Windows Bootcamp no longer bootable
Hi,
I installed windows XP onto my MacBookPro about six months ago and everything was working fine. I haven't used it for a couple months. I decided I wanted to use Windows today and when I turned on my computer and held down the alt/option key, it didn't load anything (usually it displays "MACINTOSH HD" and "BOOTCAMP"), so I had to turn on my computer again and just use the apple. I repaired all disk permissions and verified the disk on the MACINTOSH HD volume and everything is okay. I can't do anything with the BOOTCAMP volume on disk utility.
I also went into System Preferences and Startup Disk, and it does not display the Bootcamp partition as a startup volume, only Macintosh HD and "network startup"
What has gone wrong and how can I get my Windows to function again?
Thank you.
I used to have XP on a MacBook Pro and experienced the same problem. My only solution was a Winclone backup that I used to replace the faulty XP. With Win 7 you can start from the install DVD and use system recovery to perform startup repair, system restore, and some other remedies. I do recall that this was not possible with an XP install disk.
If you do not have a replaceable backup then you will most likely have to reinstall from the start. Before doing this consider going to Windows 7 as XP is as obsolete as Mac OS 9.
Similar Messages
-
Windows partition no longer bootable
Last night, I was using Bootcamp fine through VMware Fusion, no issue at all. I shut the VM down correctly and closed VMware.
Later that evening, I was trying to copy files onto my iPad through iTunes and got the warning that I didn't have permissions to view the contents of that file – I checked file info, I do, and also transferred the same file to my iPhone no more than 5 minutes prior.
Just in case, I booted into the recovery partition on 10.9.2 and ran permission and disk checks. When verifying the entire disk however, I got the error "The partition map needs to be repaired because there's a problem with the EFI system partition's file system".
A repair couldn't be done on the live disk so I booted back into OS X and created a recovery USB. From this, I ran the repairs to the entire disk, and repaired the permissions and disk for my Mac HD partition, and then checked the disk again in the recovery partition and whilst in OS X – the error is no longer registering.
From here – I no longer have access to Bootcamp (natively, or via VMware). The partition is mounting in Finder, and viewable in Disk Utility. It even appears in the "Startup Disk" pref pane, however, selecting the partition here just results in a blank screen on boot.
Before I booted into the recovery partition using the "alt" key, the Windows parition was there. Since that error, it's no longer available.
I've not resized the partition, nor have I changed any disk sizes.
I did, however, run the following commands following the iTunes issue in an attempt to correct:
sudo chmod a+rx /volumes/*
sudo chflags 0 /volumes/*
I understand I can probably remove the partition and start again, but that defeats the point. Surely there must be a fix through command line or something?
I'm not a computer novice, but this field is a whole new ballpark for me. I'm googling for answers, but they may as well be in another language – the common notions seem to be a broken GPT or MBR/GPT out of sync.
Below are the results of various terminal commands – maybe someone could analyze and point me in the right direction?
Kind regards and thanks in advance,
Jamie
// sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: disk0: PMBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 977105059
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 876953152 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
877362792 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
878632328 632
878632960 97755136 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976388096 716931
977105027 32 Sec GPT table
977105059 1 Sec GPT header
// sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 977105059]
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
// diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 449.0 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data Windows HD 50.1 GB disk0s4Hi, me again.
When you found the setupact.log file (from the other thread) did you do a search for "detected boot environment"? -
Bootcamp no longer bootable after adding and deleting partitions
I am using a 2014 Macbook Pro with OSX 10.9.5
I was trying to add a partition to install Ubuntu on and after adding and deleting partitions, my bootcamp partition will no longer boot whether I use rEFIt or bootcamp assistant or normal osx boot menu.
