Windows asks me for the gpibtnt.vxd driver but i´ve installed it

I have a toshiba with O.S. windows 95 and I´m trying to connect it to a PCMCIA-GPIB card, but after I have installed the software , in settings/system/ windows says that the gpibtnt.vxd which was to be the driver it is not installed! Could the problem be the previous instalation of other software?

I have a similar problem on cpac.ca. I checked to make sure that the most recent Windows Media Player (1.0.0.8) plugin was installed on the plugin page. I did the same with the Plugin folder. It only seems to fail on the embedded video player. cbc.ca radio streams work fine. I also checked on the test page suggested by the Mozilla help page. It didn't work either. The Safari Browser plays cpac well.
I tried disabling other plug-ins but that didn't work. This is somewhat of a puzzle. Whatever the answer is, I think it will be interesting.
@firefox4.0user I don't know if you have had a previous version of Firefox or not but the old answer was to install a special plug-in. That is covered on the Mozilla support page entitled "Using the Windows Media plugin with Firefox." It is a somewhat challenging task. If you are a first-time FF user and you can get cpac.ca to work after following the instructions then the problem that I am having has to do with how the Firefox Upgrade program worked.

Similar Messages

  • I need to know how to active my ipad , the ipad is asking me for the old apple ID but i don have it ,and i don't remember it can any one help?

    i need help please!!!

    Call AppleCare, ask to be transferred to the Account Security Team and get you old Apple ID and password.

  • I erased the account i used to set up an iphone 5,and since i forgot the password i went into dfu mode and restore it, now it's asking me for the email i used, but there's no email anymore, is there any way to keep using it?

    i tried restoring and taking out the sim card but that only makes it not funtions, is there a simple way to just get over this thing or to change the email address without putting an email?

    i forgot my apple id and now when i reset my phone .... in setup process its askin the apple id but i forgot it what to do now

  • I erased the account i used to set up an iphone 5,and since i forgot the password i went into dfu mode and restore it, not it's asking me for the email i used, but there's no email anymore, is there any way to keep using it?

    i tried restoring and taking out the sim card but that only makes it not funtions, is there a simple way to just get over this thing or to change the email address without putting an email?

    I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

  • I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of the

    I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of these ids are obsolete and I have no access to those accts. The songs all played on my old computer without prompting me for a password.
    Any ideas how I can get around this hassle and get them all to play? We're talking about 800 songs that are being obstinate. The new computer is authorized under my "new" Apple id, which I have used for years.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

    I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
    Also Time Machine does not back up a boot camp partition.

  • I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

    I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

    I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

    If the Mac's firmware was updated, you can try this Internet Recovery:
    Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
    FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
    If the firmware was not updated, then you can use the SL install disk.

  • Regarding Mail:  When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password.  THis is very annoying.  How can I prevent this?

    Regarding Mail:  When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password.  THis is very annoying.  How can I prevent this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Windows Vista claims for "Bluetooth Peripheral Device" driver

    When I connect my iPhone via bluetooth to my computer for "tethering", Windows Vista claims for "Bluetooth Peripheral Device" driver and i can´t connect.
    Where is the driver? Anyone knows it?
    Thanks!

    My Mac Book Pro decided to update with windows update ... I lost bluetooth and when my machine started up it said found new hardware ... and proceeded to look for the driver BCM2046A ... its not on the Mac Discs nor on the XP Disc ...
    I searched and searched and searched ..bump
    I then found this link download and use ... and pass on ....
    http://www.broadcom.com/support/license.php?file=SetupBtwDownloadSE.exe

  • I need help! i am trying to update iphoto on my macbook pro that i had bought from someone else. although i am signed into my account when trying to update it is asking me for the previous owners account details and it wont let me change it to my details

    i need help! i am trying to update iphoto on my macbook pro that i had bought from someone else. although i am signed into my account when trying to update it is asking me for the previous owners account details and it wont let me change it to my details how can i solve this problem please.
    thank you
    Jan Robinson

    That's because the Mac, OS X and the iLife apps that came preinstalled on the Mac all belong to the previous owner. The previous owner needs to call Apple care and have their Apple ID disassociated from the Mac. Then the hard drive needs to be totally erased and OS X and the iLife apps reinstalled using OS X Recovery.

  • My hp mini 1000 asks me for the current password

    Hi I'm having a problem with my laptop it is blocked and asks me for the current password after attempting for three times it says "password check failed
    fatal error... System halted
    CNU9321ZHJ

    Hi,
    Try entering:       e9lof730zw             ( Note that the 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Aperture forgets it license and asks me for the serial number over and over again

    Hi,
    This is getting ridiculous to the point where I'm thinking of just ditching Aperture.  It's continually forgetting is license and asking me for the serial number over and over again.  I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not  accepting either of them. What's going on and how do I fix it permanently?
    Thanks,
    Rob

    Rob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
    http://support.apple.com/kb/DL1610
    About Aperture 3.4.3
    Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
    Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
    Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
    When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file  or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    Hi...I have this problem, everytime I want to print something out the mac asks me for the computer password...that is really becoming annoying after. That happened since I upgraded to mountain lion. How can I stop the computer from asking me that?

    If you are printing via a Windows shared printer and it is the Windows user account that you are being prompted for then you can save this in the Keychain, as shown below.

  • Hello  J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?  138 photos not having been imported were found in the iPhoto library(bookcase).  Would you care for import them? Yes or no you already have meet this

    onjour
    j ai des probleme au demarage d iphoto le dialogue s affiche et  me demande le  texte suivant ?
    138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
    Souhaitez-vous les importer ? oui  ou non avez vous deja rencontrer ce proble  si oui pouvez vous m aider
    Merci
    Hello
    J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
    138 photos not having been imported were found in the iPhoto library(bookcase).
    Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
    Thank you

    Open your iPhoto Library package with the Finder as shown in this screenshot
    and look in the folder named Auto Import.  Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes.  Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
    OT

Maybe you are looking for