Windows Azure Virtual Network - Access is denied Error 0x80070005

Installed a Virtual Network, all options default, setup Gateway, created and uploaded Certs, downloaded 64 bit VPN client. Windows 7, fully patched, AV client disabled.
When I attempt to connect I get:
Access is denied.
(Error 0x80070005) For customized troubleshooting information for this connection, click Help
I see many similar posts, but no answers. Has anyone gotten Point-to-Site to connect? Is this not supported in the free trial and MSDN accounts?
Operating System      : Windows NT 6.1 Service Pack 1
Dialer Version        : 7.2.7600.16385
Connection Name       : 84810c9d-721a-4e79-abca-29ad922735c2
All Users/Single User : Single User
Start Date/Time       : 11/8/2013, 13:50:17
Module Name, Time, Log ID, Log Item Name, Other Info
For Connection Type, 0=dial-up, 1=VPN, 2=VPN over dial-up
[cmdial32] 13:50:17 03 Pre-Init Event CallingProcess = C:\Windows\Explorer.EXE
[cmdial32] 13:50:25 04 Pre-Connect Event ConnectionType = 1
[cmdial32] 13:50:25 06 Pre-Tunnel Event UserName = Domain = DUNSetting = 84810c9d-721a-4e79-abca-29ad922735c2 Tunnel DeviceName = TunnelAddress = azuregateway-84810c9d-721a-4e79-abca-29ad922735c2-0.cloudapp.net
[cmdial32] 13:50:29 21 On-Error Event ErrorCode = -2147024891 ErrorSource = RAS
Other users with a similar issue:
http://stackoverflow.com/questions/16320918/windows-azure-virtual-network-point-to-site-connection-error
Still more:691
Access denied because username and/or password is invalid on the domain.
How does username and/or password make any sense? It hasn't asked for any credentials, it just fails.

Hi,
Thanks for your response.
Did you configure the Point-to-Site virtual network using this article?
Configure a Point-to-Site VPN in the Management Portal
http://msdn.microsoft.com/en-US/library/windowsazure/dn133792.aspx
After the virtual network is created, you may create the gateway as the link mentioned.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

[HELP!] Can't access shared folder from Azure Web Role on same Azure Virtual Network

I have an Azure Virtual Network that has a virtual machine acting like an app server running some legacy applications that is writing some files to a folder that is shared.
This shared folder is accessible from other virtual machines within that virtual network without issue.
The problem I am having is that I have an Azure Web Role that is also attached to the above
Azure Virtual Network that is unable to access the shared folder. I know the web role can see the app server as it is able to ping the IP of the machine.
There is some code that needs access to the shared folder to process some of the files that is stored there, but the code won't run because it can not access these files. I used Remote Desktop to see if I could ping the machine, and I can, but I cannot navigate
to the path in file explorer due to access being denied.
Can anyone offer any advice or tips to point me in the right direction to gain access to this shared folder from my Azure Web Role?

Hi Robert,
Thanks for your posting!
Form your descirpiton, I suggest you can refer to Tom Zhang's solution via this
link:
1. Enable Remote Desktop. (You have done this step)
    2. RDP to one instance of your service. Open up IIS Manager and set the application pool identity to use the account that we used for RDP.
    3. On on-premise local machine, right click "My Computer' and select "Manage". Add a new account with the same account name and password as we specified for Remote Desktop.
    4. Give the new account necessary permissions to write file to the shared folder. (I think you have done this step too)
    5. Try running the code again and see if it works.
    6. If it still says "access to path <folder path located on local machine> is denied". Please check the permission of the shared folder again.
    7. If it works, then the next step is to configure the application pool identity using Startup Task instead of using Remote Desktop (See the suggestion inhttp://social.technet.microsoft.com/Forums/en-US/windowsazuresecurity/thread/247ba75e-87d9-497c-9ec6-1fd4e2c7ff90).
But I still recommend you enable Remote Desktop for your web role to check if the Startup Task has successfully configured the application pool identity or not.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Window.open in IE with URL "file:///" results in "Access is Denied" error

