Windows and OSX won't boot after partitioning

Hi so I have a 2012 MacBook pro, it is running mountain lion and I also boot camped it and installed windows 7. I partitioned the hard drives correctly and it has been running great. Today I was on windows and used the disk manager to shrink my windows partition so that I could create another seperate 5gb partition for school. After I did this, my computer was running fine until I restarted it. When the windows logo appears while booting, it freezes and it flashes a blue screen and then shuts down. When I hold down the option key to boot into Mac OSX, the only option that comes up is windows, not even my recovery disk.
How do I fix this? I need to boot into these because all of my school things are on these drives. Please help

Never in my reply did I say I don't use Boot Camp or not to use boot camp. But I don't. And I don't have Windows installed in its own partition. I use a VM for Windows on my Mac for the few Windows programs I run on the Mac.
I started to read that reply but then didn't finish it as that poster was talking about Win 8 and AFAIK right now neither Boot Camp or the driver package supplied by Apple for Windows supports Win 8. Even though it isn't much different then Win 7.
It does create a Separate partition, as does Win 7, that is a hidden partition, just like Win 7 does, but it is different in some ways from Win 7. So that may of been the original problem that poster was having.
In any event I don't think that post will help the OP of this thread. But I may be wrong. Only time will tell.
The big reasons I don't use Boot Camp is I can't stand Dual Boot system and that I can't Re-Partition the BC partition without screwing the whole system up. Tried it, didn't care for it, then removed it and went VM.
wjosten wrote:
You read that thread I provided the OP a link for...don't you use Boot Camp? Got any better ideas?

Similar Messages

  • Windows 8.1 won't boot after VS 2013 express for windows (metro) installation

    I have purchased HP Pavilion e115sm  with AMD A-10 processor and 12GB of RAM notebook, installed windows 8.1 on it, i updated windows with "windows update" and installed all drivers needed. After that, i have tried to install VS 2013 express
    for windows (metro). VS installation asked to restart windows after, so that some updates or whatever can be installed. 
    After restart, i just got windows logo with dots rotating and got stuck on that for several hours.
    I turned it of after several hours, delete all partitions on disk, recreated them again and reinstalled windows with all updates. I tried to install VS again, but got same "logo screen" with rotating dots again for several hours...
    Can someone help me with this?

    Hi,
    Would you please first check if the system can startup into Safe mode?
    Then, please try the startup repair in Advanced menu after you boot your computer via installation media.
    How Run "Automatic Repair" to Fix Startup Issues in Windows 8 and 8.1
    http://www.eightforums.com/tutorials/2843-automatic-repair-run-windows-8-a.html
    Then, if the issue still persists, try to boot PC in WinRE, and enter command prompt to run following commands:
    bootrec /fixmbr
    bootrec /fixboot
    bootrec /scanos
    bootrec /rebuildbcd
    Detailed steps, please refer to this link:
    Windows 8 Boot Issues? Try Fixing the Master Boot Record (MBR) or Boot Configuration Data (BCD)
    http://www.techspot.com/guides/630-windows-8-boot-fix/
    Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
    Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
    completely understand the risk before retrieving any software from the Internet.
    Keep post.
    Kate Li
    TechNet Community Support

  • Windows 8.1 won't boot after repair loop fix

    I have a 1 year old Gateway desktop with Windows 8.1 installed at the factory so I have no Install disk. My problem began when the computer went into a repair/recovery loop which I found out is a common unresolved bug for Windows 8.1. After hours and hours
    of internet search and trial and error I was able to get the repair loop resolved by going into command prompt and typing "bcdedit /set {default} recoveryenabled No}". I then tried rebooting and the Recovery page came up stating:
    Your PC needs to be repaired.
    The operating system couldn't be loaded because a required file is missing or contains errors.
    File: NETIO.SYS
    Error code: 0xc000000f
    When I tried all of the options to address this problem none of them worked. I can't even boot into safe mode. Any suggestions? 

