Windows BSOD - IRQL_NOT_LESS_OR_EQUAL and UNEXPECTED_KERNEL_MODE_TRAP

Having a bunch of issues with my pc.. i ve built this a while ago (1.5 years ago-ish). 
Recently one of my ssd failed (i had win installed on it). I couldn't install windows successfully on my second ssd because the installation process kept failing.. turns out one of the RAM sticks must ve been corrupt. After I singled out which one it was,
it all went fine..
Now my win has been running just fine for a day but I started getting BSOD's when in a game or running a video. 
Most of the time it gives the error IRQL_NOT_LESS_OR_EQUAL, and one time it gave the UNEXPECTED_KERNEL_MODE_TRAP error.
I did 3 mem tests; my 3 remaining RAM sticks seem to be fine from the memtests' perspective.
I used FurMark GPU Stress Test to see if the video card is one at fault, and got no BSOD as it was pushed to the limit.
The only other things I can think of are PSU and mainboard ?
And here are logs from the event viewer:
Critical Error:
Log Name:      System
Source:        Microsoft-Windows-Kernel-Power
Date:          3/4/2015 4:48:31 PM
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      mihaipc
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
    <EventID>41</EventID>
    <Version>3</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000002</Keywords>
    <TimeCreated SystemTime="2015-03-04T23:48:31.358245100Z" />
    <EventRecordID>1138</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>mihaipc</Computer>
    <Security UserID="S-1-5-18" />
  </System>
  <EventData>
    <Data Name="BugcheckCode">10</Data>
    <Data Name="BugcheckParameter1">0x49</Data>
    <Data Name="BugcheckParameter2">0x2</Data>
    <Data Name="BugcheckParameter3">0x1</Data>
    <Data Name="BugcheckParameter4">0xfffff8025e704e86</Data>
    <Data Name="SleepInProgress">0</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
    <Data Name="BootAppStatus">0</Data>
  </EventData>
</Event>
Another Error:
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          3/4/2015 4:48:55 PM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mihaipc
Description:
The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000000a (0x0000000000000049, 0x0000000000000002, 0x0000000000000001, 0xfffff8025e704e86). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 030415-24484-02.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-04T23:48:55.000000000Z" />
    <EventRecordID>1152</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>mihaipc</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="param1">0x0000000a (0x0000000000000049, 0x0000000000000002, 0x0000000000000001, 0xfffff8025e704e86)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">030415-24484-02</Data>
  </EventData>
</Event>
And another Error:
Log Name:      System
Source:        Service Control Manager
Date:          3/4/2015 4:49:06 PM
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mihaipc
Description:
The Service KMSELDI service terminated unexpectedly.  It has done this 1 time(s).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7034</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-04T23:49:06.730929500Z" />
    <EventRecordID>1155</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="1792" />
    <Channel>System</Channel>
    <Computer>mihaipc</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="param1">Service KMSELDI</Data>
    <Data Name="param2">1</Data>
    <Binary>530065007200760069006300650020004B004D00530045004C00440049000000</Binary>
  </EventData>
</Event>
Thanks,
Mihai

These crashes were related to memory corruption (probably caused by a driver). 
Please run these two tests to verify your memory and find which driver is causing the problem.  Please run verifier first.  You do not need to run memtest yet unless you want to.
If you are over-clocking anything reset to default before running these tests.
In other words STOP!!!  
If you do not know what this means you probably are not
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • Interesting problem with RAID, Windows 2008 server, and Ubuntu

    sooooo, i got the system working and linux loved it.  just adored it.
    however, Windows did not.  Windwos 2008 server hard locks from time to time.  i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
    However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
    Ubuntu 9.04 server, however, just took it and made it work great.
    I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.  Then i went back and redid the raid, and it did the original error.
    I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk.   While it installed fine, it gave me an IRQL_not_less_than_or_equal error.  It boots in safe mode, but no where else.  I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.  I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
    My settings are as follows:
    SATA Controller 0-5 enabled
    NVRAID- enabled
    PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
    MAC LAN- same as above
    MAC LAN1- has master disabled, but the other stuff is the same
    Serial port A is on AUTO, B is disabled, and floppy is disabled.
    Option Rom is PFA relocation.
    Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy.  I just want to fix it
    lastly, my LSI PCI-E scsi adapter is not being seen at ALL. 
    thanks guys.

    Quote
    Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy.  I just want to fix it
    lastly, my LSI PCI-E scsi adapter is not being seen at ALL. 
    Turn off onboard raid ctrl 1st. There are conflicting.
    Quote
    I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
    Known issue, partition mess:
    http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
    Quote
    I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk.   While it installed fine, it gave me an IRQL_not_less_than_or_equal error.  It boots in safe mode, but no where else.  I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
    What's the BSOD error? Are you using XP installation disk with included SP3?