Hi All:
In a JSP, which gets launched with HTTP or HTTPS protocol, we have a link to open/view the file(attached from local PC) after it gets uploaded to the server. We used the "file:" protocol to open it in a new window. Currently we are stuck with a problem. We are getting "Access is denied" error when trying to click the link in IE 6.0. It used work in XP until SP1. And we read that starting with SP2 this problem is occurring and it is coming because of the change in Protocol (lauching a window using "file" protocol from a page lauched with HTTP(S) protocol).
We did some research over the NET but could not find a solution to overcome it. Could you please share with us if you have any ideas or soultions with us. It will greatly help us to proceed. Appreciate any help in this regard.
Thanks in advance...
-Shiva

Thanks for the reply.
But it will be simpler to open the attachement from the local directory from where it got selected for uploading. We have been doing this until we hit this roadblock.
Any solutions to over come ??

MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Ray

https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

How to create azure virtual network by programming

Hi everyone
i want to create azure virtual network by programming
Doese anyone know how?
My way is create xml network config
and then call powershell
Set-AzureVNetConfig-ConfigurationPath
But if on manage portal is exist any network
It is impossible to create new azure virtual network
Thank in advance,
QP

Hello pham van quyen,
I am assuming that you are downloading the XML file from the portal and then editing it before you create the Virtual Network. You should be able to create a virtual network by using the set-azureVNETconfig command. But if you are connecting a gateway, please
use the Set-AzureVNetGateway.
I would suggest you to follow this tutorial that will give you information on Windows Azure Network using PowerShell:
http://blogs.technet.com/b/kevinremde/archive/2013/01/19/create-a-windows-azure-network-using-powershell-31-days-of-servers-in-the-cloud-part-19-of-31.aspx
If you are having issues with this, please let me know the related errors or failures.
Thanks,
Syed Irfan Hussain

Acrobat 9 Pro Trial Installation - Access is denied error

I am trying to install the trial version of Acrobat 9 Pro, but I consistently get variations of the Access is denied error:
Access is denied. File: C:/Users/[username]/AppData/Local/NOS/nos08632//nos483B.tmp (variations occur within the NOS folder, e.g. /NOS/nos08424//nosC1A5.tmp, etc.)
My only choice is to click OK, after which the installation quits. Within the AppData/Local folder is a NOS folder, which contains a TMP file that is not named the same as the TMP file in the error message. I delete the NOS folder and try the installation again, but still get the error message at around 30% (give or take a few %) into the installation.
I am running Windows Vista Home Premium SP2 on a 64-bit operating system with an Intel Core Duo CPU processor.
Any ideas?

Are you logged in at the administrator? Do you have anti-virus turned on? Are you sure your trial download is not corrupt (check the file size if possible)?

Getting 'access is denied' error when access Flight Example sample gateway service

