Windows Boots to Black Screen w/Blinking white cursor, and then...

I installed a new OCZ sata II SSD in my iMac 27' mid-2010. I bought the cables and pressure wall from an AASP, so it's all Apple in there except for the OCZ drive. The 2TB internal drive (factory) is in there, too.
Installed SL to the SSD and updated to 10.6.8 and man, does this machine fly now!
So I used Boot Camp to create a windows partition, 40GB on the SSD, then went through the WIndows 7 install process. My WIndows disc is a retail copy - totally legit.
So the installer finishes, and I used the disc that came with the iMac to install the Boot Camp drivers (vs 3.1)
Then Windows restarts and - fail
Black screen with blinking white cursor. Tried the command fixes to the MBR - no joy.
Here is the weird thing: if I put the Windows installer in the optical drive, then boot to the Startup Disk Manager (holding down option at power up) I can select the installer dvd, and when the prompt comes up "Press any key to boot from CD/DVD" if I just leave it for a moment, the operating system boots from the SSD.
Weird. But, thats what I've been doing as a workaround. That and using Fusion to reach over to the Boot Camp partition and run it as a virtual machine (which works just fine).
Anybody know how to fix this?
Thanks!
Jason

I FOUND My answer.
I opened the iMac back up and swapped the SATA data cables so that the cable designated for the factory installed internal HD led to my self-installed SSD - now it works as it should.
No errors on the internal HD either.
I beleive that EFI looks for the Windows MBR to be on the 1st drive bay. If I had modified my system by patching the MBR or EFI somehow I guess I could have got it to work, but as it is the cables reached and all is well.
As an aside, I came to this deduction when I removed the internal HD from the iMac and tried to boot from the SSD WIN7 partition and still could not. Then I took the same SSD out and popped it into my MBPro and it worked. My guess was that somehow the presence of another internal HD of any kind was confusing the boot loader, but I now believe it is the drive bay designation.
Hope this helps someone else who has added a SSD to their single drive iMac mid-2010

Similar Messages

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

Windows 8 .1 black screen after login with cursor

after login in pc i get a black screen and a cursor i can do nothing please help me i updated windows 8 to windows 8.1.

HI , Welcome to the HP Forums! It is a grand place to find answers and information! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More How Do I Find My Model Number or Product Number? I grasp that you have a HP 15 notebook and you recently upgraded from Windows 8. to 8.1. Now after you enter your Windows password you get a black screen with a cursor. Here is a link to HP PCs - Black or blank screen with blinking cursor after entering Windows password. To say thanks for responding please click the thumbs up icon below. If this solved your difficulty please tell people by selecting solution provided. Best of Luck!

HT5858 I have had difficulty launching sites from within my email messages. So, in trying to revert to the default settings on my iPad I went into "Settings" and reset everything. Now, I have a black screen with a white apple and a white line! What do

For the last severl weeks I have had difficulty launching sites from within my email messages. Thinking that I may have gone into "Settings" and set something wrong, I decided to reset to the default settings. So, in "Settings" I chose reset everything. Now, when I turn my iPad on all I get is a black screen with the picture of a white apple and a white line below it. Nothing else works. What can I do? Do I need to send this back to Apple to be restored?

You will hopefully be able to restore it yourself. It sounds like you erased all constant and settings rather than resetting all settings. But I'm basing my theory on the fact that you are seeing the Apple logo with the white progress bar (the white line) on the screen. That's what you would see if the software was being reinstalled and then it stopped on you. If that is what happened, you need to restore again and most likely need to use recovery mode.
You can read about recovery mode here.
Recovery mode - Apple
However ...... If you are seeing the white line when you turn the iPad, let it go for twenty minutes or so, before you try restoring again. There is possibility that the software is still be installed and it can take a while before you see that white line move at all indicating that progress is being made.
Frankly, I don't think that the software is still being installed, but since you didn't say specifically how long the iPad has been like this, it could just be that the software hasn't finished installing yet. If you know better - meaning that it's been like this for hours or longer, then you do need to restore the device.

