Windows and iTunes do not recognize my iPod..... HELP!!!!!!

Hello!
HELP PLEASE!!! Windows Vista and iTunes do not recognize my iPod!!   I dont understand why because everything went well for at least 2 weeks!!   But now, my Ipod only appears even more in my computer, so ITune do not recognize on.  
I need your help before remove ITune and all Apple produces. This is what I do if I made a following Apple support but before mde this, I need your help for to see if there's something simple to try before.
I'm open to any good suggestion!
Thank you!
Zazzz
P.S. Sorry for my English, I do my best.... because i'm french.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

    my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • Ipod was corrupted i restored it now windows and itunes does not recognize

    one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • My Computer and Itunes will not recognize my ipod

    I recently had to reinstall itunes on my computer. Now, my computer and itunes won't recognize my ipod. But I can change it from my computer. Does anyone have any suggestions on what I should do? I would really like to update my ipod!
    Thanks.
    nb

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • Windows and iTunes does not recognize

    yada, yada...
    I tried the Rs, but my new computer and iTunes does not recognize my shuffle. Can someone give me basic steps to correct this? Shuffle was previously 'synched' with another iTunes library and I don't want to erase my currently uploaded music. Help please!

    I don't know if this is the same problem, but I cannot get my I-pod Nano to sync or have I-tunes recognize it. It is a connector problem, and this is my second Nano to do it within nine months. Apple wants $32 to send it in to be repaired once again. I am irritated beyond belief. I took my Nano in to an IMAC store and they confirmed that it was a connector problem. They could not send it off nor repair or replace it though. So I've had two Nano's since Christmas have this problem.
    I would suggest that you try another device (shuffle) on your computer to ensure that it's not your computer (our other I-pods worked on the computer) and/or take it in to an IMAC store where they will see if it connects to one of their computers.
    Right now I think Apple products are basically crap...

  • Windows and iTunes do not recognize iPod

    Help! I have read everything in this forum and have not found the solution yet. I have the 30gb ipod video and I've had it for almost a month now and it doesnt work. I've tried the 5r's.. didnt do anything.. when i connect it to my laptop, it says its charging.. it also tells me that it would work better with a 2.0 usb, but according to the specs, it should still work with the 1.1 usb. Also, when i look at it in the device manager, it says "Location: Location 0 (iPod)" and "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." but when i try to reinstall them from the cd, it says they're not there.. i'm not the only one having this problem.. from all the posts.. is it possible its the cable? I dont have another computer to try it on.. HELP!

    Frustrated Mom,
    I am having the exact same issue. It all worked fine
    yesterday (the first day I used it) and now today
    there is no recognition on either
    computers...anywhere. I called the Apple S.O.S. line
    and they took me through all of the possible fixes.
    Nothing worked. In the end, they suggested that the
    iPod is faulty and I should send it in to have it
    repaired. I just got it yesterday so I will be
    calling MacMall back for an exchange, otherwise I
    just paid full price for a refurbished item. Not
    cool.
    Good Luck,
    Doug
    I had similar problems with my office Dell (Windows XP). My 60GB Video iPod works fine at home with my ibook, but when I first used with iTunes on this Dell I could only get it to intermitently recognize the ipod the first day. The next day the PC would recognize it was in the USB in that it showed up in the lower bar of devices to remove, and it would run the ipod service program and then start itunes (still does this) but it would not show up in itunes any longer or as a drive any longer in Mycomputer. On the other hand in an identical Dell in office nex to mine I was able to use it fine the last 3 days when it no longer worked on my office Dell.
    After some experimentation the fact that the iPod service runs when I put my iPod into the USB port and then runs iTunes shows the PC sees it. And I can eject it via the device eject icon on bar at screen bottom. I determined the reason the Dell in other office sees it while the one in my office no longer sees it in iTunes is likely due to the fact that I do not have administrative access to my PC and iTunes is not installed as my default application. The Dell next door has iTunes installed as default application for music and thus I have no problems.
    It shows my iPod is ok but the PCs (not my ibook) vary in response due to minor differences (such as not being default application for music in my case --at least that appears to be cause which I will test later when I get my itunes set as default application). You may want to look at issues with iTunes rather than the iPod being faulty?
    Russ Jacobson

  • ***FIX FOR Windows and iTunes do not recognize iPod***

    For everyone who has a new ipod and windows isnt recognizing it or giving you the message "new hardware found" and then telling you the drivers are missing follow these steps (thanx mrlogs!!!)
    1. go to www.driverguide.com and sign up (for free)
    2. download usbstor.sys & usbstor.inf (and take note of where you download them to)
    3. update drivers by selecting folder you downloaded the two files to
    4. restart computer
    5. open itunes and then connect ipod
    it took a couple seconds for my itunes to recognize the ipod, but it finally worked!!!
    -jackie
    hp laptop   Windows XP   30 gb iPod video

    how do you update the drivers? i downloaded the files and unzipped them but when i click on them winzip appears again and i do the tasks to unzip and it saves in a new folder made. is this all i have to do? i really need my ipod to work pleasssee help

  • COMPUTERS AND ITUNES WILL NOT RECOGNIZ MY IPOD NANO

    MY NANO IPOD IS NOT RECOGNIZED BY MY COMPUTERS OR ITUNES.   WHEN I TRY TO SYNC IT IS IN GREY AND WILL NOT LET ME SYNC

    Have you tried looking at the system requirements? It might be that you have an old version of itunes or operating system
    Here are the system reqrements for an iPod nano 7th gen
    Mac computer with USB 2.0 or 3.0 port, OS X v10.6.8 or later, and iTunes 10.7 or later4
    PC with USB 2.0 port; Windows 7, Vista or XP Home or Professional (SP3) or later; and iTunes 10.7 or later
    Internet access required; broadband recommended; fees may apply

