Windows 98 Processor Usage
Hello,
I have found that any LabVIEW program (I am developing in LV 7.0 on a WIn200 machine) I write has a very bizarre effect when it is run on a PII Win98 Machine. I'll take you through the sequence of events.
I'll restart the computer and then display the processor usage monitor. I'll then run a LabVIEW developed program. The Processor usage is now around 8%. I'll close out of the program. Now my processor usage jumps up to about 65% and stays there forever more. If I run anything else, the processor usage accumulates. However, if I run another LV exe, the usage percent will drop down to the typical 8% or so.
I believe I am closing my application out just fine. I even tried the "Close LV" vi and it had no different effect.
Does
anyone have a possible reason for this or solution?
Glen D.
Hm, this is strange behavior indeed! Have you tested this out on any other Win98 machines to verify that it is a Win98-related issue?
Also, are you communicating to any hardware in your executable (i.e, using NI-DAQ or VISA). In particular, if you are using VISA, there is a 'SyncVisa' environment setting for LabVIEW executables that needs to be set in the .ini file. Refer to this KB for more information: KB 1O3650DM: My LabVIEW 5.0.1 Executable Uses 100% of the Processor When Using VISA.
If you are making any Traditional DAQ calls, then a CPU usage of 100% is expected. Refer to the following KB for more information: KB 2ZK7NQB9: NI-DAQmx CPU Usage at 100%
Hope this helps. Good luck!
Kileen C.
Similar Messages
-
Hello.
I'm running a tekkit classic (Minecraft) Server on a dedicated server I got from OVH, Im just wondering - Im currently using ClamAV for an antivirus, But I would like windows defender.
Im wondering if installing Desktop Experience on my dedi would increase processor usage or slow down the dedi even slightly.
System Specs:
RAM: 32GB DDR3 ECC 1600MHz
CPU: Intel Xeon E3-1245v2
HDD: 2x2TB SATA (Both used, specified as different drives)
OS: Windows Server 2008 R2 SP1
Theres only 1 indev tekkit server currently running on there, Im getting 0-5% processor usage. I may be setting up more modpack servers - but im wondering if installing desktop experience would increase the processor usage or slow the dedi down.
Thanks.
JosephHi Joseph,
This is the forum for Microsoft BizTalk Server, you've asked your question in the wrong forum.
I suggest posting your question in the Windows Server forum
http://social.msdn.microsoft.com/Forums/en-US/home#forum=winserver2008appcompatabilityandcertification&filter=alltypes&sort=lastpostdesc&content=Search
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu -
WLS 5.1 restriction of processor usage possible?
Hi,
I want to run the WLS 5.1 on a WIN NT4 server together with a SYbase ASE database
server.
The server machine has four processors and I want to define that WLS uses only
two
wheras ASE uses the other two.
We already know that this is possible with ASE.
What about WLS? Can we define (how?) that WLS should use only two processors.
I know that this is possible at
runtime with WIN NT Server Taskmanager. But I do not want that somebody needs
to adjust this
every time a WLS is restartet.
Or is this totally unnecessary, since WLS takes overall processor usage into account?
Thanks for any help!
FlemingWLS doesn't count CPUs, just IP addresses. You should check your system
doc's to see if there's a way in NT to restrict execution to a set of
processors at start time. It's possible in Solaris. This may just be a
limitation of NT.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"FF" <[email protected]> wrote in message news:3b134c9e$[email protected]..
>
Hi,
I want to run the WLS 5.1 on a WIN NT4 server together with a SYbase ASEdatabase
server.
The server machine has four processors and I want to define that WLS usesonly
two
wheras ASE uses the other two.
We already know that this is possible with ASE.
What about WLS? Can we define (how?) that WLS should use only twoprocessors.
I know that this is possible at
runtime with WIN NT Server Taskmanager. But I do not want that somebodyneeds
to adjust this
every time a WLS is restartet.
Or is this totally unnecessary, since WLS takes overall processor usageinto account?
>
Thanks for any help!