Judging from the information I got from similar threads on this I think this information will be useful
Last login: Thu Apr 9 12:05:32 on ttys000
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Malformed MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 490234751
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 285122688 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
285532328 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
286801864 7847992
294649856 195584000 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856 863
490234719 32 Sec GPT table
490234751 1 Sec GPT header
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 1023 254 63 [ 1 - 294649855] <Unknown ID>
2: 07 1023 254 63 - 1023 254 63 [ 294649856 - 195584000] HPFS/QNX/AUX
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
*4: 07 0 0 0 - 0 0 0 [ 0 - 0] HPFS/QNX/AUX
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$
It wasnt like this before. Before 3 and 4 had some of the same values from above instead of all 0s. After trying to take advice from threads with similar problems and entering stuff into the command line it became like this. I think I might have messed thing up while looking for a quick fix.
Can anyone help me with this? Thanks.I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e. -
Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?
If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary? -
Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune
Mac OS X 10.7.5
I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
Here is the information from the Partition Inspector:
*** Report for internal hard disk ***
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 1151635239 Mac OS X HFS+
3 1151635456 1152904991 Mac OS X Boot
Current MBR partition table:
# A Start LBA End LBA Type
1 1 409639 ee EFI Protective
2 409640 1151635239 af Mac OS X HFS+
3 1151635456 1152904991 ab Mac OS X Boot
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 1151635456:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X BootHi Eric,
Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
The following information is available:
Mount Point: Not mounted
Format: Windows NT File System (NTFS)
Owners Enabled: -
Number of Folders: -
Capacity: 274.55 GB
Available: -
Used: -
Number of Files: -
What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
Should I clone the hard drive in the target disk mode??
I'm not the best at this stuff so any more advice would be greatly appreciated!
Thanks! -
Unable to install windows bootcamp
I have new macbook pro rentina display 15" (MacBookPro11,3), tried to install windows 8 through bootcamp, got stuck at 40% windows copying files, internet searching showed i should wait, i waited for around 3 hours on high speed internet but nothing happened. (tired like 4-5 times same result)
Cancelled it, installed just drivers and checked install windows, bootcamp detected the usb drive as bootable and windows installed but at last gave error, boot file configuration missing use usb or cd to repair, cant do anything forcefully restarted and on boot same.
by ALT on boot got in mac deleted now dont know what to do, whats wrong with bootcamp
Plz helpThese r the results of commands you
Vazeers-MacBook-Pro:~ vazeer$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 396.4 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 103.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *396.1 GB disk1
Logical Volume on disk0s2
24E03077-3356-4196-BB91-B1BD30D1C660
Unlocked Encrypted
Vazeers-MacBook-Pro:~ vazeer$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group F3E8D0A9-F2F7-4D60-9705-CDE53C1E5CAC
=========================================================
Name: Macintosh HD
Status: Online
Size: 396417986560 B (396.4 GB)
Free Space: 10645504 B (10.6 MB)
|
+-< Physical Volume FFD4547C-88F1-4FCD-9F95-F56001C4AA80
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 396417986560 B (396.4 GB)
|
+-> Logical Volume Family 6DCDD598-3667-4CA7-AABE-E08D9D5FB9DC
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 24E03077-3356-4196-BB91-B1BD30D1C660
Disk: disk1
Status: Online
Size (Total): 396055019520 B (396.1 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
Vazeers-MacBook-Pro:~ vazeer$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 977105059
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 774253880 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
774663520 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
775933056 896
775933952 201170944 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896 131
977105027 32 Sec GPT table
977105059 1 Sec GPT header
Vazeers-MacBook-Pro:~ vazeer$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [ 409640 - 774253880] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 774663520 - 1269536] Darwin Boot
4: 0B 1023 254 63 - 1023 254 63 [ 775933952 - 201170944] Win95 FAT-32
Vazeers-MacBook-Pro:~ vazeer$
What should i do next ? -
How do I share Mac music and photo files when in Windows Bootcamp mode?
I have a new iMac with a terabyte of storage that includes about 30 gigs each of iTunes music and jpg photos. I need to share them to the Windows Bootcamp environment so I can wirelessly stream to them to a DLink DSM 320 media server connected to an AV system located in another room. When in Bootcamp Windows the the 320 can "see" the Windows machine but cannot find any media.
