Windows accelorator driver stopped working

Every now and again I have a message which comes up saying Windows accelorator driver stopped working for Windows XP and has recovered. I have Windows 7 home premium so why would this message keep appearing every so often.

Is there any text before "windows acc...." in the error message? From the information supplied I would guess you are running W7 32bit and you've either upgraded from XP or you have loaded an XP grahics driver - I've only seen that sort of message from video drivers. I would check that either an updated Toshiba driver or a "WHQL" certified laptop driver is available from the graphics chipset's web site.

Similar Messages

When using lighting effects in cc programme freezes and then window comes up sayind amd driver stopped working but is now ok. Tried to open lighting effects in cs6 and default spotlight is there but then it freezes. No mention of driver problems. Any s6

Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.

That is very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
Tested video cards for Photoshop CC and CC 2014
Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.

Windows 7 - browser stops working still connected

As the title says Windows 7, browser stops working after some time passes.
This effects IE and Chrome. I can still ping www.google.com or it's IP address. (all other computers on the network are fine)
I've used both the wired and wireless connection without the same results.
I reboot and it works, I walk away from the work station and then boom no browsing.
I've turned off the firewall, released and renewed the IP, netsh winsock reset none off this worked.
I've gone into internet options and ensure that no "proxy' boxes are checked.
I've uninstalled the network card drives and restarted the machine.
I've ran Malwarebytes (no infections), ccleaner to check for registry problems. Nothing there.
I've disabled the power saving options and uncheck "let windows turn this device off"
I've also ran Norton and Mcgafee uninstallers just be sure there aren't any residue from those installed.
No bittorrent clients
So I'm online but can't browse on this one computer? what's the deal please Help!

ctrl+alt+del to display the tasksmanager...Processes tab,
any google processes running? googletoolbarupdater.exe (x86 or x64)?
any other suspicious/unknown processes running? see why not to use ccleaner on win7 machines http://forums.steampowered.com/forums/archive/index.php/t-971768.html spybot S&D installed? turn off 'Teatimer' Tools>Internet Options>Security tab, click "Reset all
zones to default".... there are security zone settings for meta refresh. running IE in noAddons mode is the first test (close all open IE windows first, if using IE8 reboot your computer to clear any hidden IE crash recovery processes or use the taskmanager
to kill any orphaned IE processes) Start>Control Panel>Sharing and Networking>run the diagnose connection problems tool to diagnose network connection issues. IE9....f12 to display the developer tool>Networking tab, click "Start Capturing"..... to trace network
requests and responses. IE8 and earlier.... download fiddler from http://fiddlertool.com HTH
Rob^_^
also Tools>ActiveX filtering (enable/disable) google.com injects an ActiveX 'object' (googletoolbar.dll) that tracks your search and surfing history, in their search and results pages.

"Windows Explorer Has Stopped Working" Error Message Loop upon Startup of WIndows 7 Ultimate 64-bit

Ok I have a HP Touchsmart 6000 running Windows 7 Ultimate 64 bit OS. It is my 74 year old mothers computer and about 3 months ago it started acting up. First thing that happened was the internal DVD Burner started working intermitently, recognizing
her QuickBooks backup DVD files occasionally. I got her a new internal DVD burner and it worked for a while. during that time on Startup Help and Support would all of a sudden popup right away. Then recently Adobe Acrobat would
launch a PDF file about Flash and keep opening multiple instances of it. Now her new DVD doesnt work again and on startup at the windows desktop she gets an error "Windows Explorer has Stopped Working". No matter what I click the error
keeps looping. No program has been opened that causes it to crash because the error happens immediately and keeps repeating. I have tried to boot to Safe Mode, Safe Mode with Networking and have tried System Restore to no avail.
I have ran Malwarebytes Antivirus, Malwarebytes AntiExploit, AntiRootkit as well as Combofix. I have run the AntiMalware software from Microsoft and have updated all the drivers for the HP system. To no succcess.
At one point the system did load and an error came up JAN2OSD failed to start due to missing ACPI or something like that. For that brief moment Explorer stopped crashing. When I finished updating driverss though the error came back.
Please Help as she is about to cry and no one wants to make a 74 year old woman cry.:)
Thanks,
Jeff

Hi,
According to the steps you have performed, we have followed the steps mentioned in this KB article?
Error: Windows Explorer has stopped working
Hvae you tried the repair install of Windows 7? Follow the steps here:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Besides, if issue insists, please follow the steps below to generate a dump file:
1. Create a new folder (named New folder)under C: drive.
2. Please save the below as a .reg file, and then import it to registry, reference here:
===
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,4e,00,65,00,77,00,20,00,66,00,6f,00,6c,\
00,64,00,65,00,72,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
===
3. After that , if Windows Explorer stops working again, please check the
C:\New folder for dump files and then upload them.
Meanwhile, please also make a contact with the manufacturer to see if we could get any further help from there.
Best regards
Michael Shao
TechNet Community Support

Intel wired ethernet driver stops working

We have this issue with several T400 and T500 series ThinkPads that the Intel ethernet driver stops working after a while. All this started to happen maybe a month ago. We have both 32- and 64-bit Windows 7 OSs.
Wired ethernet works ok first, but after a few hours or a day or two this yellow exclamation mark appears on the network icon and it says limited or no connectivity. Wired network stops working and there is nothing we can do to fix this other than reboot the computer. It doesn't even shut down properly, just says "Shutting down" forever and blinks the HDD led maybe once a second. So we have to force it and after booting everything is ok until the next time this happens.
When the network stops working, nothing can be done with the driver because everything just hangs. You cannot disable the connection or uninstall the adapter from Device Manager or anything. Unplugging the ethernet cable does not help either. There is nothing about this problem in the Event log other than about the symptoms of not having a network connection.
What could be the source of this problem? Do you have any ideas about how to diagnose this problem further? We have the newest driver and I have also tried the newest driver from Intel.