Fleming -
ITunes + Safari = Over 50% of Processor Usage
When running nothing more than iTunes and Safari, my processor usage varies from 50%-80%.
I wasn't aware of these apps being such resource hogs. Would a downgrade to Tiger help?
PowerMac G4 Sawtooth
2 GB RAM
1.7 GHz Sonnet Processor
Radeon 9800 128 MB video card
128 GB hard drive
Mac OS X 10.5.4 LeopardDo you have a large Play List on iTunes? Are you browsing a (or many) Flash sites at the moment?
I have a 20 GB Play List, and with iTunes and Safari open, the CPU tops at, say, 15% for each max (monitored via Activity Monitor). -
please, does anybody know how i can acquire the processor usage?
Here are some of the better articles that I've found on the subject. I haven't implemented it yet but I will soon.
http://www.javaworld.com/javaworld/javaqa/2002-11/01-qa-1108-cpu.html
http://www.javaworld.com/javaworld/javatips/jw-javatip92.html
John -
My imac on OS 10.5.8 is showing near 100% processor usage most of the time. It appeasrs that process SystemUIServer is the culprit using 70% or more of processor time. What does anyone think is causing this ?
What is the purpose of the UIServer module ?
Is there a good place to learn about the OS modules ?Useful information from BDAqua in this thread:
https://discussions.apple.com/message/22676167#22676167 -
Window Memory usage even after closing windows
I've included links to a test app that does nothing but
launch a window, play a sound, close window / repeat.
When application launches it uses about 20mb of memory. When
you click on the only button, it will launch a secondary window
that will simply play a wav file. (I set the volume low but you may
want to mute it :D)
After launching and closing the window several times the
memory usage goes up considerably and *never* falls back a
significant %. (I got it to about 100MB before I decided to quit
trying to increase the memory usage. Right now it's been running
w/o any user interaction since opening about 10 windows and it's
fairly stable at around 61MB (although that appears to be
increasing w/o user interaction).
Does anyone know of any methods I can use to ensure that the
memory consumed by secondary windows does not just persist forever
even after closing the window? Is there something I'm doing wrong
here?
Example Code:
http://www.vf-server.com/air/memorytest.air
(AIR)
http://www.vf-server.com/air/memorytest.zip
(source ZIP)
Note: When I *minimize* the window it looks like garbage
collection is forced and app drops back to 11MB (on restore back to
19mb).
Edit: note in your task manager, application appears as
JBTest.exeYou can call System.gc() to force the garbage collector to
run.
Try removing the event listeners when they aren't needed
anymore. I think it is more difficult for the gc to cleanup objects
when there are host objects (like Sound) refering to JavaScript
objects and JavaScript objects refering to host objects, so you
need to be especially careful about those. It SHOULD clean them up
eventually, but it may take longer for it to figure out that those
objects are no longer in use.
You might also clear the secondaryWindow reference in the
parent document when the window closes. That reference might retard
garbage collection, too. -
Code View Scroll Bar Jumps + High Processor usage
In Code View, if you click at the bottom of the page -if the vertical scroll bar is present- the scroll bar jumps one or two lines up.
I know about another bug i.e Dw uses 15 to 30% of the processor at all times, I hope it'll get fixed soon or I'll have to find an alternative.
Lemme know if you know of any solutions.Windows 8 RP Build 8400 -it happened on Windows 7 as well.
Dreamweaver Version 12.0.1 Build 5842 -I guess it's correct, I installed an update in the hopes of having this problem fixed but no luck yet. -
Premiere Elements 8 - Low Processor Usage
Hello,
I am running Premiere Elements 8. I have put together a video of HD footage, and am "burning" a DVD folder to my HDD. During the "Encoding Media" process, it is only using MAX 50% of my processor. I have a Core2Quad processor @ 2.33GHz with 4GB of RAM. I am running Windows 7 Home Premium 64-bit. I have a 640GB system drive, and a 1TB drive(on a PCI SATA card, that seems to run quite fast) that I use for my media. I would really appreciate it using all of my CPU, as it takes a whole day to render 1 1/2 hours of HD video. Is there any reason why this would be? It seems to do it either with or without any other programs running.