So the question is, how do I share files between Mac and Windows when in Windows Bootcamp?
A better solution would be to directly connect the Dlink when in the Mac environment but I have not been able to find software to do that (the Dlink product is for PC only.) If anyone knows of such software that would be great too.Windows needs third party software to see files on the MAC OS extended FS. I've heard MacDrive does this.
-
Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.
-
Creative Cloud on Mac OSX and Windows Bootcamp on the same machine.
Hello,
I am looking into getting 3DStudio Max which is a Windows only program but will need to flip flop between 3DSM and Photoshop. I am wondering, can I install my Adobe apps on both Operating Systems so that I can have them on my regular Mac OSX for normal work and in Windows Bootcamp for when I do 3D renderings? I rather not use a Virtual Machine considering both of those programs are going to take a lot of RAM already. Adding another program to that mix I feel will just overheat/slow down my machine.
Thank you for your thoughts and time,
Sarahthat's interesting. it may be a problem, but give it a try.
just open your bootcamp windows, navigate to https://creative.adobe.com/ and start downloading ps. a cc desktop app will download to your bootcamp windows and hopefully you ps will work on your bootcamp windows. i don't see any reason why it would stop working your mac, but that will count as your two installations so you will not be able to install on another computer. -
My backup drive is no longer bootable after TimeMachine backup to it. Why?
When I purchased a Lacie Porche 350 GB Firewire drive, I partitioned it properly via Disk Utilities and backed up my entire Hard drive using SilverKeeper to one of the two drives created by partitioning, resulting in an OS 10.4.10 Tiger bootable drive. Which I tested and it booted up perfectly. The day prior to upgrading to Leopard OS, I used SilverKeeper to back up everything on my hard drive again, since there were a lot of system software, security, also software programs and utilty updates on board since mm initial backup. Afterwards, I checked out the bootability of my back up drive (partition), which again worked perfectly.
After installing Leopard, TimeMachine recognized and asked if I wanted it to back up my hard drive (with Leopard O)S to the same (it recognized) named backup drive (partition) and I clicked yes. TM's backup of my entire hard drive went quickly and without a hitch. I knew TM's backup was not a bootable type, but figured that I still had a bootable Tiger system on the same drive if I needed to use that in an emergency and decided to test that out again.
Was wrong! Previously bootable drive no longer showed up in Startup Disk to select from in System Preferences. Thus no longer bootable! I now have 2 full backups of my entire hard drive (one with Tiger, the other with Leopard) on the one external drive, neither are bootable. Guess I can boot up from the installer DVD in emergency, but that wasn't the reason why I made a bootable backup drive to begin with.
Don't know if and what TM did that rendered the formerly bootable drive unbootable. Did nothing to change the previously working bootable drive. Anyone else have similar experience after running TM? Idea of cause? Suggestions, or work-a-round? Is this a known issue, or should this be sent to Apple's Feedback?
Thank you kindly,
superushThe TimeMachine backups were made to the same bootable clone partition that the Tiger bootable clone is on mentioned in my original post. The bootable clone was backed up there via SilverKeeper, which is included in the software that came with the 350 GB ,LaCie Porche external firewire drive.
Am now thinking that perhaps that version of SilverKeeper, which was recognized by my OS Tiger, may not be recognized by Leopard OS, and when used TM to make backup to same partition cloned bootable drive, that may have made my bootable SilverKeeper backup clone null and void.
Could that be the possibility?
Best regards,
superush -
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works.
The touch screen on my nearly brand new Pavillion lap top running windows 8 no longer works. Cant use calibration tools as there's no response to touch. No option in control panal to turn on or off touch capability. I have no computer background so cant really get to technical. Is something simple turned on or off located in some mysterious place? F key or something? Bad machine? Thanks for any input. Sarah
http://www8.hp.com/au/en/drivers.html
I found the driver at the above link. I installed the driver, disabled my graphics card and rebooted. The touchscreen worked. Then I enabled the graphics card. So far so good. Hope I dont have to do this routine too often.
