold the Home button down for about 15 seconds.
    4: After then, iTunes will recognize an I iPod in Recovery Mode.
    5: That's when iTunes will ask you to Update/Restore your iPod.
    I'm pretty sure those are the steps.
    (If anything is wrong, can someone fix it, please?)
    But that really does work.
    The writer said that his iPod was "stuck on the apple screen, and not going anywhere after that."
    That was my issue, so hopefully this will work for you!

  • Operations error occured when executing LDAP query to read members of AD group in windows 8 operating system using javascript and active-x

     My code javascript script  is
     objConnection = new ActiveXObject("ADODB.Connection");
     objConnection.Provider="ADsDSOObject";
     objConnection.Open("ADs Provider");
     objCommand = new ActiveXObject("ADODB.Command");
     objCommand.ActiveConnection = objConnection;
       objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN,    mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
    and objectClass='group' and sAMAccountName='"+GrpName+"'";
    objRecordSet = objCommand.Execute();
    This code executes successfully on window 2008 server machine,
    but gives "Operations error occurred" on windows 8 operating system
    on line of code highlighted above

    Hi,
    In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
    The Official Scripting Guys Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Thank you for your understanding and support.
    Best Regards,
    Amy Wang

  • Copy error when install Thinkpad HotKey features integration package under windows 7 U system

    Hey all,
    i upgraded operation system on my T61 to windows 7. All drivers work fine except  Thinkpad HotKey features integration package. i used update manager 4. it suggested me to install this package but when i run it it keep pop out windows and say that file can not be copy to  a folder ... 
    How can i solve this issue ? any clues ?
    Thanks,
    Eric

    Hi and welcome to the forum!
    Try installing it manually:-  http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74261
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • Feature Request: Custom uninstaller which executes actionscript function on uninstall

    Hi, My name is Ronald Kamp and I'm an IT Consultant at iDA MediaFoundry Belgium. I would like to request a feature. At the moment I have an application that writes a file to the app-storage of my application, to the user's documents and settings fold

  • How do i make a search bar?

    I am making an app where you can search for fish and then find their information. For example if you 'neon' then the page for the 'neon' fish will be shown in the results or take you directly to the page. How do i do this? Also, how can i monetize my

  • My daugher has put a password on her ipod cant remember it

    my daughter has put a password on her ipod and cant remember it

  • Gross salary from previous employer

    Dear SAP users Can you please tell me where to store Gross salary from previous employer data in PA.Is there any infotype other than 580 where we can store the above mentioned details Regards Sambit

  • Customer Validation Inside a Servlet...

    I am having some trouble getting the code correct to see whether the customer exists in the database, and if so, not inserting a new record. Otherwise, I just want to update the orders. Any suggestions would be greatly appreciated, I am new to Java!