Black Screen with a live cursor and Please Wait Freeze

So after having my computer remove internet functionality when I did some HP updates I System restored back before them fixing the issue. Now though, it continues to give me Please Wait then freezes for about 6-8 minutes, and it will finally go to the log in screen but after sliding the main image and screen back to get to the log in it gives me Please wait for another 6-8 minutes. Once I get to the log in screen it freezes momentarly and then it allows me to log in. After clicking submit or enter it will freeze on Welcome for a long while, the time is not consistent, and once it gets to the desktop it is black, the pixels are live but just not changing. The cursor is also live and working but there is nothing to click. The windows buttons do not work to get to the tiles with everything on it. I have tried to restart it about 7-8 times but it just continues to freeze. After about 30 minutes of being on black screen the desktop bar loaded but it isn't loading fully. CRT, ALT, DLT, works but Task Manager doesn't load. If I relock it restarts the black screen process. Anyone know how to fix this?

Hi,
Have you tried running a hard drive test on the computer?
To run the Hard drive diagnostics you need to Tap Esc as soon as you Power on the notebook. It'll show you the Startup menu. Select F2 and run hard drive quick test and let me know what happens..
Testing using HP PC Hardware Diagnostics : Testing using HP PC Hardware Diagnostics (UEFI)
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Late 2008 MacBook Pro won't boot; only gray screen with Apple, spinning gear, and then the mouse pointer.

Thanks to all in advance! Okay, last night I was trying to encrypt a Time Machine BackUp disk (Seagate 500GB Back Up Plus) and a dialog box popped up and said "POSIX could not..." And then whatever was next. So I unplugged the drive, plugged it back in, and the files still showed up, so I was like "oh okay so it's not screwed up." The next I try and boot my MacBook Pro, and of course it doesn't. The gray screen comes up, the logo shows up, the gear is spinnin, the it goes away and the mouse shows up. But that's where it stops. And sits. And sits. And sits. So I force it to shut down. I run through this many more times, as well as attempting the Recovery Mode, Safe Boot, and to no surprise, it doesn't work. So I go grab my trusty Snow Leopard disc, pop it in, ctrl-C on start up and it loads. So I select the option of restoring from a Time Machine backup and plug in the external drive only to not see it in the list. So I go to Disk Utility, and find out that the entire external drive has been erased and renamed disk8s2. So I go to my internal drive, but it shows how much has been used and it matches to how much as of last night. So I tried repairing the disk and restarting and of course it doesn't work. So now I don't know what to do. Really I'll take any suggestions besides buying anything (I'm only a 16 year old guy haha). So yeah. Thanks!

The encryption never actually followed through.
You started it, though. That makes the volume inaccessible to any OS X version before 10.7.

Macbook Pro boot shows black screen with white text cursor

Hello,
I have a MacBook Pro 7,1 MC374xx/A running Mavericks. My box has two internal hard drives in it. One had the Mac OS installed to it, and the other has absolutely nothing on it. I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on. I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart. Then it said, "No boot devices found." Now for whatever reason, it's just a black screen with a white text cursor.
What the heck happened?
I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS). Then, I completely erased everything from the drive with Boot Camp on it. But still..black screen with white text cursor.
I have no Time Machine backups available so I'm forced to reinstall the OS. Any idea why this happened? It seems I must have attempted to install Boot Camp improperly. Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
Earnestly,
Speck

Boot Camp- Windows installation boots to black screen with blinking cursor.

HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

GS70 - Does not boot - black screen with solid white dash

Sorry for the long post - I've been beating my head against this problem all day, filed a report ticket and really need help from anyone who has ideas.
Yesterday evening after finally relenting and allowing the patch Tuesday updates to install on my GS70 Stealth I tried to power on my computer and it remained stuck at the MSI logo. I waited 3 hours with no success before powering it off and attempting to access the bios by hitting the delete button. The screen turned black except for one non-blinking white dash near the center of the screen. This screen also remains indefinitely and requires a hardware power off to work. I've tried all of the function key presses and recovery shortcuts to no avail.
Eventually I tried to boot into linux via a live USB. I still could not access the bios but, to my surprise, so long as this USB is in my system, Windows happily boots. After this I tried to revert to a system restore point before the updates but that did not resolve the problem. I also tried to update the BIOS but there is no way to install BIOS updates that I know of that doesn't require accessing the old BIOS first (which I cannot do because the black screen with a white dash is still all that shows up). I tried forcing the UEFI bios to load through windows recovery settings with no luck either.
I've sent in an RMA/Support request and hopefully MSI will repair or replace my device but I sent it in for an RMA literally less than two months ago and to be having to do it again so soon is starting to turn me off of the product. For me to insure and ship my device to MSI costs a little over $100 each time which is rapidly turning this $1600 product into an $1800 one and turning me from an MSI brand loyalist to a 'one-star-review everywhere' evangelist. Is it possible that something MSI did during the last RMA screwed up my motherboard (they replaced the disfunctional steel series keyboard with a new marginally more functional steel series keyboard)? Does MSI ever cover the shipping costs for an RMA if the RMA is a result of damage that they caused to the device? Is there anything I should do to try to avoid burning more money trying to get a luxury-priced product I've already paid for to function?

