Windows 8 USB recovery fails with CTOERROR.flg error
Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29
Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Similar Messages
-
System recovery fails with C++ runtime error
My Compaq CQ610-410US running Windows 7 is unusable. When using system recovery, either from CD's or Recovery drive, it fails with C++ runtime library program not found Contact HP Support. EIther way, Windows is loaded and system recovery screens appear. Once I respond to removing all accessories it then fails with the runtime error. Two questions, (1) is there a way around it? (2) will getting new recovery discs from HP even work?
This question was solved.
View Solution.All I can suggest is to order a set from HP and hope they work. This error is not a common one and the HP supplied recovery discs should work.
-
System Restore from USB/DVD failing with Localization Code error
After an extended period of strange behavior, I am working to restore my ENVY dv6 Quad back to the original factory Windows 8 and start over. I originally created both a USB recovery drive and DVD disks. The system runs through the entire recovery process, but after rebooting and processing through the software installation screens, it always errors out that the Recovery is incomplete. The following is in the CtoError.flg.txt file: [ 5:51:52.78] Required [CoreCountrySpecific]. But, Base OS is [Single Language] edition...
[ 5:51:52.78] Wrong edition is required...
[ 5:51:52.78] This is Customer image... CTO PANIC, .
Component: Windows 8 Preinstall Diagnostic Tools - TDC
Timing: FactoryUpdate
Error: Cannot upgrade OS edition to China for non-China image
Error: Action is not allowed
Next Step: Please reset your localization code or Win8 Configuration value via EEPROM
--------------------------------------------------------------[ 5:56:24.97] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[ 5:56:24.97] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 5:56:24.97] ------------------------------------------------------------------------------------------ [ 5:51:15.79] Start BBOffline.cmd...
UPDrv=[C:]
[ 5:51:15.79] Set UIA Error Code to 951
[ 5:51:15.85] Delete [FBI] folder.
[ 5:51:15.85] WinPE is 64bit.
[ 5:51:23.18] Starts [FixUps].
[ 5:51:23.18] ---------------------------------------------------------------------
[ 5:51:23.18] FixUps.cmd...
[ 5:51:25.50] FixUps.cmd completed...
[ 5:51:25.50] ---------------------------------------------------------------------
[ 5:51:25.50] Starts [Tweaks for SSRD].
[ 5:51:25.50] ---------------------------------------------------------------------
[ 5:51:25.50] SSRD Tweaks to change user default locale...
[ 5:51:25.50] SSRD_LANG.flg file was not detected... SKIP.
[ 5:51:25.50] ---------------------------------------------------------------------
[ 5:51:25.51] Launch PININST.exe for Offline ...
[ 5:51:35.78] Starts [Sleep 10 sec].
[ 5:51:45.93] Starts [Create RStoneFUpdate.INI].
[ 5:51:47.78] Starts [create 1GB Pagefile for offline]. I have tried this with both the original hard drive, and suspecting maybe it was a disk issue that has not shown up in a full disk scan, I have tried it with a new 256GB SSD drive also. They both result in the same error. Please help as I now have a completly unfunctional computer. DwainHi Mike:
The second chapter of this saga.
I did order the recovery USB.
I did what it was asking and wiped out the HDD clean.
But the system is still unstable.
It took a very long time to configure itself. Several times I had to run the process again because it would either not boot or it would be just sitting there at the attached screen.
Sometimes it would go to Win8 boot window, but then suddenly come back to the same screen.
It seems that HDD is completly out. What is the warranty on the HDD? This laptop is just two years old.
And a side note: we had to send it for repairs twice already for monitor issues; the keyboard is not flat; there are some loose parts inside. I really expected better quality from such a reputable brand as TOSHIBA.
-Ilya.