Hi All, Greetings! I am new to SAPUI5. I am getting 'Access is denied' when trying to load data from the sample gateway service (Flight Example). Please help.
Here's the entire code:
view1.view.js
sap.ui.jsview("ui5_proj09_flightdemo.view1", {
      getControllerName : function() {
         return "ui5_proj09_flightdemo.view1";
      createContent : function(oController) {
     var serviceURL = "https://sapes1.sapdevcenter.com/sap/opu/odata/IWFND/RMTSAMPLEFLIGHT/";
     var readRequestURL = "/FlightCollection(carrid='AA',connid='0017',fldate=datetime'2013-05-01T00:00:00')/?$format=xml";
       var loginoDataModel = new sap.ui.model.odata.ODataModel(serviceURL, true, "my_sapes1_userid", "my_sapes1_pwd");
       alert("Before Service Call");
       loginoDataModel.read(readRequestURL, null, null, false,
                   function(oData, oResponse) {
                  alert("Success");
                         var result = oData.results;
                         alert(result.length);
                         if(result.length > 0){
                             webmodel.setData({modelData: result});
                             table.bindRows("/modelData");
                   function(oError){
                         alert("Error::"+oError.message); //getting 'access is denied' error message popup at this line
       alert("After Service Call");
          var oTable = new sap.ui.table.Table( {
id : "oTableid", // sap.ui.core.ID
width : "auto", // sap.ui.core.CSSSize
rowHeight : undefined, // int
columnHeaderHeight : undefined, // int
columnHeaderVisible : true, // boolean
visibleRowCount : 10, // int
firstVisibleRow : 0, // int
selectionMode : sap.ui.table.SelectionMode.Single // sap.ui.table.SelectionMode
//Define the columns and the control templates to be used
var oColumn = new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "City From"}),
template: new sap.ui.commons.TextField().bindValue("cityFrom"),
sortProperty: "lastName",
filterProperty: "lastName",
width: "200px"
oTable.addColumn(oColumn);
var oColumn2 = new sap.ui.table.Column({
label: new sap.ui.commons.Label({text: "City To"}),
template: new sap.ui.commons.TextView().bindProperty("text", "cityTo"),
sortProperty: "firstName",
filterProperty: "firstName",
width: "200px"
oTable.addColumn(oColumn2);
// oTable.bindRows("/modelData");
oTable.placeAt("content");
index.html
<!DOCTYPE HTML>
<html>
       <head>
              <meta http-equiv="X-UA-Compatible" content="IE=edge">
     <script src="resources/sap-ui-core.js"
                      id="sap-ui-bootstrap"
                      data-sap-ui-libs="sap.ui.commons,sap.ui.table,sap.ui.core"
                      data-sap-ui-theme="sap_goldreflection" >
              </script>
              
     <script>
          sap.ui.localResources("ui5_proj09_flightdemo");
                     var view = sap.ui.view({id:"idview11", viewName:"ui5_proj09_flightdemo.view1", type:sap.ui.core.mvc.ViewType.JS});
            view.placeAt("content");
     </script>
       </head>
       <body class="sapUiBody" role="application">
              <div id="content"></div>
       </body>
</html>
Regards,
Sai

Hi Sai,
You can refer my blog How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
Please go though it and see if it helps you to resolve this issue.
Regards,
Chandra

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

Adding a second ExpressRoute connection to an Azure virtual network with networkconfig.xml

We are trying to add a second ExpressRoute connection to a vNet in an Azure subscription. We have already successfully completed the connection to our first ExpressRoute (we are using the Exchange Provider method) using a combination of the virtual network
GUI and powershell cmdlet tools.
However... the GUI only supports adding one site-to-site VPN via ExpressRoute.
The method for adding a secondary site-to-site connection is to export the network configuration (via the Azure portal) and edit the resulting NetworkConfig.xml file - and then re-import this via the portal.
All good, in theory.
The NetworkConfig.xml file exported from the gui:
<Gateway>
<ConnectionsToLocalNetwork>
<LocalNetworkSiteRef name="XXXX">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
</ConnectionsToLocalNetwork>
</Gateway>
In conjunction with MS Support (with whom we are still engaged), we determined the following should work:
<Gateway>
<ConnectionsToLocalNetwork>
<LocalNetworkSiteRef name="XXXX">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
<LocalNetworkSiteRef name="YYYY">
<Connection type="Dedicated" />
</LocalNetworkSiteRef>
</ConnectionsToLocalNetwork>
</Gateway>
However, attempting to import this generates the following error message:
"The gateway in virtual network site XXX-XXX-XX referenced multiple local network sites and uses a connection type different than 'IPsec' for at least one of the connections. If a gateway references more than one local network site, the connection
type to all local network sites must be 'IPsec'. 'IPsec' is the default connection type."
This appears to suggest multiple ExpressRoute connections on a single vNet are not supported, which would be contrary to the MS FAQ here:
Can I have one virtual network connected to more than one ExpressRoute circuit?
Yes. You can link a single virtual network with up to 4 ExpressRoute circuits. All ExpressRoute circuits must be in the same continent. They can be ordered through different service providers and in different locations.
(from <link to ms site snipped>)
Does anyone have any idea how we should proceed?
Thanks

Hi Rich,
It looks like you are trying to combine S2S and ExpressRoute. Although at some point in the future we will have the ability to have them coexist, you cannot do so today. Therefore, you must delete the S2S gateways and create ExpressRoute gateways.
You could refer the following link for details:
https://msdn.microsoft.com/en-us/library/azure/dn606292.aspx
Can I use site-to-site and point-to-site connectivity for virtual networks in conjunction with ExpressRoute?
No. A virtual network connected to an ExpressRoute circuit cannot be used with site-to-site and point-to-site.
Regards,
Malar.