Go to Local Area Connection (Wired Intel adapter), Properties and the Configure button, in the Power Management Tab UNCHECK "Allow the Computer to turn off this device to save power".
Window7 does NOT always resolve IP and DHCP when it come out of sleep etc. All attempt to release/renew are in vain. I have seen this on various systems for some time. Occassionally a router reboot fixes it but most of the time is the PC. Frustrating but for Wired use this should always be disabled if you're using it a lot. Power savings is not in your best interest.
Let me know if that does it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

ITunes8 -- all optical drives stopped working

After installing iTunes 8, all my optical drives stopped working. Windows simply didn't recognize them. Device manager said they were missing. However the BIOS found them. Uninstalling iTunes8 fixed it.
However, like everyone else here, now I can't return to a previous version of iTunes because it refuses to recognize my library file (a .itl file).
Argg
What can I do, to either use an older version of iTunes, or fix this problem?

I tried the suggested fix on Apple's site (http://support.apple.com/kb/TS2372?viewlocale=en_US) but both my DVD drives remained invisible.
Then I tried the one at MS suggested by Adrian Kingsley-Hughes on his ZDNet blog (http://blogs.zdnet.com/hardware/?p=2600):
http://support.microsoft.com/kb/314060
Hooray! It worked! Not only have my drives reappeared, but I am burning a DVD right now using InfraRecorder.
Unfortunately, now I get a nasty message about missing registry data whenever I start iTunes, but I assume Apple will fix this problem in some future release. I'll have to live with it until then.
I spent hours on this today and almost ordered some new SATA drives, thinking the IDE controller on my mobo must have gone bad. I really appreciate the existence of Adrian's blog and other third party resources!
And I am very annoyed at Apple right now. Releasing software that breaks peoples' computers in a major way is not acceptable, IMHO. Leaving the bad software out there and posting fixes that don't work is even worse.
BTW, I am running XP Pro SP2. I have Logitech hardware and software installed, as well as a number of other USB devices (Treo, Canon printer and scanner, iPod) so (according to Adrian and other sources) I guess I was a likely victim.
Note that, having been burned before by new major releases of iTunes, I was cautious: I held off on installing iTunes 8 until the second release, hoping they'd have fixed any really bad bugs that showed up in the first release by then.
Silly me.

Radeon display driver stopped working

Hi
I am running Win 8.1 x64 (up-to-date) on HP Pavillion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012. What the hell!
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates.
Can any one please advise me?
PS. I am fed up with HP and ATM, I wont go for HP again and never recommend for someone elese.
This question was solved.
View Solution.

Hi JSHLMS,
I see that you have some questions regarding the your switchable graphics. You will not want to use the drivers available from Intel and AMD because with switchable graphics it is the manufacturer of the notebook that configures the drivers. Intel and AMD provide a basic driver and HP configures for their notebooks. You can download the latest AMD software package which includes CCC here. I did some research and found Windows 8.1 versions of your drivers but as your model doesn't have specific drivers I can't guarantee that they will work. If these drivers don't work then I recommend downgrading back to Windows 8.
Intel High Definition Graphics Driver
AMD High Definition Graphics Driver
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Windows Powershell has stopped working

Hi,
I am getting an error during Windows logon, which says "Windows Powershell has stopped working". When I looked at the event logs, I found the below event in App logs. Can you pls help what is going wrong here?
Log Name:      Application
Source:        Application Error
Date:          2/18/2014 7:55:16 PM
Event ID:      1000
Task Category: Application Crashing Events
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MININT-BNG69NS
Description:
Faulting application name: powershell.exe, version: 6.3.9600.16406, time stamp: 0x5244e9dc
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0xb3c
Faulting application start time: 0x01cf2cb52a860b9f
Faulting application path: C:\WINDOWS\System32\WindowsPowerShell\v1.0\powershell.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: 7c4832cf-98a8-11e3-b82f-a088b40d3a94
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-18T14:25:16.000000000Z" />
    <EventRecordID>2449</EventRecordID>
    <Channel>Application</Channel>
    <Computer>MININT-BNG69NS</Computer>
    <Security />
</System>
<EventData>
    <Data>powershell.exe</Data>
    <Data>6.3.9600.16406</Data>
    <Data>5244e9dc</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.1.7601.18229</Data>
    <Data>51fb1677</Data>
    <Data>e0434352</Data>
    <Data>000000000000940d</Data>
    <Data>b3c</Data>
    <Data>01cf2cb52a860b9f</Data>
    <Data>C:\WINDOWS\System32\WindowsPowerShell\v1.0\powershell.exe</Data>
    <Data>C:\WINDOWS\system32\KERNELBASE.dll</Data>
    <Data>7c4832cf-98a8-11e3-b82f-a088b40d3a94</Data>
</EventData>
</Event>
Arun