Attachments:
DSC_4459.JPG 4332 KB -
Windows update KB3000850 fails with error: 0x800700a1
Windows update KB3000850 fails with the following error: 0x800700a1
In WindowsUpdate.log there is the following:
FATAL: CBS called Error with 0x800700a1
In CBS.log there is the following error:
2014-11-25 11:17:54, Error CSI 00000ea8 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11395486# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa81c89d2f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa81c89d398, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd000003b]2014-11-25 11:17:54, Error CSI 00000ea9@2014/11/25:11:17:54.259 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]Tried all the suggestions in that thread, including running the DSIM tool.
Still getting the same error: 800700a1
I've uploaded the complete logs here: https://mega.co.nz/#F!wpZCHQRB!1GI7_PRJ3_S2nwITYVxDsg
This is a bigger snip from CBS.log around the errors:
2014-11-26 16:28:39, Info CSI 00000458 'From' Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.16384&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:39, Info CSI 00000459 Processing Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.17415&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:39, Info CSI 0000045a done
2014-11-26 16:28:39, Info CSI 00000e98 Regenerating payload files from delta files on component: [ml:280{140},l:186{93}]"amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.16384_none_0a1162f033fa01f6"
2014-11-26 16:28:39, Info CSI 00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-11-26 16:28:39, Info CSI 00000e9a Created NT transaction (seq 2) result 0x00000000, handle @0xf7c
2014-11-26 16:28:39, Error CSI 00000e9b (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867646# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa2a758d410->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa2a758d4b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9c@2014/11/26:16:28:39.304 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141126162432.log to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141120100026.cab to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141028123021.cab to WER report.
2014-11-26 16:28:39, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info CBS Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Error CSI 00000e9d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867645# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::TransferFile(flags = (ReplaceIfExists|OpenForBackupIntent), op = [8]"HardLink", odir = NULL, oname = [l:18{9}]"MSDTC.LOG", ndir = @0xa29be2af38, nname = [l:18{9}]"MSDTC.LOG", disp = (null))
[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867523# from CFileInstaller::DoComponentOperation(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867522# from CFileInstaller::ProcessComponentChange(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000ea0 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867521# from PrimitiveInstaller::CCoordinator::ProcessChange(Change 6.3.9600.16384 -> 6.3.9600.17415 for Microsoft-Windows-COM-DTC-Runtime, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral)[gle=0xd000003b]
2014-11-26 16:28:39, Info CSI 0000045b SMI Primitive Installer [done]
2014-11-26 16:28:40, Error CSI 00000ea1 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347192# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea2 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347191# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea3 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347190# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea4 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347189# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Info CSI 0000045c SMI Primitive Installer [started]
2014-11-26 16:28:40, Info CSI 0000045d 'From' Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17399&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info CSI 0000045e Processing Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info CSI 0000045f done
2014-11-26 16:28:40, Info CSI 00000460 'From' Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.16384&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info CSI 00000461 Processing Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info CSI 00000462 done
Is this the root cause?
2014-11-26 16:28:39, Info CSI 00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
Is there supposed to be a "null" going into whatever that is? -
Windows 2008 R2 backup fails with event 521 error code 2155348001
Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 1/10/2014 11:28:52 PM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: SHAQTUS.scdl.local
Description:
The backup operation that started at '2014-01-11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
RickHi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows.Launch contract failed with error: The app didn't start..
We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
Event Under: Applications
App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
Event Under: AppHost
The App Host has encountered an unexpected error and will terminate. The error is 0x8007000E.
Event Under: Microsoft-Windows-TWinUI/Operational
Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
Regards Ajinkya Ghare MCITP-Server Administrator | MCTSHi,
Try to put a machine disjoin the domain to see if the same issue occurs.
Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
1- Open "Local Group Policy Editor"
2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support -
Media Recovery failed with error 1111
Hi,
on 10g R2 on Unix I have :
Media Recovery Start
Managed Standby Recovery not using Real Time Apply
Fri Jun 24 10:56:52 2011
Media Recovery failed with error 1111
From alert.log :
Errors in file /data01/oracle/mydb/admin/bdump/hhhh_17637.trc:
ORA-01111: name for data file 523 is unknown - rename to correct file
ORA-01110: data file 523: '/oracle/product/10g/db_1/dbs/UNNAMED00523'
ORA-01157: cannot identify/lock data file 523 - see DBWR trace file
ORA-01111: name for data file 523 is unknown - rename to correct file
ORA-01110: data file 523: /oracle/product/10g/db_1/dbs/UNNAMED00523'
Any idea ?