    Hi Boomer3s,
    Can we boot into the Windows Recovery Environment now (Restart and keep pressing "Shift")?
    If the Windows Recovery Environment is not available ,we can choose to boot from a installation media .We can make a Windows 8.1 installation media here.
    Create installation media for Windows 8.1
    http://windows.microsoft.com/en-HK/windows-8/create-reset-refresh-media
    a)      Insert the installation DVD or USB and boot Windows 8.1 from it.
    b)      In the ‘Windows setup’ page select the ‘Language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
    c)       Click on ‘Repair your computer’ and select ‘Troubleshoot’. 
    d)      Click on ‘Advanced options’ and select ‘Automatic Repair’ and select the operating system.Or the "System restore option "
    Hope this helps
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Mac OSx won't boot up after update to 10.6.7?

    Mac OSx won't boot up after update to 10.6.7?

    Hi Mike
    This is called a kernel panic, similar to s 'blue screen of death' on Windows. When you say you reinstalled 3 times, do you mean the OS or the Update?
    When does this kernel panic appear? You may have a hardware issue if it's happening on boot.
    Taylor

  • Mac won't boot after updating to OSX 10.6.4

    I am on my 3rd Mac that won't boot after updating to OSX 10.6.4. One MacBook Pro and two iMacs. I fixed one but the last two are getting the better of me. HD is not fried. Have tried every keyboard shortcut on startup, Disk Warrior via. Target Disk, repairing permissions in single user mode. The machines will not boot off of a CD or DVD and it will not boot up in safe mode. Something in the startup files is preventing startup. I am suspecting Sophos antivirus. I tried to uninstall it and trash it but I think it's still blocking something. Any help would be appreciated.

    Got it! Not sure if removing Sophos had anything to do with it but here's what I did.
    1) boot dead machine in Target Disk Mode (iMac)
    2) boot good machine off Snow Leopard disk (MacBook)
    3) install OS to dead machine- I found this next part very curious. When the install was complete the MacBook restarted as the iMac.
    4) ran software updates
    5) shut down MacBook then shut down iMac
    6) rebooted iMac- all was good
    I actually did this twice because a co-worker had the exact same problem on her MacBook Pro. Got both fixed today.
    Thanks everyone for your help!

  • IMac with bootcamp and parallel boots into windows 7 but won't boot intoxc lion.

    IMac with bootcamp and parallel boots into windows 7 but won't boot into Mac OS lion?

    Hi,
    Thanks for your suggestion. Actually that was not the problem, because I had the Mcintosh drive set as my boot drive. The answer was that my Lion Os got somehow corrupted and I had to reinstalll Lion. This was all after I discussed the situation with the Apple Support people.

  • 22" iMac desktop OSX 10.6.6 Snow Leopard and it won't boot. I've tried shift start, option command+P+R. It's stuck at the restart, all I see is the spinning wheel below the apple logo.

    I have a 22" iMac desktop running OSX 10.6  Snow Leopard and it won't boot. I've tried shift start, option command P R. It's stuck at the restart, all I see is the spinning wheel below the apple logo. And I lost my OSX DVD is there any way to fix this? I just did a software update yesterday and have about 20GB left on my Hard drive. The last thing I did was try to install some plugin's for Pro Tools 8, but it wouldnt let me install so I restarted and now I'm screwed. Please Help!
    other specs for my computer: 3.06GHz Intel core 2 duo processor 500 GB Serial ATA hard drive, iSight, magic mouse, wireless mac keyboard
    iPod classic 160GB (Late 2009), Mac OS X (10.6.6)

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • Mac won't boot after the latest update. It is loading the update and suddenly shuts down

    My MacBook Pro won't boot after a minor update. The update was all fine and my Mac acted like it used to but when I tried to boot my Mac it just loads the the update then goes back to the Apple logo and then shuts down.
    I hope that someone has got a solution because I do not want to restore my Mac for the 4th time.....

    Hello JonasHallund,
    We've an article that contains information and steps that can help get your MacBook Pro to boot again.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Cheers,
    Allen

  • Would I be able to use the same external hard drive for Windows and OSX?