Hello Mike,
I have a script that is a part of HKCU Runonce, which is used to map D drive to indexing. Below is the script.
Write-Host Load the dll
Add-Type -path "C:\Program Files\Microsoft.Search.Interop.dll"
Write-Host Create an instance of CSearchManagerClass
$sm = New-Object Microsoft.Search.Interop.CSearchManagerClass
Write-Host Next we connect to the SystemIndex catalog
$catalog = $sm.GetCatalog("SystemIndex")
Write-Host Get the interface to the scope rule manager
$crawlman = $catalog.GetCrawlScopeManager()
$crawlman.AddUserScopeRule("file:///D:\*",$true,$false,$null)
$crawlman.SaveAll()
Write-Host Script completed
Arun

Driver stopped working (pavilion dv5 1388)

My laptop froze and a message popped up saying my driver stopped working. Then another message popped up saying my driver isn't working at all. I can't play any games, because of this they do not work properly; they just stop working. Does anyone have any clue on what I should do to get the driver working again? Is there a driver that I need to download?

Hi neWeRA,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook froze and you received a message that a driver has stopped working and you are unable to play games.
Have you tried running The HP Support Assistant to look for HP updates and help resolve issues.
Here is a link to HP Pavilion dv5-1388us Entertainment Notebook PC Drivers.
Have you checked for viruses?
I would also run a hardware test to rule out a malfunction. HP Notebook PCs - System Diagnostics (F2)
If everything tests fine and you are unable to install the required driver, you can do a system restore back to a knonw good date. Using Microsoft System Restore (Windows 7).
If that is not an option I suggest you do a recovery back to factory. Performing an HP System Recovery (Windows 7)
During the recovery process you will receive a prompt to backup you personal data. If you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Windows 7 Error Message: Microsoft Visual C++ Runtime Library Runtime Error.... Followed by Windows Explorer Has Stopped Working

I am running a system that is not quite 6 months old, which is loaded with Windows 7 Professional, 64 bit.
The error message that I get is as follows: Microsoft Visual C++ Runtime Library. Runtime error! Program C:\windows\Explorer.exe. This application has requested the runtime to terminate it in an unusual way. Please contact the
application's support team for more information.
Once I respond to that message, I get a message that says "Windows Explorer has stopped working. Then I get "Windows Explorer is re-starting"
I don't know if the next event is related - today, immediately after getting the message above, I got a pop-up that said "An update to Adobe Flash Player is available" - and I am given the option of installing it or not. Today, I did not install
the update - although I recall having accepted this update in the past (again, I don't know if the two situations always occur together).
Is there some help I can be provided to correct this problem? I have looked at several related topics in this database, but have not found anything that seems to directly relate to my question.
Thanks! Mark

Hi,
Did you try to reinstall the Microsoft Visual C++ 2008 Redistributable
Package (x86) to check this issue?
What about to boot the computer in safe mode and Clean Boot to test this issue?
Regards,
Vincent Wang
TechNet Community Support

CD drive stopped working on my Satellite L

Hi
MY CD drive stopped working, but then it recognised a disc which I had inserted, but then stopped working again.
I have deleted upper and low filters from device manager.
I have also downloaded the dvd ram driver from toshiba and my cd drive then worked, but after I closed down the computer, again it would not recognise discs in the drive.
I again downloaded the driver and it then recognised the disc I inserted into the drive.
However, now my computer will not recognise the drive even when I again download the driver.
Does anyone know why it would work intermittently or have any ideas that might help.
Thanks.

Which satellite L do you have?
Which operating system do you use?
Do you use original Toshiba recovery image?
Is ODD recognized properly in device manager?
Which disc do you use?
Do you have this problem using only this one disc?
Sorry buddy but your description is so general and there is no one single relevant info that can help for better understanding.
What you can expect are just general answers like:
-reinstall ODD
-test with different discs
-defect ODD

My macbook hard drive stopped working and I loaded another hard drive and can access time capsule but it doesn't show any of my old files and I don't understand why

My 7 year old macbook hard drive stopped working and I put in another hard drive but when I went to restore my information from airport time capsule it only shows today and nothing older. Help?

Did you do a TM backup after you installed the disk? It may write over the previous backup.. but it should actually start a new one.
Read the info about using migration.. see http://pondini.org/TM/Home.html
Or the Mac is probably looking at the backup as from a different computer.
See the details of how to use TM to restore to a different Mac.
Q17 here. http://pondini.org/TM/FAQ.html
I would read through 14-17 carefully.
You should be able to do a full recovery of the TM backup to a USB drive plugged into the computer.

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Macbook pro optical drive stopped working after installation of mavericks

macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

Windows accelorator driver stopped working

Similar Messages

Maybe you are looking for