  • GT70 BSODs 9F and x116

    Hello,
    Good Morning/Night,
    I have a laptop, MSI GT70 with the following specs:
    Windows 7 Ultimate 64x
    Intel Core i7 3660QM
    NVIDIA GTX 675M
    12GB RAM
    And the following problem:
    A few months ago, my notebook started to show some strange BSODs, at the beginning they ware rare and only rebooted with no further issue, then after some time, Windows displayed my GPU as Standard VGA Driver with a "caution" icon, and suddenly unninstal the nvidia driver. I tried a lot of solutions on the web:
    -Clean OS install with default drivers.
    -Computer cleanup
    -Updated Drivers
    -expand nvlldksm.sys (sorry i don't remember the exact name)
    -etc (i don't remember everything i did)
    Nowadays i have this problem: When my computer stays turned off for a few time and i turn on, windows recognizes normally the GPU, BUT when i try to play a game, it runs for 5-10 minutes and then freezes with a BSOD, normally 0x116 (95% of the time) and when it reboots, something strange happens, it freezes before windows logo or freezes on "Welcome" screen, so i reboot in safe mode, and the GPU is still showing in Device Manager, but without loading its drivers. Then i reboot again, and when windows succesfully reboots the GPU is shown as "Standard VGA Graphics Adapter" with a yellow triangle in it.
    I really don't know what to do. MY CONCLUSIONS:
    -Something with the driver (because the problem occurs when the driver is loading or is fully loaded)
    -The hardware seems to be fine: in some rare occasions i was able to play for a few hours like when Windows installed the NVIDIA driver 327.02 and i was able to play for a few hours, note that 327.02 isn't compatible with my GPU)
    Any help will be very welcome. I payed a lot for this notebook, about 8000 BRL or 4000 USD 2 years ago. It was a real sacrifice. The purpose is just gaming.
    The computer has 2 years old, and always did its job perfectly.
    Thank You in advance.
    PS: sorry for any spelling mistakes, my native language is portuguese.
    This is my CM log on the Google Drive link: https://drive.google.com/file/d/0By9o-5-KwEGDRk1jQWhtWmZLWmc/view?usp=sharing

    Quote from: zaipec on 11-May-15, 12:25:36
    Well, i am a bit disappointed with MSI, i spent one whole year gathering money to buy this notebook, here in my country, everything is very expensive, so i payed 4000 USD for a "not very powerfull" gaming notebook, and he came with a throttling problem, was a pain in the a** to fix it, and now he is almost useless, i cannot play games, the purpose of this notebook has been compromised with those BSODs.
    And i can't buy another mobile GPU, here in my country a common GTX 970 costs up to 700 USD, so imagine how much would cost a mobile GTX... and i think that i wouldn't be able to find mobile GPUs for sale here.
    By the way, i live in Brazil.
    And the 675m is more fragile because it's architecture is Fermi, the GTX 670m and 680m are both Kepler, which is way better than Fermi.
    If anyone has any possible help, please help, it will be a great sacrifice to build a new computer.
    Maybe you can send the laptop back in for RMA. I have seen a user here mentioned MSI RMA would provide GPU upgrade when they run out of the spare parts. So maybe you can get a new mobile GPU from them, it may not be cheap though.

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • The window 8 store and all other app open and then close immediately .

    The window 8 store and all other app open and then close immediately .I
    have tried many methods like sfc /scannow,, powershell
    -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !

    Hi ObaidMaki,
    This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
    I would suggest you posting it in the dedicated Windows Forum
    http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows 7 desktop and windows 8 desktop connected to router

    I have a windows 7 64 bit desktop and a 7510 e photosmart printer connected wireless, though the desktop is wired, I purchased a windows 8 desktop and connected it to my router and set up my email account and it did pick up my printer and could print but not scan or EFax, now I get a 1625 message and cannot print from it.
    I tried to download the print and scan wizard from HP web site but my PC froze up.
    Do i have to run the disc or set up a home group, not bothered about being able to E Fax or scan to email with it, just need it to print as it did before.
    Also on my windows 7 I can log into HP connected and my printer shows up ok, when I press the icon on the printer for Eprint it shows my HP email address but when I press the Fax icon it says NOT CONNECTED TO ANY NETWORK. Cloud services set up a static IP address for me last year as each time we had a power outage I lost my connection to my printer. If anyone can help I would appreciate it.
    This question was solved.
    View Solution.

