Windows 8 won't install on my Macbook Pro, have installed Parallel Desktops 9.

Am trying to download Windows 8 onto my Macbook Pro. I've installed Parallel Desktops 9. The Windows download keeps telling me it can't download because the setup file is not supported by OS X. Parallel Desktops is telling me I can install Windows via a PC, DVD or image file. Does this mean I cannot install Windows by downloading it.

Similar Messages

What version of Windows 7 should I use on my Macbook Pro to run parallel operating systems? 32 or 64 bit?

What version of Windows 7 should I use on my Macbook Pro to run parallel operating systems? 32 or 64 bit?

64 bit.

Windows 7 won't boot in modified MacBook Pro

I've installed a 750 GB hybrid drive into my optical bay, and kept the original 250 GB SSD in the primary bay. I've moved Mac OS to the hybrid drive. Despite having a bootable USB with Win 7 (created in XP using the Windows download tool, and a Win 7 32-bit ISO downloaded from Microsoft's support forum), and the Apple drivers on a 2nd USB stick downloaded with Bootcamp, the Bootcamp assistant doesn't appear to recognize the bootable USB, as Windows Installation will not launch when Bootcamp quits. When I look at my primary drive, it is formatted as FAT 32, and is clean & empty!
Peter

Thank you, Csound1; this makes sense (I assume OS X prefers residence on the primary drive from the boot point of view). One other question- I'd rather work in 64-bit mode if possible, and have the Win 7 64-bit version as well. When I download the 64-bit ISO using win XP (inside VMWare fusion), the bootable USB download tool gives me an error- I understand that writing a 64-bit ISO from a 32-bit platform is an issue. Do you know how to address this, or where I can look?

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

Can I install Windows 7 System Builder Addition on a MacBook Pro?

Can I install Windows 7 System Builder Addition on a MacBook Pro?

rmsmac,
do you mean Addition, or Edition? Is it a 32-bit version of Windows 7, or a 64-bit version of Windows 7?
Why don’t you give it a try, and report back on whether you’re able to or not?

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

Ah, sure it actually won't. I have the same problem, and I contacted Apple Support. They told me that there is an incompatability between the iphone 5 and MacBook Pro Retina such that Bluetooth pairing is not possible.
The Support Agent actually had the audacity to tell me this was part of the design of the OS on the MacBook Pro, like Windows people saying, "That's not a bug. It's a feature!!"
Personally, I think this is insane. While I was trying to tether the iphone to the MacBook Pro retina for an internet connection, there are other reasons related to file transfers for which one would want to pair the iphone 5 with the MacBook Pro retina.
I am hoping this "feature" is fixed in iOS 7, and/or in some dot release of Mac OS 10.8.
By the way, the personal hotspot feature on my Verizon iphone 5 works great either via a wifi or USB connection. There are occaisions, however, when one would 1) not have a USB cable, and/or 2) have another wifi relationship between the phone and a network that one would not want to have to "forget" in order for it not to connect to that wifi network. The Macbook will not find the iphone as a wifi hotspot if the iphone is connected to wifi in the first place. At least mine won't.
WWSJS??? What Would Steve Jobs Say???!!!
OZones

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

Does the Macbook Pro have a program to run Windows? If not, what is the best program to do so?

Does the Macbook Pro have a program to run Windows built in? If not, what is the best program to do so. Purchasing a new Mac.

No. The Mac does not have anything to run Windows
You must install either virtualizrion software or use BootCamp to create a partition for Windows. Once you have done that then you must install Windows.
Allan

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

I need to recover deleted notes from my iPhone 6 with PhoneRescue but it won't open on my MacBook Pro OS10.7.5

I need to recover deleted notes from my iPhone 6 with PhoneRescue. I installed the App but it won't open on my MacBook Pro OS10.7.5

The Software Update pane of System Preferences won't show full version upgrades. If your Mac is compatible with Yosemite, you can either download it from the Mac App Store or order a download code for Mountain Lion from the online Apple Store.
(122645)

HT4818 Why is that window 7 run with my MacBook Pro have no audio and sound?

Good day everyone,
Why is that my 'Window 7 Ultimate' run with my MacBook Pro have no audio and sound?
I've successfully install it with Bootcamp 4.0.
Does anyone know what's wrong? How to fix it?
Thanks.

Good day everyone,
Why is that my 'Window 7 Ultimate' run with my MacBook Pro have no audio and sound?
I've successfully install it with Bootcamp 4.0.
Does anyone know what's wrong? How to fix it?
Thanks.

Safari won't open on my MacBook Pro. How do I get it to open?

safari won't open on my MacBook Pro since I inadvertantly downloaded and then trashed Genieo. I can open it is safe mode. How do I get it to open?

Adware Removal Guide
Genio
Instructions:
http://www.thesafemac.com/arg-genieo/

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Complete novice! how do i install ms office on macbook pro - have disks and USB superdrive

Hi, I'm a complete novice. How do i install MS Office on MacBook Pro - have disks and USB Superdrive?

Attach the drive via USB. Insert the disk into the drive. It'll show up on the desktop. Double click the disk icon and then run the installer.
Matt

Windows 8 won't install on my Macbook Pro, have installed Parallel Desktops 9.

Similar Messages

Maybe you are looking for