Thanks.here is one test case, i ran into same issue. and reolved as below.
When Standby_file_management is set to “MANUAL” , if any data files added on primary database, These changes certainly won’t be altered in standby database.
After starting MRP process, it dies and terminated with the following errors.
Errors from Alert log file:-
Errors in file /oracle/app/oracle/admin/CC/bdump/cc_mrp0_22294.trc:
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
Errors from Trace file:-
MRP0: Background Media Recovery terminated with error 1111
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ARCH: Connecting to console port...
Check out from SQL, Which files need to be recovered on standby database?
SQL> select * from v$recover_file where error like '%FILE%';
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
+536 ONLINE ONLINE FILE MISSING 0+
SQL>
On Primary check out for actual naming convention:-
SQL> select file#,name from v$datafile where file#=536;
FILE# NAME
+536 DATA/c/datafile/undotbs9.595.750444337
SQL>
On Standby check datafile name:-
SQL> select file#,name from v$datafile where file#=536;
FILE# NAME
+536 /oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536+
SQL>
Make sure still standby_file_management is set to “MANUAL”, After performing media recovery again can be enabled to “AUTO”.
Rename datafile from standby database:-
SQL> alter database create datafile '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536' as 'DATA3/cc/datafile/undotbs9_595_750444337';+
Database altered.
Start the MRP Now:-
SQL> alter database recover managed standby database disconnect from session;
Database altered.
After creating the file, MRP will start applying archives on standby database. -
Media Recovery failed with error 368
The following error occurs on standby database---
ALTER DATABASE RECOVER CONTINUE DEFAULT
Media Recovery Log x.0000008973.arc
Recovery interrupted.
Redo code 6 enountered during in-flux buffer recovery
Some recovered datafiles maybe left media fuzzy
Media recovery may continue but open resetlogs may fail
some error occurred during recovering in-flux buffers
Recovered data files restored to a consistent state at change 138445558.
Media Recovery failed with error 368
Please advice. Thanks in advanceHere you have the complete reference for the command
that you executed :
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_15a.htm#SQLRF00802
[email protected]
Joel P�rez -
Backup Fails with Invalid RECID Error
Hi All,
Please help me to understand Caution -section
below text is from
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Backup Fails with Invalid RECID Error: Solution 2
This solution is more difficult than solution 1:
To create the control file with SQL*Plus:
1. Connect to the target database with SQL*Plus. For example, enter:
% sqlplus 'SYS/oracle@trgt AS SYSDBA'
2. Mount the database if it is not already mounted:
SQL> ALTER DATABASE MOUNT;
3. Back up the control file to a trace file:
SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
# The following commands will create a new control file and use it
# to open the database.
# Data used by the recovery manager will be lost. Additional logs may
# be required for media recovery of offline data files. Use this
# only if the current version of all online logs are available.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG
-- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 1
MAXLOGHISTORY 226
LOGFILE
GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M,
GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M,
GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K
-- STANDBY LOGFILE
DATAFILE
'/oracle/oradata/trgt/system01.dbf',
'/oracle/oradata/trgt/undotbs01.dbf',
'/oracle/oradata/trgt/cwmlite01.dbf',
'/oracle/oradata/trgt/drsys01.dbf',
'/oracle/oradata/trgt/example01.dbf',
'/oracle/oradata/trgt/indx01.dbf',
'/oracle/oradata/trgt/tools01.dbf',
'/oracle/oradata/trgt/users01.dbf'
CHARACTER SET WE8DEC
# Take files offline to match current control file.
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
# Configure RMAN configuration record 1
VARIABLE RECNO NUMBER;
EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
DEBUG 255');
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE
# All logs need archiving and a log switch is needed.
ALTER SYSTEM ARCHIVE LOG ALL;