Access is denied error when launching HFM based Financial Reports

When attempting to run Financial Reports where the data source is an HFM application, users sometimes get the following error(s):
Access is denied
<BR>Access is denied
Sometimes the error is more detailed:
1001:datasourcename=HOLX;errorMsg=Access is Denied. <BR>Access is denied. (The more detailed error is followed by references to POV members display names and member names, etc.)
The error is intermittent and cannot be easily reproduced. Sometimes users get it for hours at a time, other times they can log out and log back in and run the report fine. The users are running the reports via Workspace.
We are running the following versions, and Web Logic is our application server.
HFM Server: 9.3.1.3
Workspace: 9.3.1.0
Financial Reports: 9.3.1.0
I did increased the JVM heap size allocation on the Reports server from:
-Xms512m
-Xmx1024m
to
-Xms768m
-Xmx1280m
That setting change appears to have made the issue not appear as frequently, but it is still occurring. I may have bandwidth to increase the heap size limits to 1024 and 1536.
Any advice and / or help would be appreciated! The fact that I cannot easily reproduce the error and the lack of references to it in the application logs are making it very frustrating!

We had gotten this exact same error with some users getting it, some not getting it, and other users getting it sometimes.
We were told it happened when a certain number of users are in HFM reports at the same time.
To fix it you need to do the following on the HFM production servers (Foundation/Core Servers, Application Servers, and Web Servers)
Apply registry changes to prod servers:
On the server click Start, click Run, type regedit, and then click OK
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Rpc
Click the Edit menu, point to New, and then click DWORD Value.
Type Server2003NegotiateDisable as the name of the new DWORD Value
Right-click Server2003NegotiateDisable, and then click Modify.
In the Value Data box, type 1, and then click OK.

"SCRIPT5: Access is denied" error when accessing web sites using LocalStorage

We are having an issue with Internet Explorer 10 affecting users on a number of our Windows 8 workstations. When a user visits a web site that uses the Local Storage feature of HTML5, the page is not displayed correctly. For example, if you visit this page:
http://jsfiddle.net/xFtQR/
You should see text in the grey boxes in the lower-right hand corner if everything is working. For the affected users, nothing is displayed. In addition, if you open the F12 Developer Tools and reload the page, the following error message is displayed: "SCRIPT5:
Access is denied.". It appears the LocalStorage feature is broken for these users.
From the troubleshooting I've done so far, I've determined that this issue does not affect the Local Administrator account on these computers, but it does affect any domain user and any new local user I create, whether the local user is in the Administrators
group or not. This leads me to believe the issue may be related to the default user profile in the image that was applied to these computers.
Other observations:
Performing a complete reset of Internet Explorer settings (from Tools > Internet Options... > Advanced) does not resolve the issue
These sites do work correctly after turning off Protected Mode for the Internet Zone (from Tools > Internet Options... > Security)
These sites also work correctly when InPrivate Browsing is turned on
I've tried using Process Monitor to determine whether access is being blocked to a folder. On a working computer, iexplore.exe creates a file within a folder at C:\Users\username\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore. I can't see
anything on an affected computer that would prevent IE from creating this folder, as the security settings on the folder all appear to be correct.
The location of this folder appears to be stored in the registry at HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. I've tried copying this key from a working computer and blanking
it out entirely to have IE recreate it, but neither resolved the issue. I've even gone as far as to try and compare an export of the registry from the default user profile from a working system and an affected system but I haven't been able to pinpoint any
differences which I thought might be relevant.
I've tried the "Internet Explorer Performance" and "Internet Explorer Safety" troubleshooters in the Control Panel.
Here are some links to articles on other sites which make reference to the same (or a similar) issue:
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/ie10-script5-access-is-denied/e87bdb30-7f2a-4510-bfa3-a22b995f777b
http://community.spiceworks.com/topic/357825-ie10-script5-access-is-denied
https://github.com/meteor/meteor/issues/1291
Unlike these other cases, deleting an affected user's profile does not resolve the issue (further bolstering my theory that the issue is due to an issue in the default profile in my case).
Thanks in advance for any assistance anyone can provide!