    I plan to get an external HD to put a lot of my multimedia files on and for backups but I don't know if I'll need an individual one for each operating system. I am going to be running a MacBook Pro with both Windows and OSX through Boot Camp.

    jengwall,
    No, you won't need more than a single drive. There are several options to meet your needs.
    OS X can partition your external, and the formats for the various volumes can be HFS+ (the native Mac format) or FAT-32 (Windows format). While OS X cannot create NTFS volumes, and it cannot write to them, it can read them. Any FAT-32 volumes created in OS X can be converted to NTFS by Windows, if and when you like.
    Windows cannot natively read HFS+ volumes, and only the FAT-32 format will be both read and write for both Windows and OS X. However, there are some third-party solutions.
    "Macdrive" is a Windows utility that allows it to access HFS+ volumes as read/write. On the Mac side, there is "MacFuse," which gives OS X the ability to not just read, but write to NTFS volumes.
    Scott

  • [SOLVED] Arch won't boot after I created a separate /var parition

    Arch won't boot after I created a separate /var parition on an existing installation.And let me confess: it was maybe stupid trying to do it on an existing install.
    I edited the fstab correctly, copied the files using rsync preserving permissions. Then I kept a backup of /var using tar. Then went on to delete everything under /var, ie /var/*, the /var folder is still there. All this I did from a live CD. After that I booted into my arch linux. Here I get messages about systemd successfully finishing fsck on each of my partitions, then the screen starts blinking. And there is no more output. Pressing Ctrl+Alt+Delete causes systemd to stop its services and reboot.
    Having realized I had borked my system, I removed the /var line from fstab and restored /var from the tar file I made earlier. Again I did this from a live cd. Rebooted into my arch system, and again similar issues, namely that after fsck and messages informing a few services had started, the screen keeps blinking.
    The live cd I used for reorganizing my partitions was elementary OS freya. They have GParted in there. I also have an arch install iso lying aroung from May 2013. If necessary, I can download the latest version. I am currently typing from a Windows installation I dual boot from.
    I don't know how to extract any boot logs as I am locked out of the system. Here is my fstab in any case:
    # Filesystem information
    # /dev/sda5 LABEL=fs_root
    UUID=b9d739cf-fd8c-46dd-a919-bd827dc47c66 / ext4 rw,noatime,data=ordered 0 1
    # /dev/sda9 LABEL=fs_var
    UUID=ec0f7a49-dccd-43ab-8651-9aa3fdb41cc7 /var ext4 rw,noatime,data=ordered 0 2
    # /dev/sda2 LABEL=fs_boot
    UUID=0e8ab31a-3bda-4b85-a901-a36f21b1583d /boot ext2 rw,noatime 0 2
    # /dev/sda6 LABEL=fs_home
    UUID=d9e63c47-274e-447f-ad01-0d97afe0fd34 /home ext4 rw,noatime,data=ordered 0 2
    # /dev/sda7 LABEL=fs_swap
    UUID=7301227c-e9f3-41b8-9d0f-4cf3c159491c none swap defaults 0 0
    # /dev/sda3 LABEL=fs_win
    UUID=12B639D1B639B5D7 /fs_win ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,nofail,noauto,x-systemd.automount 0 0
    # /dev/sda3 LABEL=fs_share
    UUID=D272269772268079 /fs_share ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,noauto,nofail,x-systemd.automount 0 0
    I would greatly appreciate any help.
    Last edited by richcocoa (2015-05-03 18:04:44)

    Have you moved everything from /var to /new_var (i named it for learning purpose)? You shoud copy content from /var but not on the fly but booting from arch iso cd, and than you shoud mount your / into arch-chroot environement, mount all of your mount points and than copy content from default /var to new /var. The copying should be done with this
    cp -rax
    and you can add -v switch to verbose output. I have my own /var moved the same way.
    The simples way is:
    -boot the arch iso cd
    -mount all of your mount point (i created here in this step /new_var to move /var to a new place, and this /new_var i put in /etc/fstab as /var later)
    -copy /var to /new_var with -rax or -vrax (recursive, archive, this filesystem or verbose, recursive, archive, this filesystem switches)
    -umount all of it
    -reboot.
    Last edited by firekage (2015-05-02 07:49:20)

  • IMac 8,1 won't boot after Lion Install.