Any answers would be appreciated.
Thanks,
Austin
Screenshots of my Task Manager during HD video "Encoding Media" process:When you launch PrE, and look at the Splash Screen, does it recognize the multi-core processor?
Also, much of Transcoding is I/O intensive, as files are written to, and read from the HDD's, so the processor could be waiting for that operation to take place.
Unfortunately, I have never seen a benchmarking program for PrE, as there is for PrPro, where one can test their entire system, and find where the exact bottlenecks are. That would be great, if only...
Good luck, and maybe others will have some tips, insight or maybe cures for the Transcode times.
Hunt -
PSE 8 ... Email Sending & Processor Usage
Hello again
I had to start a new thread ... the other one was answered, thanks.
All transferred successfully. I made a mistake the first time by selecting Restore original folder structure and this dumped all the Adobe Calalogue information in my Pictures folder!
Maybe you can also assist with the following:
1. It seems that to send an email direct from PSE is not possible using Windows Live Mail? ( I used Windows Mail before on my old pc)
2. When PSE is not being eg Edited, my processor is running at a level higher than I would have thought necessary. I have unchecked all Auto Analyser Options and also Recognise People and it is not Reconnecting Missing Files. What else can I check?
Many thanks
RonLooks like we are up the creek again without the paddle.
Hello Adobe ... any chance of a fix please. I use thisPSE8 feature a lot and also the Photomail feature ... both were excellent on Windows Mail.
Help please, thanks. -
Module processor usage in File ADapter
Hi all,
I have a scenario Idoc->Xi->File to be in Xi 3.0.
There is already an XI 2.0 system up and running wherin they have used dispatcher classes for the File Adapter Configuration.They have used the Transform Class "com.sap.aii.messaging.adapter.XSLTConversion" and have added the particular XSLT mapping Program in "namespace1.XSLTService.XSLTConversion.XSLTFileName=
convert.xsl".
When I want to configure these in XI 3.0 as a Receiver File Adapter, documentation says that we need to specify these in Module Processor as a sevice. For this the precursor is that we need to deploy the Java Classes in SDM.
But my question is whether we have to include the XSLT coding too in the Archive and Deply it in the SDM? Is it not that its required only for the Java Classes to be Deployed using SDM or else the XSLT Codings too in a JAR File?Hi Stefan,
Thanks a lot for your reply.
I already tried this way by storing the file in the File system of the server.
But for example,the XSLT file is this path of the Server,
F:\usr\sap\D49\SYS\global\tech_adapter\xslt\DR11_adapter_exit.xsl
Then, what exactly should be the path specification in the XSLT Sevice filename....Now its exactly as I have mentioned above and the file is stored physically over there....
The error log was like this,
2005-02-16 11:54:37 Success output 1108572877484 The message was successfully received by the messaging system. Profile: XI URL: http://cmis147:50000/MessagingSystem/receive/AFW/XI
2005-02-16 11:54:37 Success output 1108572877484 Using connection AFW. Trying to put the message into the receive queue.
2005-02-16 11:54:37 Success SAPEngine_Application_Thread[impl:3]_0 1108572877500 The message was successfully retrieved from the receive queue.
2005-02-16 11:54:39 Success SAPEngine_Application_Thread[impl:3]_0 1108572879093 The message status set to DLNG.
2005-02-16 11:54:39 Success SAPEngine_Application_Thread[impl:3]_0 1108572879109 Delivering to channel: FILE_DR11_Outbound
2005-02-16 11:54:39 Error SAPEngine_Application_Thread[impl:3]_0 1108572879125 Exception caught by adapter framework: failed to configure the transformation object
2005-02-16 11:54:39 Error SAPEngine_Application_Thread[impl:3]_0 1108572879125 Delivery of the message to the application using connection AFW failed, due to: failed to configure the transformation object.
2005-02-16 11:54:39 Success SAPEngine_Application_Thread[impl:3]_0 1108572879125 The asynchronous message was successfully scheduled to be delivered at Wed Feb 16 11:59:39 EST 2005.