With some excellent detective work by Microsoft Product Support (thanks Siddarth!), the solution has been found.
It turns out that in addition to the security settings on a folder, there is an integrity setting. More information about it is
here.
The integrity setting on the AppData\LocalLow folder in each user's profile is supposed to be set to "Low" (hence the name, presumably). In our case, the integrity level was not set correctly on this folder. To rectify the problem, we will need
to run the following command under each user's profile (with a login script, for example):
icacls %userprofile%\Appdata\LocalLow /t /setintegritylevel (OI)(CI)L
As for how this incorrect setting was propagated in the first place, it is because the LocalLow folder in the C:\Users\Default\Appdata folder in our customized OS image had the wrong setting. The C:\Users\Default folder is the template for a new user profile,
so each new user on these computers was affected. I examined the C:\Users\Default\AppData folder on another machine without a customized user template and found the LocalLow folder is not present at all, so in our environment we will be deleting the C:\Users\Default\AppData\LocalLow
from each machine to prevent the issue from affecting future new users.
EDIT: If the command above does not resolve the issue, the registry key that points to the low integrity DOMStore folder may have been changed. Check the
CachePath registry value at HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. It should be
%USERPROFILE%\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore.

Deploy Windows Azure Virtual Machine UnauthorizedAccessException

Hi,
I intended to move my stored vm from the VMM Library to Azure, however I received the following error. Which account is VMM using to access my library?
Error:
    StatusCode: Microsoft.SystemCenter.CloudManager.Providers.ProviderException
    Error: The server failed to open file
\\Library\StoredVms\VM1\VM1.vhd: Access to the path is denied.
    StatusCode: System.UnauthorizedAccessException
Thanks for any advice
John
John

Hi John,
The Copy/Move job runs under the CloudManagerAzureProviderService. In my case this runs under a system account. I checked the share permissions -> added everyone Full Control and added Everyone RX to the security of the library folder.
I also made the service account local administrator but that did not help at first.
This solved my problem :-)
Hope it will fix yours as well
Greetings,
DJITS.

Access is denied Error while accessing WPC webpage

Hello,
I am getting following error while trying to access a web page created through Web Page Composer. I am able to access correctly if I assign WPC role to user but I don't want assign this to user as I want it to be read only for this user.
Please help.
#1.5 #0019B9E818EB006A0000009000000178000451E63DC00C48#1215949227398#com.sap.nw.wpc.runtime.ContainerComponent#sap.com/irj#com.sap.nw.wpc.runtime.ContainerComponent#employee1#9368##n/a##7cb0479050d011ddabce0019b9e818eb#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Plain###Error creating node Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry#
#1.5 #0019B9E818EB006A0000009100000178000451E63DC00ED2#1215949227398#com.sap.nw.wpc.runtime.AbstractDisplayComponent#sap.com/irj#com.sap.nw.wpc.runtime.AbstractDisplayComponent#employee1#9368##n/a##7cb0479050d011ddabce0019b9e818eb#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Java###Can not get node for component from the request, Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry
[EXCEPTION]
#1#com.sap.nw.wpc.runtime.WcmRuntimeException: Access is denied: com.sap.nw.wpc.runtime.DropTargetComponent - user: Johnson, Terry
     at com.sap.nw.wpc.runtime.ContainerComponent.getNodeForComponent(ContainerComponent.java:317)
     at com.sap.nw.wpc.runtime.AbstractDisplayComponent.doOnPOMReady(AbstractDisplayComponent.java:185)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
     at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
     at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:799)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
regards,
Jaish