    Hey guys,
    I have an iMac8,1 with a 2.4GHz Intel Core 2 Duo that I just installed Lion on.
    It previously had Leopard on it, but after shutting it down to boot from the USB stick that I had made on my MacBook, I pressed alt to show the device selection menu. There were no options except EFI boot with an orange drive, which I took for the Lion stick that I had made. Installing Lion went without a hitch. I formatted the drive that Leopard was on and did a clean install. After it was finished, I set up Lion and set up a Boot Camp partition so that I could install Windows 7 side by side with it. I booted into the device selection menu (holding down alt/option while booting) and it showed me a completely blank screen. No Macintosh HD, no EFI boot, no Windows DVD, nothing.
    I put the flash drive back into the machine, and kept restarting it and seeing the same result, until all of a sudden it decided to finally start, and I saw the Apple logo. After a while, though, it became apparent that it was not booting into OS X Lion on the hard drive, but rather the Lion Install.
    I have no idea what to do with this machine. It was running extremely slowly before I started trying to fix it, and it didn't make sense to me that a machine with fairly capable specs (I have the same processor and 2GB of RAM on my MacBook and it runs great) would run so catastrophically slowly.
    Also, I'm now in Disk Utility running from the Lion USB and it a) sees both partitions and mounts them fine, b) says that "The volume "Macintosh HD" appears to be OK", after Repair Disk c) is unable to fix or verify disk permissions.
    I'm at a loss as to what to do. Can anyone help?

    If you have backups of all OS X and WIndows data on the internal drive, I suggest you partition it with the default options (GUID partition table, one data partition) while booted from the USB device. Install OS X and test. If you can boot in that configuration, restore your OS X data and then run Boot Camp Assistant, if you wish.
    If the above procedure is unsuccessful, the machine has a hardware fault.

  • Mac won't boot after power chord became unplugged accidently.

    Mac won't boot after power chord became unplugged accidently.
    I have a Mac Mini running very latest version of OSX. I was making a recording with QuickTime; when I needed to plug in a USB recording device into the back of the Mac Mini, as I pulled the Mac off my shelf to do this, the power cable came out and the Mac lost power.
    I plugged it back in and powered up the Mac. I get the grey screen with Apple logo and the spinning grey wheel; then it goes to a blue screen (as usual) and I get the "starting OSX..." progress bar. When the progress bar finishes, I'm left with a blue screen only, no dock, no apple icon at top left, nothing across the top, no nothing.
    So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen.
    I have another iMac G5 machine, so is there any way I can at least retrieve the important HD files from the Mac Mini to my G5, before throwing the broken Mac Mini away?
    Can anyone advise please?

    Hi, Nigel.
    Not to differ with my colleagues here, but there's an important question that wasn't asked.
    1. You wrote: "So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen."Did Disk Utility report any errors it could not fix when you ran Repair Disk? I suggest you run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    2. You may also want to run the Apple Hardware Test that came with your Mini to be sure nothing shorted when the power cable was removed from the computer. I've seen it happen, hence I usually recommend removing the power cable at the wall before disconnecting the power cable from the computer. See my "Apple Hardware Test" FAQ.
    3. Repair Disk gives your Mini a clean bill of health, the blue screen may be the result of some Startup or Login item that was corrupted due to the sudden power outage. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem and may help you avoid and Archive and Install.
    4. If you elect to go the Archive and Install route, see my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
    5. As FYI, this is the kind of problem that makes one glad they've implemented a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ. Computing without a comprehensive backup and recovery solution is like driving without auto insurance.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • My Mac Pro won't boot after installing the latest update

    Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
    Thanks

    The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
    The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
    Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
    Have you tried normal mode again after your Safe Boot?

  • IMac won't boot after iTunes Match - Get diskos2 i/o error. Help!

    So after almost 24 straigth hours up uploading songs to iTunes Match, I woke up this morning and my iMac wouldn't boot. Gets stuck on the gray screen with the apple logo. I booted in verbose mode keep getting a "diskos2 i/o error." With a little googling some people say it's a bad sector and to erase and reinstall Lion others say it's a failing hard drive. Disk Utlity in Recovery Mode says the drive is ok. Any thoughts out there on what I should do? Thanks!

    I am having the same problem. The machine loads just to the point when it says "Loading Mac OSX", then its non responsive for hours. The keyboard and mouse still work, but it won't move past that point.
    When I try to repair the disk, it gives me an error message indicating that the disk cannot be repaired. I am bad at backing up my files, so I want to avoid a fresh reinstallation.
    The worst part is I had just purchased Disk Warrior, and that won't boot up.
    If no solutions are found, does anyone know a way that to initiate the computer in disk mode, so I can hook up another Mac to it, and save all the files?
    -alfredo

Maybe you are looking for