# Database can now be opened normally.
ALTER DATABASE OPEN;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
# End of tempfile additions.
5. Shut down the database:
SHUTDOWN IMMEDIATE
6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
STARTUP NOMOUNT
CREATE CONTROLFILE ...;
EXECUTE ...;
RECOVER DATABASE
ALTER SYSTEM ARCHIVE LOG CURRENT;
ALTER DATABASE OPEN ...;
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.Please help me to understand Caution -section
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
Rgds. -
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-WaltYes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt -
Tablespace Point in Time Recovery fails with RMAN-06026:
I have cataloged with RMAN the datafiles from Snapshot backup. Still it fails with the following error.
RMAN> RECOVER TABLESPACE TSPC UNTIL TIME "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')" AUXILIARY DESTINATION '/tmp/auxpran';
Starting recover at 03-APR-13
using channel ORA_DISK_1
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='Ebgt'
initialization parameters used for automatic instance:
db_name=ORCL
db_unique_name=Ebgt_tspitr_ORCL
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/tmp/auxpran
log_archive_dest_1='location=/tmp/auxpran'
#No auxiliary parameter file used
starting up automatic instance ORCL
Oracle instance started
Total System Global Area 292933632 bytes
Fixed Size 1336092 bytes
Variable Size 100666596 bytes
Database Buffers 184549376 bytes
Redo Buffers 6381568 bytes
Automatic instance created
Running TRANSPORT_SET_CHECK on recovery set tablespaces
TRANSPORT_SET_CHECK completed successfully
contents of Memory Script:
# set requested point in time
set until time "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')";
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 03-APR-13
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=19 device type=DISK
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: copied control file copy
input file name=/tmp/auxpran/controlbc.ctl
output file name=/tmp/auxpran/ORCL/controlfile/o1_mf_8opkv8v4_.ctl
Finished restore at 03-APR-13
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until time "to_date('03-apr-2013 02:18:00','dd-mon-yyyy hh24:mi:ss')";
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 2 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 5 to
"+DG_DATA/orcl/datafile/tspc.268.811733685";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 3, 2, 5;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /tmp/auxpran/ORCL/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 03-APR-13
using channel ORA_AUX_DISK_1
One or more auxiliary set datafiles could not be removed
Removing automatic instance
shutting down automatic instance
database dismounted
Oracle instance shut down
Automatic instance removed
auxiliary instance file /tmp/auxpran/ORCL/controlfile/o1_mf_8opkv8v4_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 04/03/2013 02:32:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Could anyone please reply ASAP?
Regards,
PranamI had created a snapshot of the database(datafiles and archivelogs) and cataloged them.
CATALOG START WITH "+TBL_DG_DATA/ORCL/DATAFILE/" NOPROMPT;
catalog start with "+DG_ARCH/ORCL/ARCHIVELOG/" NOPROMPT;
The time i gave was after the snapshot was created.
When it failed the first time I created another controlfile using
sql "alter database backup controlfile to ''/tmp/auxpran/controlbc.ctl''";
And ran the recover command after the time after i generated this controlfile. Changed nothing else. TSPITR completed successfully. But it had failed first time. Cannot figure how it ran the second time but failed the first time.
Removing automatic instance
Automatic instance removed
auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_temp_8opndd87_.tmp deleted
auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_3_8opnd1o6_.log deleted
auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_2_8opncy32_.log deleted
auxiliary instance file /tmp/auxpran/ORCL/onlinelog/o1_mf_1_8opncv7d_.log deleted
auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_sysaux_8opn516p_.dbf deleted
auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_undotbs1_8opn4j14_.dbf deleted
auxiliary instance file /tmp/auxpran/ORCL/datafile/o1_mf_system_8opmyvly_.dbf deleted
auxiliary instance file /tmp/auxpran/ORCL/controlfile/o1_mf_8opmy14q_.ctl deleted
Finished recover at 03-APR-13 -
Import (imp) failing with IMP-00010 error
Hi Experts,
I am doing import to Windows from an export dump that was taken on Solaris 10. But the import is failing with the following error.