Hi,
No WPC role should (not compulsory) be given to user if he / she wants to use web page created in WPC.
create a custom role, under which add a work set and add your web pages to this workset. thats it. and give this custom role to your user.
here is everything on WPC (creating wpc worksets, roles, showing them to end users) all... including video presentations...
Web Content Management: Web Page Composer in SAP NetWeaver Portal
hope this will solve your problem
regards,
Pradeep
Edited by: pradeep bondla on Jul 14, 2008 12:41 PM

(Access is denied) error

Could anyone please tell me why am I getting the error "C:\temp\Installation (Access is denied)".
I am trying to copy selected few files from source to destination.
public class filesMove
     public filesMove()
     void copyDirectory(File source, File destination) throws IOException
          System.out.println("source: "+source);
          //output: source: D:\fonts\xyz.PFB
          //output: source: D:\fonts\xyz.PFM
          System.out.println("destination:"+destination);
          //output: destination: C:\temp\Installation
          copyFile(source, destination);
     private void copyFile(File src, File dst) throws IOException
          InputStream in = new FileInputStream(src);
          OutputStream out = new FileOutputStream(dst);
          byte[] buf = new byte[1024];
          int len;
          while((len = in.read(buf)) > 0)
               out.write(buf, 0, len);
          in.close();
          out.close();
}

destination seems not to be the name of a file but of a directory. What you are trying to do seems to be writing the content of a file into a directory (and not into a file). This does not work.
You must first create a filename (using the name of your destination directory and the original file name).
Open the FileOutputStream on this file name and it should work.
One more thing, use a slash instead of a backslash in your file names. File names are Strings. And a backslash is an escape character. Using two backslashes does work but it gets confusing....

'Access is denied' error in ESS iViews & Page not displayed' thru. internet

Hi,
We are implementing <b>ESS(Webdynpro)/MSS(Java)</b>.
We are in EP6 SP13.
We want to put our portal on internet through SSL.
I have installed SAP Webdispatcher and configured it to support SSL. SAP webdispatcher is installed on a DMZ machine(hostname: SAPROUTER).
<i>webdispatcher ports:</i>
http port: 80
https port: 8443
1) When i try to access the portal from the DMZ machine (where the webdispatcher is installed) using <b>https://saprouter.domainname.net:8443/irj/portal</b>, i am able to see all the iViews.. but, i am getting '<b>access is denied</b>' error(in the status bar) when i try to click on any link in ESS iViews (for ex: working time, Employee search).. when i try to double click i am getting javascript:void(0)
2) When i try to access the portal through internet(<b>https://<ipaddress>:8443/irj/portal</b>), I get the logon page and after logging in... i am not able to see the ESS and Transaction iViews .. getting 'Page cannot be displayed' error.
When i am able to see the iViews in the DMZ machine.. why are they not being displayed when i access through internet??
Can any1 help me in this regard?? What am i missing ??
Awaiting your reply.
Regards,
SK.

Its a hot topic I think,
Where facing the exact same problems.
When we logon LOCAL to the Portal the iview works. (Not true the internet / DMZ)
But when we logon true the webdispatcher we get the Portal Layout, so the dispatcher works.
But the WEBdynpro Iview gives the error -> Page not displayed'
And when we edit the file hosts on the pc of the client browser and fill in the hostname of the SAP Portal the Iview works..???
There are no ports closed on the firewall, everything is allowed.
Can anyone tell me of its necessary to edit the Web Dynpro Runtime Environment. Here are some settings for the WEBdispatcher but I cant get it working.
-     sap.webdispatcher.host           = Defines the host of a used Web Dispatcher
-     sap.webdispatcher.port            = Defines the port of a used Web Dispatcher
-     sap.webdispatcher.protocol      = Defines the protocol of a used Web Dispatcher
See the link -> http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
When I activate the trace on the webdispatcher
(D:webdispsapwebdisp.exe pf=D:webdispsapwebdisp.pfl -t 2)
In the Tracefile I can see that the webdispatcher resolves the SAP portal system. Thats was aleady confirmed by seeing the portal framework from the client. I think that the WEBdynpros have to be remote activated, or some addition settings in the webdispatcher.
If somebody get an idée I really would like to know it.
Best regards,
Edwin

Windows Azure Virtual Network - Access is denied Error 0x80070005

Similar Messages

Maybe you are looking for