i had similar problem myself on my first GS70 it has some sort of bios problem that it random hangs itself :/ causes OS not to boot and bios refuses to load but i managed to get my recovery USB to boot but not bios yet so i sent laptop off for repair they replaced the motherboard so i got it back then i had an faulty gpu :/ so i took it back and got money back so i bought new one some where else since than i havent had problem so this sort of problem sounds like bios firmware isnt booting propertly :/ so have you tried removing msata and HDD from laptop and then power laptop on? to see if bios gets forced on if so power it off put msata back on and so then power laptop back on and bios shall work again

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

Windows 8.1 installation: Black screen with blinking cursor

Hi!
Trying to install Windows 8.1 on my MacBook Pro. Worked fine last time I tried. Now, however, using the same DVD, after `Press any key to boot to CD or DVD...`, I'm taken straight to a black screen with a blinking cursor and nothing is happening.
I've seen similar cases, ie. Black screen with only mouse cursor on it - Windows 7 instalation Solved - Windows 7 Help Forums - but they usually occur after the installation welcome screens etc., or after the install itself has succeeded.
I just ran `fsck` and found no errors.
Thanks!

Hi!
Trying to install Windows 8.1 on my MacBook Pro. Worked fine last time I tried. Now, however, using the same DVD, after `Press any key to boot to CD or DVD...`, I'm taken straight to a black screen with a blinking cursor and nothing is happening.
I've seen similar cases, ie. Black screen with only mouse cursor on it - Windows 7 instalation Solved - Windows 7 Help Forums - but they usually occur after the installation welcome screens etc., or after the install itself has succeeded.
I just ran `fsck` and found no errors.
Thanks!

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

Windows not loading properly in boot camp, black screen

Hi guys,
having problems with bootcamp, running the latest version under snow leopard on an intel mac mini
i bought a copy of XP on ebay, to my dismay, what i actually got in the post was a recovery disk for a dell laptop, and a product key. Although probably illegal to sell to me, it was able to install over the top of my windows 2000 install i did with Parallels. installing to bootcamp as the disk drive is named with a different letter each time i start the virtual machine, causing havoc with games that require the cd to be in the drive, and not knowing where to look for the disc.
I partitioned the drive, and installed windows. once that had finished, it rebooted automatically. but now, whenever i boot up windows under botcamp, i am presented with a black screen with a flashing cursor. i cannot type anything, or bypass it. if the xp disk is in the drive, it says press any key to boot windows from the cd, but pressing any key does not result in anything happening, and so i have to hold the power button down to do an emergency restart.
does anyone know where i might have gone wrong?

solved, by using a windows service pack 2 cd, instead of service pack 3. not sure why the later service pack would not install properly

Black screen w/blinking cursor hp dv6700 please help me out someone!!

My dv6700 running vista 32 bit has shut down on me and when i try to start it I get the first HP screen and then get stuck on a black screen with blinking cursor.....so i can't get to the next screen to press F8.....I went to this page to download iso file to make a recovery cd http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&DwnldID=15074 and then used IMGBURN program to burn iso to cd....then put the burned cd into my HP cd drive and started it up but still to the black screen with blinking cursor.....then got into my bios screen on the next try to change boot order to start with cd drive but same thing...black screen blinking cursor.....I really hope someone can help me out here.......I've never posted on any forum ever...always googled everything myself cause i wasn't sure if i'd actually get a response on a forum....so i'm hoping i've been wrong this hole time......