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
I checked the source and target oracle versions and NLS_LANG parameter.
In both the databases NLS_LANG parameter is set to AMERICAN only. But the oracle versions are different
Source
OS : Solaris 10
Oracle version : *11.2.0.2*
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : *10.2.0.2.0*
While importing into windows env, it is failing..
Please let me know the reason why the import is failing?
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?Hi,
The IMP indicates this this error is coming from the old imp. This dump file could be from the expdp utility, which would require you to use the impdp utility.
Source
OS : Solaris 10
Oracle version : 11.2.0.2
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : 10.2.0.2.0
While importing into windows env, it is failing..
What really matters here is the compatibility level. If your source and target compatibility levels are the same, then with Data Pump, the dumpfile created on the source, would work on the target. If the compatibility levels are different, then use expdp with the version parameter set to the compatibility level of the target.
Please let me know the reason why the import is failing?Check the suggestions above first.
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?It could help, but first check to see if you are using the right utility and then check the compatibility versions.
Dean -
Token-based server access validation failed with an infrastructure error
Hi
We have a new Win 2008 Enterprise x64 server running SQL 2008
When we try to connect to the server using Windows Authentication, from a user account which is a domain administrator, we get the following message:
"Token-based server access validation failed with an infrastructure error"
What needs to be configured here for this to work ?
Thanks
BruceHi,
I am encountering the same error message but it is more around the login, this problem happens only on one server but it is fine on another three, my investigation show it is a ghost SID associated with AD user account
Background
1- An Active Directory (AD) account was created for a user [Domain\UserA]
2- A SQL login was created for the account above and then granted access to a number of databases
3- The AD account was renamed/modified to [Domain\UserB]
At this stage the user would encounter an error when connecting to the server
The sql log show this error message
Error: 18456, Severity: 14, State: 11.
Message
Login failed for user 'domain\user'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: xxx]
Action on Server 1 SQL (the one with the problem)
1- Dropped the user from the databases
2- Re-Created the login from the windows account [Domain\UserB]
3- Created the user in the respective databases
But the user still unable to connect to the server
Investigation
On server 1, the SID of the user in SYSUSERS was Matching SYSLOGINS and matches with result of SUSER_SID(Domain\UserA)
But it does not match the SID in the AD
The rest of the servers all have the correct SIDs
When I use SUSER_SNAME(Incorrect-Sid) and SUSER_SNAME(Correct-Sid) on this server they both return [Domain\UserB]
The problematic server is always returning the incorrect SID when recreating the user login and when using SUSER_SID(Domain\UserA) as if it is cached somewhere.
I can't specify the SID when creating the SQL login because it is using the Windows account
Your ideas on how to fix this problem are much appreciated
Regards,
DGL
Maybe you are looking for
-
Display number as Date in report
Hi, We are getting the date info in the format ddmmyyyy and have to map it in the number field. I want to show this date info in the report as dd/mm/yyyy. For example, if the date is 10072009 (10th July 2009), it should be displayed as 10/07/2009 in
-
Move RE cost from Contract No to Building/Property within RE module instead of FI
Hi, RE experts: Our company's process moves costs from contract to Buildings/Properties by posting a FI document that will debit to Buildings/Properties and credit to contract nomber. Is there any way to move the cost from contract to Buildings/Prope
-
i Cant scroll on the game. Its really hard to play without. And i play on firefox. So i would like to get help in this matter.
-
What happens 2 old trace files in Oracle 11g?Is there any automatic handlin
Hi,I dont see old trace files in my trace directory in oracle 11g 11.1.0.7 database thats in /diag/rdbms/DB_NAME/trace directory.I dont have any auto delete procedure for trace files. Just wanted to know if theres any autodelete/autoarchive procedure
-
Method Graphics not entered, why?
Why the method Graphics(Graphics g) is not beeing entered? import javax.swing.*; import java.awt.*; import java.awt.event.*; public class SwingApplication extends JFrame public SwingApplication() super("SwingApplication"); Co