Windows 8 - VPN 720 error after installing some of the lenovo updates

Hi,
I have T530 and windows 8 x64 on it, I have noticed that after some time of using it I was unable to connect to PPTP VPN or my SSL VPN.
The error stated during the connection to the PPTP VPN (windows client) was 720 error.
I restored my windows via recovery to the point one week before and VPN started to work again. I was trying to isolate the problem after which installing I became having such problem. What I have noticed is that there are two lenovo updates that are casing this problem (I'm not excatly sure which one it is, becouse after installing them I had to restart computer about 2 or 3 times to reproduce the problem). After the problem occurs it's constant and I could not find a solution this.
The updates I am talking about are:
- Intel PRO/1000 LAN Adapter Software for Windows 8 64-bit (ver 12.1.77.0 - no previous ver installed)
- Lenovo Settings Dependency Package - 8 [32,64] (ver 1.0.5.8 - no previous ver installed)
I've notcied that there was a similar problems on older versions of windows - does anybody know if those instrucions are valid for win8?
http://forums.lenovo.com/t5/Windows-XP-and-Vista-discussion/Error-720-Dial-Up-Networking-could-not-n...

look and search 720 in MS  Windows 8 networking forum  , you are not alone
Jiří Cvrk
TP YOGA S1 .. X220, X61, T22, ms w8nd8ws

Similar Messages

  • What do I do after I got an error after trying to download the security update?

    What do I do next when I got an error after trying to download the security update?

    Thank you for providing these details.  It makes helping you much easier.
    You have a 16GB iPad, but have only 2.4GB available.  This is likely contributing to the issue.  This amount, 15% of the iPad's storage capacity, is the minimum free space you should have.  But when updating iOS, you should expect the new version to use somewhat more space than the old.  I believe going to Settings > General > Usage and freeing space will help with your issue.
    Another recommendation would be to use iTunes on your computer to do the update instead of over-the-air.
    I believe either one of these would help you.  Both would be at least as good.

  • Receiving I/O error after installing Acrobat 8.1.2 update

    After installing the update, I cannot scroll or page through a PDF doc without constantly getting this error message:
    There was an error processing a page. A file I/O error has occurred.

    I closed Acrobat, then closed other apps, then re-opened the PDF in Acrobat. Seems to be ok now.

  • Error after Installing PDK -  (404 The requested resource is not available)

    Hi
    I recently installed my PDK over my existing Portal 6.0 using SDM Tool. I downloaded PDK_6.0.14.0_BusinessPackage from SDN. I deployed pdkcontent6.0.14.0.SCA file using the SDM Tool. It installed successfully. But when i go and check the links under 'Portal Content Development ' , it gives me a 404 - The requested resource is not available.
    Please help out.
    Regards,
    Murali.

    Hi All,
    I am also unable to deploy pdkcontent6.0.14.0.sca completely. I get the exception below
    ===========================================================================
    Deployment started Thu Jun 22 11:01:34 IST 2006
    ===========================================================================
    Starting Deployment of TutWD_KMBrowser
    Finished with warnings: development component 'TutWD_KMBrowser'/'local'/'LOKAL'/'0.2005.11.09.09.51.44', grouped by software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
    Caught exception during application startup from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Error occurred while starting application local/TutWD_KMBrowser and wait. Reason: Clusterwide exception: server ID 309660150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/TutWD_KMBrowser cannot be started. Reason: it has hard reference to resource com.sap.km.application with type application, which is not active on the server.
         at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:596)
         at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
         at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
         at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:147)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4705)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4610)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4583)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/com.sap.km.application', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/com.sap.km.application
         at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4359)
         at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:588)
         ... 21 more
    Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/TutWD_KMBrowser', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/TutWD_KMBrowser
         at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
         at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
         ... 23 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/TutWD_KMBrowser
         at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
         at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
         at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
         at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
         ... 24 more
    Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.km.application
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
         at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
         ... 29 more
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment of TutWD_KMBrowser finished with Warning (Duration 9504 ms)
    Starting Deployment of pdk-content
    Finished with warnings: software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
    No further description found.
    Deployment of pdk-content finished with Warning (Duration 1152 ms)
    ===========================================================================
    Deployment ended Thu Jun 22 11:01:47 IST 2006
    ===========================================================================
    Please resolve this issue.
    Regards,
    Amjad

