Windows 81. Update Fails with 0xC1900101 0x30017
Updating a laptop form 8 to 8.1 and get the following error at the end of the update. 0xC1900101-0x30017. The system them reverts back to 8.
Any help would be appreciated.
Thanks,
Larry
This error might be to the BIOS .
BIOS upgrade may fix the issue.
Check the below links.. Similar issue got solved when they upgraded the BIOS
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-probook-430-g1-update-windows-8-1-error-0xC1900101/td-p/3031047
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/windows-update-error-0xc1900101-0x30017/d46cb654-d7c4-4fa5-a976-d6d6527b21e4
http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
Please vote if this is helpful
Ajo Abraham.
MCP, MCTS
----------------------------- Knowledge is Power-----------------
Similar Messages
-
Windows 7 update fails with error 8000FFFF
I've got a Windows 7 x64 installation that I've had for around three months. Everything has been fine and working up until a few weeks ago. When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF. Update used to work, but then suddenly quit.
I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem. In frustration I decided to put in a spare hard drive and install Windows 7 from scratch. I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
I have the same situation with a Windows Storage Server 2008 x64 that I have as well. It has been runing for about six months or more and updates were working fine. Then update started failing for the same or some other reason about the same time. On this machine I can start the update and see it report a percentage downloading the update. It gets to about 5 or 6 percent and then fails.
Is there some possible networking issue at play in my situation? I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those. I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet. I have not changed anything or any settings in my firewall at all. Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work?
All of my machines are pretty much Intel based. Win7 box is a Core2Duo on an EVGA 680i motherboard. The servers are Intel Xeons with Intel motherboards, chipsets and nics.
Thanks for any advice and helpWow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
Any new ideas?
Thanks,
Win7 x64 SP1
Package KB2633873 failed to be changed to the Installed state.
Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"
Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu" -
Windows 8 Windows Update fails with error 80244FFF
Windows 8 Windows Update fails with error 80244FFF
Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
update failed with lightroom CC. Tried retry several times no success. says contact customer support (49)
Same here, New user so everything was a new install ( no existing lightroom or photoshop installed ) when it tried to do the updates I get the same error message. I am a monthly subscriber so the install was across the internet. Windows 8.1
-
Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall. The IT guys have opened up the ports and URL's specified in the Adobe documentation. I have also captured the network traffic of both the failed and successful downloads for IT to examine (using Little Snitch), however they can find nothing to account for the problem. Adobe just seems to "give up and die" after about 2-3 minutes. Why is this? How can I or IT fix this?
Can I send the above log files to someone familiar with these issues for examination?Hi Gveo,
Please follow the article: Creative Cloud Help | About Creative Cloud Packager which will help you to get your issue fixed.
Thanks,
Ratandeep Arora -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
Windows.Launch contract failed with error: The app didn't start..
We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
Event Under: Applications
App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
Event Under: AppHost
The App Host has encountered an unexpected error and will terminate. The error is 0x8007000E.
Event Under: Microsoft-Windows-TWinUI/Operational
Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
Regards Ajinkya Ghare MCITP-Server Administrator | MCTSHi,
Try to put a machine disjoin the domain to see if the same issue occurs.
Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
1- Open "Local Group Policy Editor"
2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support -
When deploy multiple updates, some updates fail with Hash does not match expected
If I deploy a few updates (less than 5) the deployment completes without any issues. If I have a lot of updates, most the updates install with no issues but some, and not always the same update, fails with an error in the CAS.log on the client
that states "Hash does not match expected" after several reties the update will download and install.
What could be causing this?
I have setup a new folder that is not on the root of the drive. This has not help with this issue but is handy in organization.
Ashley
County of San Bernardino
Assessor\Recorder\Clerk
Automated System AnalystIt you don't do anything and the hash calculates and downloads correctly then I would look to a network error of packet corruption or something wrong with the DP.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com -
Please help: Utility used to install the update failed with exit code {0}.
Hi,
I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
Utility used to install the update failed with exit code {0}.
I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
Thanks,
WillThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting. -
Utility used to install the update failed with exit code 1
Hello!
When I try to install an update on my system, the following happens:
# smpatch update -i 119116-22
Update 119116-22 will not be downloaded since it already exists in the download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 119116-22.