    Emma22, welcome to the forum.
    Here is the Win 8 driver for the printer.  Installing them should correct your problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login new one they given the error. Pls help

    I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login they given the error. Pls help

    This may help, it allows you to reset the application, it also may be worth clearing out the app store cache and temp files.
    http://www.ryanragle.com/index.php?/site/comments/where-does-the-mac-app-store-d ownload-temp-files-to
    To contact Apple use the feedback form, this is a user forum and I don't think they will respond here.
    regards

  • Dual boot Windows 7 (64) and Arch Linux (64) problems

    Hello:
    I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
    Disk Drive: /dev/sda
    Size: 160041885696 bytes, 160.0 GB
    Heads: 255 Sectors per Track: 63 Cylinders: 19457
    Name Flags Part Type FS Type [Label] Size (MB)
    sda1 Primary Unknown (27) 12889.02
    sda2 Boot Primary NTFS 106.93
    sda3 Primary NTFS [] 73915.11*
    sda5 Logical Linux ext2 65.81*
    sda6 Logical Linux 509.97*
    sda7 Logical Linux ext2 15002.92*
    sda8 Logical Linux ext2 57549.55*
    The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
    In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/sda3 ro
    initrd /kernel26.img
    My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
    Any help would be greatly appreciated.

    I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
    setup hd(0,1)
    Checking if "/boot/grub/stage1" exists.....yes
    Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
    Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
    Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
    Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
    Error 31: File is not sector aligned
    My entry for Windows into the menu.lst looks like this:
    # (0) Arch Linux x64
    title Arch Linux x64
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
    initrd /kernel26.img
    # (1) Arch Linux x64
    title Arch Linux x64 Fallback
    root (hd0,4)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
    initrd /kernel26-fallback.img
    # (2) Windows 7
    title Windows 7
    rootnoverify (hd0,0)
    makeactive
    chainloader +1

  • Dual boot WIndows 8.1 and Windows 7 (32 bits) from separated disks gives error 0XC0000359

    Hi all,
    I have two disks, each with a (OEM) installed OS on it, a Windows 8.1 (64 bits) and Windows 7.0 (32 bits). The later came from mine old computer that unfortunately died to soon. So I have two disks and two OS in an brand new machine (with UEFI BIOS etc.).
    Installing a dual boot option was a pace of cake. However booting into Windows 7.0 gives following error:
    "Windows failed to start. A recent hardware of software change might be the cause. 
      File:\Windows\system32\winload.exe.
      Status: 0XC0000359
      Info: the application or operating system could't be loaded because a required file is missing or contains errors".
    There is lot discussions about installing two OS but that is not mine problem: both are already installed.
    Also there is much rumour about the UEFI BIOS and support for older systems. In mine medion computer the Security Boot option is disabled (by the OEM), so booting from a old BIOS should be possible, must isn't.
    Someone advised me to run the recovery disk (of Windows 7.0) and run Bootmgr. However the system refuses to boot from CD/DVD with the recovery disk of Windows 7.0 inserted, booting from the recovery disk of Windows 8.1. goes fine.
    Removing the disk with Windows 8.1 installed on it  and directly booting in Windows 7.0 fails too with the message: "Reboot and Select proper boot device or: Insert boot media in selected boot device and press key". Also in this case the system
    refuses to boot from the Windows 7.0 recovery disk.
    Could you please help me?

    Hi,
    To rebuilt boot loader, I suggest we can try following command when you enter Windows 8.1.
    Run cmd as administrator and type following command:
    BCDboot [Partition Letter with windows 7 installed]:\windows
    Note: if you installed Windows 7 on Partition F, the command can be write as: BCDboot F:\windows.
    Then, restart and boot into Windows 7.
    What’s going on?
    Kate Li
    TechNet Community Support

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • Trouble with Windows 8.1 and hp officejet 8620

    Hi, we've installed a brand new hp Officejet Pro 8620.
    We've installed the full software package on a Windows 8.1 machine.
    It all seemed to be fine, but suddenly our machine is not capable of print on certain circumstances:
    - It can't print from:
    a) Notepad: "incorrect parameter" error message
    b) Office: Word, Excel, etc...    no error, but it simply does not print
    c) Adobe Acrobat: no error, but it simply does not print
    d) Test print from printer configuration: error
    but it CAN print from:
    a) hp printer assistant, hp print scan and doctor (hp software)
    b) hp AiO printer remote (it's a Metro app), only pdfs
    c) Internet Explorer, Google Chrome, etc...
    We've tried to reinstall the whole package with no success. It seems that's something's wrong with the driver and desktop applications, any ideas? Anyone with similar problem?
    Best,

    This question was solved.
    View Solution.

    Finally we've used the proposed solution on:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Is-Windows-8-1-and-HP-8620-compatible/t...
    The trick is drivers for 8600 must be downloaded and installed before the change. 8600 drivers included with 8.1 don't work.
    We'll wait for new 8620 drivers that could fix this problem. Meanwhile, we can print with 8600 drivers, and scan with 8620 drivers.
    Best,
    JM

  • How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

    How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

    I am so sorry for you and your situation. Were you using iCloud photostream?
    Otherwise I do not see any chance for your precious photos.
    Congrats anyway on the little darling!