2005-02-16 11:54:39 Success SAPEngine_Application_Thread[impl:3]_0 1108572879140 The message status set to WAIT.
But when I see the monitoring for the AdapterFramework it says its ok.
So I thought the path is probably invalid.
Your opinions please...
Thanks in Advance,
Romit. -
Receiving Transaction Processor Usage
How to create DELIVER transaction for a receipt in RECEIVE status manually? What is the usage of rcv_shipment_interface and rcv_transactions_interface tables? Are these similar to the ap and gl interface tables? Is it that the records get deleted form these tables after being moved to the main Receiving tables?
Kindly suggest.
Thanks and Regards
Geeta Rawat
Edited by: 906805 on Jan 31, 2012 8:47 AMCan anyone please update?
Regards
Geeta Rawat -
High processor usage using xdm-archlinux
Both xmessage and xclock are running the processor more than needed and continue running after logging in.
/var/log/xdm.log keeps running var out of disk space with continuous error messages:
Warning: select failed; error code 5For what I'm using, it is behaving. I'm not using urxvt.
This may have something to do with the urxvt: https://bbs.archlinux.org/viewtopic.php?id=50963
Last edited by nomorewindows (2012-03-17 13:47:31) -
We have 2 machines that we use for quicktime broadcaster for webcasting/recording live events. While one is fairly powerful and never uses a ton of CPU power, the other is a older powerbook which jumps up to the 90%'s when running.
On each machine, we have a script in root's crontab that runs every minute, and it seems to take up ~5% or so when it runs. It's important that the script runs every minute but not important how long it takes.. right now, its usually just a second or two. However when the powerbook in webcasting and the script runs, sometimes there's a little hiccup in the video that's recording, im guessing cause the processor reaches 100%.
Is there any possible way to reduce the importance/load of cron to fix this?
P.S. the cron command that runs is a "cat file > file2" commandcron itself isn't the problem, it's the command that cron's running that's the problem. You could change the nice value of the command so that it becomes "nicer" and let's other processes go ahead of it in the run queue. Check out the man pages on nice and renice:
man -k nice
Roger -
Increasing Processor Usage when Encoding Video?
When I create videos in iDVD and it says that I am Encoding video in the progress bar, my processors are only about half used. I have 4 processors and 6 gigs of ram! Is there anything that I can do to have the encoding use the max my machine has? Could it be a hard drive issue? I don't think so though.
KevinHi Kevin;
I don't think that moving the applications, iDVD and iPhoto, will do you any good at all. I would suggest if you have other disks available to try placing the source files of the video on one drive and the destination files for the encoding on another to see it that has any effect. It would probably be the quickest and easiest way to see if we are on the right track here.
Allan
Maybe you are looking for
-
Windows 8.1 update continues updating 6 hour after
This morning Windows ask me to reboot for install some updates, I say yes and now six hours after it continues updating at the same step 'installing update 6 of 12' I don't know what to do. Can I stop the updating process? I tried to switch off my co
-
Reference: Converting Database Queries to XML Reference Link: Labs Example I have converted various database queries (i.e.standard queries and JOINED Tables) to XML however as I filter the DB Query to pass/receive a URL Parameter from (i.e projectsID
-
Jbo:DataScroller - how to ensure 'First' and 'Last' action links appear
I'm working in JDeveloper 10.1.3.5.0. I'd like to know if there's a way to ensure that the action links 'First' and 'Last' will appear, in addition to the 'Next' and 'Previous' ones (that is, assuming we're not already at the first or last range posi
-
Has anyone got the GSM Samsung SGH-T609 to work with iSync, either through the USB cable or Bluetooth? It works fine through Bluetooth File Exchange, and iSync sees the phone, but says "iSync cannot connect to this device". Also, Address Book will le
-
Hello all, I have one query. In ECC 6.0 for sandbox there is A088 dotted relationship & the same is not in the development client. Any idea as to why?? I assume that incase of upgradation from 4.7 to 6.0 A088 exsist where as if ECC 6 is installed A08