Windows AD Domain Name Change

Hello, Netpros.
I have a customer who is changing their AD domain name. They are running Unity 5.0(1), Unified Messaging, and off-box Exchange 2003 as the message store. From looking at the docs, I am assuming that this will be considered changing both the DC and the message store. I think I'll have to do a complete rebuild and restore using DiRT (http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge060.html). After that, I'm assuming that I'll need to do a message store change (http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge050.html).
However, we are not really changing to a different DC or an Exchange, it will be the same one just renamed, but it appears to me that we have to consider it as all new. Is this correct? If so, are there any steps I'm missing? What do I have to do to subscriber properties, if anything? Do I need to decommission the server from the domain before removing? Is there any concern as to the order of operations? E.G. Do I need to decommission, kill subscriber properties, have them change the domain name, then rebuild and re-add?
Is there anyway to not have to go this route, say using DNS to translate the old domain? We'll be migrating to Connection in several months, so I'd like to avoid a rebuild now if possible, as both time and budget are short.
Thanks for your thoughts on this,
Joshua

This would be considered the same as moving Unity to another domain. So, it is a DiRT backup, rebuild, DiRT restore operation. Here is the applicable link from the configuration guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge080.html#wp1097725
I do not know of any way to get around this. Unfortunately, it would be much easier for you if you could have timed the migration to Unity Connection in conjunction with this change.
Hailey
Please rate helpful posts!

Similar Messages

Connection Errors to Remote Desktop from OSX after Domain name change

We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

App server domain name changed

Hi All,
Our App server domain name changed so we did following ways to take the changes to effect. When starting the Middle-tire gives error
Old name=koredm104715.in.company.com
New name=ias-instance id=koredm104715.apac.company.com
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd chgiphost.bat -mid
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cmd /c chgiphost.bat -mid
Oracle Home set to C:\Oracle\Product\OraMidTier10gR2
Starting Change Hostname/IP...
Enter fully qualified hostname (hostname.domainname) of destination
(koredm104715.APAC.company.com)>>koredm104715.APAC.company.com
Enter fully qualified hostname (hostname.domainname) of source
(koredm104715.in.company.com)>>koredm104715.APAC.company.com <----------- Issue is here as source should be koredm104715.IN.company.com
Enter valid IP Address of destination
(10.47.32.43)>>10.47.32.43
Enter valid IP Address of source
(10.47.32.43)>>10.47.32.43
Source and destination hostname/IP are identical.
Continue? (y/n) y
Change Hostname/IP completed successfully.
C:\Oracle\Product\OraMidTier10gR2\chgip\scripts>cd..
C:\Oracle\Product\OraMidTier10gR2\chgip>cd..
C:\Oracle\Product\OraMidTier10gR2>cd opmn\bin\
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
==============================================================================
opmn id=koredm104715:6200
    5 of 7 processes started.
ias-instance id=OMT_10gR2.koredm104715.in.company.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
Error
--> Process (pid=3152)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCache~1
ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=4924)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\Oracle\Product\OraMidTier10gR2\opmn\logs\WebCache~WebCacheAdmin~1
C:\Oracle\Product\OraMidTier10gR2\opmn\bin>Edited by: Lokanath Giri on १९ जनवरी, २०१२ १:५८ अपराह्न

Have you checked your web cache log files for errors? Also check the %ORACLE_HOME%\opmn\log directory as there are many log files which can be helpful resolving your issue.
Thanks,
EJ

Domain Name Change in CSS

We have a CSS doing HTTP load balancing. There is no SSL termination done on this device.
will the domain name change have any impact on the load balancer?
thanks
sathappan

If you see the domain name in your CSS config, then yes there will be an impact.
Otherwise, no.
By default we do not check the domain name.
Gilles.

Domain Name Change procedure

Can anyone tell me which are the changes to do in the alui portal when the domain name change ? Which are the files to modify ? Does any tool exist to automate the task ?
ex : portal.toto.com became portal.titi.corporate.com

I'm interested to any solutions too.
For instance, my solution was to find and change all configuration files with a command line like "find . -name "*.xml""...
But you have also to change configuration inside the portal, like all remote web services addresses
I think it's not so easy to change the domain name

Domain Name Change Disabling Keys

I'm told that our domain name change from hhp.umd.edu to
sph.umd.edu will disable the Contribute keys.
Is that correct and if so, how do I get new keys that are
usable with the new domain?
thanks for your assistance.
daniel

I have a related question. I have about 20 different
connections that I have set up manually. Now that our domain login
has changed the connections are no longer there. Where is that
information stored. I'd like to recover it.