Good luck with it. -
Windows 7 no longer recognizes or allows ASIO drivers for my usb audio interfaces
Hello All, last year I purchased a new version of Propellerheads Reason and the Balance digital audio interface that came with the bundle.
Everything was fine it all worked well, especially when I added asio4all drivers. (The Balance comes with its own asio driver).
Super low latency on my keyboard and midi guitar. I was using my midi guitar and set up at jams for several months last year and it was great!
One day I was getting ready for the jam session and I noticed that the latency on my midi guitar became so bad that I could not play in time with the other musicians.
I checked out the preference/audio page in Reason and saw that my asio drivers were missing! I immediately went and down loaded asio4all again and installed it. It would show up in any of my music software. I have tried removing and re-installing
the stock ASIO driver that came with Balance and no luck.
I suspect that shortly before this huge problem ( my music software is basically useless without asio drivers) I allowed a windows update to my system.
I think that somehow during one of these "updates" something changed and windows 7 no longer allows asio drivers on my computer. This really sucks!
Is there some way to get rid of the offending "update" that ruined my music system?
Thanks in advance!
DonThank you for your response FangZhou Chen, unfortunately this problem started last fast, possible early November so I can't do a restore that far back.
my best,
Don -
Windows Machines No Longer connecting to Shares
Has anyone experienced issues with their Windows machines no longer connecting to Shares on the server. I have a Windows 7 machine and a Windows XP machine that were connecting to the Shares without any issue. Then this morning they just stopped connecting. I can ping the server both through its name and through its IP address from those computers but when trying to map a network drive all I am told they cannot find the server to connect. I have set all the appropriate security settings on both machines as suggested in numerous articles. SMB is turned on for the server.
I have made no changes to the server in the last 24 hours other than to turn off file-sharing and turn it back on to address an issue with Time Machine backups not occuring due to image being locked in use.i have a vaguely similar issue, where my server is a member of the domain(workgroup on mac) - suddenly no users from the domain show in users panel,
and connections are not accepted... 10.8.3/server 2.2.1 -
Windows 7 No Longer Recognizes The .zfsendtotarget File Extension
My Windows 7 no longer recognizes the .zfsendtotarget file extension as of a few days ago. I don't know what happened or how to fix it other than possibly going back to an earlier point, which I cannot do due to all the progress, which will be lost.
Besides, there must be a more intelligent course of action.Hi DJjarak,
I just write to check your issue's status. Did it resolve?
Karen Hu
TechNet Community Support -
Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom
Maybe you are looking for
-
Meeting invites no longer show in the notifications pane of iCal
I have been using Snow Leopard since it was released to the public and after a recent update I noticed that I could never see the Exchange meeting invites in the notifications pane. When I looked closer I saw that all the meeting invites were automat
-
Monitor setup for film sound-edit
Hi freaks, My monitor setup is 3 Bm5a's and a Bm9 sub. The movie will be mixed LCR, not surround. In the (Logic 8) prefs/audio/surround i've got it set to 5.1 with the L monitor on output 1, R on out-2 and C on out-8 of the digi 003 in my studio. Out
-
I can't open the JAVA webstart in WinXP (JSDK1.5.0beta2)
When I click in javaws.exe the program opens the "Java application cache viewer" but does not load the Java Web Start. Someone know if it is a know bug or if is just of my own system?
-
Sequence Processing Render Quality: BEST
What exactly does putting sequence processing render quality into BEST accomplish, other than to make it take longer to render things? Does it actually result in a cleaner picture? If so, why wouldn't you ALWAYS render in BEST quality instead of GOOD
-
Problem opening old Photoshop Files
I am in CS6, OSx 10.8.3. I have some old photoshop files, tif, psd, jog, etc. on a CD. When I try to open them, I get an error-108 and the file disappears from the finder. I have tried to copy to the hard drive, but I get an operation cant be complet