  • Windows and iTunes won't recognize my iPod

    I got a new iPod couple of weeks ago and it worked all well for a while. Then added some videos on my iPod and suddenly I realised the "other" files in iTunes has grown up to 700Mb. After deleting the videos the other files were still there and I started having problems when connecting my iPod to the PC.
    Windows started telling me my iPod isnt working properly and I just used another USB port and after a while restored my iPod. After restirong, the slow USB ports of my PC sometimes recognized the iPod but now even they dont work.
    I've tried connecting my iPod to all the USB ports of my PC and also used different cables and I'm turning desperate. The iPod is charged when I connect it to the computer, but it does not show up in iTunes nor in My Computer anymore.
    Update: Now it doesn't charge anymore. Windows still says it is an unknown device and I can use my ipod normally even when it is connected to the computer as if there was no connection.
    More updating: I rebooted the ipod while it was connected and now iTunes found it. I still don't know for sure if the problem is solved.
    iPod 30g (New) Windows XP Pro

    You should use a USB port on the back of your computer when you connect. What other devices do you have connected to the USB chain (other than your keyboard and mouse)?
    You need to read this article: http://docs.info.apple.com/article.html?artnum=305136 Even if no new driver is available for your computer, reload the USB Driver following the instructions in the article.
    Once your iPod can be seen in Device Manager in Windows, change the drive letter on the iPod to something higher (try M or P) and then reformat it (FAT32 format, don't do a quick format). After this Restore it in iTunes.

  • Windows and iTunes are not recognizing my iPod touch 4g

    ok my ipod touch was jailbroken and it was a tethered jailbrake b4 it used to connect to my PC and my itunes with no issues but than my friend got me a AC adapter and i didn't use to charge my ipod on my PC anymore only if i needed some songs and stuff to add to it but than i ran out of bettery and i had to connect it so i can do the boot tethered and it never shows up at all and this took me already 2 days trying to get it fixed and still not workinh please someone help me fix this problem and if i have question: If i take it to apple store are they gonna fix it for me ? because its jailbroken and it does not connect to pc to run boot tethered . can they atleast restore it for me in the store becuase i will have no problem if it turns back on as long as i got the ac adapter pls heLP

    Apple will not help you fix your jailbroken iPod. Have you tried to place he iPod in recovery mode and then restore via iTunes.  For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Windows says it does not recognize my ipod HELP please

    Had ipod for 3 days. Worked fine. Last time I docked it, gave me an error message saying it was not recognized becuase it was malfuctioning. Reset, restored, re booted, reinstalled itunes, deleted apple auto update, changed ports, you name it. So I took it back to the store and plugged it into a PC and a mac, using my cable, and it works fine. My other usb devices working fine. I tried a windows restore to when it was working, and for some reason I get another message saying that it cannot be restored (never had that happen before......). Any new ideas would be appreciated. Thanks
    PC clone Pentium 4 3.x   Windows XP Pro  

    I fixed mine. right click my computer>properties>hardware tab >device manager. The I went down to usb controller and clicked the plus sign. there was listed 3 usb something controllers or hubs. Right click and choose disable on them one at a time and see what happens. My ipod was instantly recognized. when i went back and enabled what i had disabled, it was no longer recognized. I have no idea why it worked for me but it did. Try it at your own risk. Good luck!

  • No matter what i do i cant restore my iPod and iTunes will not recognize it

    no matter what i do i cannot restore my iPod to factory settings and iTunes will not recognize my iPod but Windows will (i've tried everything) please help me

    what happens when you connect your ipod to the computer?
    did you follow these procedures for reset and restore?
    Resetting
    Restore your iPod

  • After downloading iOS 6 ipod is flashing apple and itunes does not recognize

    I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it.  help?? it is only 8 mos old

    - See if placing the iPod in Recovery mode will allow a restore.
    - If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
    - Then time for an appointment at the Genius Bar of an Apples store.

  • 5g wont boot past logo and itunes does not recognize

    i have tried all the holding down of the buttons that are out there with no results.  Windows and itunes will not recognize and touch will not go into connect to itunes screen.

    Try the remaining actions of:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Copy of leading document(PO) not having the same data as created in SRM

    SRM5.0 Extended Classic Scenario I have created the SC and PO for that is created successfully as 700006304. Now when I am trying to create any SC after that, the leading document of EBP goes into error in process in follow on document block. All the

  • Will Adobe ever fix the UI text font size issues in CS6 apps?

    Having recently installed CS6 on my new Windows computer, I find some serious issues with font sizes in the user interface (and not only in Dreamweaver, but in several--but not all--the applicaitons). You'd think that with a 27-inch screen, font size

  • MS-9130 trying onboard SATA for first time, BIOS error messages

    I have a K8T/MS-9130 based system with a single OPTERON 144 CPU and 2GB RAM. It was in service for a long time, then stored, now I am returning it to service but need to use SATA HDD. When I enabled SATA on BIOS, I now receive messages like this, dur

  • Paging not working

    Hey guys,      I am having major trouble getting paging to work with my datagrid.  Here is what is happing right now.  After data is send to ColdFusion CFC, "count" function is called, and returns correct result, but then the "get" function is called

  • Hp 6500 all in one

    why dose my new printer want to print 35 pages when it should fit on two? This is only when on the Internet. This question was solved. View Solution.