Domain name change broke oms/agents/grid control

We merged with another company and the domain names changed for all servers last weekend. I fixed all servers (tnsnames, listner.ora and db_domain parameter), so sqlplus works and all processes work.
My question is: which parameters do I need to change in the agents and the oms for gridcontrol to work again. Where are those parameters? Is there any documentation I can follow?
Thanks.

Hi.
if the domain name from EM GC has changed you need to migrate the repository
and reinstall the oms.
*T
Oracle® Enterprise Manager
Grid Control Installation and Configuration Guide
10g Release 5 (10.2.0.5.0)
E10953-11
September 2009
Oracle® Enterprise Manager
Advanced Configuration
10g Release 5 (10.2.0.5)
E10954-03
Edited by: tbrinkmann on Feb 16, 2010 6:00 AM

Internet Email Domain Name Change

Mangagement wants our email domain name changed because of it's length. Another government agency handles hosting for us now and can't change it for us. I have paid for a new name using a company on the internet and now have to switch it over. I see, in console one, that I can create a second name in Tools -> Groupwise System Operations -> Internet addressing and then set one of them to preffered. Can I do this and then set the new name as preferred? I would like to allow email that is addressed to the old email domain name to flow to the users for 30 days. Looks like I will need to change the foriegn ID in the gwia and also the name in the internal groupwise domain properties. Is there anything else that needs to be done? Is this the best way to do this? Thanks

On 7/30/2012 3:36 PM, dgonnse wrote:
>
> Mangagement wants our email domain name changed because of it's length.
> Another government agency handles hosting for us now and can't change
> it for us. I have paid for a new name using a company on the internet
> and now have to switch it over. I see, in console one, that I can
> create a second name in Tools -> Groupwise System Operations -> Internet
> addressing and then set one of them to preffered. Can I do this and
> then set the new name as preferred? I would like to allow email that is
> addressed to the old email domain name to flow to the users for 30 days.
> Looks like I will need to change the foriegn ID in the gwia and also
> the name in the internal groupwise domain properties. Is there anything
> else that needs to be done? Is this the best way to do this? Thanks
>
>
assuming there's no po/user/domain overrides of IA settings, that should
work ok.

The window where Domain Name, Edit, Modify doesn't show up to access my Fatcow website on my new iMac in Firefox (the only browser Macs can use). Help!

Just got a new iMac. For the first few days, I was able to log in to, then access the window in Fatcow web host that allows me to make changes to my website. Now, the window that is supposed to say "Domain Name" and "Edit" and "Modify" is blank, so I cannot access my website to make changes. Firefox is the only browser available to Macs through Fatcow. In the two weeks before getting the iMac, I had the same problem on an Acer laptop. Hughesnet is our internet provider, since we live in the country. I have worked with several Fatcow techs, and they do not believe the problem is on their end. When I open Firefox, there is now also a message that says I'm missing plugins, yet when I follow the plugin link, no plugins are listed as missing. I have removed/reinstalled Firefox, to no avail. I have turned off the clear-cookies-automatically add-on, cleared the cache and history, etc., to no avail. I have printed out the HTML script for the Fatcow window from my Mac at work (from which I can access the window) and compared to the one at home. There doesn't appear to be any script missing, but I can't say for sure. I have read several articles, hoping for clues to fixing this problem. Now I need your technical expertise. HELP!

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Could domain name change after Unity migration?

Hello everyone,
I will upgrade Unity3.1(6) to Unity 4.0(5) (Voice Mail only).Here is the main steps:
1. backup current Unity data
2. install Windows2K server w/Exchange 2000,Unity3.1(6) from scratch.(not replacing server hardware,
Windows2k server and Exchange 2000 server are located in the same server)
3. recover Unity data on new installed windows2000 w/Exchange 2000 server
4. Upgrading Unity3.1(6) to Unity 4.0(5)
I got a few questions here.
1. Should Domain name keep the same? ( If I need to change Domain name, is it applicable?)
2. Should I run Active Directory connetcor for recovering Exchange5.5 data?
Hope to share experience with you. Thanks for your reply.
Background:
Unity 3.1(6), Exchange5.5 installed on Windows2000 server A,
Users in WindowsNT 4.0 PDC server B,
After migrating:
Remove WindowsNT 4.0 PDC server B,
windows server A will be Domain Controller w/Exchange2000, Unity 4.0(5)
Howard