  • After install i got the error firefox does not start, safe mode does it work

    Rapport-ID
    bp-7e0bbdc9-3b5b-44db-8831-d8a352130608
    bp-3447b290-e4e1-4690-bbf7-14ae72130608
    bp-2894daaf-c601-4dbd-9031-001fe2130608
    This is the error after installing firefox on the pc. Safe mode is well working. i also send the crash report.
    Please give me a tutorial to fix this.

    hello, please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.

  • Please Help Me, Windows Form Error After Install

    help me to fixed this errors after install visual basic
    Instances of this error (1)
    1.
    Hide Call Stack
    at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
    at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
    at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
    at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
    at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
    at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
    at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
    at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
    at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
    at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
    at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload) 

    Hello,
    I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
    To narrow down this issue, I would recommend you check the following suggestions.
    1. Rebuild your project and debut it to see whether it could work.
    2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
    3. If #2 works too, then you could share the screenshot and the detailed error message with us.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HP4501e "print spooler off" error after installing printer update

    Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

    Loralee,
    ??  I am sorry the computer is not working.  I don't work for HP and cannot comment on lawsuits or other calamities.
    If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    If you are using a Notebook:
    Close all your programs and shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    Reminder:  Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
    This does not fix severe Operating System errors -- it is just a device reset.  It can fix minor problems that updates sometimes cause.
    ============================================================================
    I am sorry you are having so much trouble.
    Other help:
    HP Mobile Printing
    You can call HP for help --
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    Happy New Year, Loralee!  I know it seems to be getting off to a rocky start!
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • 'CRT not initialized' error after installing MS Office 2010

    Hi,
    I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
    - OS : windows 7 Enterprise (32bit)
    - Labwindows/CVI (v12.0.0 (422))
    - MS Office 2010 (word, powerpoint, excel)
    #1. clean install windows 7 (32 bit)
    #2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
    #3. compile and run attached test program : SUCCESS
    #4. online update windows 7 (service pack, explorer 9, and etc)
    #5. compile and run attached test program : SUCCESS
    #6. install MS Office 2010
    #7. compile and run attached test program : 'CRT error'
    #8. uninstall MS Office 2010
    #9. compile and run attached test program : SUCCESS
    I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
    Thank you in advance.
    Attachments:
    step7-CRT error.jpg ‏31 KB
    test program.zip ‏3305 KB

    More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
    To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
    Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
    Could you tell me why this problem occur?

  • Error after Install SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
    It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
    Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
    Error! Connection failed to node (local) for database NSP:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
    Someone could help me?

    Hello Marques Polastri ,
    ->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to  C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
    Try to connect to the database NSP & let us know the results.
    -> Please update with output of the following commands:
           dbmcli db_enum
           dbmcli -d NSP -u <control>,<pwd> db_state
    Thank you and best regards, Natalia Khlopina

  • HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

    After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

    Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
    Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
    Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

  • Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

    Hi,
    I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
    I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
    After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
    =========================
    Relinking module 'ADCONV.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
    Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
    Relink of module "ADCONV.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'AFTBLGEN.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
    Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
    2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
    2010
    Relink of module "AFTBLGEN.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'APPR60UE.dll' in product fnd ...
    Removing any existing temp directory
    rm -rf temp
    creating the temp directory
    mkdir temp
    changing permissions for the temp directory
    chmod 777 temp
    Getting the object file names for this APPR60UE.dll
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
    appr60ue.LIST
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
    *** target pattern contains no `%'. Stop.
    Unable to get the objects for module "APPR60UE.dll".
    See error messages above (also recorded in log file)
    for possible reasons for the failure.
    adrelink is exiting with status 1
    =========================================
    Has anyone faced something similar in the past?
    Regards,
    Neeraj