Utility used to install the update failed with exit code 1.
Validating patches...
Loading patches installed on the system...Done!
Loading patches requested to install.Done!
Checking patches that you specified for installation.Done!
Approved patches will be installed in this order:119116-22
Preparing checklist for non-global zone check...Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.
Failed to install patch 119116-22.
ALERT: Failed to install patch 119116-22.
Does anyone know how to fix this?
TIA
StephanThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting. -
Itunes new update failed with an error R6034
Itunes update failed with several error R6034
Follow the directions of tt2 in: https://discussions.apple.com/thread/5822086
-
Updates fail with error 1328 I have re-installed XI Pro twice without problems.
2
William D. Burstow, CPG, QP
Consulting Economic Geologist
Tel: 541.573.1078
Email: <mailto:[email protected]> [email protected] -
Critical patch update fails with error code 73
RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P. -
Resolved - CS6 Updates Fail with U44M1P7
CS6 Design & Web Premium - all product updates fail with U44M1P7 since Creative Cloud was introduced.
Two questions:
1. I saw earlier case which pointed to http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html. For my clarification, does this solution mean I have to Uninstall & Reinstall CS6 from scratch?
2. I did not mean to install, nor do I want Creative Cloud. So how do I get it off my computer and keep it off?
Thanks, George
UPDATE:
This was a Windows7 Ultimate 64-bit system
No Replies, but persistence prevails ...
Following resoplution steps worked for me, resulting in all products being Up To Date post reboot:
1. Start > Control Panel > Uninstall "Adobe Extension Manager CS6"
2. Reboot
3. Reinstall "Adobe Extension Eanager CS6"
a. I had original download files saved and used them.
b. But, download from http://www.adobe.com/exchange/em_download/em6_download.html produced same files
4. Reboot
5. Performed Validations:
a. Started Adobe Application Manager (which starts Creative Cloud)
1. Select "Install or update an application" and all products are noted as "Up to date".
b. Started Adobe Creative Cloud
1. Select "Install or update an application" and all products are noted as "Up to date".
c. Selected "Help > Updates" from within Dreamweaver, Fireworks & Photoshop (64-bit) CS6 (random choices)
1. All products are noted as "Up to date".
FYI, I noted that some other cases noted resolution with install of "Extension manager CC" (i.e. Createive Cloud)
I did not install this product.
Case closed for me. Hope this helps someone else.I will suggest to uninstall the Photoshop CC and completely clean Photoshop CC using Creative Cloud Cleaner tool.
you can download CC cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html
and cleaning reinsall phothshop CC using Creative cloud and then try to update the application.
Please let us know incase if you still face any issue -
Photoshop CC updates fail with DF045
My Photoshop CC updates fail with U44M1P7. The error log shows a number of files corrupted with DF045 suggesting that the application should be reinstalled. What is the correct method of doing this with CC without loosing settings or causing account problems?
I will suggest to uninstall the Photoshop CC and completely clean Photoshop CC using Creative Cloud Cleaner tool.
you can download CC cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html
and cleaning reinsall phothshop CC using Creative cloud and then try to update the application.
Please let us know incase if you still face any issue
Maybe you are looking for
-
Mail Message List Font in Preferences doesn't Work
I have just upgraded from Snow Leopard to Mountain Lion and am trying out the new features. In Mail - which I think captures all of my email even though I am on iCloud - I can't seem to get the font on the Message List (on the left where it lists all
-
Mandatory fields in the Conditio Records
Hi, The question is; When we maintain the condition record for pricing, we find that certain fields are mandatory and certain fields are not mandatory in a key combination.. Where and how is the mandatory setting set to the fields? Thanks in advance,
-
How to scan qr codes in Lumia 535 Moderator's note: The subject was edited as the post was moved to a more appropriate board.
-
Will new shuffle work on older iMac w/USB 1.0?
Thinking about getting my 9 year old a new suffle for xmas. His mac is an older G4 FP (lamp style) and only has USB 1.0. Will the new shuffle work on his iMac? Thanks, Alfredo
-
Coding in form created in screen painter
I have created a form in screen painter.How can I do coding in this form.I have added a save button in the form.How can I fire the click event on this button.The file created has extension srf and it can not be opened in asp.net.