Windows always shows lock screen when idle, ignores setting

On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
screen turns off.
How can I get my computer to stop locking when it is idle?

Hi,
What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

It's not showing the play or next song buttons on locks screen when the musics are played

it's not showing the play or next song buttons on locks screen when the musics are played

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Windows 8.1 lock screen

Hi there,
I would like to ask about lock screen. Normally, when I turn the screen off using function key, it will lock the screen and when I press any key, windows will ask for authentication. But after receive some updates, I cannot not do this anymore. The screen
will turn on and go directly into the screen without asking any passwords so I would like to ask how to lock the screen automatically when I turn the screen off.
Thank you for your help

Hi,
In alternative way, we can try following steps:
Windows key + L (lock screen)
Set the lock screen timeout to turn off display:
How to Change Lock Screen Display Off Timeout Period in Windows 8 and 8.1
http://www.eightforums.com/tutorials/8268-lock-screen-timeout-period-change-windows-8-a.html
Kate Li
TechNet Community Support

My macbook pro shows blank screen when I started..help me..

My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

I receive email from a yahoo account and a gmail account. thunderbird always shows a notice when yahoo mail arrives but never for gmail

I receive email from a yahoo account and a gmail account. thunderbird always shows a notice when yahoo mail arrives but never for gmail and the settings are the same help! TIA

well turn it off and see if that makes a change. After all IDLE is a server technology. If Google supports it and Yahoo does not then configuring Thunderbird the same means nothing. (I have no idea if Yahoo support it or not)

IPod shows locked even when not

iPod is showing "locked" even when the toggle switch is not on lock. I have restored it via iTunes, and it still shows locked, so can not use at all. Can't find any articles regarding how to turn this off. Any help appreciated. I've toggled it back & forth several times to try and unlock it with no luck. Thanks.

So you are saying that the time is in parentheses? I want to make sure I understand what you are having trouble with. When I am running on battery, the time left is in parentheses (3:15). When I am charging, the number (1:13) is in parentheses, as well as the word Charged (Charged). If the time option is selected in the preferences, there will always be parentheses. This is my experience.
If you can, post a picture of what you are speaking of. That may help.

Retina Mac shows gray screen when waking up: what to do besides loosing work?

(see also http://apple.stackexchange.com/questions/96188/retina-mac-shows-gray-screen-when -waking-up )
This is the first time that my Retina MacBook Pro wakes up from sleep with a gray screen. After about 10-20 seconds, the MacBook falls asleep again.
Some points that might be relevant:
The only difference between power adapter and no power adapter is that with power adapter it does not go to sleep again.
The battery is almost full (I closed the lid last night when it was about 90%)
An external monitor was not attached when sleeping it, so I don't think How to fix a Macbook that does not always draw its internal screen after waking from sleep and having unplugged external display while asleep? applies.
I've run gfxCardStatus, almost always in "force integrated mode" (to conserve battery). And normally it wakes up correctly.
I run VMware Fusion 4.
All software is up-to-date and fully patched.
I tried to plugin an HDMI monitor and switch displays with Command-Fn-F1 and Command-Fn-F2, but that did not help (it would not switch displays).Before trying to:
reboot (by force a power off),
reset SMC
and/or reset PRAM/NVRAM
What options do I have that do not loose my work?
sleep-wake retina-macbook-pro battery

Those keys do not reinstall OS X. To do that:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
COMMAND-OPTION-P-R keys resets the PRAM. OS X keyboard shortcuts.

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

HT204291 Showing checked screen when mirroring hd itunes movies from macbook to tv?

Showing checked screen when mirroring hd itunes movies from macbook to tv?

it's dvd's DRM encryption kicking in
it's by design if you use remote desktop from another computer to the computer
the same thing would happen
people say that the free player vlc don't have the issue
if that is the case then vlc are breaking the law as stripping a dvd's movie stream of encryption is not really legal

Is there a way to keep the screen from lighting up every time an email comes in, but still be able to see the email on the lock screen when you press the home button?

Is there a way to keep the screen from lighting up everytime an email comes in, but still be able to see the email on the lock screen when you press the home button? This is killing my battery, but also is kinda the whole point of the notification center in my mind.

This is something I've been wondering. I am a bit like you, I like being able to have a glance at emails or Facebook updates without having to log in, and I think it would be great to be able to turn off the notification switching the screen on, especially for emails as I do get a lot, and Facebook, but I somehow doubt it is possible.
I am currently monitoring how much this eats up my battery charge. On a normal day, after an overnight charge, I would probably still have 30%-40% left when I leave work in the evening. Today, I was down to 48% by lunchtime, where I've usually got a good 60-70% left... Might have to turn email notifications off on lock screen until it's possible to have them appearing in the list without flashing me...

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

TS3694 i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

Windows always shows lock screen when idle, ignores setting

Similar Messages

Maybe you are looking for