Hi,
I don't think the ISO you downloaded will provide the necessary repair options you need to try, so I'd suggest first creating a retail Vista installation disc and using the repair options this provides. A full description of creating the disc ( including links to the Vista Image downloads ) can be found on the following link.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
Once created, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp 8560w booting into black screen, seems to be booting without display

Hi,
Ive got this elitebook 8650w from a friend who asked me to help him try to get it to run.
First thing noticable that something was wrong with this machine is when it started shutting down/rebooting randomly, i suspected overheating since it hadnt been cleaned and doing these shutdowns while it was running 3d games.
I told my friend he had to get it cleaned or it could sustain damage.
The next day the system started to reboot right after it completed windows logon, getting into a loop.
I suspected the temprature failsafe was doing this, because after the system did one cold start,it would boot to windows,reboot on its own and then wouldnt get through the boot process alltogether and just showed a black screen with the cooling fan running at top speed, capslock blinking.
It wasnt even showing the hp bios startup screen anymore.
I tried hooking up a monitor to the external vga, but the monitor goes into standy and remains black.
I know it did boot onto windows eventhough it was showing a blackscreen because i could type in the logon password, wait a bit and then shutdown the system with pressing alt-f4, enter.
clearly the system boots but just the display isnt working. but it isnt giving off any beeps or showing anything on boot.
So i took out the cooling parts and cleaned it to redo the thermal paste.
the job had previously been done by hp, and turned out to be done very very poorly,   half the GPU didnt even have thermal paste onit, a big airbubble prevented contact for more then 2/4th of the gpu surface.
i feared a burnout, but the surface didnt show discoloration and it had been working like this since he got it.
Eventhough it was a poor job done, it didnt seem to be burnt and the temperature failsafe just saved it from burning out.
After thouroughly cleaning the big blobs of paste hp put there most of it ending up next to the gpu and cpu instead of onit,blobs big enough to cover atleast 4 of the same type gpu's/cpu's
I redid the thermal paste using arctic silver number 5, the way it should be done and then reinstalled the blocks and heatpipes.
It all went smoothly into place and i reassembled the parts taken off the laptop.
Confident i rebooted, nothing changed and the problem persisted, it seems to be booting, but the screen doesnt display a thing, and stays completely black.
Shining a light onto the screen doesnt reveal any unlit graphics due to a broken backlight or anything.
Since it went through this loop often and me and my friend have been pressing keys to see if it would boot into a bios screen or anything i suspected the bios might have gotten screwed up, so i decided to try and restore default bios.
But how to do that without a screen?   i tried locating a bios jumper to do this but didnt find any.
Then i found a text the hp forom saying i could force factory setting by pressing f10 repeatedly 5x times during startup, then f5 for default and then f10 to safe and exit,enter.
I did try that a couple of times, but the machine doesnt reboot as it should when you safe an exit bios, s i dont even know if i get into bios in reality.
Now ive come across a few known problems with this machine in my forumcrawling.
2 problems wich results in the same behaviour are : 1 a faulty mobo and 2 a faulty board for the webcam behind the top of the display somehow preventing the screen to work properly.
So , dear hp support -  are there any known problems and sulotions to them other then, drain power and boot again?
If this machine did appear on the market with some of em having a faulty mobo, like some mssges say, why is that not on the official forum, and could i be dealing with such a machine, how do i find out?
If im dealing with a broken display, could that have been caused by a videocard overheating?
You can help me by telling me:
-Can i force bios default without having an active screen? if so, how? just pulling the battery and draining power didnt change a thing.
-Can i find out if GPU is broken (the system does seem to boot in the dark on a cold start)
-Can i find out if the display is broken by blinking messages or someting?
-Are there other known problems with this machine that give these failures as a result?
Can it be theres a broken inverter for the backlight? i geuss not, the vga port would be working then.
hopefull for an answer,
A friend's computer fixer.

I brought it into the Apple Store and I was completely denied of the 8600m GT recall. I am not paying $800 for a **** logic board replacement! Seriously, what the ****!?
I find this problem just as bad as the 8600m GT failures because this isn't the only forum I've been too that have people complaining about the same thing.
I don't know what to do anymore. Money doesn't grow on trees and I need a working laptop for school.
If anyone has any other suggestions please don't hesitate to let us know here.
Good luck to the rest of you!

Windows Boots to Black Screen w/Blinking white cursor, and then...

Similar Messages

Maybe you are looking for