    Hi Helios,
    That got resolved after I added the location of the dll in the PATH.
    Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
    The log looks like:
    Relinking module 'fndcpesr.exe' in product fnd ...
    gnumake -f
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
    Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
    2010
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
    warning: overriding commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
    warning: ignoring old commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
    warning: overriding commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
    D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
    warning: ignoring old commands for target
    `D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
    link.exe
    -MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
    -NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
    -OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
    D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
         D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
    D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
    /LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
    "LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
    LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
    LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
    LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
    gnumake: ***
    [D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
    Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
    2010
    Relink of module "fndcpesr.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Regards,
    Neeraj

  • Acrobat Error after installing CS5 Design Premium

    OK, I'm going to try and explain exactly what I am doing and when I'm getting this error so please bear with me.
    I am trying to set up a test computer for testing CS5 in our production flow. After reading some of the posts here and other places I felt it best to start with a clean system on my test machine.
    I have a Intel Dual-Core 2.66GHz machine with 2GB Ram and system OS 10.5.8 (Don't have access to Snow Leopard at the time) OS was loaded clean, nothing on the machine prior to loading the system.
    We are a large company and we are on a maintenance program for our Adobe Software so all I received as a installer for CS5 was a .dmg file called DesignPreium_CS5_LS1.dmg. I'm assuming that this installer is just an upgrade installer from CS4 to CS5 because it did not install Acrobat 9 Pro after running the installer. This is where my problem starts.
    I had already read that there was not an upgrade for Acrobat and to just use the one that came with CS4 so that is what I am trying to do. I got out my CS4 Design Premium disks and installed just Acrobat 9 Pro.
    The problem I'm having though is that when I try and launch Acrobat it gives me the error that says "Suite Product Activation Needed" (Please see image below. So that's what I tried, I launched InDesign CS5 and then Acrobat 9 Pro but I got the same error.
    Is there any way to get Acrobat 9 Pro running on this machine without first installing other components of CS4 that were on the installer disk with Acrobat 9 Pro? Doing this would make it very difficult to ever install a clean copy of CS5 in my opinion. When I start with a fresh machine I want to start with a fresh machine, not install components just to uninstall them later so that certain parts will work.
    If I haven't made it clear what I'm trying to do ask and I'll try and fill in the blanks.
    Any thoughts? Hopefully you see this Dov and can add some insight on the options I have.

    Hi,
    I know from another site that you solved this problem with using a CS3.3 disc that you had. Exactly the same thing is happening to me. Only difference is I just wanted to free up some space and have been using the CS5 for a few weeks now so uninstalled the CS4 as it seemed odd to keep it on when it's not necessary. But now this. I have gone back to the download page and tried to reinstall but nothing. I'm guessing I will have to dig out my cS4 discs but just thought I'd see if there was a more logical alternative?
    Jane

  • My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

    Hi There. .
    I've some problem here. .
    My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
    I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
    Any body may have a sollution for me?

    *Moved to Android development*
    Hopefully you can get some help here.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Sims3 DVD authentification error after installing PSE 6

    I have a strange problem with my MacBook Pro 15". I bought Sims3 and played it some weeks, then I bought PSE 6 for my photo editing needs. Now, the first time I wanted to start Sims 3 after installing PSE 6, the Sims 3 game starts, but when launching the city where to chose from my families, the error message occurs: "Disc-Authentification failed. Check of the Sims 3 Disc has failed, it could not be checked whether the disk is a valid disk."
    Before asking the EA support, I checked updates (none), repaired access rights, checked my disc and reinstalled Sims3.
    The EA Support hotline asked me to do a firmware update for my superdrive, but i don't find an available download.
    Can someone help me?

    Put the first disk in again, and set it to just install the DVD SP content, livetype, and motion content disks... if it fails, call Apple, as you might have a bad disk there.
    But the applications themselves are already installed. What you're missing is the templates on those disks onlly.
    Seems to me you can also just put the other disks in and install them one at a time.
    Also, if this is an upgrade from a previous installation (FCP 5 or whatever) you really should do it as a clean install... all you need to have is your previous serial number.
    Jerry
    Message was edited by: Jerry Hofmann

  • Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

    Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
    Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

    Hi Jeff,
    Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
    Hope it goes well,
    Rick

Maybe you are looking for