  • Windows Phone sync and transfer options

    This post explains the options available for synchronizing and transferring contacts, calendar and tasks from your Windows PC to a Nokia Lumia with Windows Phone.
    How Contacts, Calendar and Tasks are synchronized between a Windows PC and a Lumia family phone depends on which software is used on the PC
    If a S40, S60 or Symbian Nokia phone was used before contacts, calendar and tasks can be synchronized between this phone and your PC using Nokia Suite with the following:
    Microsoft Windows 7 contacts
    Microsoft Windows Vista calendar and contacts
    Microsoft Outlook 2002, 2003, 2007, 2010
    Microsoft Outlook Express
    Mozilla Thunderbird
    Nokia Suite (v3.6.x and later) allows for an easy transfer of contacts, calendar and photos to your Nokia Lumia Windows Phone via SkyDrive.
    Here's how this feature works;
    Connect your Nokia S40, S60 or Nokia Belle phone to your PC using the USB cable.
    After Nokia Suite is started and your phone shows as connected select Tools>Upload to SkyDrive and follow the on screen instructions. If you do not have one yet you will have to create a Microsoft account which has a SkyDrive attached to it. You can create such account here.
    You will now have to reset your Nokia Lumia Windows Phone. Doing so will erase all content from the phone and return it to it's 'out of the box' state. Make sure you have synced any media files to your PC (Zune for WP7.x devices / copy them through explorer on WP8.x devices) or Mac(Connector). You can sync these back after the reset. When finished reset your Nokia Lumia Windows Phone using Settings>about>reset your phone.
    Go through the Device First Use sequence and when asked enter your Microsoft Account used to save the content from Nokia Suite. When the setup has finished your will find your contacts, calendar and photos have all transferred to your Lumia. These will also be available through your Microsoft account through the web interface. The list of installed (paid) apps is also restored and the phone will start downloading these once the restore is complete. You can switch to WiFi for this if you have access.
    It is important to note this transfer will only work to the Nokia Lumia at the Device First Use sequence (after a reset). If you have your Lumia setup it will not look for or sync the information copied to SkyDrive through Nokia Suite.
    SMS message can not be transferred directly, but you can export all messages in Nokia Suite (Messaging>File/Export all text messages) and open the resulting Comma Separated File (.csv) in Excel or OpenOffice Calc to create an Excel sheet (.xls file) this can then be copied to your SkyDrive and opened from the Office app. You could also use a tool to create separate files from the exported .CSV file and copy all of these to SkyDrive.
    If a Microsoft Exchange server is used an Outlook account is created on the Lumia. This is done through 'Settings > email + accounts >add an account > Outlook'. The following settings are required. Usually these can be obtained from the system administrator for the Exchange server:
    Mail address
    User name (usually the same as the login name for the business PC)
    Password (usually the same as the password for the business PC)
    The Microsoft Exchange server Domain
    The address for the Microsoft Exchange server
    If Microsoft Outlook is used for private mail account(s) the Outlook Hotmail Connector needs to be installed to synchronize with the primary Microsoft Account and with the Lumia.
    The mail account needs to be set up as a separate mail account through:
    'Settings > email + accounts >add an account > other account'
    More information on setting up a mail account can be found here.
    A useful tool for setting up the Outlook Hotmail Connector can be found here.
    Additional Microsoft support pages for contacts and calendar.
    If Windows Mail, a part of Windows Essentials, is used contacts, calendar and tasks are synchronized directly with the Lumia as long as you log in to Windows Mail using the same primary Microsoft Account as the one which is used on the Lumia. Contacts and/or calendar can be imported in to Windows Mail as follows:
    Microsoft Windows 7 contacts, Microsoft Windows Vista contacts (and calendar)
    Open Windows live mail
    Go to contacts
    Click on import
    Import from current Windows user
    Mozilla Thunderbird
    Use the Hotmail extension for Thunderbird
    Export contacts and import into Windows Mail
    I hope this is helpful 
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

    Article updated, changed Live ID to Microsoft account and added procedure available in Nokia Suite from v3.6.x
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Jabber for Windows 9.1 and WebEx Voicemail Tab

    Guys
    we are using both Jabber for Windows (9.1) and WebEx connect clients. both connect to WebEx cloud services. when we use WebEx connect we have all features including voicemail but when we use Jabber for Windows there isnt any voicemail option at all present.
    both are doing phone integration and everything else is working fine.
    Now when we do the same for our andriod tablets we have the option for voicemail.
    i  understand that there are several feature differences but based on the searches ive been doing, voicemail should be present and i havent actually seen anyone having this problem. Note, this is using WebEx not CUPS.
    i know im probably missing something completely here.
    thanks again

    Do these users all have a conferencing profile assigned to them in CUCM (9.0) or CUPS (8.x)?
    Regards,
    Erik
    Sent from Cisco Technical Support iPad App

Maybe you are looking for