Hello,
I don't understand why you are going to rebuild the server, if you just want to upgrade to Unity 4.0 (I am assuming that you currently have W2K); you just need to:
- Do a Dirt backup
- Upgrade to Exchange 2K
- Do a Dirt backup
- Install the CUSPA and CUICA
Just follow the instructions on this link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/rug/ex/ru_020.htm#wp1040363

OS X Server clients can't login after IP renumber and domain Name change

I can not seem to get the logins working again on my OS X server (10.9.4 w/ server 3.1.2 on a 1 yr old. MacMini) after I needed to renumber the IP and change the domain name. I destroyed the Open Directory server, recreated it and created one test account. If I log in to the client with a local account I can connect to the server (Go>Connect To Server) from the client using my newly created account, but when I try to login to the server using the same network account login I get the "shaking head" response immediately. I have rebound the server to this client and it says that network accounts are available, but seem to be at a loss to understand why it won't let me login...
The only error message I see in any of the logs is the following:
(AFP Error Log:) Sep 15 20:21:47 isis.mydomain.com AppleFileServer[3032] <Info>: major error <1>: No credentials were supplied, or the credentials were unavailable or inaccessible.
I'm not sure what credentials it is referring to. I created a self signed certificate that I am using with OD, could that be the one?

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Disable any internal firewalls in use, including third-party "security" software.
10. If you've created any replica servers, delete them.
11. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

Domain name changing

Hi,
I have a windows 2000 server with 9ias release 2 infrastruture and portal (mid tier)
installed. this machine is running as a primary domain controller in a separate
domain of the one i have for our exchange server. we are having some troubles
to estabilish a consistent trust relationshiop between the 2 domains.
Our technicans say the best way to solve some network problems is to promote
that machine to a secondary domain controller in the domain of our exchange
server and to have just one domain.
My question is what i have to do with my installation of 9ias r2 with portal
after that change. keep in mind that the domain is going to change.
I have to evaluate the degree of risk that one change like this is going to
have in my enterprise portal.
thx

Hi
I read somewhere. possibly the release notes that changing IP address or domain names is not supported in R2. it was in R1 and it will be in the future.

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

Question about RAC 10g on server running AIX and domain name changes

We have several 10g clusters running on IBM p-Series AIX servers, and our company is changing the domain name for our network. I am concerned that if we do not change the domain names in the TNSNAMES.ora file and also the /etc/hosts file on each server, the cluster will no longer function. We are using CRS (version 10.2.0.3) and ASM within each cluster.
Does anyone know where I can find information about changing the domain name that was set up as part of the CRS and database installs for RAC? Does anyone have experience doing this, and would be willing to share a few insights? Thanks in advance for any advice you can give!

You may be able to use the VIPCA utility for RAC to change or modify the public and private settings for your domain names on AIX. Also, the Oracle 10g DBCA "Database Configuration Assistant" should be of use to change your settings for your RAC environment.
Also, see here for a good IBM Redbook that covers Oracle 10g RAC on AIX platforms:
http://www.redbooks.ibm.com/redbooks/pdfs/sg247541.pdf
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/

Domain name changes when sent to external mail ids

Here's the problem...
We are sending PO's as pdf's to the vendor..
If the vendor domain name is vendor.com and mine is company.com.
SAP sends a mail
To [email protected] ;[email protected]
CC : [email protected]
When the mail reaches the vendor it shows as
To [email protected] ;[email protected]
CC : [email protected]
the domain name of person2 gets changed though person2 does get the mail...and when the purchase manager at the company looks at it in his inbox - it looks as it should be.
I checked SOST it shows the correct mail id.This is not specific to a particular domain occurs with all domains .
Has anyone encountered such a problem before.
Regards
Rani

Hello Navjot,
if you have some basis background you can check TCode SCOT there you can see if the mail connect for external mails is configured correctly. There shoud be at least a node for SMTP communication. If there is such node check that sending s not restricted to certain adresses. Furthermore you could check over the menu if the default domain is set properly.
Kind Regards
Roman

Windows AD Domain Name Change

Similar Messages

Maybe you are looking for